Lexmark 33S0300 Technical Reference
Lexmark 33S0300 - Mono Chrome Laser Printer Manual
 |
UPC - 734646013284
View all Lexmark 33S0300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark 33S0300 manual content summary:
- Lexmark 33S0300 | Technical Reference - Page 1
Technical Reference May 2007 www.lexmark.com Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2007 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550 - Lexmark 33S0300 | Technical Reference - Page 2
product, visit the Lexmark Web site at www.lexmark.com. References in this publication to products, programs, or services do not imply that Company's designations of a set of printer commands (language) and functions included in its printer products. These printers are intended to be compatible with - Lexmark 33S0300 | Technical Reference - Page 3
™ E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, E450dn 2-4 Print Area Menu Item 2-6 Font and Symbol Set Support for the Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn 2-8 Forward and Backward Compatibility Modes for the - Lexmark 33S0300 | Technical Reference - Page 4
TOC-2 Contents Macros...2-85 Printer Job Language 3-1 PJL Handling 3-72 Operator Intervention - Paper Jams 3-75 Service Errors 3-80 Device Attendance Commands 3-80 Unique PJL Commands 4-2 Paper Tray Support 4-5 Envelope Size Support 4-10 Envelope Tray Support 4-12 Supplemental Operator - Lexmark 33S0300 | Technical Reference - Page 5
4-93 Tagged Binary Active 4-93 Status Messages 4-94 Switching Languages 5-1 SmartSwitch ...5-1 Setting SmartSwitch for Different Interfaces 5-2 Printer Job Language 5-2 Sniffing...5-3 Flash Memory and Disk 6-1 Resource Data Collection (Download Target 6-2 Storing Resources on Flash Memory - Lexmark 33S0300 | Technical Reference - Page 6
7-7 Altitude Specifications 7-7 Atmospheric Pressure 7-7 Printer Interfaces 8-1 Setting Up the Communications Port Connector 8-8 Using the INIT* Signal to Initialize 8-8 Computer-to-Printer Communications 8-8 Printer-to-Computer Communication (Advanced Status 8-13 Parallel Mode 1 8- - Lexmark 33S0300 | Technical Reference - Page 7
TOC-5 Contents PCL Support A-1 PJL Support B-1 PostScript Support C-1 Index X-1 - Lexmark 33S0300 | Technical Reference - Page 8
CHAPTER 1: Introduction Overview The following edition of the Technical Reference contains information about printer commands and printer languages supported by the following Lexmark printers: • Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, E450dn To - Lexmark 33S0300 | Technical Reference - Page 9
, including information about hardware and environmental conditions. Chapter 8: "Printer Interfaces" Provides information on printer interfaces, including information about parallel and serial interface, network support, and communication protocols. See the tables in the three appendixes - Lexmark 33S0300 | Technical Reference - Page 10
1-3 Introduction Appendix A: "PCL Support" Appendix B: "PJL Support" Appendix C: "PostScript Support" - Lexmark 33S0300 | Technical Reference - Page 11
for online viewing, you can print a hard copy by clicking File on the toolbar, and then choosing Print. Make sure you've selected the correct printer, range of pages, and number of copies before you click OK. You should be aware that if you print this document on a color - Lexmark 33S0300 | Technical Reference - Page 12
, C2121-90101 • Hewlett-Packard LaserJet 4 Typography and Graphics, Random House Electronic Publishing • Hewlett-Packard PCL 5 Printer Language Technical Reference Manual, 5961-0509 • Hewlett-Packard PostScript SIMM Technical Reference, I/O Device Operators and Parameters, C2080-90921 • Hewlett - Lexmark 33S0300 | Technical Reference - Page 13
to select PCL emulation and discusses PCL emulation commands, along with resident PCL emulation font and symbol set support. To determine which commands your printer supports, see Appendix A: "PCL Support" on page A-1. Selecting PCL Emulation Using SmartSwitch When SmartSwitch is enabled for both - Lexmark 33S0300 | Technical Reference - Page 14
(PJL) Enter Language Command. See "ENTER LANGUAGE Command" on page 3-3 for more information. See "Printer Job Language" on page 3-1 for the syntax and use of PJL. Warning: When you change printer languages, you may lose some or all previously downloaded resources, unless Resource Save is set to On - Lexmark 33S0300 | Technical Reference - Page 15
on page 2-4 list the page sizes and dimensions of each area labeled on the preceding diagram for all paper and envelope sizes your printer supports. If information about your printer is not included in the following tables, see page 1-1 for information on how to get a Technical Reference for your - Lexmark 33S0300 | Technical Reference - Page 16
2-54. 3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application. 4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet - Lexmark 33S0300 | Technical Reference - Page 17
2-54. 3 The width of the logical page for A4 paper can be changed from the printer operator panel or your software application. 4 Paper ID 99 will be supported for backward compatibility with other Lexmark printers. Paper ID 99 has the same logical paper size as ID 100 (compatible with HP LaserJet - Lexmark 33S0300 | Technical Reference - Page 18
page. The Print Area menu item is available from the printer operator panel or through MarkVision Professional. For some printers, Print Area supports three values: Normal, Whole Page, and Fit to Page. See your printer documentation for more information . Normal setting Whole Page setting Legend - Lexmark 33S0300 | Technical Reference - Page 19
a small margin around the image. This artificial margin prevents printing from one edge to the other, since doing so could contaminate the printer and cause printing problems. The following illustrations show an image held in memory for printing from one edge to the other and how the image would - Lexmark 33S0300 | Technical Reference - Page 20
2-8 PCL Font and Symbol Set Support for the Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Your printer has 91 resident fonts in PCL emulation, including 89 scalable fonts and two bitmapped fonts. The E120 and E120n has 19 resident fonts including 17 - Lexmark 33S0300 | Technical Reference - Page 21
The backward compatibility mode is used for compatibility with the Hewlett-Packard Company's LaserJet 5 and the Lexmark family of printers. Note: Lexmark E120 and E120n support Backward Compatibility Modes, but not Forward Compatibility Modes. Standard PCL Emulation Fonts The following table lists - Lexmark 33S0300 | Technical Reference - Page 22
2-10 PCL Table 2-2: Forward and Backward Compatibility Font Selection Commands (Continued) Forward and Backward Compatibility Mode Standard PCL Emulation Font Name Spacing Style Weight CG Times Italic 1 1 0 CG Times Bold 1 0 3 CG Times Bold Italic 1 1 3 Univers Medium 1 0 0 - Lexmark 33S0300 | Technical Reference - Page 23
fonts work only in the forward compatibility mode. With the appropriate printer driver installed and selected, your software program selects these fonts. The Type 1 fonts are supported by both the Hewlett-Packard Company's LaserJet 4050 and the Lexmark family of printers unless otherwise noted. - Lexmark 33S0300 | Technical Reference - Page 24
compatibility modes differ slightly for Bold. 2 This font is not implemented in the Hewlett-Packard Company's LaserJet 4050. 3 This font is not implemented in the Lexmark family of printers. 0 61483 -3 61444 -3 61444 5 61444 5 61444 - Lexmark 33S0300 | Technical Reference - Page 25
Lexmark family of printers. Your Lexmark printer defaults to the forward compatibility mode to enable a HewlettPackard Company's driver to select the forward compatibility fonts. The Lexmark PCL emulation driver listed together in the table. These fonts are supported only in PCL 5 emulation, not in - Lexmark 33S0300 | Technical Reference - Page 26
PCL Emulation Symbol Sets - Specials" on page 2-43. Selecting Symbol Sets for the Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn To determine if a font or typeface supports a symbol set, see the complete listing of PCL emulation fonts and symbol sets in - Lexmark 33S0300 | Technical Reference - Page 27
E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol Sets - Specials" on page 2-43 Table 2-5: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Bold Italic ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 28
2-16 PCL Table 2-5: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol Omega CG Omega Italic CG Omega Bold CG Omega Bold Italic ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 29
2-17 PCL Table 2-5: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Narrow Bold Italic Palatino Roman Palatino Italic Palatino Bold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 30
