Lexmark 23B0225 Technical Reference
Lexmark 23B0225 - C 762dtn Color Laser Printer Manual
 |
UPC - 734646782265
View all Lexmark 23B0225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark 23B0225 manual content summary:
- Lexmark 23B0225 | Technical Reference - Page 1
Technical Reference March 2006 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2006 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550 - Lexmark 23B0225 | Technical Reference - Page 2
of printer commands (language) and functions included in its printer products. These printers are instructions, to a professional service person. • This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. © 1998, 2005 Lexmark - Lexmark 23B0225 | Technical Reference - Page 3
The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts. • emissions. You must understand the section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful - Lexmark 23B0225 | Technical Reference - Page 4
C760 and C762 2-4 Print Area Menu Item 2-5 Font and Symbol Set Support for the Lexmark C760 and C762 2-7 Forward and Backward Compatibility Modes for the Lexmark C760 and C7622-9 Selecting Symbol Sets for the Lexmark C760 and C762 2-14 Command Structure 2-31 Control Codes 2-31 Commands 2-31 - Lexmark 23B0225 | Technical Reference - Page 5
Intervention - Paper Handling 3-72 Operator Intervention - Paper Jams 3-75 Service Errors 3-80 Device Attendance Commands 3-80 Unique PJL Commands 3-82 File Your Software Program 4-2 Paper Tray Support 4-4 Envelope Size Support 4-9 Envelope Tray Support 4-11 Supplemental Operator Summary 4- - Lexmark 23B0225 | Technical Reference - Page 6
6-14 Enabling Job Buffering 6-14 Disabling Job Buffering 6-15 Recovering from a Power Loss 6-15 Printer Specifications 7-1 Airflow Requirement 7-1 Noise Emission Levels 7-1 Electrical Specifications 7-2 Power Requirements 7-2 Physical Specifications 7-3 ...7-3 Clearance Requirements - Lexmark 23B0225 | Technical Reference - Page 7
Communications 8-8 Printer-to-Computer Communication (Advanced Status 8-13 Parallel Mode 1 8-14 Parallel Mode 2 8-15 Signal Descriptions 8-15 Using the RS-232C Serial Interface 8-18 Network Support 8-28 Input Buffer ...8-29 PCL Support A-1 PJL Support B-1 PostScript Support C-1 Index - Lexmark 23B0225 | Technical Reference - Page 8
Overview The following edition of the Technical Reference contains information about printer commands and printer languages supported by the Lexmark C760 and C762 printers. To determine which commands and languages your printer supports, see the appendixes in the back of this document or see - Lexmark 23B0225 | Technical Reference - Page 9
Order Lexmark part number... 11A4079 11A9979 11C0905 12A2194 The Technical Reference is divided into the following: Chapter 2: "PCL Emulation" Shows how to select PCL emulation and discusses PCL emulation commands, GL/2 commands, and resident font and symbol set support. Chapter 3: "Printer Job - Lexmark 23B0225 | Technical Reference - Page 10
interfaces, including information about parallel and serial interface, network support, and communication protocols. See the tables in the three appendixes to determine if your printer supports a particular PCL emulation, PJL, or PostScript emulation command. The appendixes are: Appendix A: "PCL - Lexmark 23B0225 | Technical Reference - Page 11
for online viewing, you can print a hard copy by clicking File on the toolbar, and then choosing Print. Make sure you've selected the correct printer, range of pages, and number of copies before you click OK. You should be aware that if you print this document on a color - Lexmark 23B0225 | Technical Reference - Page 12
4 Typography and Graphics, Random House Electronic Publishing • Hewlett-Packard PCL 5 Color Technical Reference Manual, 5961-0635 • Hewlett-Packard PCL 5 Printer Language Technical Reference Manual, 5961-0509 • Hewlett-Packard PostScript SIMM Technical Reference, I/O Device Operators and Parameters - Lexmark 23B0225 | Technical Reference - Page 13
to select PCL emulation and discusses PCL emulation commands, along with resident PCL emulation font and symbol set support. To determine which commands your printer supports, see Appendix A: "PCL Support" on page A-1. Selecting PCL Emulation Using SmartSwitch When SmartSwitch is enabled for both - Lexmark 23B0225 | Technical Reference - Page 14
(PJL) Enter Language Command. See "ENTER LANGUAGE Command" on page 3-3 for more information. See "Printer Job Language" on page 3-1 for the syntax and use of PJL. Warning: When you change printer languages, you may lose some or all previously downloaded resources, unless Resource Save is set to On - Lexmark 23B0225 | Technical Reference - Page 15
on page 2-4 list the page sizes and dimensions of each area labeled on the preceding diagram for all paper and envelope sizes your printer supports. If information about your printer is not included in the following tables, see page 1-1 for information on how to get a Technical Reference for your - Lexmark 23B0225 | Technical Reference - Page 16
2-36. 3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application. 4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet - Lexmark 23B0225 | Technical Reference - Page 17
2-36. 3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application. 4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet - Lexmark 23B0225 | Technical Reference - Page 18
PCL The Print Area menu item is available from the printer operator panel or through MarkVision Professional. For some printers, Print Area supports three values: Normal, Whole Page, and Fit to Page. See your printer documentation for more information. Normal setting Whole Page setting Legend - Lexmark 23B0225 | Technical Reference - Page 19
edge to the other, since doing so could contaminate the printer and cause printing problems. The following illustrations show an image held in memory for Image with Fit to Page Font and Symbol Set Support for the Lexmark C760 and C762 Your printer has 91 resident fonts in PCL emulation, including - Lexmark 23B0225 | Technical Reference - Page 20
documentation for more information. A symbol set defines which characters are available for a font and the code point for each of these characters. Your printer supports 88 resident symbol sets. The tables beginning on page 2-10 show the symbol sets available for each font in PCL emulation. Not all - Lexmark 23B0225 | Technical Reference - Page 21
Company's LaserJet 4050. The backward compatibility mode is used for compatibility with the Hewlett-Packard Company's LaserJet 5 and the Lexmark family of printers. Standard PCL Emulation Fonts The following table lists the font selection commands for forward and backward compatibility mode for - Lexmark 23B0225 | Technical Reference - Page 22
Antique Olive Bold 1 0 3 Albertus Medium 1 0 1 Albertus Extra Bold 1 0 4 Clarendon Condensed Bold 1 4 3 Marigold 1 0 0 Coronet 1 1 0 Line Printer 16 POSTNET Barcode 1 0 0 0 1 0 0 Wingdings 1 0 0 Symbol 1 0 0 1 This font is not implemented in the Hewlett-Packard - Lexmark 23B0225 | Technical Reference - Page 23
fonts work only in the forward compatibility mode. With the appropriate printer driver installed and selected, your software program selects these fonts. The Type 1 fonts are supported by both the Hewlett-Packard Company's LaserJet 4050 and the Lexmark family of printers unless otherwise noted. - Lexmark 23B0225 | Technical Reference - Page 24
4050. 3 This font is not implemented in the Lexmark family of printers. Your Lexmark printer defaults to the forward compatibility mode to enable a Hewlett-Packard Company's driver to select the forward compatibility fonts. The Lexmark PCL driver uses the backward compatibility mode and temporarily - Lexmark 23B0225 | Technical Reference - Page 25
selection commands for the forward and backward compatibility modes are identical, they are listed together in the table. These fonts are supported only in PCL 5, not in PCL XL. Table 2-4: Forward and Backward Compatibility Font Selection Commands Forward and Backward Compatibility Mode Standard - Lexmark 23B0225 | Technical Reference - Page 26
2-14 PCL Selecting Symbol Sets for the Lexmark C760 and C762 To determine if a font or typeface supports a symbol set, see the complete listing of PCL emulation fonts and symbol sets in the following tables: "Table 2-5: PCL Emulation Symbol Sets - Latin 1" on page 2- - Lexmark 23B0225 | Technical Reference - Page 27
Univers Condensed Medium Italic Univers Condensed Bold Univers Condensed Bold Italic Garamond Antiqua Garamond Kursiv Garamond Halbfett Garamond Kursiv Halbfett CG Omega Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 28
Helvetica Italic Helvetica Bold Helvetica Bold Italic Helvetica Narrow Helvetica Narrow Italic Helvetica Narrow Bold Helvetica Narrow Bold Italic Palatino Roman Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 29
Schoolbook Italic Century Schoolbook Bold Century Schoolbook Bold Italic ITC Zapf Chancery Medium Italic CourierPS CourierPS Oblique CourierPS Bold CourierPS Bold Oblique Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 30
Times Bold Times Bold Italic Helvetica Light Helvetica Light Oblique Helvetica Black Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular C39 Wide OCR-A OCR-B Wingdings Symbol SymbolPS ITC Zapf - Lexmark 23B0225 | Technical Reference - Page 31
Bold Univers Bold Italic Times New Roman Times New Roman Italic Times New Roman Bold Times New Roman Bold Italic Arial Arial Italic Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 32
Garamond Antiqua Garamond Kursiv Garamond Halbfett Garamond Kursiv Halbfett CG Omega CG Omega Italic CG Omega Bold CG Omega Bold Italic Antique Olive Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 33
Bold Italic Helvetica Narrow Helvetica Narrow Italic Helvetica Narrow Bold Helvetica Narrow Bold Italic Palatino Roman Palatino Italic Palatino Bold Palatino Bold Italic Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 34
Avant Garde Demi Oblique Century Schoolbook Roman Century Schoolbook Italic Century Schoolbook Bold Century Schoolbook Bold Italic ITC Zapf Chancery Medium Italic CourierPS Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 35
Helvetica Light Oblique Helvetica Black Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular C39 Wide OCR-A OCR-B Wingdings Symbol Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 36
Dingbats 14L PCL ITC Zapf Dingbats Specials Table 2-7: PCL Emulation Symbol Sets - Specials Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. ITC Zapf Dingbats SymbolPS Symbol Set ID PJL Value Typeface / Symbol Set - Lexmark 23B0225 | Technical Reference - Page 37
Times New Roman BoldItalic Arial Arial Italic Arial Bold Arial Bold Italic Letter Gothic Letter Gothic Italic Letter Gothic Bold Univers Condensed Medium Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 38
Antique Olive Antique Olive Italic Antique Olive Bold Albertus Medium Albertus Extra Bold Clarendon Condensed Bold Marigold Coronet Helvetica Helvetica Italic Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 39
ITC Avant Garde Book Oblique ITC Avant Garde Demi ITC Avant Garde Demi Oblique Century Schoolbook Roman Century Schoolbook Italic Century Schoolbook Bold Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 40
Helvetica Light Helvetica Light Oblique Helvetica Black Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular C39 Wide OCR-A OCR-B Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 23B0225 | Technical Reference - Page 41
Wingdings Symbol SymbolPS ITC Zapf Dingbats Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. All fonts that support the Roman-8 (8U) symbol set also support the following 19 symbol sets. Table 2-8: ISO PCL - Lexmark 23B0225 | Technical Reference - Page 42
2-30 PCL Table 2-8: ISO PCL Emulation Symbol Sets (Continued) Symbol Set ID Symbol Set / Typeface 2K ISO 57: Chinese 3S ISO 10: Swedish 1S ISO: HP Spanish 6S ISO 85: Spanish 4S ISO 16: Portuguese 5S ISO 84: Portuguese 1D ISO 61: Norwegian Version 2 - Lexmark 23B0225 | Technical Reference - Page 43
commands to abbreviate them. Control Codes Control Codes are single-character instructions. Table 2-9: Control Codes Code Dec Hex Function BS 8 ←, decimal 27, or hexadecimal 1B). The ESC control code notifies the printer that the characters that follow are to be interpreted as part of a - Lexmark 23B0225 | Technical Reference - Page 44
of each printed page begins at column 63. That margin stays constant until a right margin command with a different value resets it or until the printer is reset. Parameters for each command are listed in the command tables beginning on page 2-34. Use the Symbol Set Tables to determine the decimal - Lexmark 23B0225 | Technical Reference - Page 45
2-33 PCL Example: ESC(s16.66H • Decimal: 27 40 115 49 54 46 54 54 72 • Hex: 1B 28 73 31 36 2E 36 36 48 Use the plus symbol (+) or the minus symbol (-) to select a position relative to the current cursor position. For example: ESC&a6C ESC&a+6C ESC&a-6C Move to horizontal cursor position, column - Lexmark 23B0225 | Technical Reference - Page 46
commands grouped by function. To determine which commands your printer supports, see "Table A-1: PCL Emulation Commands" on Sided (Default) 1 Duplex Long-Edge Binding 2 Duplex Short-Edge Binding 100 Manual Duplex First Sides 101 Manual Duplex Second Sides l ESC& #U # = number of Decipoints Range = - - Lexmark 23B0225 | Technical Reference - Page 47
data for bitmapped fonts, raster graphics, or user defined fill patterns. ESC% - 12345X Universal Exit Language (UEL) / Start of PJL This command terminates the current printer language and allows switching into PJL. For more information, see "UNIVERSAL EXIT LANGUAGE Command" on page 3-2. - Lexmark 23B0225 | Technical Reference - Page 48
0 Active Source or Eject Page 1 Tray 1 (Default) 2 Manual Paper Feed 3 Manual Envelope Feed 4 Tray 2 5 Tray 3 6 Optional Envelope Feeder tables beginning on page 2-4 for the paper and envelope dimensions your printer supports. If the requested page size is not in the requested source - Lexmark 23B0225 | Technical Reference - Page 49
of Universal size. Feed direction means which side of the print media, either the short edge or the long edge, feeds through the printer first. Set Universal Custom Name Sets the user-specified custom name for the Universal paper size being used. Select Orientation Specifies the position of - Lexmark 23B0225 | Technical Reference - Page 50
Motion Index (VMI) Sets Vertical Motion Index in 1/48 inch increments. The VMI determines the vertical distance between lines. Notes: • For some printers, you can change the default VMI from the printer operator panel or through MarkVision Professional by using the Lines Per Page menu item. See your - Lexmark 23B0225 | Technical Reference - Page 51
Mode OFF Turn Text Scale Mode ON Function / Result Set Line Spacing (Alternative Method) Specifies VMI in lines per inch. Notes: • For some printers, you can change the default VMI from the printer operator panel or through MarkVision Professional by using the Lines Per Page menu item. See your - Lexmark 23B0225 | Technical Reference - Page 52
2-40 PCL Table 2-13: Alphanumeric ID Command / Parameters ESC&n#W [operation] [string] # = number of data bytes that make up the operation and string Operation operation = 100 or 1 byte = 0x64 or 'd' ascii For example: 100 Media Select String string = See Alphanumeric String list at - Lexmark 23B0225 | Technical Reference - Page 53
Line-Feed Moves the cursor down 1/2 line (1/2 of the current VMI). ESC&k#G Set Line Termination 0 CR=CR, LF=LF, FF=FF (Default) Controls how the printer responds to the Carriage Return (CR), Line 1 CR=CR+LF, LF=LF, FF=FF Feed (LF), and Form Feed (FF) control codes. 2 CR=CR, LF - Lexmark 23B0225 | Technical Reference - Page 54
