Lexmark 21Z0300 Maintenance Manual

Lexmark 21Z0300 - Laser Printer Government Compliant Manual

Get Lexmark 21Z0300 - Laser Printer Government Compliant PDF manuals and user guides
UPC - 734646048965
View all Lexmark 21Z0300 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark 21Z0300 manual content summary:

  • Lexmark 21Z0300 | Maintenance Manual - Page 1
    C935 Series Maintenance Guide April 2007 www.lexmark.com
  • Lexmark 21Z0300 | Maintenance Manual - Page 2
    ...6 Cleaning the printhead lenses ...10 Replacing a photoconductor...15 Replacing a toner cartridge...17 Recycling Lexmark products...19 Moving the printer...20 Before moving the printer ...20 Moving the printer to another location...20 Setting the printer up in a new location ...20 Shipping the
  • Lexmark 21Z0300 | Maintenance Manual - Page 3
    . 4 Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit tray. Warning-Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer. 5 Make sure the paper support and paper exit tray are dry before beginning
  • Lexmark 21Z0300 | Maintenance Manual - Page 4
    area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer. Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper. Ordering toner cartridges When 88 Cyan toner low, 88 Magenta toner
  • Lexmark 21Z0300 | Maintenance Manual - Page 5
    you must replace the specified toner cartridge. The recommended toner cartridges specifically designed for the printer are: Part name Cyan High Yield Toner Cartridge Magenta High Yield Toner Cartridge Yellow High Yield Toner Cartridge Black High Yield Toner Cartridge Part number C930H2CG C930H2MG
  • Lexmark 21Z0300 | Maintenance Manual - Page 6
    Replacing supplies Replacing the waste toner box Replace the waste toner box when 82 Replace waste toner box appears. The printer will not continue printing until the waste toner box is replaced. 1 Waste toner box 2 Door E6 3 Door E 4 Printhead lens cleaner 5 E6 Door tab Maintaining the printer 6
  • Lexmark 21Z0300 | Maintenance Manual - Page 7
    1 Unpack the replacement waste toner box and accessories. 2 Open Door E (front printer door). Warning-Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more than 10 minutes. 3 Grasp the E6 Door tab, and then push the door down. Maintaining the printer 7
  • Lexmark 21Z0300 | Maintenance Manual - Page 8
    4 Remove the old printhead lens cleaner from Door E, and then discard it. 5 Remove the waste toner box. 6 Place the plastic cover over the waste toner box. Maintaining the printer 8
  • Lexmark 21Z0300 | Maintenance Manual - Page 9
    7 Place the waste toner box in the recycling bag. 8 Use the new printhead lens cleaner to clean the printhead lenses. 9 Insert the new waste toner box. Maintaining the printer 9
  • Lexmark 21Z0300 | Maintenance Manual - Page 10
    the new printhead lens cleaner in the notches of Door E. 11 Close Door E6. 12 Close Door E. 13 Remove all paper from the printer paper path. Visit www.lexmark.com/recycling to learn how to recycle the waste toner box. Cleaning the printhead lenses Clean the printhead lenses when you replace the
  • Lexmark 21Z0300 | Maintenance Manual - Page 11
    1 Waste toner box 2 Door E6 3 Door E (front door) 4 Printhead lens cleaner 5 E6 Door tab 1 Open Door E (front door). Warning-Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more than 10 minutes. Maintaining the printer 11
  • Lexmark 21Z0300 | Maintenance Manual - Page 12
    2 Grasp the E6 Door tab, and then push the door down. 3 Remove the waste toner box. 4 Locate and remove the printhead lens cleaner from Door E. Note: If you are replacing the waste toner box, use the printhead lens cleaner that shipped with it. Maintaining the printer 12
  • Lexmark 21Z0300 | Maintenance Manual - Page 13
    5 Insert the padded tip of the printhead lens cleaner into the first printhead lens opening. 6 Push the printhead lens cleaner all the way to the back of the lens, and then pull it out. 7 Clean the remaining three printhead lenses. 8 Insert the waste toner box. Maintaining the printer 13
  • Lexmark 21Z0300 | Maintenance Manual - Page 14
    9 Place the printhead lens cleaner in the notches of Door E. 10 Close Door E6. 11 Close Door E. Maintaining the printer 14
  • Lexmark 21Z0300 | Maintenance Manual - Page 15
    Replace black pc unit appears. Replace the cyan, magenta, and yellow photoconductors when 84 Replace color pc units appears. 1 Open Door E (front printer door). Warning-Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more than 10 minutes. 2 Release the bar
  • Lexmark 21Z0300 | Maintenance Manual - Page 16
    4 Unpack the replacement photoconductor. 5 Align and insert the end of the photoconductor. 6 Remove the tape from the top of the photoconductor. Maintaining the printer 16
  • Lexmark 21Z0300 | Maintenance Manual - Page 17
    bar in position. 9 Close Door E. Replacing a toner cartridge Replace the specified toner cartridge (cyan, magenta, yellow, or black) when 88 Replace toner appears. The printer will not continue printing until the specified cartridge is replaced. 1 Make sure the printer is on and Ready or 88
  • Lexmark 21Z0300 | Maintenance Manual - Page 18
    3 Open Door E (front printer door). 4 Unlock the specified cartridge by turning the cartridge counterclockwise until the arrow‑shaped handle points toward the unlock symbol. 5 Remove the cartridge by gently pulling it away from the printer. Maintaining the printer 18
  • Lexmark 21Z0300 | Maintenance Manual - Page 19
    E. Recycling Lexmark products To return Lexmark products to Lexmark for recycling: 1 Visit our Web site at www.lexmark.com/recycle. 2 Find the product type you want to recycle, and then select your country from the list. 3 Follow the instructions on the computer screen. Maintaining the printer 19
  • Lexmark 21Z0300 | Maintenance Manual - Page 20
    used to move the options must have a surface able to support the dimensions of the options. • Keep the printer in an upright position. • Avoid severe jarring movements. Setting the printer up in a new location For a basic printer, or a printer with an optional finisher installed, allow the following
  • Lexmark 21Z0300 | Maintenance Manual - Page 21
    1 2 in. (50 mm) 2 2.7 ft (825 mm) 3 1.4 ft (418 mm) 4 4 in. (100 mm) 5 2.3 ft (693 mm) Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for a relocation kit. Maintaining the printer 21
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
C935 Series
Maintenance Guide
April 2007
www.lexmark.com