2-18 PCL Table 2-5: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Oblique CourierPS Bold CourierPS Bold Oblique Times Roman ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 31
2-19 PCL Table 2-5: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Helvetica Light Oblique Helvetica Black Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular C39 Wide - Lexmark 33S0300 | Technical Reference - Page 32
Bold Italic Times New Roman Times New Roman Italic Times New Roman Bold Times New Roman Bold Italic Arial Arial Italic Arial Bold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 33
Garamond Antiqua Garamond Kursiv Garamond Halbfett Garamond Kursiv Halbfett CG Omega CG Omega Italic CG Omega Bold CG Omega Bold Italic Antique Olive ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 34
Bold Helvetica Bold Italic Helvetica Narrow Helvetica Narrow Italic Helvetica Narrow Bold Helvetica Narrow Bold Italic Palatino Roman Palatino Italic Palatino Bold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 35
ITC Avant Garde Demi Oblique Century Schoolbook Roman Century Schoolbook Italic Century Schoolbook Bold Century Schoolbook Bold Italic ITC Zapf Chancery Medium Italic ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 36
Helvetica Light Helvetica Light Oblique Helvetica Black Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular C39 Wide OCR-A OCR-B ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 37
Value Symbol Set ID Wingdings Symbol SymbolPS Latin 2 Latin 5 Latin 6 ITC Zapf Dingbats ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. 9E WINL2 Windows 98 Latin 2 2N ISOL2 ISO 8859-2 Latin 2 17U PC852 - Lexmark 33S0300 | Technical Reference - Page 38
2-26 PCL Table 2-7: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Arial Arial Italic Arial Bold Arial Bold Italic Letter Gothic ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 39
2-27 PCL Table 2-7: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Albertus Medium Albertus Extra Bold Clarendon Condensed Bold Marigold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 40
2-28 PCL Table 2-7: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Garde Book Oblique ITC Avant Garde Demi ITC Avant Garde Demi Oblique ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 41
2-29 PCL Table 2-7: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Helvetica Black Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular ✓ Indicates Typeface supports the specified Symbol Set. ✘ - Lexmark 33S0300 | Technical Reference - Page 42
OCR-A OCR-B Wingdings Symbol SymbolPS ITC Zapf Dingbats ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. Table 2-8: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d - Lexmark 33S0300 | Technical Reference - Page 43
Spanish 4S ISO 16: Portuguese 5S ISO 84: Portuguese 1D ISO 61: Norwegian Version 2 Table 2-9: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Courier Bold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 44
2-32 PCL Table 2-9: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Arial Bold Arial Bold Italic Letter Gothic Letter Gothic Italic ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 45
2-33 PCL Table 2-9: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Bold Albertus Medium Albertus Extra Bold Clarendon Condensed Bold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 46
2-34 PCL Table 2-9: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol ITC Bookman Demi ITC Bookman Demi Italic ITC Avant Garde Book ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 47
2-35 PCL Table 2-9: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Italic Helvetica Light Helvetica Light Oblique Helvetica Black ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 48
2-36 PCL Table 2-9: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL 9J 25U 23U 21U 20U Symbol Set ID Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular C39 Wide OCR-A OCR-B - Lexmark 33S0300 | Technical Reference - Page 49
2-37 PCL Table 2-10: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol Sets - Latin Times New Roman Bold Times New Roman Bold Italic Arial ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 50
2-38 PCL Table 2-10: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol Sets - Halbfett CG Omega CG Omega Italic CG Omega Bold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 51
2-39 PCL Table 2-10: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol Sets - Bold Helvetica Narrow Bold Italic Palatino Roman ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 52
2-40 PCL Table 2-10: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol Sets Schoolbook Roman Century Schoolbook Italic Century Schoolbook Bold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 53
2-41 PCL Table 2-10: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular ✓ Indicates Typeface supports the specified Symbol Set. - Lexmark 33S0300 | Technical Reference - Page 54
2-42 PCL Table 2-10: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Symbol OCR-B Wingdings Symbol SymbolPS ITC Zapf Dingbats ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 55
2-43 PCL Table 2-11: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Arial Arial Italic Arial Bold Arial Bold Italic Letter Gothic ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 56
2-44 PCL Table 2-11: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Albertus Medium Albertus Extra Bold Clarendon Condensed Bold Marigold ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 57
2-45 PCL Table 2-11: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn PCL Emulation Garde Book Oblique ITC Avant Garde Demi ITC Avant Garde Demi Oblique ✓ Indicates Typeface supports the specified Symbol Set. ✘ Indicates Typeface does not - Lexmark 33S0300 | Technical Reference - Page 58
2-46 PCL Table 2-11: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Helvetica Black Helvetica Black Oblique Line Printer 16 POSTNET Barcode C39 Narrow C39 Regular ✓ Indicates Typeface supports the specified Symbol Set. ✘ - Lexmark 33S0300 | Technical Reference - Page 59
the specified Symbol Set. ✘ Indicates Typeface does not support the specified Symbol Set. All fonts that support the Roman-8 (8U) symbol set also support the following 19 symbol sets. Table 2-12: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn ISO - Lexmark 33S0300 | Technical Reference - Page 60
2-48 PCL Table 2-12: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, demonstrates how you can link commands to abbreviate them. Control Codes Control Codes are single-character instructions. Table 2-13: Control Codes Code Dec Hex Function BS 8 08 Backspace HT 9 09 - Lexmark 33S0300 | Technical Reference - Page 61
(also known as "escape sequences") that begin with the Escape control code (ESC, ←, decimal 27, or hexadecimal 1B). The ESC control code notifies the printer that the characters that follow are to be interpreted as part of a command and are not control codes or data to be printed. Command Structure - Lexmark 33S0300 | Technical Reference - Page 62
of each printed page begins at column 63. That margin stays constant until a right margin command with a different value resets it or until the printer is reset. Parameters for each command are listed in the command tables beginning on page 2-52. Use the Symbol Set Tables to determine the decimal - Lexmark 33S0300 | Technical Reference - Page 63
form: ESC(s10HESC(s3BESC(s4099T PCL Emulation Commands See the following tables for a listing of the commands grouped by function. To determine which commands your printer supports, see "Table A-1: PCL Emulation Commands" on page A-1. - Lexmark 33S0300 | Technical Reference - Page 64
Duplex First Sides 101 Manual Duplex Second Sides l ESC& #U # = number of Decipoints Range = -32767 to 32767 (1 Decipoint = 1/720 inch) Default = 0 l ESC& #Z # = number of Decipoints Range = -32767 to 32767 (1 Decipoint = 1/720 inch) Default = 0 Function / Result Printer Reset • Prints any partial - Lexmark 33S0300 | Technical Reference - Page 65
data for bitmapped fonts, raster graphics, or user defined fill patterns. ESC% - 12345X Universal Exit Language (UEL) / Start of PJL This command terminates the current printer language and allows switching into PJL. For more information, see "UNIVERSAL EXIT LANGUAGE Command" on page 3-2. - Lexmark 33S0300 | Technical Reference - Page 66
0 Active Source or Eject Page 1 Tray 1 (Default) 2 Manual Paper Feed 3 Manual Envelope Feed 4 Tray 2 5 Tray 3 6 Optional Envelope Feeder tables beginning on page 2-1 for the paper and envelope dimensions your printer supports. If the requested page size is not in the requested source - Lexmark 33S0300 | Technical Reference - Page 67