physical traits of a character and the composition of the font symbols. Note: You can only use this command to select fonts currently available in the printer. It cannot alter the appearance of the available fonts. - Lexmark 23B0225 | Technical Reference - Page 55
of typeface numbers, see Table 2-2 on page 2-9 and "Font and Symbol Set Support for the Lexmark C760 and C762" on page 2-7. ESC(#X (primary) ESC)#X (secondary) # = the font list from the printer operator panel or through MarkVision Professional. See your printer documentation for more information. On - Lexmark 23B0225 | Technical Reference - Page 56
2-44 PCL Table 2-15: Font Selection (Continued) Command / Parameters Function / Result ESC&t#P Text Parsing Method 0, 1 21 31 38 1008 1 byte characters 1 or 2 byte characters 1 or 2 byte characters 1 or 2 byte characters 1, 2, or 3 byte characters (UTF-8) Communicates to the PCL parser - Lexmark 23B0225 | Technical Reference - Page 57
ID Sets the ID for the macro you have created on flash or disk. Macro Control Manages use of macros. Notes: • GL/2 commands are supported inside macros. • Only call and execute macro commands are allowed within a macro. • A macro may call or execute another macro. This is called nesting. A maximum - Lexmark 23B0225 | Technical Reference - Page 58
2-46 PCL Table 2-19: Print Model Command / Parameters ESC*c#G Gray Scale Fills 0 1-2 3-10 11-20 21-35 36-55 56-80 81-99 100 White (default) 2% gray 10% gray 15% gray 30% gray 45% gray 70% gray 90% gray 100% gray (Black) Cross-Hatch Fills 1 Horizontal line 2 Vertical line 3 Diagonal - Lexmark 23B0225 | Technical Reference - Page 59
2-47 PCL Table 2-20: User-Defined Pattern Command / Parameters ESC*c#W[data] # = number of data bytes ESC*p#R 0 Rotate with print (Default) 1 Fixed ESC*c#Q 0 Delete all patterns (temporary and permanent) 1 Delete all temporary patterns 2 Delete pattern (last ID specified) 4 Make pattern of last ID - Lexmark 23B0225 | Technical Reference - Page 60
2-48 PCL Table 2-21: Rectangular Area Fill Graphics (Continued) Command / Parameters ESC*c#G Gray Scale Fills 0 1-2 3-10 11-20 21-35 36-55 56-80 81-99 100 White (default) 2% Gray 10% Gray 15% Gray 30% Gray 45% Gray 70% Gray 90% Gray 100% Gray (Black) Cross-Hatch Fills 1 Horizontal Line 2 - Lexmark 23B0225 | Technical Reference - Page 61
On ESC*b#V[data] # = Number of Data Bytes ESC*b#Y # = Number of Raster Lines Function / Result Raster Resolution Note: 200 dpi is only supported when the printer is operating in 600 dpi or 1200 dpi mode. Raster Graphics Presentation Sets the Raster Image Orientation in relation to the logical - Lexmark 23B0225 | Technical Reference - Page 62
2-50 PCL Table 2-22: Raster Graphics (Continued) Command / Parameters ESC*b#M 0 1 2 3 5 9 999 1002 1003 1004 1005 1006 1007 1008 Uncoded (Default) Run-Length Encoded Tagged Image File Format (TIFF) byte Delta Row Adaptive Compression Replacement Delta Row Zlib Group 4 Group 3 one dimensional - Lexmark 23B0225 | Technical Reference - Page 63
2-51 PCL Table 2-22: Raster Graphics (Continued) Command / Parameters ESC*t#V ESC*g#W[data] # - 8 (K-only) or 26 (KCMY) Data Byte 0 - 0x02 (constant) Byte 1 - number of colors 0x01 - K only 0x04 - CMYK Byte 2,3 - X res for K plane 0x012C (300) or 0x0258 (600) Byte 4,5 - Y res for K plane 0x012C ( - Lexmark 23B0225 | Technical Reference - Page 64
data that specifies a matrix or matrices for the primary colors Downloads a device dependent user-defined dither matrix. ESC*o#W[data] Driver Configuration Command 1 to 32767, Data Specifies lightness, saturation, and image scaling Indicates the lightness, saturation, and scaling algorithm to - Lexmark 23B0225 | Technical Reference - Page 65
2-53 PCL Table 2-23: Color Extensions (Continued) Command / Parameters ESC*t#I 0 0.0 to 4.0 Gamma Correction Off Gamma Number ESC*t#J ESC*v#A -32767.0 to 32767.0 ESC*v#B -32767.0 to 32767.0 ESC*v#C -32767.0 to 32767.0 ESC*v#I # = Palette Index 0 to 2n - 1 = Palette Index ESC*v#S # = Palette - Lexmark 23B0225 | Technical Reference - Page 66
Set Status Readback Location Type Sets the status location type to the specified value. The 5 value for Cartridge may be specified, but since your printer does not support font cards or cartridges, the command is ignored. The 7 value for User-installable flash is only valid when flash memory is - Lexmark 23B0225 | Technical Reference - Page 67
2-55 PCL Table 2-25: Picture Frame Command / Parameters ESC*c#X # of Decipoints: 0 to 32767 (1 Decipoint = 1/720 inch) ESC*c#Y # of Decipoints: 0 to 32767 (1 Decipoint = 1/720 inch) ESC*c0T 0 Set Anchor Point to Cursor Position ESC*c#K Size in inches: 0 to 32767 ESC*c#L Size in inches: - Lexmark 23B0225 | Technical Reference - Page 68
Miscellaneous Commands (Continued) Command / Parameters ESCZ ESCz ESC*o#M(b) -1 Ink Saver 0 Normal 1 Best l ESC& #M(b) 0 Plain Paper printer driver written explicitly for GL/2. The following tables list the GL/2 commands by group. To determine which GL/2 commands your printer supports - Lexmark 23B0225 | Technical Reference - Page 69
2-57 PCL Table 2-27: Configuration Group (Continued) Command / Parameter IR (XP1, YP1(, XP2, YP2)); IW (X1, Y1, X2, Y2); MC (mode(, opcode)); PP (mode); RO (angle); SC (Xmin, Xmax, Ymin, Ymax(, type(, left, bottom))); Command Name Input Relative P1 and P2 Input Window Logical Operation Pixel - Lexmark 23B0225 | Technical Reference - Page 70
2-58 PCL Table 2-29: Polygon Group (Continued) Command / Parameter RA X, Y; RR X, Y; WG radius, start_angle, sweep_angle(, chord_angle); Command Name Fill Rectangle Absolute Fill Rectangle Relative Fill Wedge Table 2-30: Character Group Command / Parameter AD (kind, value(,...)); CF (mode(, pen - Lexmark 23B0225 | Technical Reference - Page 71
2-59 PCL Table 2-31: Line and Fill Attributes Group Command / Parameter AC (X, Y); CR (red black ref, red white ref, green black ref, green white ref, blue black ref, blue white ref); FT (fill_type(, option1(, option2)); FT22, (PCL User-Defined Pattern ID); FT 9, level; LA (kind, value(,...));. LT - Lexmark 23B0225 | Technical Reference - Page 72
height and width, and start raster graphics. These parameters are in effect until you overwrite them with a different command or there is a printer reset. To ensure that the printed image appears in the expected area, set width and height parameters. Raster Compression Mode The Raster Compression - Lexmark 23B0225 | Technical Reference - Page 73
2-61 PCL Descriptions and examples of the different parameters appear on the following pages. Each example draws the same square outline 64 bits (8 bytes) wide by 64 scan lines long. Uncoded Data Uncoded Data is not compressed. Only those bytes needed to form the image are sent. Each bit - Lexmark 23B0225 | Technical Reference - Page 74
2-62 PCL Run-Length Encoded Data Run-Length Encoded Data is interpreted in pairs of bytes. The first byte: • Acts as a counter, or control byte. • Indicates how many times to repeat the data in the second byte. • Can be from 0 (no repetition) to 255. • The second byte is the data byte. Example: - Lexmark 23B0225 | Technical Reference - Page 75
2-63 PCL Delta Row Delta Row is a compression mode that identifies and transmits only those bytes different from the ones in a preceding row. The control byte consists of two parts: • High 3 bits: Number of bytes to replace +1 (1 to 8). • Low 5 bits: Offset from last unmodified byte (0-30); if - Lexmark 23B0225 | Technical Reference - Page 76
2-64 PCL Adaptive Compression Adaptive compression allows the combined use of compression methods 0 through 3 (Uncoded, Run-Length Encoded, TIFF, and Delta Row). It also allows the printing of empty rows (all zeros) or duplicate rows. • The Transfer Raster Data command size includes all rows (scan - Lexmark 23B0225 | Technical Reference - Page 77
use line endings, the width of the image must be specified using the Raster Width command (ESC*r#S). The compressed image data is sent to the printer using the Transfer Raster Data command (ESC*b#W). The maximum number of bytes that can be sent using the Transfer Raster Data command is 32K bytes - Lexmark 23B0225 | Technical Reference - Page 78
in the Raster Width command (ESC*r#S), the image is clipped at print time. Additional Compression Modes When the compression mode is 1008 (Lexmark Adaptive), TIFF word and doubleword can be printed using compression scan modes 254 and 255 respectively. This compression method sends a raster image - Lexmark 23B0225 | Technical Reference - Page 79
2-67 PCL Macros When creating a macro, first assign it an ID number. If this number is identical to an existing macro ID in RAM, the old macro is deleted when you specify the Macro Control Start Definition. Next, start the macro definition, send the contents of the macro, and stop the macro - Lexmark 23B0225 | Technical Reference - Page 80
Language (PJL) commands, including certain commands that cause the printer to enter PCL emulation, PostScript emulation, and Personal Printer Data Stream (PPDS). To determine which commands your printer supports, see Appendix B: "PJL Support" on page B-1. PJL Command Notation The syntax for each - Lexmark 23B0225 | Technical Reference - Page 81
and allows dynamic switching into PJL. Syntax: %-12345X Notes: • If the printer receives this command while in PCL emulation, it performs a Printer Language Reset (ESCE) before exiting PCL emulation. • If the printer receives this command while in PostScript emulation, it performs an End-of-Job - Lexmark 23B0225 | Technical Reference - Page 82
. COMMENT Command This command lets you add descriptive comments to your PJL job. Syntax: @PJL COMMENT words[] Notes: • When the printer receives this command, it is ignored. • The words parameter can be any combination of printable characters, spaces, and horizontal tabs. • The COMMENT - Lexmark 23B0225 | Technical Reference - Page 83
operator panel display or through MarkVision Professional until an EOJ command is received or until the print timeout expires. Your printer also supports the PASSWORD parameter for the PJL JOB command. JOB Command The host computer can use the JOB command to separate print data into various parts - Lexmark 23B0225 | Technical Reference - Page 84
is from 1 to 2,147,483,647. Omission of the START parameter causes the printer to start printing with page 1 of the job. END = last page Use the range is from 1 to 2,147,483,647. Omission of the END parameter causes the printer to print all pages to the end of the job. PASSWORD = number A system - Lexmark 23B0225 | Technical Reference - Page 85
3-6 PJL For detailed information on PJL password protection, see "File and Device Protection Commands" on page 3-93. Note: Setting a default PJL password disables the use of PJL DEFAULT and INITIALIZE commands. (See "DEFAULT Command" on page 3-8 and "INITIALIZE Command" on page 3-11.) EOJ Command - Lexmark 23B0225 | Technical Reference - Page 86
common to both your printer and the Hewlett-Packard Company's LaserJet printers. Table 3-2: Environment Variable Categories Categories Common Variables for Both Printer Languages Printer Unique Variables for Both Printer Languages Common Variables for PCL emulation Printer Unique Variables for PCL - Lexmark 23B0225 | Technical Reference - Page 87
parameter specifies the type of PJL variables to be modified. The variables supported are listed in the tables beginning on page 3-12. • A [command the tables "Common Variables for PCL Emulation" on page 3-48, and "Printer Unique Variables for PCL Emulation" on page 3-49.) • LPARM:POSTSCRIPT is - Lexmark 23B0225 | Technical Reference - Page 88
any currently defined environment variable that cannot be set using the desired printer language. For example, use the PJL SET command to set Print ] parameter specifies the type of PJL variables to be modified. The variables supported are listed in the tables beginning on page 3-12. • A [command - Lexmark 23B0225 | Technical Reference - Page 89
.filetype" is required for LRESOURCE variables. (See "Table 3-9: Printer Unique LRESOURCE Variables" on page 3-53.) Values for "device:filename 3-87 for a complete list of the supported file types. The filetype is case sensitive. variable=value The supported variables and values are listed in the - Lexmark 23B0225 | Technical Reference - Page 90
" on page 3-53. Syntax: @PJL INITIALIZE[] RESET Command This command resets the current environment variables to the settings stored in the printer NVRAM. Therefore, any variables modified by the PJL SET command are returned to their default value after execution of the PJL RESET command - Lexmark 23B0225 | Technical Reference - Page 91
Languages Note: The word common applies to those variables common to both your printer and the Hewlett-Packard Company's LaserJet printers. The following common variables are supported for both PCL emulation and PostScript emulation, unless otherwise noted. Therefore, the [command modifier:value - Lexmark 23B0225 | Technical Reference - Page 92
HOLD (SET only) HOLDKEY (SET only) To determine the default value of your printer, see "Table B-1: Common Variables for Both Printer Languages" on page B-1. Duplex ON, OFF OFF Toner Saver ON, OFF OFF Unique printer identifier The value of the NVRAM serial number field is returned. Set by - Lexmark 23B0225 | Technical Reference - Page 93
3-14 PJL Table 3-3: Common Variables for Both Printer Languages (Continued) Variable HOLDTYPE (SET only) IMAGEADAPT (DEFAULT only) INTRAY2 INTRAY3 INTRAY4 INTRAY5 INTRAY1SIZE (SET only) INTRAY2SIZE (SET only) INTRAY3SIZE (SET only) INTRAY4SIZE (SET only) - Lexmark 23B0225 | Technical Reference - Page 94
Table 3-3: Common Variables for Both Printer Languages (Continued) Variable JOBOFFSET LANG (DEFAULT only) LOWTONER (DEFAULT only) MANUALFEED (READ only) MEDIATYPE MPTRAY (DEFAULT only) ORIENTATION Function Offset Pages Default display language Toner Alarm Manual feed selection Default paper source - Lexmark 23B0225 | Technical Reference - Page 95
3-16 PJL Table 3-3: Common Variables for Both Printer Languages (Continued) Variable OUTBIN Function Output Bin Selections UPPER, LOWER, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, OPTIONALOUTBIN6, OPTIONALOUTBIN7, OPTIONALOUTBIN8, OPTIONALOUTBIN9, - Lexmark 23B0225 | Technical Reference - Page 96
, SLOW is returned. • If Parallel Protocol is set as Fastbytes, FAST is returned. 0 to 65535 0 Locks the printer operator panel to keep the user defaults from changing. See your printer documentation for more information. The Default PJL password is 0. If the PJL password is not equal to - Lexmark 23B0225 | Technical Reference - Page 97
SET or DEFAULT command, the value is changed to 120 or 240 based on the printer model. 0 to 999 0 Used to request the number of collated copies of a print On. OFF indicates PQET is Off. 0 to 255 90 The time the printer remains idle before the job is forced to print. Note: If a value greater - Lexmark 23B0225 | Technical Reference - Page 98
) NO Printer Unique Variables for Both Printer Languages The following variables are unique to some Lexmark printers and are supported for both Alarm Control Selections MANUAL, AUTOMATIC ON, OFF ON enables parallel bidirectional support. OFF disables parallel bidirectional support. OFF, SINGLE - Lexmark 23B0225 | Technical Reference - Page 99
3-20 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LBONDOUTBIN (DEFAULT only) Function Selections Factory Default Assign Type/Bin - Bond UPPER, LOWER, DISABLED, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, - Lexmark 23B0225 | Technical Reference - Page 100
If collation is set to OFF, uncollated output prints pages 1, 1, 2, 2, 3, 3. Indicates which color target the printer emulates NONE, DISPLAY, SWOP, OFF, AUTO, VIVID, DUOTONE, MANUAL See "Table B-2: Printer Unique PJL Variables for Both Printer Languages" on page B-4 for the default value of your - Lexmark 23B0225 | Technical Reference - Page 101
3-22 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCOLOREDLOADING (DEFAULT only) LCOLOREDOUTBIN (DEFAULT only) Function Colored Paper Loading Selections OFF, DUPLEX Factory Default OFF Assign Type/Bin Colored Paper UPPER, - Lexmark 23B0225 | Technical Reference - Page 102
3-23 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMPAPERHEIGHT LCUSTOMPAPERFEED LCUSTOMTYPE1LENGTH (DEFAULT only) LCUSTOMTYPE1LOADING (DEFAULT only) LCUSTOMTYPE1MEDIA (DEFAULT only) LCUSTOMTYPE1NAME (DEFAULT only) Function Selections Universal - Lexmark 23B0225 | Technical Reference - Page 103
3-24 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE1OUTBIN (DEFAULT only) Function Assign Type/Bin Custom Type 1 Selections UPPER, LOWER, DISABLED, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, - Lexmark 23B0225 | Technical Reference - Page 104
3-25 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE2NAME (DEFAULT only) LCUSTOMTYPE2OUTBIN (DEFAULT only) Function Selections Factory Default Custom Type 2 Name "name" name is a variable that allows for custom naming - Lexmark 23B0225 | Technical Reference - Page 105
3-26 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE3MEDIA (DEFAULT only) LCUSTOMTYPE3NAME (DEFAULT only) LCUSTOMTYPE3OUTBIN (DEFAULT only) Function Selections Factory Default Custom Type 3 PAPER, COATED, GLOSSY, TRANSPARENCY, Media LABELS - Lexmark 23B0225 | Technical Reference - Page 106
3-27 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE4LOADING (DEFAULT only) LCUSTOMTYPE4MEDIA (DEFAULT only) LCUSTOMTYPE4NAME (DEFAULT only) LCUSTOMTYPE4OUTBIN (DEFAULT only) Function Custom Type 4 Paper Loading Selections OFF, DUPLEX Factory - Lexmark 23B0225 | Technical Reference - Page 107
3-28 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE5LENGTH (DEFAULT only) LCUSTOMTYPE5LOADING (DEFAULT only) LCUSTOMTYPE5MEDIA (DEFAULT only) LCUSTOMTYPE5NAME (DEFAULT only) LCUSTOMTYPE5OUTBIN (DEFAULT only) Function Custom Type 5 Length - Lexmark 23B0225 | Technical Reference - Page 108
3-29 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE5WEIGHT (DEFAULT only) LCUSTOMTYPE6LENGTH (DEFAULT only) LCUSTOMTYPE6LOADING (DEFAULT only) LCUSTOMTYPE6MEDIA (DEFAULT only) LCUSTOMTYPE6NAME (DEFAULT only) LCUSTOMTYPE6OUTBIN (DEFAULT only) - Lexmark 23B0225 | Technical Reference - Page 109
3-30 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE6TEXTURE (DEFAULT only) LCUSTOMTYPE6WEIGHT (DEFAULT only) LDOWNLOADTARGET (SET only) LDRYTIMEDELAY LDUPLICATEHELDJOBS LENVELOPEENHANCE (DEFAULT only) LENVELOPELENGTH (DEFAULT only) - Lexmark 23B0225 | Technical Reference - Page 110
3-31 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LENVELOPETEXTURE (DEFAULT only) LENVELOPEWEIGHT (DEFAULT only) LESCCHAR (READ only) (Port specific) LFAXRESOLUTION (SET only) LFAXREDIAL (SET only) LFAXREDIALFREQUENCY (SET only) LFAXTRANSMISSIONLOG (SET - Lexmark 23B0225 | Technical Reference - Page 111
3-32 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LGLOSSYOUTPUTBIN Function Assign Type/ Bin - Glossy Selections Factory Default UPPER, LOWER, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, OPTIONALOUTBIN6, - Lexmark 23B0225 | Technical Reference - Page 112
size, default formatting size COM10, COM9, MONARCH, DL, C5, B5, OTHERENVELOPE COM10, DL (Country specific) Ink Alert ON, OFF OFF Displays a printer attendance message when an ink cartridge is low. Multipurpose feeder installed size, default formatting size Paper: A3, A3+, A4, A5, JISB4 - Lexmark 23B0225 | Technical Reference - Page 113
3-34 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LLABELSOUTBIN (DEFAULT only) Function Assign Type/Bin Labels Selections Factory Default UPPER, LOWER, DISABLED, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, - Lexmark 23B0225 | Technical Reference - Page 114
3-35 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LLETTERHEADOUTBIN (DEFAULT only) LMANUALCOLORCMYKTEXT Letterhead Texture Letterhead Weight Manual Color RGB Text Manual Color RGB Graphics Manual Color RGB Image Manual Color CMYK Text Standard Bin - Lexmark 23B0225 | Technical Reference - Page 115
36 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LMANUALCOLORCMYKIMAGE LMANUALENVELOPESIZE LMANUALENVELOPETYPE LMANUALPAPERSIZE LMANUALPAPERTYPE LMPFEEDERPAPERTYPE LMULTIPAGEBORDER LMULTIPAGEORDER Function Manual Color CMYK Image Manual Envelope, default - Lexmark 23B0225 | Technical Reference - Page 116
3-37 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LMULTIPAGEPRINT LMULTIPAGEVIEW LNPAP (READ only) (Port specific) LOPTIONALOUTBIN1NAME (DEFAULT only) LOPTIONALOUTBIN2NAME (DEFAULT only) LOPTIONALOUTBIN3NAME (DEFAULT only) LOPTIONALOUTBIN4NAME (DEFAULT - Lexmark 23B0225 | Technical Reference - Page 117
3-38 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable Function Selections Factory Default LOPTIONALOUTBIN6NAME (DEFAULT only) Optional Output Bin 6 Name "name" name is a variable that allows for custom naming of optional - Lexmark 23B0225 | Technical Reference - Page 118
, MANUALPAPER, MANUALENVELOPE (Model specific) Note: If any optional source is specified, but it is not installed, the default paper source is not changed. See "Table B-2: Printer Unique PJL Variables for Both Printer Languages" on page B-4 for the default value of your - Lexmark 23B0225 | Technical Reference - Page 119
3-40 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LPICTUREGRADE LPLAINLENGTH (DEFAULT only) LPLAINOUTBIN (DEFAULT only) to the closest value within the possible value range. Some printer models released in the year 2000 or later designated as Energy Star - Lexmark 23B0225 | Technical Reference - Page 120
settings in NVRAM are changed when PPDS is activated: • PCL and PS SmartSwitch settings for each port are turned off. • Printer Language is set to PPDS. OFF Lines Per Page 1 to 255 (PPDS) 64, 68 (Country specific) Lines Per Inch Preprinted Paper Length 0.25 to 30. - Lexmark 23B0225 | Technical Reference - Page 121
is selected, Print Buffer displays with the Waiting message. If OFF is selected, Print Buffer does not display with the Waiting message. 0 to 15 seconds 0 Printer Usage MAXSPEED, MAXYIELD Disable Print Menus from front panel ON, OFF MAXSPEED, MAXYIELD (Model specific) ON - Lexmark 23B0225 | Technical Reference - Page 122
a custom name. Print and Hold Repeat Print Job Limit 0 to 50 jobs 5 Specifies the number of Repeat Print jobs that can be held in printer memory. If the Repeat Print Job Limit setting is not equal to 0, a DINQUIRE or INQUIRE returns the numerical setting for LREPEATPRINTLIMIT. If Repeat Print - Lexmark 23B0225 | Technical Reference - Page 123
3-44 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LSTANDARDOUTBINNAME (DEFAULT only) LSTROKEWIDTH LSTAPLE LSTAPLESEMPTYALARM (DEFAULT only) LSTAPLETESTBIN (DEFAULT only) LSTAPLETESTSOURCE (DEFAULT only) LSUBSTITUTESIZE LTHINCOAT LTOPBINROTATE (DEFAULT - Lexmark 23B0225 | Technical Reference - Page 124
3-45 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LTRANSPARENCYOUTBIN (DEFAULT only) Function Assign Type/Bin Transparency Selections Factory Default UPPER, LOWER, DISABLED, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, - Lexmark 23B0225 | Technical Reference - Page 125
3-46 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LTRAY3SENSEDTYPE PAPER LTRAY3SENSEDTYPE TRANSPARENCY LTRAY4SENSEDTYPE PAPER LTRAY4SENSEDTYPE TRANSPARENCY LTRAY1AUTOSIZE (DEFAULT only) LTRAY2AUTOSIZE (DEFAULT only) LTRAY3AUTOSIZE (DEFAULT only) - Lexmark 23B0225 | Technical Reference - Page 126
specific) name is a text string that is truncated to 24 characters. See "Table B-2: Printer Unique PJL Variables for Both Printer Languages" on page B-4 for the default value for your printer. Tray 4 Paper Type PLAIN, COATED, GLOSSY, PHOTO, GREETINGCARD, IRONON, BOND, TRANSPARENCY, CARDSTOCK - Lexmark 23B0225 | Technical Reference - Page 127
parameter should be specified as LPARM:PCL. For example: @PJL SET LPARM:PCL FONTSOURCE=I To determine which variables your printer supports, see "Table B-3: Common Variables for PCL Emulation" on page B-11. Table 3-5: Common Variables for PCL Emulation Variable FONTNUMBER FONTSOURCE PITCH - Lexmark 23B0225 | Technical Reference - Page 128
your printer supports, see "Table B-4: Printer Unique Variables for PCL Emulation" on page B-12. Table 3-6: Printer NONE Variable used with PJL INQUIRE or DINQUIRE command. LASSIGNMANUALENVELOPE Tray Renumber Assign Manual Envelope OFF, 0 to 199 Variable used with PJL SET or DEFAULT command - Lexmark 23B0225 | Technical Reference - Page 129
Variable used with PJL INQUIRE or DINQUIRE command. ON, OFF ON Some printers handle partial pel character escapement rounding of bitmap fonts differently. LBITMAPROUNDING offers a way of instructing the printer how to handle partial pel rounding of bitmap fonts. Bitmap rounding is compatible - Lexmark 23B0225 | Technical Reference - Page 130
be specified as LPARM:POSTSCRIPT. For example: @PJL SET LPARM:POSTSCRIPT JAMRECOVERY=OFF[] To determine which variables your printer supports, see "Table B-5: Common Variables for PostScript Emulation" on page B-13. Table 3-7: Common Variables for PostScript Emulation Variable JAMRECOVERY - Lexmark 23B0225 | Technical Reference - Page 131
example: @PJL SET LPARM:POSTSCRIPT LPICTUREGRADE=ON[] To determine which variables your printer supports, see Table B-6 on page B-13. Table 3-8: Printer Unique Variables for PostScript Emulation Variable LPICTUREGRADE LPSFONTPRIORITY Function PictureGrade Font Priority Selections ON, OFF - Lexmark 23B0225 | Technical Reference - Page 132
executed. The DEFAULT command causes a PJL Reset. To determine which variables your printer supports, see "Table B-7: Printer Unique LRESOURCE Variables" on page B-13. Table 3-9: Printer Unique LRESOURCE Variables Variable Function Selections Factory Default LDESCRIPTION (DEFAULT only) Macro - Lexmark 23B0225 | Technical Reference - Page 133
Readback commands. In addition, the printer can also be instructed to send unsolicited status information back to the host computer when asynchronous events occur, such as a memory error or a paper jam. To determine which commands your printer supports, see "Table B-8: Status Readback Commands - Lexmark 23B0225 | Technical Reference - Page 134
variable=value The supported variables are listed in the tables beginning on page 3-12. This printer returns a ? for inquiries of an unsupported variable, or inquiries of a variable associated with an option that is not installed. ECHO Command The ECHO command instructs the printer to return the - Lexmark 23B0225 | Technical Reference - Page 135
. INFO Command The INFO command is used to query status information from the printer. "Table 3-10: INFO Category Parameter Values" on page 3-56 lists the or tabs] category Table 3-10 lists the supported categories. Table 3-10: INFO Category Parameter Values Category Values ID CONFIG - Lexmark 23B0225 | Technical Reference - Page 136
3-57 INFO CONFIG Response Syntax (An Example): @PJL INFO CONFIG IN TRAYS [2 ENUMERATED] INTRAY1 INTRAY2 MANUAL FEED OUT TRAYS [1 ENUMERATED] UPPER FACEDOWN PAPERS [13 ENUMERATED] LETTER LEGAL A4< - Lexmark 23B0225 | Technical Reference - Page 137
] parameter specifies the type of PJL variables to be queried. The variables supported are listed in the tables beginning on page 3-12. • A [command the tables "Common Variables for PCL Emulation" on page 3-48, and "Printer Unique Variables for PCL Emulation" on page 3-49.) • LPARM:POSTSCRIPT is - Lexmark 23B0225 | Technical Reference - Page 138
ustatus variable [one or more lines of printable characters, spaces, or tabs] To determine which variables your printer supports, see "Table B-9: USTATUS Unsolicited Status Variables" on page B-14. See "Status Message Format" on page 3-61 for additional information about the - Lexmark 23B0225 | Technical Reference - Page 139
PJL ustatus variable=value The following values are supported for the ustatus variable=value parameter. Table unsolicited status for job changes. ON Enables unsolicited status for page changes. The printer sends a status message when a printed sheet reaches the standard output bin. OFF - Lexmark 23B0225 | Technical Reference - Page 140
Ink Low 10006 88 Ink Low TRUE Not Ready 10002 Not Ready FALSE In the Menus 10002 Not Ready FALSE Printer reset 10005 Resetting the Printer Print Cartridge Low TRUE Ready with Toner Low 10006 88 Black Print Cartridge Low TRUE Ready with Toner Low 10006 88 Photo Print Cartridge Low - Lexmark 23B0225 | Technical Reference - Page 141
3-62 PJL Table 3-12: PJL Information Messages Printer State Status Code Display String Online Status Ready with Replace Transfer 10006 Replace Transfer TRUE Power Saver with Ink Low 10006 88 Ink Low TRUE Power Saver mode with Toner Low 10006 88 Toner Low TRUE Power Saver mode with - Lexmark 23B0225 | Technical Reference - Page 142
are returned in this form: CODE=status code DISPLAY=display string (in double quotes) ONLINE=online status To determine which messages your printer supports, see "Table B-10: PJL Messages for Auto-Continuable Conditions" on page B-15. Table 3-13: PJL Messages for Auto-Continuable Conditions - Lexmark 23B0225 | Technical Reference - Page 143
: PJL Messages for Auto-Continuable Conditions (Continued) Printer State Status Code Display String Online Status Intervention required Disk? or Print Jobs on Disk. Go/Stop? FALSE Intervention required: 30031 printer powered off, disk installed with Print and Hold jobs on the disk Restore - Lexmark 23B0225 | Technical Reference - Page 144
13: PJL Messages for Auto-Continuable Conditions (Continued) Printer State Status Code Display String Online Status Intervention required: Insert Box M FALSE Intervention required: staple cartridge missing 30107 Insert Staple Cartridge FALSE Intervention required: insert stapler 30107 - Lexmark 23B0225 | Technical Reference - Page 145
3-66 PJL Table 3-13: PJL Messages for Auto-Continuable Conditions (Continued) Printer State Status Code Display String Online Status Intervention required: disk full 32002 62 Disk Full FALSE Intervention required: disk corrupted 32015 Disk Corrupted. Reformat? FALSE - Lexmark 23B0225 | Technical Reference - Page 146
ONLINE=online status To determine which messages your printer supports, see "Table B-11: PJL Messages for ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer - Lexmark 23B0225 | Technical Reference - Page 147
message, the values for XXXX are returned to indicate which ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer. Note: The Display String is returned in the current - Lexmark 23B0225 | Technical Reference - Page 148
message, the values for XXXX are returned to indicate which ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer. Note: The Display String is returned in the current - Lexmark 23B0225 | Technical Reference - Page 149
message, the values for XXXX are returned to indicate which ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer. Note: The Display String is returned in the current - Lexmark 23B0225 | Technical Reference - Page 150
message, the values for XXXX are returned to indicate which ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer. Note: The Display String is returned in the current - Lexmark 23B0225 | Technical Reference - Page 151
ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer a Load , Load Manual, or Change message appears on the printer operator panel display or through - Lexmark 23B0225 | Technical Reference - Page 152