2-55 PCL Table 2-16: Page Control (Continued) Command / Parameters ESC&f#W [custom name] # = number of bytes in the custom name l ESC& #O 0 Portrait (Default) 1 Landscape 2 Reverse Portrait 3 Reverse Landscape ESC&a#P # = Degrees (0, 90, 180, 270) Default = 0 ESC&c#T 0 Horizontal Printing -1 - Lexmark 33S0300 | Technical Reference - Page 68
Motion Index (VMI) Sets Vertical Motion Index in 1/48 inch increments. The VMI determines the vertical distance between lines. Notes: • For some printers, you can change the default VMI from the printer operator panel or through MarkVision Professional by using the Lines Per Page menu item. See your - Lexmark 33S0300 | Technical Reference - Page 69
Mode OFF Turn Text Scale Mode ON Function / Result Set Line Spacing (Alternative Method) Specifies VMI in lines per inch. Notes: • For some printers, you can change the default VMI from the printer operator panel or through MarkVision Professional by using the Lines Per Page menu item. See your - Lexmark 33S0300 | Technical Reference - Page 70
2-58 PCL Table 2-17: Alphanumeric ID Command / Parameters ESC&n#W [operation] [string] # = number of data bytes that make up the operation and string Operation operation = 100 or 1 byte = 0x64 or 'd' ascii For example: 100 Media Select String string = See Alphanumeric String list at - Lexmark 33S0300 | Technical Reference - Page 71
Line-Feed Moves the cursor down 1/2 line (1/2 of the current VMI). ESC&k#G Set Line Termination 0 CR=CR, LF=LF, FF=FF (Default) Controls how the printer responds to the Carriage Return (CR), Line 1 CR=CR+LF, LF=LF, FF=FF Feed (LF), and Form Feed (FF) control codes. 2 CR=CR, LF - Lexmark 33S0300 | Technical Reference - Page 72
physical traits of a character and the composition of the font symbols. Note: You can only use this command to select fonts currently available in the printer. It cannot alter the appearance of the available fonts. - Lexmark 33S0300 | Technical Reference - Page 73
of typeface numbers, see Table 2-2 on page 2-9 and "Font and Symbol Set Support for the Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d the font list from the printer operator panel or through MarkVision Professional. See your printer documentation for more information. On - Lexmark 33S0300 | Technical Reference - Page 74
2-62 PCL Table 2-19: Font Selection (Continued) Command / Parameters Function / Result ESC&t#P Text Parsing Method 0, 1 21 31 38 1008 1 byte characters 1 or 2 byte characters 1 or 2 byte characters 1 or 2 byte characters 1, 2, or 3 byte characters (UTF-8) Communicates to the PCL parser - Lexmark 33S0300 | Technical Reference - Page 75
ID Sets the ID for the macro you have created on flash or disk. Macro Control Manages use of macros. Notes: • GL/2 commands are supported inside macros. • Only call and execute macro commands are allowed within a macro. • A macro may call or execute another macro. This is called nesting. A maximum - Lexmark 33S0300 | Technical Reference - Page 76
2-64 PCL Table 2-23: Print Model Command / Parameters ESC*c#G Gray Scale Fills 0 1-2 3-10 11-20 21-35 36-55 56-80 81-99 100 White (default) 2% gray 10% gray 15% gray 30% gray 45% gray 70% gray 90% gray 100% gray (Black) Cross-Hatch Fills 1 Horizontal line 2 Vertical line 3 Diagonal - Lexmark 33S0300 | Technical Reference - Page 77
2-65 PCL Table 2-24: User-Defined Pattern Command / Parameters ESC*c#W[data] # = number of data bytes ESC*p#R 0 Rotate with print (Default) 1 Fixed ESC*c#Q 0 Delete all patterns (temporary and permanent) 1 Delete all temporary patterns 2 Delete pattern (last ID specified) 4 Make pattern of last ID - Lexmark 33S0300 | Technical Reference - Page 78
2-66 PCL Table 2-25: Rectangular Area Fill Graphics (Continued) Command / Parameters ESC*c#G Gray Scale Fills 0 1-2 3-10 11-20 21-35 36-55 56-80 81-99 100 White (default) 2% Gray 10% Gray 15% Gray 30% Gray 45% Gray 70% Gray 90% Gray 100% Gray (Black) Cross-Hatch Fills 1 Horizontal Line 2 - Lexmark 33S0300 | Technical Reference - Page 79
On ESC*b#V[data] # = Number of Data Bytes ESC*b#Y # = Number of Raster Lines Function / Result Raster Resolution Note: 200 dpi is only supported when the printer is operating in 600 dpi or 1200 dpi mode. Raster Graphics Presentation Sets the Raster Image Orientation in relation to the logical - Lexmark 33S0300 | Technical Reference - Page 80
2-68 PCL Table 2-26: Raster Graphics (Continued) Command / Parameters Function / Result ESC*b#M Set Raster Compression Mode 0 1 2 3 5 9 999 1002 1003 1004 1005 1006 1007 1008 Uncoded (Default) Run-Length Encoded Tagged Image File Format (TIFF) byte Delta Row Adaptive Compression Replacement - Lexmark 33S0300 | Technical Reference - Page 81
2-69 PCL Table 2-26: Raster Graphics (Continued) Command / Parameters ESC*t#V ESC*g#W[data] # - 8 (K-only) or 26 (KCMY) Data Byte 0 - 0x02 (constant) Byte 1 - number of colors 0x01 - K only 0x04 - CMYK Byte 2,3 - X res for K plane 0x012C (300) or 0x0258 (600) Byte 4,5 - Y res for K plane 0x012C ( - Lexmark 33S0300 | Technical Reference - Page 82
data that specifies a matrix or matrices for the primary colors Downloads a device dependent user-defined dither matrix. ESC*o#W[data] Driver Configuration Command 1 to 32767, Data Specifies lightness, saturation, and image scaling Indicates the lightness, saturation, and scaling algorithm to - Lexmark 33S0300 | Technical Reference - Page 83
2-71 PCL Table 2-27: Color Extensions (Continued) Command / Parameters ESC*t#I 0 0.0 to 4.0 Gamma Correction Off Gamma Number ESC*t#J ESC*v#A -32767.0 to 32767.0 ESC*v#B -32767.0 to 32767.0 ESC*v#C -32767.0 to 32767.0 ESC*v#I # = Palette Index 0 to 2n - 1 = Palette Index ESC*v#S # = Palette - Lexmark 33S0300 | Technical Reference - Page 84
Set Status Readback Location Type Sets the status location type to the specified value. The 5 value for Cartridge may be specified, but since your printer does not support font cards or cartridges, the command is ignored. The 7 value for User-installable flash is only valid when flash memory is - Lexmark 33S0300 | Technical Reference - Page 85
2-73 PCL Table 2-29: Picture Frame Command / Parameters ESC*c#X # of Decipoints: 0 to 32767 (1 Decipoint = 1/720 inch) ESC*c#Y # of Decipoints: 0 to 32767 (1 Decipoint = 1/720 inch) ESC*c0T 0 Set Anchor Point to Cursor Position ESC*c#K Size in inches: 0 to 32767 ESC*c#L Size in inches: - Lexmark 33S0300 | Technical Reference - Page 86
Miscellaneous Commands (Continued) Command / Parameters ESCZ ESCz ESC*o#M(b) -1 Ink Saver 0 Normal 1 Best l ESC& #M(b) 0 Plain Paper printer driver written explicitly for GL/2. The following tables list the GL/2 commands by group. To determine which GL/2 commands your printer supports - Lexmark 33S0300 | Technical Reference - Page 87
2-75 PCL Table 2-31: Configuration Group (Continued) Command / Parameter IR (XP1, YP1, XP2, YP2)); IW (X1, Y1, X2, Y2); MC (mode(, opcode)); PP (mode); RO (angle); SC (Xmin, Xmax, Ymin, Ymax(, type(, left, bottom))); Command Name Input Relative P1 and P2 Input Window Logical Operation Pixel - Lexmark 33S0300 | Technical Reference - Page 88
2-76 PCL Table 2-33: Polygon Group (Continued) Command / Parameter RR X, Y; WG radius, start_angle, sweep_angle(, chord_angle); Command Name Fill Rectangle Relative Fill Wedge Table 2-34: Character Group Command / Parameter AD (kind, value(,...)); CF (mode(, pen)); CP (spaces, lines); DI (run, - Lexmark 33S0300 | Technical Reference - Page 89
2-77 PCL Table 2-35: Line and Fill Attributes Group Command / Parameter Command Name AC (X, Y); Anchor Corner CR (red black ref, red white ref, green black ref, green white ref, blue black ref, blue white ref); FT (fill_type(, option1(, option2)); Color Range Fill Type FT22, (PCL User- - Lexmark 33S0300 | Technical Reference - Page 90
height and width, and start raster graphics. These parameters are in effect until you overwrite them with a different command or there is a printer reset. To ensure that the printed image appears in the expected area, set width and height parameters. Raster Compression Mode The Raster Compression - Lexmark 33S0300 | Technical Reference - Page 91
2-79 PCL Descriptions and examples of the different parameters appear on the following pages. Each example draws the same square outline 64 bits (8 bytes) wide by 64 scan lines long. Uncoded Data Uncoded Data is not compressed. Only those bytes needed to form the image are sent. Each bit - Lexmark 33S0300 | Technical Reference - Page 92
2-80 PCL Run-Length Encoded Data Run-Length Encoded Data is interpreted in pairs of bytes. The first byte: • Acts as a counter, or control byte. • Indicates how many times to repeat the data in the second byte. • Can be from 0 (no repetition) to 255. • The second byte is the data byte. Example: - Lexmark 33S0300 | Technical Reference - Page 93
2-81 PCL Delta Row Delta Row is a compression mode that identifies and transmits only those bytes different from the ones in a preceding row. The control byte consists of two parts: • High 3 bits: Number of bytes to replace +1 (1 to 8). • Low 5 bits: Offset from last unmodified byte (0-30); if - Lexmark 33S0300 | Technical Reference - Page 94
2-82 PCL Adaptive Compression Adaptive compression allows the combined use of compression methods 0 through 3 (Uncoded, Run-Length Encoded, TIFF, and Delta Row). It also allows the printing of empty rows (all zeros) or duplicate rows. • The Transfer Raster Data command size includes all rows (scan - Lexmark 33S0300 | Technical Reference - Page 95
use line endings, the width of the image must be specified using the Raster Width command (ESC*r#S). The compressed image data is sent to the printer using the Transfer Raster Data command (ESC*b#W). The maximum number of bytes that can be sent using the Transfer Raster Data command is 32K bytes - Lexmark 33S0300 | Technical Reference - Page 96
in the Raster Width command (ESC*r#S), the image is clipped at print time. Additional Compression Modes When the compression mode is 1008 (Lexmark Adaptive), TIFF word and doubleword can be printed using compression scan modes 254 and 255 respectively. This compression method sends a raster image - Lexmark 33S0300 | Technical Reference - Page 97
2-85 PCL Macros When creating a macro, first assign it an ID number. If this number is identical to an existing macro ID in RAM, the old macro is deleted when you specify the Macro Control Start Definition. Next, start the macro definition, send the contents of the macro, and stop the macro - Lexmark 33S0300 | Technical Reference - Page 98
Language (PJL) commands, including certain commands that cause the printer to enter PCL emulation, PostScript emulation, and Personal Printer Data Stream (PPDS). To determine which commands your printer supports, see Appendix B: "PJL Support" on page B-1. PJL Command Notation The syntax for each - Lexmark 33S0300 | Technical Reference - Page 99
and allows dynamic switching into PJL. Syntax: %-12345X Notes: • If the printer receives this command while in PCL emulation, it performs a Printer Language Reset (ESCE) before exiting PCL emulation. • If the printer receives this command while in PostScript emulation, it performs an End-of-Job - Lexmark 33S0300 | Technical Reference - Page 100
. COMMENT Command This command lets you add descriptive comments to your PJL job. Syntax: @PJL COMMENT words[] Notes: • When the printer receives this command, it is ignored. • The words parameter can be any combination of printable characters, spaces, and horizontal tabs. • The COMMENT - Lexmark 33S0300 | Technical Reference - Page 101
operator panel display or through MarkVision Professional until an EOJ command is received or until the print timeout expires. Your printer also supports the PASSWORD parameter for the PJL JOB command. JOB Command The host computer can use the JOB command to separate print data into various parts - Lexmark 33S0300 | Technical Reference - Page 102
is from 1 to 2,147,483,647. Omission of the START parameter causes the printer to start printing with page 1 of the job. END = last page Use the range is from 1 to 2,147,483,647. Omission of the END parameter causes the printer to print all pages to the end of the job. PASSWORD = number A system - Lexmark 33S0300 | Technical Reference - Page 103
3-6 PJL For detailed information on PJL password protection, see "File and Device Protection Commands" on page 3-93. Note: Setting a default PJL password disables the use of PJL DEFAULT and INITIALIZE commands. (See "DEFAULT Command" on page 3-8 and "INITIALIZE Command" on page 3-11.) EOJ Command - Lexmark 33S0300 | Technical Reference - Page 104
common to both your printer and the Hewlett-Packard Company's LaserJet printers. Table 3-2: Environment Variable Categories Categories Common Variables for Both Printer Languages Printer Unique Variables for Both Printer Languages Common Variables for PCL emulation Printer Unique Variables for PCL - Lexmark 33S0300 | Technical Reference - Page 105
parameter specifies the type of PJL variables to be modified. The variables supported are listed in the tables beginning on page 3-12. • A [command the tables "Common Variables for PCL Emulation" on page 3-48, and "Printer Unique Variables for PCL Emulation" on page 3-49.) • LPARM:POSTSCRIPT is - Lexmark 33S0300 | Technical Reference - Page 106
any currently defined environment variable that cannot be set using the desired printer language. For example, use the PJL SET command to set Print ] parameter specifies the type of PJL variables to be modified. The variables supported are listed in the tables beginning on page 3-12. • A [command - Lexmark 33S0300 | Technical Reference - Page 107
.filetype" is required for LRESOURCE variables. (See "Table 3-9: Printer Unique LRESOURCE Variables" on page 3-53.) Values for "device:filename 3-87 for a complete list of the supported file types. The filetype is case sensitive. variable=value The supported variables and values are listed in the - Lexmark 33S0300 | Technical Reference - Page 108
" on page 3-53. Syntax: @PJL INITIALIZE[] RESET Command This command resets the current environment variables to the settings stored in the printer NVRAM. Therefore, any variables modified by the PJL SET command are returned to their default value after execution of the PJL RESET command - Lexmark 33S0300 | Technical Reference - Page 109
Languages Note: The word common applies to those variables common to both your printer and the Hewlett-Packard Company's LaserJet printers. The following common variables are supported for both PCL emulation and PostScript emulation, unless otherwise noted. Therefore, the [command modifier:value - Lexmark 33S0300 | Technical Reference - Page 110
HOLD (SET only) HOLDKEY (SET only) To determine the default value of your printer, see "Table B-1: Common Variables for Both Printer Languages" on page B-1. Duplex ON, OFF OFF Toner Saver ON, OFF OFF Unique printer identifier The value of the NVRAM serial number field is returned. Set by - Lexmark 33S0300 | Technical Reference - Page 111
3-14 PJL Table 3-3: Common Variables for Both Printer Languages (Continued) Variable HOLDTYPE (SET only) IMAGEADAPT (DEFAULT only) INTRAY2 INTRAY3 INTRAY4 INTRAY5 INTRAY1SIZE (SET only) INTRAY2SIZE (SET only) INTRAY3SIZE (SET only) INTRAY4SIZE (SET only) - Lexmark 33S0300 | Technical Reference - Page 112
Table 3-3: Common Variables for Both Printer Languages (Continued) Variable JOBOFFSET LANG (DEFAULT only) LOWTONER (DEFAULT only) MANUALFEED (READ only) MEDIATYPE MPTRAY (DEFAULT only) ORIENTATION Function Offset Pages Default display language Toner Alarm Manual feed selection Default paper source - Lexmark 33S0300 | Technical Reference - Page 113
3-16 PJL Table 3-3: Common Variables for Both Printer Languages (Continued) Variable OUTBIN Function Output Bin Selections UPPER, LOWER, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, OPTIONALOUTBIN6, OPTIONALOUTBIN7, OPTIONALOUTBIN8, OPTIONALOUTBIN9, - Lexmark 33S0300 | Technical Reference - Page 114
, SLOW is returned. • If Parallel Protocol is set as Fastbytes, FAST is returned. 0 to 65535 0 Locks the printer operator panel to keep the user defaults from changing. See your printer documentation for more information. The Default PJL password is 0. If the PJL password is not equal to - Lexmark 33S0300 | Technical Reference - Page 115
SET or DEFAULT command, the value is changed to 120 or 240 based on the printer model. 0 to 999 0 Used to request the number of collated copies of a print On. OFF indicates PQET is Off. 0 to 255 90 The time the printer remains idle before the job is forced to print. Note: If a value greater - Lexmark 33S0300 | Technical Reference - Page 116
) NO Printer Unique Variables for Both Printer Languages The following variables are unique to some Lexmark printers and are supported for both Alarm Control Selections MANUAL, AUTOMATIC ON, OFF ON enables parallel bidirectional support. OFF disables parallel bidirectional support. OFF, SINGLE - Lexmark 33S0300 | Technical Reference - Page 117
3-20 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LBONDOUTBIN (DEFAULT only) Function Selections Factory Default Assign Type/Bin - Bond UPPER, LOWER, DISABLED, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, - Lexmark 33S0300 | Technical Reference - Page 118
If collation is set to OFF, uncollated output prints pages 1, 1, 2, 2, 3, 3. Indicates which color target the printer emulates NONE, DISPLAY, SWOP, OFF, AUTO, VIVID, DUOTONE, MANUAL See "Table B-2: Printer Unique PJL Variables for Both Printer Languages" on page B-4 for the default value of your - Lexmark 33S0300 | Technical Reference - Page 119
3-22 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCOLOREDLOADING (DEFAULT only) LCOLOREDOUTBIN (DEFAULT only) Function Colored Paper Loading Selections OFF, DUPLEX Factory Default OFF Assign Type/Bin Colored Paper UPPER, - Lexmark 33S0300 | Technical Reference - Page 120