3-73 PJL To determine which messages your printer supports, see "Table B-12: PJL Messages for Paper Handling" on page B-25. Table 3-15: PJL Messages for Paper Handling Printer State Status Code Display String* Online Status Intervention required: wrong paper size in tray x 30034 34 Wrong - Lexmark 23B0225 | Technical Reference - Page 153
3-74 PJL Table 3-16: Tray Codes X Value 0 1 2 3 4 5 6 7 Tray Multipurpose Feeder Manual Feed Tray 1 Tray 2 Envelope Feeder Tray 3 Tray 4 Tray 5 Table 3-17: Media Size Codes YY Value 00 01 02 03 04 05 06 07 08 09 - Lexmark 23B0225 | Technical Reference - Page 154
Bin 1 Bin 2 Bin 3 Bin 4 Bin 5 Bin 6 Bin 7 Bin 8 Bin 9 Bin 10 Operator Intervention - Paper Jams When a Paper Jam message appears on the printer operator panel display or through MarkVision Professional, a message is returned to the host computer indicating the type and location for the prompt - Lexmark 23B0225 | Technical Reference - Page 155
3-76 PJL To determine which messages your printer supports, see Table B-13 on page B-26. Table 3-19: PJL Messages for Paper Jams Printer State Status Code Display String* Online Status Intervention required: paper jam 4200x 200 Paper Jam FALSE Intervention required: paper jam 4201x 201 - Lexmark 23B0225 | Technical Reference - Page 156
3-77 PJL Table 3-19: PJL Messages for Paper Jams (Continued) Printer State Status Code Display String* Online Status Intervention required: paper jam 4232x 232 Paper Jam FALSE Intervention required: paper jam 4233x 233 Paper Jam FALSE - Lexmark 23B0225 | Technical Reference - Page 157
3-78 PJL Table 3-19: PJL Messages for Paper Jams (Continued) Printer State Status Code Display String* Online Status Intervention required: paper jam 4253w 253 Paper Jam FALSE Intervention required: paper jam 4254wy 254 Paper Jam FALSE - Lexmark 23B0225 | Technical Reference - Page 158
3-79 PJL Table 3-19: PJL Messages for Paper Jams (Continued) Printer State Status Code Display String* Online Status Intervention required: paper jam 4281w 281 Paper Jam FALSE Intervention required: paper jam 4281x 281 Paper Jam FALSE - Lexmark 23B0225 | Technical Reference - Page 159
documentation for more information on printer messages. Service Errors Error Code 50000 is returned for all 9xx Service Errors when the printer can return a status code. To determine whether your printer supports returning service messages, see "Table B-14: Service Errors" on page B-31. Device - Lexmark 23B0225 | Technical Reference - Page 160
DISPLAY = "message"[] OPMSG Command When an OPMSG command is received, the message appears and is allotted both lines of the display. The printer is taken OFFLINE. This message, along with the STMSG command, is the lowest priority, so if another intervention occurs, it displays instead. Note - Lexmark 23B0225 | Technical Reference - Page 161
PJL Commands To determine which commands your printer supports, see "Table B-16: Lexmark Unique PJL Commands" on page B-32. LBEEP Command This command causes the printer to beep three times. Syntax: @PJL LBEEP[] LPORTROTATE Command This command causes the printer to rotate ports at the next - Lexmark 23B0225 | Technical Reference - Page 162
one of the internal information pages. @PJL testpage[] The supported testpage values are listed in the following table. Table 3-20: escape character. For example, at the factory, the printer uses 0x1B (character ) for the escape character. If CHAR = 65 is specified with this command - Lexmark 23B0225 | Technical Reference - Page 163
3-84 PJL PORT parameter The following ports are valid parameters for LESCAPECHAR: • INA • INA1 • INA2 • INA3 • LOCALTALK1 • LOCALTALK2 • LOCALTALK3 • PARALLEL • PARALLEL1 • PARALLEL2 • PARALLEL 3 • USB • USB1 • USB2 • USB3 • SERIAL • SERIAL1 • SERIAL2 • SERIAL3 • IR • IR1 • IR2 • IR3 - Lexmark 23B0225 | Technical Reference - Page 164
the fax processing device if one of the following occurs: • The printer is not configured for fax send capability • The command is received with a command that selects an interpreter that does not support formatting functionality for sending faxes Syntax: @PJL LFAX PHONENUMBER="number" [STATIONID - Lexmark 23B0225 | Technical Reference - Page 165
3-86 PJL LDOWNLOADTARGET Command This command specifies which device is the target for downloaded files. The target can be RAM, flash, or disk. Syntax: @PJL SET LDOWNLOADTARGET=variable [] File Commands for Flash or Disk Use the following commands to manage resources on flash and disk - Lexmark 23B0225 | Technical Reference - Page 166
3-87 PJL Table 3-22 lists the parameters used with most of the commands. Additional parameters are noted in the description of each command. Table 3-22: Variables for Flash and Disk File and Password Commands Parameter accesstype bytecount Syntax ACCESS = accesstype LENGTH = bytecount - Lexmark 23B0225 | Technical Reference - Page 167
3-88 PJL Table 3-22: Variables for Flash and Disk File and Password Commands (Continued) Parameter filedevice Syntax DEVICE = filedevice Description File storage media. Case insensitive. flash flash1 disk disk1 rom The rom value is used for the LRUNFILE command only. Note: The command is - Lexmark 23B0225 | Technical Reference - Page 168
3-89 PJL Table 3-22: Variables for Flash and Disk File and Password Commands (Continued) Parameter location Syntax START = location Description The location in the file to begin writing or reading. Use an integer that represents an offset in bytes from the beginning of the file. Optional for - Lexmark 23B0225 | Technical Reference - Page 169
3-90 PJL LREADFILE Command Use this command to read data from a file on a storage device. Syntax: @PJL LREADFILE DEVICE = filedevice FILENAME = "fname" [START = location] [LENGTH = bytecount][] Response Syntax: @PJL LREADFILE DEVICE = filedevice FILENAME = "fname" START = location LENGTH = - Lexmark 23B0225 | Technical Reference - Page 170
3-91 PJL LWRITEFILE Command Use this command to write data to a file on a storage device. Syntax: @PJL LWRITEFILE DEVICE = filedevice FILENAME = "fname" [START = location] [LENGTH = bytecount][] [@PJL END DATA][] Notes: • The file must be closed using the LCLOSEFILE command - Lexmark 23B0225 | Technical Reference - Page 171
3-92 PJL LRENAMEFILE Command Use this command to rename a file on a storage device. The command is ignored if the filename specified as OLDFILENAME doesn't exist on the device, or if the filename specified as NEWFILENAME already exists on the device. Syntax: @PJL LRENAMEFILE DEVICE = filedevice - Lexmark 23B0225 | Technical Reference - Page 172
3-93 PJL File and Device Protection Commands The following information applies to password protection. • You can set both read/write and write passwords for a resource. If both passwords are set, the read/write password has precedence over the write password. • If you attempt to password-protect a - Lexmark 23B0225 | Technical Reference - Page 173
saved to flash with an ID of 1023: @PJL DEFAULT LRESOURCE:"flash:1023.p5macro" LRWLOCK="password"[] Note: If the filename is incorrect, the printer applies the password to the entire device. Password for an Entire Device If you want to set a password on a device, not just a single file, omit - Lexmark 23B0225 | Technical Reference - Page 174
PCL symbol sets. See the table beginning on page 3-87 for a complete list of the supported file types. The filetype is case sensitive. LRWLOCK = "password" or LWLOCK = "password" See "Printer Unique LRESOURCE Variables" on page 3-52 for information about values for LRWLOCK = "password" and LWLOCK - Lexmark 23B0225 | Technical Reference - Page 175
file, such as p5macro for PCL macros or p5symset for PCL symbol sets. See the table beginning on page 3-87 for a complete list of the supported filetypes. The filetype is case sensitive. - Lexmark 23B0225 | Technical Reference - Page 176
symbol sets. See the table beginning on page 3-87 for a complete list of the supported file types. The filetype is case sensitive. LRWLOCK = "password" or LWLOCK = "password" Parameters See "Printer Unique LRESOURCE Variables" on page 3-52 for information about values for LRWLOCK = "password" and - Lexmark 23B0225 | Technical Reference - Page 177
Settings Page. The value of the "seed" determines the key. 2 Obtain the key from the Lexmark Customer Support Center. You must have the "seed" value. 3 Send the @PJL LBYPASSPASSWORD command to the printer by any port. If the correct key is specified, a modified version of the directory is produced - Lexmark 23B0225 | Technical Reference - Page 178
in detail. For more information, refer to the PostScript Language Reference Manual (Third Edition) by Adobe Systems, Inc. To determine which commands your printer supports, see Appendix C: "PostScript Support" on page C-1. Selecting PostScript Emulation Using SmartSwitch When SmartSwitch is enabled - Lexmark 23B0225 | Technical Reference - Page 179
resources are stored in flash memory or on disk. Table 4-1: Paper Sizes Supported Supported ✘ Not Supported Paper Sizes Printer Models C760 C762 Literal Name Size (mm) Size (inches) Size ( different paper sizes. 2 The Lexmark C510(n) supports this size media only with an optional legal tray. - Lexmark 23B0225 | Technical Reference - Page 180
an envelope 2 treat the page size as paper Error: stackoverflow setignoresize integer setignoresize - overrides the automatic page orientation selected by the printer to support custom media sizes. This operator determines whether or not to adjust the text based on the page size. integer value may - Lexmark 23B0225 | Technical Reference - Page 181
Error: rangecheck, stackunderflow, typecheck Paper Tray Support When the printer receives one of the operators listed in " printer sends a message to load the requested size in the manual feed tray or multipurpose feeder. • The PageSize Policy is set to 0 by means of setpagedevice. • The printer - Lexmark 23B0225 | Technical Reference - Page 182
5 • If the requested size cannot be located in any automatic source, a configurationerror is issued and the job is flushed. For printers that support automatic duplexing: • Automatic duplexing is not supported for custom-size paper or for envelopes in the multipurpose feeder. Automatic duplexing is - Lexmark 23B0225 | Technical Reference - Page 183
4-6 PostScript C760 C762 Table 4-2: Tray Selected with Tray Operators Supported ✘ Not Supported Operator Tray Selected (Corresponding image size is set) a3tray tray with A3 size paper statementtray tray with statement size paper 11x17tray tray with 11 x 17 size paper Printer Models - Lexmark 23B0225 | Technical Reference - Page 184
. If the value of the manualfeed operator or the ManualFeed page device parameter is true when showpage or copypage is executed, the page is fed manually. If both have a value of false when showpage or copypage is executed, the page is fed from an automatic source. These two values are independent - Lexmark 23B0225 | Technical Reference - Page 185
: • If the Manual Paper or Manual Envelope source is selected, the ManualFeed page device parameter is set to true. • A rangecheck error is returned if a paper source that is not installed is selected. • If a setpapertray operator is issued for the back of a duplexed page, the printer ejects a blank - Lexmark 23B0225 | Technical Reference - Page 186
uses a 3.875 x 7.5 envelope. >>setpagedevice C760 C762 Table 4-3: Envelope Sizes Supported Supported ✘ Not Supported Envelope Sizes Printer Models Literal Name Size (mm) Size Size (inches) (points) 3.875x7.5envelope 98.4 x 190.5 3.875 - Lexmark 23B0225 | Technical Reference - Page 187
4-10 PostScript The literal names in Table 4-4 are supported as PostScript emulation compatible operators. Table 4-4: Literal Names Supported Supported ✘ Not Supported Literal Names Printer Models C760 C762 Literal Name Compatible Literal Name monarcenvelope 3.875x7.5envelope - Lexmark 23B0225 | Technical Reference - Page 188
print job is flushed. If manualfeed or ManualFeed is true, the printer prompts you to load the requested size manually. If no manual feed exists on the printer, a rangecheck error message is generated. The envelope tray the printer selects when it receives an envelopetray operator is listed in Table - Lexmark 23B0225 | Technical Reference - Page 189
4-12 PostScript C760 C762 Table 4-5: Envelopetray Operator Selections Supported ✘ Not Supported Tray Operators Printer Models Operator Tray Selected (Corresponding image size is set) 110x220envelopetray tray with 110 x 220 size envelopes dlenvelopetray tray with 110 x 220 size - Lexmark 23B0225 | Technical Reference - Page 190
4-13 PostScript Supplemental Operator Summary To determine which operators your printer supports, see Table C-1 on page C-1. appletalktype - appletalktype (string) in statusdict, this string reflects the current value of the LocalTalkType device parameter from the %LocalTalk% device. The - Lexmark 23B0225 | Technical Reference - Page 191
the SystemParamsPassword system parameter and the StartJobPassword system parameter stored in the printer. If the integer form is used, the integer is converted into the manual duplex mode. An integer is returned on the stack: 0 current job manual duplex mode is no manual duplex 1 current job manual - Lexmark 23B0225 | Technical Reference - Page 192
...65535 seconds • ManualFeedTimeout page device parameter 0 disabled 1...65535 seconds (default is device dependent) To find the default for your printer, see Table C-2 on page C-4. • WaitTimeout system parameter 0 disabled 15...65535 seconds (default is 40 seconds) Error: stackoverflow deletefile - Lexmark 23B0225 | Technical Reference - Page 193
4-16 PostScript devcontrol string integer devcontrol boolean allows a host computer utility to manage resources on the flash or disk. It requires a string device name parameter, an integer command name parameter, and two command argument parameters. The device control operator performs a specified - Lexmark 23B0225 | Technical Reference - Page 194
4-17 PostScript Table 4-7: Unsuccessful devcontrol Parameter Error Codes Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Meaning File system access has not been initialized Could not allocate file descriptor Some invalid argument was passed No such device Invalid access to file - Lexmark 23B0225 | Technical Reference - Page 195
4-18 PostScript devforall proc scratchstring devforall - executes the specified proc procedure for each storage device after pushing a substring on the stack that is the portion of the scratch string containing the device name. This operator is in systemdict. Errors: invalidaccess, rangecheck, - Lexmark 23B0225 | Technical Reference - Page 196
the device can be written to. This value is the same as the Writeable device parameter from the specified IODevice. hasnames true, if the device supports named files. This value is the same as the HasNames device parameter from the specified IODevice. - Lexmark 23B0225 | Technical Reference - Page 197
4-20 PostScript mounted true, if the device is mounted. This value is the same as the Mounted device parameter from the specified IODevice. removable true, if the device is removable and must be mounted before it is referenced. This value is the same as the Removable device parameter from the - Lexmark 23B0225 | Technical Reference - Page 198
4-21 PostScript diskstatus - diskstatus free logicalsize returns on the stack the following two integers: • Number of pages that are free on the optional disk. The value of the Free device parameter from the %disk1% IODevice. • Total number of pages (1024 bytes) that are on the optional disk. The - Lexmark 23B0225 | Technical Reference - Page 199
setting for the current print job. An integer value is returned on the stack: 0 Off 1 On Note: For printers that do not support PQET, doret returns a 0. This operator is equivalent to executing the following PostScript emulation sequence: currentpagedevice /PostRenderingEnhanceDetails get /REValue - Lexmark 23B0225 | Technical Reference - Page 200