3-23 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMPAPERHEIGHT LCUSTOMPAPERFEED LCUSTOMTYPE1LENGTH (DEFAULT only) LCUSTOMTYPE1LOADING (DEFAULT only) LCUSTOMTYPE1MEDIA (DEFAULT only) LCUSTOMTYPE1NAME (DEFAULT only) Function Universal Height - Lexmark 33S0300 | Technical Reference - Page 121
3-24 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE1OUTBIN (DEFAULT only) Function Assign Type/Bin Custom Type 1 Selections Factory Default UPPER, LOWER, DISABLED, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, - Lexmark 33S0300 | Technical Reference - Page 122
3-25 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE2NAME (DEFAULT only) LCUSTOMTYPE2OUTBIN (DEFAULT only) Function Custom Type 2 Name Assign Type/Bin Custom Type 2 Selections Factory Default "name" CUSTOMTYPE2 name is a - Lexmark 33S0300 | Technical Reference - Page 123
3-26 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE3MEDIA (DEFAULT only) LCUSTOMTYPE3NAME (DEFAULT only) LCUSTOMTYPE3OUTBIN (DEFAULT only) Function Custom Type 3 Media Custom Type 3 Name Assign Type/Bin Custom Type 3 Selections - Lexmark 33S0300 | Technical Reference - Page 124
3-27 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE4LOADING (DEFAULT only) LCUSTOMTYPE4MEDIA (DEFAULT only) LCUSTOMTYPE4NAME (DEFAULT only) LCUSTOMTYPE4OUTBIN (DEFAULT only) Function Custom Type 4 Paper Loading Selections OFF, DUPLEX Factory - Lexmark 33S0300 | Technical Reference - Page 125
3-28 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE5LENGTH (DEFAULT only) LCUSTOMTYPE5LOADING (DEFAULT only) LCUSTOMTYPE5MEDIA (DEFAULT only) LCUSTOMTYPE5NAME (DEFAULT only) LCUSTOMTYPE5OUTBIN (DEFAULT only) Function Custom Type 5 Length - Lexmark 33S0300 | Technical Reference - Page 126
3-29 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE5WEIGHT (DEFAULT only) LCUSTOMTYPE6LENGTH (DEFAULT only) LCUSTOMTYPE6LOADING (DEFAULT only) LCUSTOMTYPE6MEDIA (DEFAULT only) LCUSTOMTYPE6NAME (DEFAULT only) LCUSTOMTYPE6OUTBIN (DEFAULT only) - Lexmark 33S0300 | Technical Reference - Page 127
3-30 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LCUSTOMTYPE6TEXTURE (DEFAULT only) LCUSTOMTYPE6WEIGHT (DEFAULT only) LDOWNLOADTARGET (SET only) LDRYTIMEDELAY LDUPLICATEHELDJOBS LENVELOPEENHANCE (DEFAULT only) LENVELOPELENGTH (DEFAULT only) - Lexmark 33S0300 | Technical Reference - Page 128
3-31 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LENVELOPETEXTURE (DEFAULT only) LENVELOPEWEIGHT (DEFAULT only) LESCCHAR (READ only) (Port specific) LFAXRESOLUTION (SET only) LFAXREDIAL (SET only) LFAXREDIALFREQUENCY (SET only) LFAXTRANSMISSIONLOG (SET - Lexmark 33S0300 | Technical Reference - Page 129
3-32 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LGLOSSYOUTPUTBIN Function Selections Factory Default Assign Type/Bin - Glossy UPPER, LOWER, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, OPTIONALOUTBIN6, - Lexmark 33S0300 | Technical Reference - Page 130
size, default formatting size COM10, COM9, MONARCH, DL, C5, B5, OTHERENVELOPE COM10, DL (Country specific) Ink Alert ON, OFF OFF Displays a printer attendance message when an ink cartridge is low. Multipurpose feeder installed size, default formatting size Paper: A3, A3+, A4, A5, JISB4 - Lexmark 33S0300 | Technical Reference - Page 131
3-34 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LLABELSOUTBIN (DEFAULT only) Function Assign Type/Bin Labels Selections Factory Default UPPER, LOWER, DISABLED, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, OPTIONALOUTBIN5, - Lexmark 33S0300 | Technical Reference - Page 132
3-35 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LLETTERHEADOUTBIN (DEFAULT only) LMANUALCOLORCMYKTEXT Letterhead Texture Letterhead Weight Manual Color RGB Text Manual Color RGB Graphics Manual Color RGB Image Manual Color CMYK Text Standard Bin - Lexmark 33S0300 | Technical Reference - Page 133
36 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LMANUALCOLORCMYKIMAGE LMANUALENVELOPESIZE LMANUALENVELOPETYPE LMANUALPAPERSIZE LMANUALPAPERTYPE LMPFEEDERPAPERTYPE LMULTIPAGEBORDER LMULTIPAGEORDER Function Manual Color CMYK Image Manual Envelope, default - Lexmark 33S0300 | Technical Reference - Page 134
3-37 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LMULTIPAGEPRINT LMULTIPAGEVIEW LNPAP (READ only) (Port specific) LOPTIONALOUTBIN1NAME (DEFAULT only) LOPTIONALOUTBIN2NAME (DEFAULT only) LOPTIONALOUTBIN3NAME (DEFAULT only) LOPTIONALOUTBIN4NAME (DEFAULT - Lexmark 33S0300 | Technical Reference - Page 135
3-38 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable Function Selections Factory Default LOPTIONALOUTBIN6NAME (DEFAULT only) Optional Output Bin 6 Name "name" name is a variable that allows for custom naming of optional - Lexmark 33S0300 | Technical Reference - Page 136
, MANUALPAPER, MANUALENVELOPE (Model specific) Note: If any optional source is specified, but it is not installed, the default paper source is not changed. See "Table B-2: Printer Unique PJL Variables for Both Printer Languages" on page B-4 for the default value of your - Lexmark 33S0300 | Technical Reference - Page 137
3-40 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LPICTUREGRADE™ LPLAINLENGTH (DEFAULT only) LPLAINOUTBIN (DEFAULT only to the closest value within the possible value range. Some printer models released in the year 2000 or later designated as Energy Star - Lexmark 33S0300 | Technical Reference - Page 138
settings in NVRAM are changed when PPDS is activated: • PCL and PS SmartSwitch settings for each port are turned off. • Printer Language is set to PPDS. Lines Per Page 1 to 255 (PPDS) 64, 68 (Country specific) Lines Per Inch Preprinted Paper Length 0.25 to 30.00 - Lexmark 33S0300 | Technical Reference - Page 139
is selected, Print Buffer displays with the Waiting message. If OFF is selected, Print Buffer does not display with the Waiting message. 0 to 15 seconds 0 Printer Usage MAXSPEED, MAXYIELD Disable Print Menus from front panel ON, OFF MAXSPEED, MAXYIELD (Model specific) ON - Lexmark 33S0300 | Technical Reference - Page 140
a custom name. Print and Hold Repeat Print Job Limit 0 to 50 jobs 5 Specifies the number of Repeat Print jobs that can be held in printer memory. If the Repeat Print Job Limit setting is not equal to 0, a DINQUIRE or INQUIRE returns the numerical setting for LREPEATPRINTLIMIT. If Repeat Print - Lexmark 33S0300 | Technical Reference - Page 141
3-44 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LSTANDARDOUTBINNAME (DEFAULT only) LSTROKEWIDTH LSTAPLE LSTAPLESEMPTYALARM (DEFAULT only) LSTAPLETESTBIN (DEFAULT only) LSTAPLETESTSOURCE (DEFAULT only) LSUBSTITUTESIZE LTOPBINROTATE (DEFAULT only) - Lexmark 33S0300 | Technical Reference - Page 142
3-45 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LTRANSPARENCYOUTBIN (DEFAULT only) Function Assign Type/Bin Transparency Selections Factory Default UPPER, LOWER, DISABLED, OPTIONALOUTBIN1, OPTIONALOUTBIN2, OPTIONALOUTBIN3, OPTIONALOUTBIN4, - Lexmark 33S0300 | Technical Reference - Page 143
3-46 PJL Table 3-4: Printer Unique Variables for Both Printer Languages (Continued) Variable LTRAY3SENSEDTYPE PAPER LTRAY3SENSEDTYPE TRANSPARENCY LTRAY4SENSEDTYPE PAPER LTRAY4SENSEDTYPE TRANSPARENCY LTRAY1AUTOSIZE (DEFAULT only) LTRAY2AUTOSIZE (DEFAULT only) LTRAY3AUTOSIZE (DEFAULT only) - Lexmark 33S0300 | Technical Reference - Page 144
) name is a text string that is truncated to 24 characters. See "Table B-2: Printer Unique PJL Variables for Both Printer Languages" on page B-4 for the default value for your printer. LTRAY3PAPERTYPE LTRAY4PAPERTYPE LTRAY5PAPERTYPE LTRAY1RENUMBER Tray 3 Paper Type Tray 4 Paper Type Tray 5 Paper - Lexmark 33S0300 | Technical Reference - Page 145
parameter should be specified as LPARM:PCL. For example: @PJL SET LPARM:PCL FONTSOURCE=I To determine which variables your printer supports, see "Table B-3: Common Variables for PCL Emulation" on page B-11. Table 3-5: Common Variables for PCL Emulation Variable FONTNUMBER FONTSOURCE PITCH - Lexmark 33S0300 | Technical Reference - Page 146
your printer supports, see "Table B-4: Printer Unique Variables for PCL Emulation" on page B-12. Table 3-6: Printer NONE Variable used with PJL INQUIRE or DINQUIRE command. LASSIGNMANUALENVELOPE Tray Renumber Assign Manual Envelope OFF, 0 to 199 Variable used with PJL SET or DEFAULT command - Lexmark 33S0300 | Technical Reference - Page 147
Variable used with PJL INQUIRE or DINQUIRE command. ON, OFF ON Some printers handle partial pel character escapement rounding of bitmap fonts differently. LBITMAPROUNDING offers a way of instructing the printer how to handle partial pel rounding of bitmap fonts. Bitmap rounding is compatible - Lexmark 33S0300 | Technical Reference - Page 148
be specified as LPARM:POSTSCRIPT. For example: @PJL SET LPARM:POSTSCRIPT JAMRECOVERY=OFF[] To determine which variables your printer supports, see "Table B-5: Common Variables for PostScript Emulation" on page B-13. Table 3-7: Common Variables for PostScript Emulation Variable JAMRECOVERY - Lexmark 33S0300 | Technical Reference - Page 149
example: @PJL SET LPARM:POSTSCRIPT LPICTUREGRADE=ON[] To determine which variables your printer supports, see Table B-6 on page B-13. Table 3-8: Printer Unique Variables for PostScript Emulation Variable LPICTUREGRADE™ LPSFONTPRIORITY Function PictureGradeTM Font Priority Selections ON - Lexmark 33S0300 | Technical Reference - Page 150
3-53 PJL To determine which variables your printer supports, see "Table B-7: Printer Unique LRESOURCE Variables" on page B-14. Table 3-9: Printer Unique LRESOURCE Variables Variable Function Selections Factory Default LDESCRIPTION (DEFAULT only) Macro or Symbol Set Description 1 " - Lexmark 33S0300 | Technical Reference - Page 151
Readback commands. In addition, the printer can also be instructed to send unsolicited status information back to the host computer when asynchronous events occur, such as a memory error or a paper jam. To determine which commands your printer supports, see "Table B-8: Status Readback Commands - Lexmark 33S0300 | Technical Reference - Page 152
variable=value The supported variables are listed in the tables beginning on page 3-12. This printer returns a ? for inquiries of an unsupported variable, or inquiries of a variable associated with an option that is not installed. ECHO Command The ECHO command instructs the printer to return the - Lexmark 33S0300 | Technical Reference - Page 153
. INFO Command The INFO command is used to query status information from the printer. "Table 3-10: INFO Category Parameter Values" on page 3-56 lists the or tabs] category Table 3-10 lists the supported categories. Table 3-10: INFO Category Parameter Values Category Values ID CONFIG - Lexmark 33S0300 | Technical Reference - Page 154
3-57 INFO CONFIG Response Syntax (An Example): @PJL INFO CONFIG IN TRAYS [2 ENUMERATED] INTRAY1 INTRAY2 MANUAL FEED OUT TRAYS [1 ENUMERATED] UPPER FACEDOWN PAPERS [13 ENUMERATED] LETTER LEGAL A4< - Lexmark 33S0300 | Technical Reference - Page 155
value] parameter specifies the type of PJL variables to be queried. The variables supported are listed in the tables beginning on page 3-12. • A [command the tables "Common Variables for PCL Emulation" on page 3-48, and "Printer Unique Variables for PCL Emulation" on page 3-49.) • LPARM:POSTSCRIPT - Lexmark 33S0300 | Technical Reference - Page 156
ustatus variable [one or more lines of printable characters, spaces, or tabs] To determine which variables your printer supports, see "Table B-9: USTATUS Unsolicited Status Variables" on page B-15. See "Status Message Format" on page 3-61 for additional information about the - Lexmark 33S0300 | Technical Reference - Page 157
PJL ustatus variable=value The following values are supported for the ustatus variable=value parameter. Table unsolicited status for job changes. ON Enables unsolicited status for page changes. The printer sends a status message when a printed sheet reaches the standard output bin. OFF - Lexmark 33S0300 | Technical Reference - Page 158
88 Ink Low TRUE Not Ready 10002 Not Ready FALSE In the Menus 10002 Not Ready FALSE Printer reset 10005 Resetting the Printer FALSE Ready with Toner Low 10006 88 Toner Low TRUE Ready with Toner Low 10006 88 Yellow Toner Low TRUE Ready with Toner Low 10006 88 Magenta Toner Low - Lexmark 33S0300 | Technical Reference - Page 159
3-62 PJL Table 3-12: PJL Information Messages Printer State Status Code Display String Online Status Ready with Replace Transfer 10006 Replace Transfer TRUE Power Saver with Ink Low 10006 88 Ink Low TRUE Power Saver mode with Toner Low 10006 88 Toner Low TRUE Power Saver mode with - Lexmark 33S0300 | Technical Reference - Page 160
are returned in this form: CODE=status code DISPLAY=display string (in double quotes) ONLINE=online status To determine which messages your printer supports, see "Table B-10: PJL Messages for Auto-Continuable Conditions" on page B-15. Table 3-13: PJL Messages for Auto-Continuable Conditions - Lexmark 33S0300 | Technical Reference - Page 161
: PJL Messages for Auto-Continuable Conditions (Continued) Printer State Status Code Display String Online Status Intervention required Disk? or Print Jobs on Disk. Go/Stop? FALSE Intervention required: 30031 printer powered off, disk installed with Print and Hold jobs on the disk Restore - Lexmark 33S0300 | Technical Reference - Page 162
3-13: PJL Messages for Auto-Continuable Conditions (Continued) Printer State Status Code Display String Online Status Intervention required: Insert Box M FALSE Intervention required: staple cartridge missing 30107 Insert Staple Cartridge FALSE Intervention required: insert stapler 30107 - Lexmark 33S0300 | Technical Reference - Page 163
3-66 PJL Table 3-13: PJL Messages for Auto-Continuable Conditions (Continued) Printer State Status Code Display String Online Status Intervention required: flash full 32002 52 Flash Full FALSE Intervention required: disk full 32002 62 Disk Full FALSE - Lexmark 33S0300 | Technical Reference - Page 164
which messages your printer supports, see " printer upper door open 40021 Cover Open or Close Top Covers or Insert Cartridge or Close Door FALSE Intervention required: close toner box cover 40021 Close Cover A FALSE Intervention required: defective print cartridge or defective ink cartridge - Lexmark 33S0300 | Technical Reference - Page 165
message, the values for XXXX are returned to indicate which ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer. Note: The Display String is returned in the current - Lexmark 33S0300 | Technical Reference - Page 166
message, the values for XXXX are returned to indicate which ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer. Note: The Display String is returned in the current - Lexmark 33S0300 | Technical Reference - Page 167
message, the values for XXXX are returned to indicate which ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer. Note: The Display String is returned in the current - Lexmark 33S0300 | Technical Reference - Page 168
message, the values for XXXX are returned to indicate which ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer. Note: The Display String is returned in the current - Lexmark 33S0300 | Technical Reference - Page 169
ink cartridges are defective. 2 represents a one-letter designator for each door labeled on the printer. 3 represents a one-letter designator for each cover labeled on the printer a Load , Load Manual, or Change message appears on the printer operator panel display or through - Lexmark 33S0300 | Technical Reference - Page 170
3-73 PJL To determine which messages your printer supports, see "Table B-12: PJL Messages for Paper Handling" on page B-25. Table 3-15: PJL Messages for Paper Handling Printer State Status Code Display String* Online Status Intervention required: wrong paper size in tray x 30034 34 Wrong - Lexmark 33S0300 | Technical Reference - Page 171
3-74 PJL Table 3-16: Tray Values X Value 0 1 2 3 4 5 6 7 Tray Multipurpose Feeder Manual Feed Tray 1 Tray 2 Envelope Feeder Tray 3 Tray 4 Tray 5 Table 3-17: Media Size Values YY Value 00 01 02 03 04 05 06 07 08 09 - Lexmark 33S0300 | Technical Reference - Page 172
Bin 1 Bin 2 Bin 3 Bin 4 Bin 5 Bin 6 Bin 7 Bin 8 Bin 9 Bin 10 Operator Intervention - Paper Jams When a Paper Jam message appears on the printer operator panel display or through MarkVision Professional, a message is returned to the host computer indicating the type and location for the prompt - Lexmark 33S0300 | Technical Reference - Page 173
3-76 PJL To determine which messages your printer supports, see Table B-13 on page B-27. Table 3-19: PJL Messages for Paper Jams Printer State Status Code Display String* Online Status Intervention required: paper jam 4200x 200 Paper Jam FALSE Intervention required: paper jam 4201x 201 - Lexmark 33S0300 | Technical Reference - Page 174
3-77 PJL Table 3-19: PJL Messages for Paper Jams (Continued) Printer State Status Code Display String* Online Status Intervention required: paper jam 4232x 232 Paper Jam FALSE Intervention required: paper jam 4233x 233 Paper Jam FALSE - Lexmark 33S0300 | Technical Reference - Page 175
3-78 PJL Table 3-19: PJL Messages for Paper Jams (Continued) Printer State Status Code Display String* Online Status Intervention required: paper jam 4253w 253 Paper Jam FALSE Intervention required: paper jam 4254wy 254 Paper Jam FALSE - Lexmark 33S0300 | Technical Reference - Page 176
3-79 PJL Table 3-19: PJL Messages for Paper Jams (Continued) Printer State Status Code Display String* Online Status Intervention required: paper jam 4281w 281 Paper Jam FALSE Intervention required: paper jam 4281x 281 Paper Jam FALSE - Lexmark 33S0300 | Technical Reference - Page 177