if a duplex unit is installed. A boolean value is returned on the stack: true duplex unit is installed false duplex unit is not installed Note: For printers that do not support duplexing, this value is always false. Error: stackoverflow - Lexmark 23B0225 | Technical Reference - Page 201
value for the Duplex page device parameter. true printing mode is duplex false printing mode is simplex Note: For printers that do not support duplexing, this value is always false. This operator is equivalent to executing the following PostScript emulation sequence: currentpagedevice /Duplex - Lexmark 23B0225 | Technical Reference - Page 202
4-25 PostScript file filename access file file creates a file object with specified filename and access. The access values are: r open the file for reading only w create a file if one does not already exist, or truncate and overwrite it if it does exist. File is opened for writing only. a create a - Lexmark 23B0225 | Technical Reference - Page 203
integer value is returned on the stack: 1 Parallel Fastbytes Off (Standard) 2 Parallel Fastbytes On (Fastbytes) Error: stackoverflow idlefonts - idlefonts mark supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. It is parsed and returns a mark on the stack. Error: stackoverflow - Lexmark 23B0225 | Technical Reference - Page 204
4-27 PostScript ignoresize See page 4-3. initializedisk pages action initializedisk - initializes the disk with the page count and action as integer arguments. The arguments set the (%disk1%) IO device parameters as follows: • LogicalSize parameter is set to pages. • If a value of 0 is set as - Lexmark 23B0225 | Technical Reference - Page 205
4-28 PostScript jobsource - jobsource (string) indicates the current value of the CurInputDevice system parameter. A string is returned on the stack indicating the job source. Valid values are: %LocalTalk% %SerialA% %SerialB% %SerialC% %SerialD% %ParallelA% %ParallelB% %ParallelC% %ParallelD% % - Lexmark 23B0225 | Technical Reference - Page 206
4-29 PostScript %LPR_B% %LPR_C% %LPR_D% %UnknownDevice% This operator is equivalent to executing the following PostScript emulation sequence: currentsystemparams /CurInputDevice get Error: stackoverflow jobtimeout - jobtimeout integer queries the current user default setting for the JobTimeout - Lexmark 23B0225 | Technical Reference - Page 207
4-30 PostScript manualfeedtimeout /manualfeedtimeout integer def is an integer key in statusdict that works with the ManualFeedTimeout page device parameter to determine the manualfeed timeout for a given page. If during a print job, manualfeedtimeout is defined as an integer value in statusdict, - Lexmark 23B0225 | Technical Reference - Page 208
of the current job submitted by the PostScript interpreter to the printer. Error: stackoverflow papertray See page 4-7. printername (string) printername defined by the setprintername operator. The value of the string defines the printer name. A maximum of 32 characters are returned on the stack. - Lexmark 23B0225 | Technical Reference - Page 209
or 1 to 240 (Model specific) Number of minutes elapsed after last page prints before Power Saver is invoked. Power Saver reduces power consumption when the printer is idle. When quiet is enabled, it takes longer to print the first page after the - Lexmark 23B0225 | Technical Reference - Page 210
returns a boolean with the same value as the RealFormat system parameter. It indicates the printer microprocessor native real number representation. A query determines if the printer real number representation matches the application real number representation and compensates if necessary. Error - Lexmark 23B0225 | Technical Reference - Page 211
4-34 PostScript resolution - resolution integer queries the resolution for the current print job. An integer is returned on the stack: 300 300 dpi is set to On 600 600 dpi is set to On 1200 1200 dpi is set to On This operator is equivalent to executing the following PostScript emulation sequence: - Lexmark 23B0225 | Technical Reference - Page 212
default settings for serial communication parameters. channel has the following valid integer values: 9 25 If only one serial interface port is available on the printer, both 9 and 25 return the same values. Baud and option values are returned on the stack. baud returns the value of the Baud menu - Lexmark 23B0225 | Technical Reference - Page 213
4-36 PostScript sccinteractive channel sccinteractive baud options provided for parsing compatibility purposes. A value of 0 is returned. Errors: invalidaccess, rangecheck, stackoverflow, stackunderflow, typecheck setcoverpage boolean setcoverpage - specifies a cover page for a fax job. The - Lexmark 23B0225 | Technical Reference - Page 214
setdoprinterrors sets the system parameter DoPrintErrors to the value of boolean. It also indicates the current value of the Print PS Error printer setting. The DoPrintErrors system parameter must be present for the setdoprinterrors operator to be present. The boolean values indicate: true Print PS - Lexmark 23B0225 | Technical Reference - Page 215
4-38 PostScript setdoret integer setdoret - changes the PQET setting for the next page through the end of the print job. The integer values allowed are: 0 turn PQET Off 1 turn PQET On 2 turn PQET On 3 turn PQET On 4 turn PQET On The value you select for PQET returns to the user default setting - Lexmark 23B0225 | Technical Reference - Page 216
search order for the devices determines which one is executed. • If false, the printer does not execute a Sys/Start file. Errors: invalidaccess, stackunderflow, typecheck setduplexmode boolean side of the next sheet. • For printers that do not support duplexing, this value is always set to false. - Lexmark 23B0225 | Technical Reference - Page 217
page of a job to print before returning a Ctrl-D to the host computer. The boolean values indicate: true printer waits for the last page of the job to print false printer does not wait for the last page of the job to print Errors: invalidaccess, stackunderflow, typecheck setethernetaddress string - Lexmark 23B0225 | Technical Reference - Page 218
does not exist. sethardwareiomode integer sethardwareiomode - is parsed and discarded. In addition, one integer is removed from the stack. It supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. Errors: invalidaccess, stackunderflow, typecheck setidlefonts mark... setildefonts - Lexmark 23B0225 | Technical Reference - Page 219
second sides being printed. While printing the second sides the printer's available paper sources are restricted to the automatic tray (tray1) and the manual paper feeder for the remainder of the job or until the manual duplex mode value is changed. Error: stackunderflow, typecheck setpapertray See - Lexmark 23B0225 | Technical Reference - Page 220
changes made by this operator are not active until the end of the print job. Note: Some printer models released in the year 2000 or later designated as Energy Star printers cannot have Power Saver disabled. This operator is equivalent to executing the following PostScript emulation sequence: %Go - Lexmark 23B0225 | Technical Reference - Page 221
4-44 PostScript setresolution integer setresolution - changes the resolution for the current print job and discards unprinted data. See your printer documentation for a list of supported resolutions. The following integers are valid: 300 600 1200 300 dpi is set to On 600 dpi is set to On 1200 - Lexmark 23B0225 | Technical Reference - Page 222
is parsed, and three integers are removed from the stack and discarded. Errors: invalidaccess, rangecheck, stackunderflow, typecheck setsoftwareiomode integer setsoftwareiomode - supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. It is parsed, and an integer is removed from the - Lexmark 23B0225 | Technical Reference - Page 223
integer setuserdiskpercent - removes an integer from the stack and discards it. Errors: stackunderflow, rangecheck, invalidaccess, typecheck softwareiomode - softwareiomode 0 supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. It is parsed and returns a 0 (zero, Binary Mode Off - Lexmark 23B0225 | Technical Reference - Page 224
4-47 PostScript userdiskpercent - userdiskpercent 0 returns a 0 (zero) on the stack. Errors: stackoverflow, invalidaccess waittimeout - waittimeout integer queries the current value for the WaitTimeout user parameter. An integer is returned on the stack: 0 disabled 15...65355 seconds This operator - Lexmark 23B0225 | Technical Reference - Page 225
about the parameters is given in Table 4-8 than in the PostScript Language Reference Manual (Third Edition) by Adobe Systems, Inc. To determine which parameters and default values your printer supports, see Table C-2 on page C-4. Table 4-8: Page Device Parameters Key BeginPage Collate Type - Lexmark 23B0225 | Technical Reference - Page 226
except the Optra C710, Optra M410, Optra T family, and Optra W810. PictureGrade is an integer that provides compatibility with previous Lexmark laser printer drivers. PictureGrade works in conjunction with Screening. If Screening is set to None or PictureGrade, the values for PictureGrade affect - Lexmark 23B0225 | Technical Reference - Page 227
the user. The values are confined to values known by the printer operating system. MediaType entries in the InputAttributes dictionaries can be modified print material must be of the same paper type. The following values are supported: /Off No size substitution is performed. /A4-Letter If A4 is - Lexmark 23B0225 | Technical Reference - Page 228
is a constant value. To find the value of Type for your printer, see Table C-2 on page C-4. ColorCorrection is a null, string, is an integer that controls the print quality settings. The following values are supported: 0 Quick Print 1 Normal 2 Presentation 3 1200 Image Q Indicates if - Lexmark 23B0225 | Technical Reference - Page 229
4-52 PostScript Table 4-8: Page Device Parameters (Continued) Key ImagingBBox InputAttributes Type array or null dictionary Definition Defines a rectangle that lies within the boundaries of the page specified by PageSize. ImagingBBox may be either a value of null or an array of four numbers. - Lexmark 23B0225 | Technical Reference - Page 230
Jog procedure integer Note: Values 3 and 4 for the Hewlett Packard Company's LaserJet printers are switched relative to the /Optra values 3 and 4. Priority is an array which Offset Pages setting is used. The following values are supported: 0 Offset Pages is disabled. 1 Offset Pages is - Lexmark 23B0225 | Technical Reference - Page 231
if the current (or active) source is a manual source. The following values are supported: True Manual feed False Automatic feed If ManualFeed is set to parameters are active. False Nup is Off. For some printers, the value of Nup is set through the Multipage Printing menu item. For more - Lexmark 23B0225 | Technical Reference - Page 232
the orientation of the individual Nup pages on the printed page. Supported values are: 0 Portrait 1 Landscape Orientation determines the positioning of of page images depends on whether they are sent to the printer as portrait or landscape images. The following examples show the result - Lexmark 23B0225 | Technical Reference - Page 233
then across. Type is a constant value. To find the value of Type for your printer, see Table C-2 on page C-4. LandscapeOverride is a boolean which specifies the orientation of Nup pages. Supported values are: False Orientation is specified by the PageSize parameter. True Orientation is assumed to - Lexmark 23B0225 | Technical Reference - Page 234
is issued, if no match is found for the OutputType string, the paper exits into the standard output bin. Specifies if pages are actually printed. Supported values are: True Job is processed as usual (default). False No page is printed, but all other job processing occurs. Specifies the output bin - Lexmark 23B0225 | Technical Reference - Page 235
. Implement the requested PageSize on the previously selected media without making adjustments. The way the image is positioned on the media is printer-dependent and may result in part of the image being clipped. 23 If the SubstituteSize parameter from the DeviceRenderingInfo dictionary is set - Lexmark 23B0225 | Technical Reference - Page 236
parameter can only be modified within a system administration job. Specifies the color model to use for rendering process colors in the printer. Supported values are: DeviceGray DeviceRGB DeviceCMYK DeviceCMY Requests holes to be punched in the output page. The format for setting the Punch key - Lexmark 23B0225 | Technical Reference - Page 237
Type 96 /SlipSheetSource n>> >> setpagedevice Type is a constant value. To find the value of Type for your printer, see Table C-2 on page C-4. Specifies whether to staple the current print job. Supported values are: 0 Do not staple the print job. 1 Staple each set in the front position. 2 Staple - Lexmark 23B0225 | Technical Reference - Page 238
that defines the x and y values (in points) for Universal. Orientation is an integer that defines how the Universal paper will be fed through the printer. Supported values are: 0 Paper is fed short edge first. 1 Paper is fed long edge first. Prompt defines a string to be displayed on the operator - Lexmark 23B0225 | Technical Reference - Page 239
) value is used. If a setuserparams value does not match the type of the specified parameter, a typecheck error occurs. If a parameter is not supported by the printer, it is ignored. An attempt to change the value of a read-only parameter has no effect on the parameter. To determine which parameters - Lexmark 23B0225 | Technical Reference - Page 240
at the time the halftone operator is executed. 2 Not supported. HalftoneMode is set to 1. Legal values: True False an upper limit dependent on the MaxFontCache system parameter and the amount of printer memory. Legal values: Any non-negative integer. Maximum number of bytes occupied - Lexmark 23B0225 | Technical Reference - Page 241
at the beginning of a job and at the end of a job, and then calculating the difference to determine how many pages are submitted to the printer for a specific job. This parameter is not valid for tracking pages between jobs. Legal values: True False Indicates the copypage command is processed as - Lexmark 23B0225 | Technical Reference - Page 242
of the specified parameter cause typecheck errors. Parameters that are not supported by the printer are ignored. An attempt to change the value of a read- currently occupied by the form cache. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement - Lexmark 23B0225 | Technical Reference - Page 243
generated print jobs by substituting PostScript procedures in the job's ProcSet with fast functions that are built into the printer firmware. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016. 2 These parameters are available with the Adobe - Lexmark 23B0225 | Technical Reference - Page 244
of the current job. FactoryDefaults boolean If set to True and the printer is then immediately powered off, all non-volatile parameters revert to factory default would be in Resource/Pattern/LexmarkLogo. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language - Lexmark 23B0225 | Technical Reference - Page 245
(Read-only) See Table C-4 on page C-9 for the default value of your printer. MaxScreenStorage integer (Read-only) See Table C-4 on page C-9 for the default value of your printer. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016. 2 These - Lexmark 23B0225 | Technical Reference - Page 246