documentation for more information on printer messages. Service Errors Error Code 50000 is returned for all 9xx Service Errors when the printer can return a status code. To determine whether your printer supports returning service messages, see "Table B-14: Service Errors" on page B-32. Device - Lexmark 33S0300 | Technical Reference - Page 178
DISPLAY = "message"[] OPMSG Command When an OPMSG command is received, the message appears and is allotted both lines of the display. The printer is taken OFFLINE. This message, along with the STMSG command, is the lowest priority, so if another intervention occurs, it displays instead. Note - Lexmark 33S0300 | Technical Reference - Page 179
PJL Commands To determine which commands your printer supports, see "Table B-16: Lexmark Unique PJL Commands" on page B-32. LBEEP Command This command causes the printer to beep three times. Syntax: @PJL LBEEP[] LPORTROTATE Command This command causes the printer to rotate ports at the next - Lexmark 33S0300 | Technical Reference - Page 180
one of the internal information pages. @PJL testpage[] The supported testpage values are listed in the following table. Table 3-20: escape character. For example, at the factory, the printer uses 0x1B (character ) for the escape character. If CHAR = 65 is specified with this command - Lexmark 33S0300 | Technical Reference - Page 181
3-84 PJL PORT parameter The following ports are valid parameters for LESCAPECHAR: • INA • INA1 • INA2 • INA3 • LOCALTALK1 • LOCALTALK2 • LOCALTALK3 • PARALLEL • PARALLEL1 • PARALLEL2 • PARALLEL 3 • USB • USB1 • USB2 • USB3 • SERIAL • SERIAL1 • SERIAL2 • SERIAL3 • IR • IR1 • IR2 • IR3 - Lexmark 33S0300 | Technical Reference - Page 182
the fax processing device if one of the following occurs: • The printer is not configured for fax send capability • The command is received with a command that selects an interpreter that does not support formatting functionality for sending faxes Syntax: @PJL LFAX PHONENUMBER="number" [STATIONID - Lexmark 33S0300 | Technical Reference - Page 183
3-86 PJL LDOWNLOADTARGET Command This command specifies which device is the target for downloaded files. The target can be RAM, flash, or disk. Syntax: @PJL SET LDOWNLOADTARGET=variable [] File Commands for Flash or Disk Use the following commands to manage resources on flash and disk - Lexmark 33S0300 | Technical Reference - Page 184
3-87 PJL Table 3-22 lists the parameters used with most of the commands. Additional parameters are noted in the description of each command. Table 3-22: Variables for Flash and Disk File and Password Commands Parameter accesstype bytecount Syntax ACCESS = accesstype LENGTH = bytecount - Lexmark 33S0300 | Technical Reference - Page 185
3-88 PJL Table 3-22: Variables for Flash and Disk File and Password Commands (Continued) Parameter Syntax Description filedevice DEVICE = filedevice File storage media. Case insensitive. flash flash1 disk disk1 rom The rom value is used for the LRUNFILE command only. Note: The command is - Lexmark 33S0300 | Technical Reference - Page 186
3-89 PJL Table 3-22: Variables for Flash and Disk File and Password Commands (Continued) Parameter location Syntax START = location Description The location in the file to begin writing or reading. Use an integer that represents an offset in bytes from the beginning of the file. Optional for - Lexmark 33S0300 | Technical Reference - Page 187
3-90 PJL LREADFILE Command Use this command to read data from a file on a storage device. Syntax: @PJL LREADFILE DEVICE = filedevice FILENAME = "fname" [START = location] [LENGTH = bytecount][] Response Syntax: @PJL LREADFILE DEVICE = filedevice FILENAME = "fname" START = location LENGTH = - Lexmark 33S0300 | Technical Reference - Page 188
3-91 PJL LWRITEFILE Command Use this command to write data to a file on a storage device. Syntax: @PJL LWRITEFILE DEVICE = filedevice FILENAME = "fname" [START = location] [LENGTH = bytecount][] [@PJL END DATA][] Notes: • The file must be closed using the LCLOSEFILE command - Lexmark 33S0300 | Technical Reference - Page 189
3-92 PJL LRENAMEFILE Command Use this command to rename a file on a storage device. The command is ignored if the filename specified as OLDFILENAME doesn't exist on the device, or if the filename specified as NEWFILENAME already exists on the device. Syntax: @PJL LRENAMEFILE DEVICE = filedevice - Lexmark 33S0300 | Technical Reference - Page 190
3-93 PJL File and Device Protection Commands The following information applies to password protection. • You can set both read/write and write passwords for a resource. If both passwords are set, the read/write password has precedence over the write password. • If you attempt to password-protect a - Lexmark 33S0300 | Technical Reference - Page 191
saved to flash with an ID of 1023: @PJL DEFAULT LRESOURCE:"flash:1023.p5macro" LRWLOCK="password"[] Note: If the filename is incorrect, the printer applies the password to the entire device. Password for an Entire Device If you want to set a password on a device, not just a single file, omit - Lexmark 33S0300 | Technical Reference - Page 192
PCL symbol sets. See the table beginning on page 3-87 for a complete list of the supported file types. The filetype is case sensitive. LRWLOCK = "password" or LWLOCK = "password" See "Printer Unique LRESOURCE Variables" on page 3-52 for information about values for LRWLOCK = "password" and LWLOCK - Lexmark 33S0300 | Technical Reference - Page 193
file, such as p5macro for PCL macros or p5symset for PCL symbol sets. See the table beginning on page 3-87 for a complete list of the supported filetypes. The filetype is case sensitive. - Lexmark 33S0300 | Technical Reference - Page 194
symbol sets. See the table beginning on page 3-87 for a complete list of the supported file types. The filetype is case sensitive. LRWLOCK = "password" or LWLOCK = "password" Parameters See "Printer Unique LRESOURCE Variables" on page 3-52 for information about values for LRWLOCK = "password" and - Lexmark 33S0300 | Technical Reference - Page 195
Settings Page. The value of the "seed" determines the key. 2 Obtain the key from the Lexmark Customer Support Center. You must have the "seed" value. 3 Send the @PJL LBYPASSPASSWORD command to the printer by any port. If the correct key is specified, a modified version of the directory is produced - Lexmark 33S0300 | Technical Reference - Page 196
in detail. For more information, refer to the PostScript Language Reference Manual (Third Edition) by Adobe Systems, Inc. To determine which commands your printer supports, see Appendix C: "PostScript Support" on page C-1. Selecting PostScript Emulation Using SmartSwitch When SmartSwitch is enabled - Lexmark 33S0300 | Technical Reference - Page 197
stored in flash memory or on disk. Table 4-1: Paper Sizes Supported ✓ Supported ✘ Not Supported Paper Sizes Printer Models E120, and E120n E238, E240, E240n, E340, and paper sizes. 2 The Lexmark E250d, E250dn, E350d, E352dn, and E450dn do not support Statement with duplex. The 550-sheet tray - Lexmark 33S0300 | Technical Reference - Page 198
4-3 PostScript Table 4-1: Paper Sizes Supported (Continued) ✓ Supported ✘ Not Supported Paper Sizes Printer Models E120, and E120n E238, E240, E240n, E340, and 2 The Lexmark E250d, E250dn, E350d, E352dn, and E450dn do not support Statement with duplex. The 550-sheet tray support statement. - Lexmark 33S0300 | Technical Reference - Page 199
an envelope 2 treat the page size as paper Error: stackoverflow setignoresize integer setignoresize - overrides the automatic page orientation selected by the printer to support custom media sizes. This operator determines whether or not to adjust the text based on the page size. integer value may - Lexmark 33S0300 | Technical Reference - Page 200
Error: rangecheck, stackunderflow, typecheck Paper Tray Support When the printer receives one of the operators listed in " printer sends a message to load the requested size in the manual feed tray or multipurpose feeder. • The PageSize Policy is set to 0 by means of setpagedevice. • The printer - Lexmark 33S0300 | Technical Reference - Page 201
5 • If the requested size cannot be located in any automatic source, a configurationerror is issued and the job is flushed. For printers that support automatic duplexing: • Automatic duplexing is not supported for custom-size paper or for envelopes in the multipurpose feeder. Automatic duplexing is - Lexmark 33S0300 | Technical Reference - Page 202
E120n E238, E240, E240n, E340, and E342n E250d, E250dn, E350d, E352dn, and E450dn Table 4-2: Tray Selected with Tray Operators ✓ Supported ✘ Not Supported Printer Models Operator Tray Selected (Corresponding image size is set) a3tray tray with A3-size paper ✓ ✘ ✓ a4tray tray with A4-size - Lexmark 33S0300 | Technical Reference - Page 203