uses to locate fonts. (Read-only) Serial number of your printer. StartJobPassword string (Write-only) Controls the ability of the startjob memory (in bytes) on the controller board. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016 - Lexmark 23B0225 | Technical Reference - Page 247
indicates an infinite timeout. If you select a number between 1 and 14, 15 is set. Legal values: x = 0, 15 - Lexmark 23B0225 | Technical Reference - Page 248
channels are: - %SerialA% - %SerialB% - %SerialC% - %SerialD% For some printers, no "A" channel exists. If %Serial% is specified, it refers to the channel where the on page 6-1. To determine which devices your printer supports, see Table C-5 on page C-12. To determine which device parameters your - Lexmark 23B0225 | Technical Reference - Page 249
%ParallelB%, %ParallelC%, %ParallelD% (%Parallel_NV% and %Parallel_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and - Lexmark 23B0225 | Technical Reference - Page 250
to None or Ignore. DataBits integer Returns the value of the Data Bits menu item. DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and all preceding jobs - Lexmark 23B0225 | Technical Reference - Page 251
is set to Off. For more information, see "Using SmartSwitch" on page 4-1. boolean Supported values are: True RobustXon is set to On. False RobustXon is set to Off. RS-232/RS-422 menu item. Supported values are: RS232 RS422 Returns RS232 on a printer that is attached with a cable that does not - Lexmark 23B0225 | Technical Reference - Page 252
LocalTalkB%, %LocalTalkC%, %LocalTalkD% (%LocalTalk_NV% and %LocalTalk_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job - Lexmark 23B0225 | Technical Reference - Page 253
EtherTalkB%, %EtherTalkC%, %EtherTalkD% (%EtherTalk_NV% and %EtherTalk_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job - Lexmark 23B0225 | Technical Reference - Page 254
Device %IR%, %IR_A%, %IR_B%, %IR_C%, %IR_D% (%IR_NV% and %IR_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and all - Lexmark 23B0225 | Technical Reference - Page 255
%USB%, %USB_A%, %USB_B%, %USB_C%, %USB_D% (%USB_NV% and %USB_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and all - Lexmark 23B0225 | Technical Reference - Page 256
On boolean Designates if the communication channel is On and able to receive and send data. Supported values are: True Data is sent and processed. False Data is lost. PCLSmartSwitch boolean Supported values are: True PCL SmartSwitch is On. False PCL SmartSwitch is Off. For more information - Lexmark 23B0225 | Technical Reference - Page 257
DelayedOutputClose Enabled Filtering HasNames Interpreter NodeID On PCLSmartSwitch PortLocation PSSmartSwitch Type Definition boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job - Lexmark 23B0225 | Technical Reference - Page 258
AppSocketB%, %AppSocketC%, %AppSocketD% (%AppSocket_NV% and %AppSocket_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job - Lexmark 23B0225 | Technical Reference - Page 259
%RemotePrinterC%, %RemotePrinterD% (%RemotePrinter_NV% and %RemotePrinter_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current - Lexmark 23B0225 | Technical Reference - Page 260
%PrintServerC%, %PrintServerD% (%PrintServer_NV% and %PrintServer_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and - Lexmark 23B0225 | Technical Reference - Page 261
%LexLinkB%, %LexLinkC%, %LexLinkD% (%LexLink_NV% and %LexLink_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and all - Lexmark 23B0225 | Technical Reference - Page 262
are: True False NetworkMask string (Read-only) On boolean Designates if the communication channel is On and able to receive and send data. Supported values are: True Data is sent and processed. False Data is lost. Physical string (Read-only) PortLocation string (Read-only) Designates the - Lexmark 23B0225 | Technical Reference - Page 263
%EthernetPhysicalD% EthernetAddress string (Read-only) On boolean Designates if the communication channel is On and able to receive and send data. Supported values are: True Data is sent and processed. False Data is lost. PortLocation string (Read-only) Designates the physical location of - Lexmark 23B0225 | Technical Reference - Page 264
4-87 PostScript Table 4-11: PostScript Emulation Device Parameters (Continued) Key Darkness Type real Definition Print Darkness and Toner Saver Setting Designates the print darkness and toner saver setting (model specific). Legal value: Any non-negative real number from 0.0 to 1.0, inclusive - Lexmark 23B0225 | Technical Reference - Page 265
integer (Read-only) Page Count TimeToStandby integer Power Saver. Supported values are: 0 to 120, in minutes Type name ( disk is not mounted or is full. HasNames boolean (Read-only) Indicates if the disk supports named files. Valid only if the disk is mounted (mounted is set to True). If - Lexmark 23B0225 | Technical Reference - Page 266
the disk is mounted. A value of 0 (zero) indicates that the device is not mounted. Removable boolean (Read-only) Indicates if the drive supports removable disks. Always returns False. Searchable boolean (Read-only) Indicates if the disk participates in searches in the file system operations that - Lexmark 23B0225 | Technical Reference - Page 267
for a flash that is mounted. A value of 0 indicates that the device is not mounted. boolean (Read-only) Indicates if the drive supports removable flash. boolean (Read-only) Indicates if the flash participates in searches in file system operations that specify a filename without specifying a device - Lexmark 23B0225 | Technical Reference - Page 268
set to True). A value of 0 (zero) indicates that either the ROM is not mounted or it is full. HasNames boolean (Read-only) Indicates if ROM supports named files. Valid only if ROM is mounted (mounted is set to True). If ROM is not mounted, this parameter has a value of False. InitializeAction - Lexmark 23B0225 | Technical Reference - Page 269
-T (x'14') command as a status query when data is received through the LocalTalk interface. Tagged Binary Active When Tagged Binary is active, your printer always responds to a Ctrl-T (x'14') command as a status query and selects the PostScript emulation interpreter to process the current print job - Lexmark 23B0225 | Technical Reference - Page 270
status: busy; source: Parallel ]%% The following table lists the possible keys and value descriptions. To determine which status message keys your printer supports, see Table C-7 on page C-23. Table 4-12: Status Message Keys and Value Descriptions Key job status source Value Description The name - Lexmark 23B0225 | Technical Reference - Page 271
5-1 Languages CHAPTER 5: Switching Languages Your printer may support both PCL emulation and PostScript emulation. See your printer documentation for more information. This chapter describes ways to switch printer languages and explains when you may want to choose one method over another. - Lexmark 23B0225 | Technical Reference - Page 272
to send a job to that interface using that language, you must begin the job with a PJL command to override the settings you made from the printer operator panel or through MarkVision Professional. For example, if you set PCL emulation to Off for the serial interface and later decide to send a job - Lexmark 23B0225 | Technical Reference - Page 273
examines the received data stream, attempts to determine the type of data stream, and automatically switches to the proper language. The printer examines the active printer language and decides when an End-of-Job point occurs. End-of-Job points are: • SIC command • UEL command • Print timeout - Lexmark 23B0225 | Technical Reference - Page 274
, all information currently stored on the device is lost. If flash memory or a disk becomes full while downloading resources, a message displays on the printer operator panel or through MarkVision Professional. The file being downloaded is not saved unless room is available to store the entire file. - Lexmark 23B0225 | Technical Reference - Page 275
flash memory and disk or format the flash memory or disk using this printer utility. • A PJL command (see "LDOWNLOADTARGET" on page 3-30 and or symbol sets) in RAM, the resources can be lost if the printer is reset or if the printer language changes while Resource Save is set to Off. In each case, - Lexmark 23B0225 | Technical Reference - Page 276
6-3 Memory Storing Resources on Flash Memory or Disk Complete the following steps to download resources to flash memory or disk using the printer operator panel, MarkVision Professional, or a PJL command. 1 Set the download target to flash memory or disk. Resource Data Collection mode is enabled - Lexmark 23B0225 | Technical Reference - Page 277
or disk is installed. Part Name Part Name as it is stored in the flash memory card header. If flash memory is formatted by the printer, the part name field is shown as FLASH. The part name field for the disk is not printed. - Lexmark 23B0225 | Technical Reference - Page 278
6-5 Memory Part Number Part Number as it is stored in the flash memory card header. If the flash memory is formatted by the printer, the part number field is shown as (none). The part number field for the disk is not printed. Write Password Protected Indicates the entire flash - Lexmark 23B0225 | Technical Reference - Page 279
can be stored on flash memory or disk have unique extensions. The following file types are recognized by the flash format used on earlier printer models; the name of the file type printed in the directory appears in parenthesis. .t1 (PostScript font) .sFnt5 (PCL scalable font) .bFnt5 (PCL bitmap - Lexmark 23B0225 | Technical Reference - Page 280
description field for macros or symbol sets is blank unless the description field in the file header is set by the PJL LRESOURCE command. See "Printer Unique LRESOURCE Variables" on page 3-52. The description for macros or symbol sets can be set only once for files stored in flash memory. The - Lexmark 23B0225 | Technical Reference - Page 281
0), it cannot be changed back to binary 1 without a complete flash memory format. As PostScript emulation file operators write data to flash memory, the printer microcode software verifies that none of the bits being set to binary 1 is binary 0. If any attempt is made to change a 0 bit back to - Lexmark 23B0225 | Technical Reference - Page 282
6-9 Memory Accessing Files with PostScript Emulation File Naming Conventions For any PostScript emulation operator that requires a filename parameter, the filename can be one of the following: %device%filename Specifically references a file on a particular device. If the filename does not exist on - Lexmark 23B0225 | Technical Reference - Page 283
unit and the first (0) logical partition on the device. Currently, one physical device (for ROM, flash memory, and disk) is supported. The disk supports only the first (0) logical partition. Filenames Each file on a device has a unique name to identify the information contained within the file - Lexmark 23B0225 | Technical Reference - Page 284
6-11 Memory The value of this operator adds the extension .data to all filenames referenced when using PostScript emulation file operators. To prevent the .data extension from being added, issue the following PostScript emulation command: statusdict begin false setfilenameextend end To add the . - Lexmark 23B0225 | Technical Reference - Page 285
6-12 Memory Device Search Order If you are using the PostScript emulation operators run, file, renamefile, status or eexec, you do not need to specify the device. If you omit the device name, devices are searched in the default order: disk and then flash memory. If the following PostScript - Lexmark 23B0225 | Technical Reference - Page 286
1MB/second Write 70KB/second 200KB/second Job Buffering Job buffering to the disk lets you store incoming print jobs on a disk installed on your printer. Although job buffering is designed for individual workstations and networks using MarkVision Professional as the primary tool to control - Lexmark 23B0225 | Technical Reference - Page 287
be able to read and write files at a sustained rate of 600Kb/sec. The Lexmark hard disk option supports this requirement. Some advantages of job buffering include: • The printer accepts print jobs more quickly. • The printer accepts print jobs from all ports as long as the disk is not filled. • The - Lexmark 23B0225 | Technical Reference - Page 288
delete or resize the job buffer partition. Recovering from a Power Loss If the printer loses power, the job being spooled to the disk may be lost. Jobs already if you want to print the jobs held in the buffer. See your printer documentation for information on how to cancel the jobs or print the jobs - Lexmark 23B0225 | Technical Reference - Page 289
Specifications This chapter lists printer specifications and information about hardware, environmental conditions, and power requirements. Airflow Requirement Room should meet ASHRAE 62-1989 standards. Noise Emission Levels The following measurements - Lexmark 23B0225 | Technical Reference - Page 290
C760, C762 (low voltage model) 100-127 V at 47/63 Hz C760, C762 (high voltage model) 220-240 V at 47/63 Hz Warning: Lexmark recommends that you do not use voltage converters with printers. Power Requirements The following tables list the nominal average power requirements (including fuser power - Lexmark 23B0225 | Technical Reference - Page 291
Physical Specifications Dimension Height Width Depth Weight C760n/C762n 528.3 mm (20.8 in.) 604.5 mm (23.8 in.) 469.9 mm (18.5 in.) 47.7 kg (105 lb) Printer Model C760dn/C762dn 617.2 mm (24.3 in.) 604.5 mm (23.8 in.) 469.9 mm (18.5 in.) 53.8 kg (118.5 lb) C760dn/C762dtn 734.1 mm (28.9 in - Lexmark 23B0225 | Technical Reference - Page 292
7-4 Specifications Environmental Conditions Note: When shipping or storing printers, always pack the printer supplies (cartridges and photoconductors, for example) separately. Table 7-3: Temperature Ranges Printer Model C760, C762 Operating Value 15.6-32.2°C (60-90°F) Shipping/Storage Value - - Lexmark 23B0225 | Technical Reference - Page 293
the Software and Documentation CD. See "Network Support" on page 8-28 for more information about print servers. See your printer documentation for information on which printer interface options your printer supports and for detailed installation instructions. Note: All print servers are capable of - Lexmark 23B0225 | Technical Reference - Page 294
8-2 Interfaces Setting Up the Communications Port You must establish communication between your printer and computer. To do this, you define your communications port in the application you are using. Instructions for several applications or operating systems are as follows. Setting Up the - Lexmark 23B0225 | Technical Reference - Page 295
example, if you select the COM1 port, then the Settings for COM1 screen displays. 7 Fill out the fields for the following printer settings to make them match your printer settings: • Baud Rate • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if you want DTR protocol or Xon - Lexmark 23B0225 | Technical Reference - Page 296
Communications Port [COM1] Properties screen displays. 9 Click the Port Settings tab. 10 Fill out the fields for the following printer settings to make them match your printer settings: • Bits per second • Data bits • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if you - Lexmark 23B0225 | Technical Reference - Page 297
the Communications Port [COM1] Properties screen displays. 8 Click the Port Settings tab. 9 Fill out the fields for the following printer settings to make them match your printer settings: • Bits per second • Data bits • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if - Lexmark 23B0225 | Technical Reference - Page 298
. Use a serial interface when you: • Require an interface cable more than 10 feet in length. Note: Lexmark also offers a 20-ft parallel interface cable (part number 1427498). • Need to connect the printer to a computer that does not have an available parallel port. Attach network cables to the Token - Lexmark 23B0225 | Technical Reference - Page 299
Interfaces Parallel Interface Use the Lexmark 3.04 m (10 ft) parallel cable part number 1021231, or a cable that is IEEE 1284 compliant, to connect your printer to a personal computer or to a host system with a Centronics-compatible parallel port. See your printer documentation for the location of - Lexmark 23B0225 | Technical Reference - Page 300
remains intact. • Variable default paper size settings become the active paper formatting size. • If paper is loaded in a tray with auto size sensing, the printer resets the active default paper formatting size to the size of the paper in the tray. • INIT* is not honored when Hex Print is active - Lexmark 23B0225 | Technical Reference - Page 301
assignments for connecting the 25-pin connector to the 36-pin connector. The symbol * indicates an active low signal. Printer Side 36-Pin Connector 1284-B Computer Side 25-Pin Connector Note: Lexmark IEEE 1284 compliant cables are supported up to 20 feet. Cable lengths greater than 20 feet are not - Lexmark 23B0225 | Technical Reference - Page 302
are totem-pole TTL devices. All printer input/output (I/O) are devices with an internal pull-up resistor to 5 V. Rise and fall times of each signal must be less than 1,500 nanoseconds (ns) without slope reversal. Note: For best results, use the Lexmark 1.83 m (6 ft) parallel cable, part number - Lexmark 23B0225 | Technical Reference - Page 303
and ACKNLG* signals. Does not carry out data transfer by ignoring the BUSY or ACKNLG* signal. (The system can carry out data transfer to the printer only when the level of the BUSY signal is low and after confirming the ACKNLG* signal is high.) • Uses standard transistor-transistor logic (TTL - Lexmark 23B0225 | Technical Reference - Page 304
personal computers and operating systems. Fastbytes protocol is the printer default. If you have data transmission problems between your personal computer and the printer, change the parallel protocol to Standard. This causes the printer to operate in IEEE-compliant compatibility mode. The following - Lexmark 23B0225 | Technical Reference - Page 305
50 min. 500 min. 400 min. +/ - 20 max. 400 min. Printer-to-Computer Communication (Advanced Status) The printer has a standard IEEE 1284-B compliant connector and is an IEEE 1284-I compliant documentation will be met. The printer supports: • Compatibility mode • Nibble mode • Byte mode • ECP mode - Lexmark 23B0225 | Technical Reference - Page 306
.EXE. Use your web browser to access ftp:// ftp.lexmark.com/pub/driver/technical_brief/LEXPARAL.EXE. When the Advanced Status menu item is set to On, the printer supports IEEE 1284 communication. If the attached host computer does not support IEEE 1284 communication, you can turn Advanced Status to - Lexmark 23B0225 | Technical Reference - Page 307
the printer takes data from the host computer at the trailing edge of STROBE. This is the last possible host driven transition where data should be valid. Note: You may find this feature helpful when having data transfer reliability problems. Signal Descriptions STROBE Receiver for the Lexmark T640x - Lexmark 23B0225 | Technical Reference - Page 308
diagram illustrates the AUTOFD* receiver for the Lexmark T640x. Connector Pin 74LVC161284 470 pF ±10% GND DATA 1-8 Signal Driver/Receivers for the Lexmark T640x The following diagram illustrates the DATA 1-8 signal driver/receivers for the Lexmark T640x. Connector Pin 74LVC161284 GND 150 pF - Lexmark 23B0225 | Technical Reference - Page 309
illustrates the ACKNLG*, ERROR*, SLCT, PE drivers for the Lexmark T640x. 74LVC161284 GND Connector Pin 150 pF ±20% BUSY Driver and INIT* Receiver for the Lexmark T640x The following diagram illustrates the BUSY driver and the INIT* receiver for the Lexmark T640x. INIT* (input) 50K ohm ±5% 1500 - Lexmark 23B0225 | Technical Reference - Page 310
) Lexmark cable to connect a printer and a computer located up to 20 feet apart.) When using the serial interface, your printer has the following differences from the serial interface on some other printers: • The printer returns XON/XOFF with 2 stop bits in all cases. • The printer does not support - Lexmark 23B0225 | Technical Reference - Page 311
-232C Serial Interface Use Lexmark serial cable P/N 1038693 (15.24 m or 50 ft) to connect the serial interface. RS-232C Serial Cable Pin Assignments The RS-232C serial cable appears as follows: 25-Pin 13 25 D-Shell (Male) 25-Pin D-Shell 13 25 (Female) 1 14 Printer Side 1 14 Computer - Lexmark 23B0225 | Technical Reference - Page 312
with Serial Interface RS-232C Note: These instructions are for connecting the printer to an IBM-compatible personal computer using Null modem cables, such as Lexmark part number 1038693 [15.24 m (50 ft)], will connect the converter cable to the printer. The illustration below represents the 25 - Lexmark 23B0225 | Technical Reference - Page 313
-bit data frames and set the serial data transfer parameter so that each data frame contains 7 or 8 data bits. However, your printer is an 8-bit printer; characters, controls, and all points addressable (APA) graphics need 8 bits of data. If you select 7-bit data transfer, some unexpected characters - Lexmark 23B0225 | Technical Reference - Page 314
detects a parity error, the port sends an inverted question mark to the printer instead of the character sent by the host system. The port expects no parity bit. The port uses even parity when it transmits XON and XOFF. Some printers post a 54 Standard Serial Error or a 54 Serial Option x Error (x - Lexmark 23B0225 | Technical Reference - Page 315
XON/XOFF • XON/XOFF/DTR • XON/XOFF/DTR/DSR Your printer supports two modes in which both hardware and software data flow control protocols are performed. In XON XON/XOFF, XON/XOFF/DTR, or XON/XOFF/DTR/DSR pacing. The printer sends a continuous stream of XON signals to the host computer to indicate that - Lexmark 23B0225 | Technical Reference - Page 316
signal in the three data flow control protocols when the Honor DSR setting is Off. Table 8-5: Serial Link (All Protocols) with Honor DSR Off Printer Signal XON/XOFF Protocol (Honor DSR Off) DTR Protocol (Honor DSR Off) DTR/DSR Protocol (Honor DSR Off) DTR (Output) Always active Flow control - Lexmark 23B0225 | Technical Reference - Page 317
low and discards the data. Only DTR/DSR is used for flow control from the printer to the host computer. 4 DTR drops to tell the computer that the receive buffer is nearly full or that the printer is busy and that data transmission should stop. About 640 free bytes remain in the - Lexmark 23B0225 | Technical Reference - Page 318
DSR is low and discards the data. (This is conditional depending on the setting of Honor DSR.) 4 After you power on the printer and DTR is active, the printer sends an XON signal to the computer (DC1 control or X'11'). However, the computer does not need to detect this initial XON before - Lexmark 23B0225 | Technical Reference - Page 319
and your computer operating system must be configured identically. The following is an example of how to configure DOS for the printer using serial DTR protocol: DOS: From the DOS prompt, enter the following commands: mode comy:9600,n,8,1,p mode lptx :=comy where x equals 1, 2, or 3, and y equals - Lexmark 23B0225 | Technical Reference - Page 320
serial devices. • Identify the device. • Locate a driver for the device. • Detect detachment of serial devices. Network Support Installing an internal print server enables you to connect your printer to a local area network (LAN). The print server supports these network interfaces: • The Token-Ring - Lexmark 23B0225 | Technical Reference - Page 321
server. Use one of the following: • Lexmark MarkNet print servers • IBM LAN Connection for Printers and Plotters (IBM 4033) Note: Network capabilities are standard on some printer models. See your printer documentation for more information. Input Buffer Your printer has an input (link) buffer for - Lexmark 23B0225 | Technical Reference - Page 322
1MB 1MB 24K 1MB 150K 1MB 1MB 150K 1MB 300K 1MB 1MB 300K 1MB 300K 2MB 2MB 300K 1MB Note: When using serial communication, the printer signals the host computer to stop transmitting bytes when the serial input buffer is within 640 bytes. In addition, when XON/XOFF protocol is used - Lexmark 23B0225 | Technical Reference - Page 323
select them, see "PCL Emulation" on page 2-1. Table A-2 on page A-6 identifies printer support for the GL/2 commands. Table A-1: PCL Emulation Commands Supported ✘ Not Supported Page numbers reference command descriptions Printer Model T640, T642, T644 Command ESCE ESCY ESCZ ESCz ESC&a#C ESC - Lexmark 23B0225 | Technical Reference - Page 324
T640, T642, T644 Table A-1: PCL Emulation Commands (Continued) Supported ✘ Not Supported Page numbers reference command descriptions Printer Model Command ESC&f#F ESC&f#G ESC&f#O ESC&f#W ESC&f#S ESC&f#X ESC&f#Y ESC&k#G ESC&k#H ESC&k#S ESC&k#W l ESC& #A l ESC& #C l ESC& #D l ESC& #E l ESC - Lexmark 23B0225 | Technical Reference - Page 325
T640, T642, T644 Table A-1: PCL Emulation Commands (Continued) Supported ✘ Not Supported Page numbers reference command descriptions Printer Model Command ESC&p#I ESC&p#S ESC&p#X[data] ESC&r#F ESC&s#C ESC&t#P ESC&u#D ESC(# ESC(#X ESC(3@ ESC(f#W[data] ESC(s#B ESC(s#H ESC(s#P ESC(s#S ESC - Lexmark 23B0225 | Technical Reference - Page 326
PCL Emulation Commands (Continued) Supported ✘ Not Supported Page numbers reference command descriptions Printer Model Command ESC*b#V[data] ESC*b#W[data] 2-52 Download Dither Matrix 2-52 Print Quality 2-56 ✘ Driver Configuration Command 2-52 Push / Pop Palette 2-52 Set - Lexmark 23B0225 | Technical Reference - Page 327
T640, T642, T644 Table A-1: PCL Emulation Commands (Continued) Supported ✘ Not Supported Page numbers reference command descriptions Printer Model Command ESC*p#X ESC*p#Y ESC*r#A ESC*r#F ESC*r#S ESC*r#T ESC*r#U ESC*rB ESC*rC ESC*s#I ESC*s1M ESC*s#T ESC*s#U ESC*s#X ESC*t#H ESC*t#I ESC*t#J ESC - Lexmark 23B0225 | Technical Reference - Page 328
Exit Language (UEL) / Start of PJL 2-35 Table A-2 lists GL/2 commands and identifies the printers that support them. Table A-2: GL/2 Commands Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model T640, T642, T644 Command AA AC AD AR AT BR BZ CF CI CO CP - Lexmark 23B0225 | Technical Reference - Page 329
, T642, T644 Table A-2: GL/2 Commands (Continued) Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command CR DF DI DR DT DV EA EP ER ES EW FI FN FP FP FT FT FT IN IP IR IW LA - Lexmark 23B0225 | Technical Reference - Page 330
, T642, T644 Table A-2: GL/2 Commands (Continued) Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command NP PA PC PD PE PM PP PR PU PW RA RF RO RR RT SA SB SC SD SI SL SM SP - Lexmark 23B0225 | Technical Reference - Page 331
A-9 PCL Support T640, T642, T644 Table A-2: GL/2 Commands (Continued) Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command TR UL WG WU Function Transparency Mode User Defined Line Fill Wedge Pen Width Units Page 2-59 2-59 2-58 2-59 - Lexmark 23B0225 | Technical Reference - Page 332
description. Note: The word common applies to those variables common to both your Lexmark printer and the Hewlett-Packard Company's LaserJet printers. Table B-1: Common Variables for Both Printer Languages Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for - Lexmark 23B0225 | Technical Reference - Page 333
Table B-1: Common Variables for Both Printer Languages (Continued) Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 Variable Name HOLD HOLDKEY - Lexmark 23B0225 | Technical Reference - Page 334
Table B-1: Common Variables for Both Printer Languages (Continued) Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 Variable Name PAGEPROTECT - Lexmark 23B0225 | Technical Reference - Page 335
Unique PJL Variables for Both Printer Languages Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 Variable Name LACTIVEBINRESET LADVANCEDSTATUS - Lexmark 23B0225 | Technical Reference - Page 336
B-5 PJL Support Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 - Lexmark 23B0225 | Technical Reference - Page 337
B-6 PJL Support Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 - Lexmark 23B0225 | Technical Reference - Page 338
Unique PJL Variables for Both Printer Languages (Continued) Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 Variable Name LFAXREDIALFREQUENCY - Lexmark 23B0225 | Technical Reference - Page 339
Unique PJL Variables for Both Printer Languages (Continued) Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 Variable Name Page LLETTERHEADLOADING - Lexmark 23B0225 | Technical Reference - Page 340
Unique PJL Variables for Both Printer Languages (Continued) Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 Variable Name LOPTIONALOUTBIN8NAME - Lexmark 23B0225 | Technical Reference - Page 341
B-10 PJL Support Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model T640, T642, T644 - Lexmark 23B0225 | Technical Reference - Page 342
LTRAY1RENUMBER 3-47 LTYPE1FONTS 3-47 LUSDEFAULTS 3-47 Table B-3: Common Variables for PCL Emulation Supported ✘ Not Supported Page numbers reference variable descriptions. Printer Model T640, T642, T644 Variable Name FONTNUMBER FONTSOURCE PITCH Page 3-48 3-48 3-48 - Lexmark 23B0225 | Technical Reference - Page 343
T644 Variable Name PTSIZE SYMSET Page 3-48 3-48 Table B-4: Printer Unique Variables for PCL Emulation Supported ✘ Not Supported Page numbers reference variable descriptions. Printer Model T640, T642, T644 Variable Name LA4WIDTH LASSIGNFEEDER LASSIGNMANUALENVELOPE LASSIGNMANUALPAPER - Lexmark 23B0225 | Technical Reference - Page 344
T640, T642, T644 Variable Name LPICTUREGRADE LPSFONTPRIORITY Page 3-52 3-52 Table B-7: Printer Unique LRESOURCE Variables Supported ✘ Not Supported Page numbers reference variable descriptions. Printer Model T640, T642, T644 Variable Name LDESCRIPTION LRWLOCK LWLOCK Page 3-53 - Lexmark 23B0225 | Technical Reference - Page 345
Ustatusoff Page 3-54 3-55 3-56 3-58 3-59 3-60 Table B-9: USTATUS Unsolicited Status Variables Supported ✘ Not Supported Page numbers reference variable descriptions. Printer Model Variable Name DEVICE JOB PAGE TIMED Page 3-60 3-60 3-60 3-60 T640, T642 - Lexmark 23B0225 | Technical Reference - Page 346
T640, T642, T644 Table B-10: PJL Messages for Auto-Continuable Conditions Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required - 3-63 30014 50 PPDS Font Error PPDS Font Error Intervention - Lexmark 23B0225 | Technical Reference - Page 347
T640, T642, T644 Table B-10: PJL Messages for Auto-Continuable Conditions (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Intervention Required Parallel Port Disabled Intervention Required Parallel Port Error Intervention Required - Lexmark 23B0225 | Technical Reference - Page 348
Continuable Conditions (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page ✘ Insert Box M Intervention Required Insert Staple Cartridge 3-65 30107 Insert Staple Cartridge ✘ Intervention Required - 3-65 30107 Insert - Lexmark 23B0225 | Technical Reference - Page 349
T640, T642, T644 Table B-10: PJL Messages for Auto-Continuable Conditions (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required Disk Operation Failed Faxes on Disk 3-65 32001 Operation - Lexmark 23B0225 | Technical Reference - Page 350
Fuser/Belt Exhausted ✘ 3-66 40038 83 ITU Maintenance ✘ Table B-11: PJL Messages for Attendance Conditions Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required 30 Coating Roll Missing Intervention - Lexmark 23B0225 | Technical Reference - Page 351
G Intervention Required Defective Print Cartridge 3-67 40021 31 Defective Print Cartridge Intervention Required Defective Ink Cartridge 3-67 40021 31 Defective Cartridge XXXX1 ✘ Intervention Required Missing Cartridge 3-68 40021 31 Missing Cartridge XXXX1 ✘ Intervention Required - 3-68 - Lexmark 23B0225 | Technical Reference - Page 352
Attendance Conditions (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Cover ✘ Intervention Required - 3-69 40021 Insert Print Cartridge ✘ Insert Print Cartridge Intervention Required - 3-69 40022 2xx Paper Jam ✘ - Lexmark 23B0225 | Technical Reference - Page 353
PJL Messages for Attendance Conditions (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention subset of letters CMYK, where CMYK denotes Cyan, Magenta, Yellow, and Black cartridges, respectively. - Lexmark 23B0225 | Technical Reference - Page 354
) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required Toner Low 3-70 40038 88 Yellow Toner Low ✘ 88 Magenta Toner Low 88 Cyan Toner Low 88 Black Toner Low 3-70 88 Color Print Cartridge Low - Lexmark 23B0225 | Technical Reference - Page 355
) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required Replace Oil Coating Roll 3-71 40038 Replace Oil Coating Roll ✘ Intervention Required - 3-71 40039 89 Cartridge Empty ✘ Cartridge Empty - Lexmark 23B0225 | Technical Reference - Page 356
✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String* Intervention Required - 3-73 30034 34 Wrong Paper Size in Tray x ✘ Wrong Paper Size in Tray x Intervention Required - 3-73 30034 34 Wrong Paper Size Manual ✘ Wrong Paper - Lexmark 23B0225 | Technical Reference - Page 357
documentation for return string messages. Table B-13: PJL Messages for Paper Jams Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model T640, T642, T644 Message Page Status Code Intervention Required Paper Jam 3-76 4200x ✘ Intervention Required Paper - Lexmark 23B0225 | Technical Reference - Page 358
T640, T642, T644 Table B-13: PJL Messages for Paper Jams (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-76 4203x ✘ Intervention Required Paper Jam 3-76 4204x ✘ Intervention - Lexmark 23B0225 | Technical Reference - Page 359
T640, T642, T644 Table B-13: PJL Messages for Paper Jams (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-77 4233x ✘ Intervention Required Paper Jam 3-77 4234 ✘ Intervention - Lexmark 23B0225 | Technical Reference - Page 360
T640, T642, T644 Table B-13: PJL Messages for Paper Jams (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-77 4251x ✘ Intervention Required Paper Jam 3-77 4252w ✘ Intervention - Lexmark 23B0225 | Technical Reference - Page 361
T640, T642, T644 Table B-13: PJL Messages for Paper Jams (Continued) Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-78 4272 ✘ Intervention Required Paper Jam 3-78 4273 ✘ Intervention - Lexmark 23B0225 | Technical Reference - Page 362
x represents the number of jammed pages in the printer. y represents the tray number. z represents the bin number. Table B-14: Service Errors Supported ✘ Not Supported Page numbers reference message description. Printer Model Message ALL SERVICE MESSAGES Page Error Code 3-80 50000 ✘ T640 - Lexmark 23B0225 | Technical Reference - Page 363
Message RDYMSG OPMSG STMSG Page 3-80 3-81 3-81 Table B-16: Lexmark Unique PJL Commands Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command LBEEP LDOWNLOADTARGET LPORTROTATE LPRINT testpage • LPRINTDIRECTORY • LPRINTTESTPAGE • LPRINTMENUS - Lexmark 23B0225 | Technical Reference - Page 364
B-33 PJL Support Table B-16: Lexmark Unique PJL Commands (Continued) Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model T640, T642, T644 Command LRUNFILE LRENAMEFILE LDELETEFILE LFORMAT LDEFRAG Page 3-91 3-92 3-92 3-92 3-92 Table B-17: - Lexmark 23B0225 | Technical Reference - Page 365
about PostScript emulation, see "PostScript Emulation" on page 4-1. Table C-1: Supplemental Operators Supported ✘ Not Supported Page numbers reference operator descriptions. Printer Model T640, T642, T644 Operator Name appletalktype buildtime byteorder checkpassword currentfilenameextend - Lexmark 23B0225 | Technical Reference - Page 366
, T642, T644 Table C-1: Supplemental Operators (Continued) Supported ✘ Not Supported Page numbers reference operator descriptions. Printer Model Operator Name doprinterrors doret dostartpage dosysstart duplexer duplexmode enginesync file filenameforall fileposition firstside fontnonzerowinding - Lexmark 23B0225 | Technical Reference - Page 367
T640, T642, T644 Table C-1: Supplemental Operators (Continued) Supported ✘ Not Supported Page numbers reference operator descriptions. Printer Model Operator Name quiet ramsize realformat renamefile resolution revision sccbatch sccinteractive setcoverpage setdefaulttimeouts setdoidlefonts - Lexmark 23B0225 | Technical Reference - Page 368
Table C-1: Supplemental Operators (Continued) Supported ✘ Not Supported Page numbers reference operator descriptions. Printer Model T640, T642, T644 Operator Name setresolution setsccbatch setsccinteractive setsoftwareiomode settumble setuniversalsize setuserdiskpercent softwareiomode tumble - Lexmark 23B0225 | Technical Reference - Page 369
, T642, T644 Table C-2: Page Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model Key - IETPictureGrade - None • TonerSaver • PictureGrade • ImageEnhancement • PrintDarkness • AutoMediaType • EdgeToEdge - Lexmark 23B0225 | Technical Reference - Page 370
T640, T642, T644 Table C-2: Page Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model Key - MatchAll - MediaColor - MediaType - MediaWeight - InputLocation • Mode • Priority Install Jog ManualFeed - Lexmark 23B0225 | Technical Reference - Page 371
T642, T644 Table C-2: Page Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model Key • 3 - Optional Bin 3 • 4 - Optional Bin 4 • 5 - Optional Bin 5 • 6 - Optional Bin 6 • 7 - Optional Bin 7 • 8 - Optional - Lexmark 23B0225 | Technical Reference - Page 372
61 4-61 4-61 4-61 4-61 4-61 Table C-3: User Interpreter Parameters Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key AccurateScreens CollatedCopies HalftoneMode IdiomRecognition JobName JobTimeout MaxDictStack MaxExecStack MaxFontItem - Lexmark 23B0225 | Technical Reference - Page 373
4-64 WaitTimeout system parameter Table C-4: System Interpreter Parameters Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model Key BuildTime ByteOrder CurDisplayList CurFontCache CurFormCache CurInputDevice CurOutlineCache - Lexmark 23B0225 | Technical Reference - Page 374
Table C-4: System Interpreter Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model T640, T642, T644 Key CurPatternCache CurScreenStorage CurSourceList CurUPathCache DisableFastProcs DoPrintErrors DoStartPage - Lexmark 23B0225 | Technical Reference - Page 375
C-4: System Interpreter Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model T640, T642, T644 Key MaxScreenStorage MaxSourceList MaxUPathCache PageCount PanelCode PrinterCode PrinterName RamSize RealFormat - Lexmark 23B0225 | Technical Reference - Page 376
Table C-5: Devices Supported Supported ✘ Not Supported n Network version of the printer model Printer Model Device %ParallelA% %ParallelB% %ParallelC% %ParallelD% %SerialA% %SerialB% %SerialC% %SerialD% %LocalTalkA% %LocalTalkB% %LocalTalkC% %LocalTalkD% %EtherTalkA% %EtherTalkB% %EtherTalkC% % - Lexmark 23B0225 | Technical Reference - Page 377
Table C-5: Devices Supported (Continued) Supported ✘ Not Supported n Network version of the printer model Printer Model Device Page %AppSocketC% 4-65 ✘ ✘ ✘ %AppSocketD% ✘✘✘ %RemotePrinterA% ✘✘✘ %RemotePrinterB% ✘✘✘ %RemotePrinterC% ✘✘✘ %RemotePrinterD% ✘✘✘ %PrintServerA% ✘✘✘ % - Lexmark 23B0225 | Technical Reference - Page 378
T640, T642, T644 Table C-6: Device Parameters Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Device Parameters for the Communication Device %Parallel%, %ParallelA%, %ParallelB%, %ParallelC%, %ParallelD% DelayedOutputClose 4-72 Enabled - Lexmark 23B0225 | Technical Reference - Page 379
T640, T642, T644 Table C-6: Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page PCLSmartSwitch 4-74 PortLocation 4-74 PSSmartSwitch 4-74 RobustXon 4-74 SerialMode 4-74 StopBits 4-75 Type - Lexmark 23B0225 | Technical Reference - Page 380
T640, T642, T644 Table C-6: Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page HasNames 4-77 Interpreter 4-77 NodeID 4-77 On 4-77 PCLSmartSwitch 4-77 PortLocation 4-77 PSSmartSwitch - Lexmark 23B0225 | Technical Reference - Page 381
T640, T642, T644 Table C-6: Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page PSSmartSwitch 4-79 Type 4-79 Device Parameters for the Communication Device %TokenTalk%, %TokenTalkA%, %TokenTalkB%, %TokenTalkC - Lexmark 23B0225 | Technical Reference - Page 382
T640, T642, T644 Table C-6: Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Device Parameters for the Communication Device %AppSocket%, %AppSocketA%, %AppSocketB%, %AppSocketC%, %AppSocketD% DelayedOutputClose - Lexmark 23B0225 | Technical Reference - Page 383
T640, T642, T644 Table C-6: Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page PortLocation 4-83 Type 4-83 Device Parameters for the Communication Device %LPR%, %LPR_A%, %LPR_B%, %LPR_C%, %LPR_D% Enabled - Lexmark 23B0225 | Technical Reference - Page 384
, T644 Table C-6: Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Device Parameters for the Communication Device %EthernetPhysical%, %EthernetPhysicalA%, %EthernetPhysicalB%, %EthernetPhysicalC%, %EthernetPhysicalD - Lexmark 23B0225 | Technical Reference - Page 385
T640, T642, T644 Table C-6: Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Month Running Second Type Year DateTime DayOfWeekLong DayOfWeekNum DayOfWeekShort Page 4-88 4-88 4-88 4-88 4-88 4-88 - Lexmark 23B0225 | Technical Reference - Page 386
T642, T644 Table C-6: Device Parameters (Continued) Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Device Parameters for the Parameters Device %disk1% BlockSize 4-88 Free 4-88 HasNames 4-88 InitializeAction 4-89 LogicalSize - Lexmark 23B0225 | Technical Reference - Page 387
4-91 SearchOrder 4-91 Type 4-91 Writeable 4-91 Table C-7: PostScript Commands: Message Keys Supported ✘ Not Supported Page numbers reference status message key and value descriptions. Printer Model T640, T642, T644 Key job status source Page 4-93 4-93 4-93 - Lexmark 23B0225 | Technical Reference - Page 388
disk option, download target (PJL) 3-30 drivers ACKNLG* Lexmark C510 8-17 ERROR* Lexmark C510 8-17 PE Lexmark C510 8-17 SLCT Lexmark C510 8-17 DSR protocol 8-24 DTR protocol supported 4-9 Lexmark C510(n) 2-4 environmental commands and variables (PJL) 3-7 environmental conditions 7-4 errors, service - Lexmark 23B0225 | Technical Reference - Page 389
Collection mode 6-2 retrieval speed 6-13 rewriting contents 6-8 storing fonts, macros, and symbol sets 6-2 viewing the contents 6-3 fonts PCL emulation Lexmark X422 2-7 printing directory list for flash or disk 3-83, 6-3 saving on flash memory or disk 6-3 setting password protection 3-93 formatting - Lexmark 23B0225 | Technical Reference - Page 390
handling 3-72 paper sizes status message codes 3-74 paper sizes supported Lexmark C510(n) 2-4 paper trays PCL emulation paper size 2-36 paper source 2-36 PostScript emulation automatic size sensing search order 4-4 operators 4-6 Printer Job Language (PJL) paper size 3-14 paper source 3-39 status - Lexmark 23B0225 | Technical Reference - Page 391
two 2-53 color lookup tables 2-52 configure image data 2-53 driver configuration command 2-52 foreground color 2-53 gamma correction 2-53 monochrome number of collated copies 2-34 number of copies 2-34 output bin 2-38 printer reset 2-34 short-edge offset registration 2-34 simplex/duplex print 2-34 - Lexmark 23B0225 | Technical Reference - Page 392
set control 2-44 symbol set ID code 2-44 control codes 2-31 font and symbol set support Lexmark X422 2-7 GL/2 Language 2-56 linking commands 2-32 paper and envelope dimensions Lexmark C510(n) 2-4 password protection 3-93 saving files on flash memory or disk 6-3 selecting MarkVision Professional - Lexmark 23B0225 | Technical Reference - Page 393
6-9 device parameters 4-71 device search order 6-12 envelope size support 4-9 filenames 6-9 interpreter parameters 4-62 page device parameters 4-48 4-4 paper tray commands manualfeed 4-7 papertray 4-7 setpapertray 4-8 paper tray support 4-4 password protecting Type 1 fonts on flash memory or disk 3- - Lexmark 23B0225 | Technical Reference - Page 394
operator panel 4-1 power requirements 7-2 printable areas 2-3, 2-5 Printer Job Language (PJL) attendance messages 3-67 30 Print Unit Missing 3-67 30 Coating Roll Missing 3-67 31 Defective Cartridge XXXX 3-67 31 Defective Print Cartridge 3-67 31 Missing Cartridge XXXX 3-68 31 Missing Printhead 3-68 - Lexmark 23B0225 | Technical Reference - Page 395
Size in Tray x 3-73 34 Wrong Paper Size Manual Feed 3- 73 Change 3-73 Check Paper Guide 3-73 Insert Duplex Pages & Press Go. 3-73 Kit 3-71 Replace PC Kit To Continue 3-71 Replace Toner Cartridge 3-71 Replace Toner Cartridge To Continue 3-71 Replace Transfer Kit 3-71 STMSG message - Lexmark 23B0225 | Technical Reference - Page 396
66 83 ITU Maintenance 3-66 Disk Corrupted. Reformat? 3-66 Empty Box M 3-65 Held Jobs May Not Be Restored 3-63 Insert Box M 3-65 Insert Staple Cartridge 3-65 Insert Stapler 3-65 Operation Failed Faxes on Disk 3-65 Operation Failed Jobs on Disk 3-65 Priming Failed, Retry. Go/Stop? 3-65 Print Jobs on - Lexmark 23B0225 | Technical Reference - Page 397
Cartridge Low 3-61 88 Toner Low 3-61, 3-62 88 Yellow Toner Low 3-61 Bin Full 3-62 Busy 3-62 Cancelling Job 3-62 Not Ready 3-61 Power Saver with 88 Ink common variables all printer languages 3-12 PCL emulation 3-48 PostScript emulation 3-51 printer unique all printer languages 3-19 LRESOURCE - Lexmark 23B0225 | Technical Reference - Page 398
LBITMAPROUNDING 3-50 LBLANKPAGES 3-19 LBONDLENGTH 3-19 LBONDLOADING 3-19 LBONDOUTBIN 3-20 LBONDTEXTURE 3-20 LBONDWEIGHT 3-20 LBWLOCK 3-20 LCANCEL 3-20 LCARDSTOCKLENGTH 3-20 LCARDSTOCKLOADING 3-20 LCARDSTOCKOUTBIN 3-21 LCARDSTOCKTEXTURE 3-21 LCARDSTOCKWEIGHT 3-21 LCOLLATION 3-21 LCOLORCORRECTION 3-21 - Lexmark 23B0225 | Technical Reference - Page 399
LIMAGEORIENTATION 3-33 LIMAGESMOOTHING 3-33 LINFEEDERSIZE 3-33 LINKALERT 3-33 LINMPFEEDERSIZE 3-33 LJAMRECOVERY 3-33 LLABELSLENGTH 3-33 LLABELSLOADING 3-33 LLABELSOUTBIN 3-34 LLABELSTEXTURE 3-34 LLABELSWEIGHT 3-34 LLASTTRAYRENUMBER 3-34 LLEFTMARGINOFFSET 3-34 LLETTERHEADLENGTH 3-34 - Lexmark 23B0225 | Technical Reference - Page 400
printer languages, selecting MarkVision Professional 2-1 methods 5-1 operator panel 2-1, 4-1 PCL emulation 2-1 Printer 2-2 switching 5-1 printer specifications airflow requirement compression 2-64 delta row 2-63 group 3 and 4 2-65 Lexmark adaptive 2-66 run-length encoded data 2-62 Tagged Image File - Lexmark 23B0225 | Technical Reference - Page 401
list flash memory or disk 6-3 selecting Lexmark E323 2-14 Lexmark T630 2-14 Lexmark T632 2-14 Lexmark T634 2-14 setting password protection 3-93 storing on flash memory or disk 6-3 support ISO fonts 2-29 syntax, commands PCL emulation 2-31 Printer Job Language 3-1 T test page, printing from - Lexmark 23B0225 | Technical Reference - Page 402
Language 3-2 V variables, PJL common for all printer languages 3-12 common for PCL emulation 3-48 common for PostScript emulation 3-51 environment 3-7 printer unique for all printer languages 3-19 printer unique for PCL emulation 3-49 W weight, printer 7-3 whole page setting 2-6 X XON/XOFF protocol
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
 |
 |
www.lexmark.com
March 2006
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries.
© 2006 Lexmark International, Inc.
740 West New Circle Road
Lexington, Kentucky 40550
Technical Reference