. If the value of the manualfeed operator or the ManualFeed page device parameter is true when showpage or copypage is executed, the page is fed manually. If both have a value of false when showpage or copypage is executed, the page is fed from an automatic source. These two values are independent - Lexmark 33S0300 | Technical Reference - Page 204
: • If the Manual Paper or Manual Envelope source is selected, the ManualFeed page device parameter is set to true. • A rangecheck error is returned if a paper source that is not installed is selected. • If a setpapertray operator is issued for the back of a duplexed page, the printer ejects a blank - Lexmark 33S0300 | Technical Reference - Page 205
example uses a 3.875 x 7.5 envelope. >>setpagedevice Table 4-3: Envelope Sizes Supported ✓ Supported ✘ Not Supported Envelope Sizes Printer Models Literal Name Size (mm) Size Size (inches) (points) 3.875x7.5envelope 98.4 x 190.5 3.875 - Lexmark 33S0300 | Technical Reference - Page 206
4-11 PostScript The literal names in Table 4-4 are supported as PostScript emulation compatible operators. Table 4-4: Literal Names Supported ✓ Supported ✘ Not Supported Literal Names Printer Models E120 and E120n E238, E240, E240n, E340, and E342n E250d, E250dn, E350d, E352dn, and E450dn - Lexmark 33S0300 | Technical Reference - Page 207
print job is flushed. If manualfeed or ManualFeed is true, the printer prompts you to load the requested size manually. If no manual feed exists on the printer, a rangecheck error message is generated. The envelope tray the printer selects when it receives an envelopetray operator is listed in Table - Lexmark 33S0300 | Technical Reference - Page 208
E250d, E250dn, E240n, E340, and E450dn E250d, E250dn, E350d, E352dn, and E450dn Table 4-5: Envelopetray Operator Selections ✓ Supported ✘ Not Supported Tray Operators Printer Models Operator Tray Selected (Corresponding image size is set) 110x220envelopetray tray with 110 x 220 size envelopes - Lexmark 33S0300 | Technical Reference - Page 209
4-14 PostScript Supplemental Operator Summary To determine which operators your printer supports, see Table C-1 on page C-1. appletalktype - appletalktype (string) in statusdict, this string reflects the current value of the LocalTalkType device parameter from the %LocalTalk% device. The - Lexmark 33S0300 | Technical Reference - Page 210
the SystemParamsPassword system parameter and the StartJobPassword system parameter stored in the printer. If the integer form is used, the integer is converted into the manual duplex mode. An integer is returned on the stack: 0 current job manual duplex mode is no manual duplex 1 current job manual - Lexmark 33S0300 | Technical Reference - Page 211
...65535 seconds • ManualFeedTimeout page device parameter 0 disabled 1...65535 seconds (default is device dependent) To find the default for your printer, see Table C-2 on page C-4. • WaitTimeout system parameter 0 disabled 15...65535 seconds (default is 40 seconds) Error: stackoverflow deletefile - Lexmark 33S0300 | Technical Reference - Page 212
4-17 PostScript devcontrol string integer devcontrol boolean allows a host computer utility to manage resources on the flash or disk. It requires a string device name parameter, an integer command name parameter, and two command argument parameters. The device control operator performs a - Lexmark 33S0300 | Technical Reference - Page 213
4-18 PostScript Table 4-7: Unsuccessful devcontrol Parameter Error Codes Code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Meaning File system access has not been initialized Could not allocate file descriptor Some invalid argument was passed No such device Invalid access to file - Lexmark 33S0300 | Technical Reference - Page 214
4-19 PostScript devforall proc scratchstring devforall - executes the specified proc procedure for each storage device after pushing a substring on the stack that is the portion of the scratch string containing the device name. This operator is in systemdict. Errors: invalidaccess, rangecheck, - Lexmark 33S0300 | Technical Reference - Page 215
the device can be written to. This value is the same as the Writeable device parameter from the specified IODevice. hasnames true, if the device supports named files. This value is the same as the HasNames device parameter from the specified IODevice. - Lexmark 33S0300 | Technical Reference - Page 216
4-21 PostScript mounted true, if the device is mounted. This value is the same as the Mounted device parameter from the specified IODevice. removable true, if the device is removable and must be mounted before it is referenced. This value is the same as the Removable device parameter from the - Lexmark 33S0300 | Technical Reference - Page 217
4-22 PostScript diskstatus - diskstatus free logicalsize returns on the stack the following two integers: • Number of pages that are free on the optional disk. The value of the Free device parameter from the %disk1% IODevice. • Total number of pages (1024 bytes) that are on the optional disk. The - Lexmark 33S0300 | Technical Reference - Page 218
setting for the current print job. An integer value is returned on the stack: 0 Off 1 On Note: For printers that do not support PQET, doret returns a 0. This operator is equivalent to executing the following PostScript emulation sequence: currentpagedevice /PostRenderingEnhanceDetails get /REValue - Lexmark 33S0300 | Technical Reference - Page 219
if a duplex unit is installed. A boolean value is returned on the stack: true duplex unit is installed false duplex unit is not installed Note: For printers that do not support duplexing, this value is always false. Error: stackoverflow - Lexmark 33S0300 | Technical Reference - Page 220
value for the Duplex page device parameter. true printing mode is duplex false printing mode is simplex Note: For printers that do not support duplexing, this value is always false. This operator is equivalent to executing the following PostScript emulation sequence: currentpagedevice /Duplex - Lexmark 33S0300 | Technical Reference - Page 221
4-26 PostScript file filename access file file creates a file object with specified filename and access. The access values are: r open the file for reading only w create a file if one does not already exist, or truncate and overwrite it if it does exist. File is opened for writing only. a create a - Lexmark 33S0300 | Technical Reference - Page 222
integer value is returned on the stack: 1 Parallel Fastbytes Off (Standard) 2 Parallel Fastbytes On (Fastbytes) Error: stackoverflow idlefonts - idlefonts mark supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. It is parsed and returns a mark on the stack. Error: stackoverflow - Lexmark 33S0300 | Technical Reference - Page 223
4-28 PostScript ignoresize See page 4-4. initializedisk pages action initializedisk - initializes the disk with the page count and action as integer arguments. The arguments set the (%disk1%) IO device parameters as follows: • LogicalSize parameter is set to pages. • If a value of 0 is set as - Lexmark 33S0300 | Technical Reference - Page 224
4-29 PostScript jobsource - jobsource (string) indicates the current value of the CurInputDevice system parameter. A string is returned on the stack indicating the job source. Valid values are: %LocalTalk% %SerialA% %SerialB% %SerialC% %SerialD% %ParallelA% %ParallelB% %ParallelC% %ParallelD% % - Lexmark 33S0300 | Technical Reference - Page 225
4-30 PostScript %LPR_B% %LPR_C% %LPR_D% %UnknownDevice% This operator is equivalent to executing the following PostScript emulation sequence: currentsystemparams /CurInputDevice get Error: stackoverflow jobtimeout - jobtimeout integer queries the current user default setting for the JobTimeout - Lexmark 33S0300 | Technical Reference - Page 226
4-31 PostScript manualfeedtimeout /manualfeedtimeout integer def is an integer key in statusdict that works with the ManualFeedTimeout page device parameter to determine the manualfeed timeout for a given page. If during a print job, manualfeedtimeout is defined as an integer value in statusdict, - Lexmark 33S0300 | Technical Reference - Page 227
of the current job submitted by the PostScript interpreter to the printer. Error: stackoverflow papertray See page 4-8. printername (string) printername defined by the setprintername operator. The value of the string defines the printer name. A maximum of 32 characters are returned on the stack. - Lexmark 33S0300 | Technical Reference - Page 228
or 1 to 240 (Model specific) Number of minutes elapsed after last page prints before Power Saver is invoked. Power Saver reduces power consumption when the printer is idle. When quiet is enabled, it takes longer to print the first page after the - Lexmark 33S0300 | Technical Reference - Page 229
returns a boolean with the same value as the RealFormat system parameter. It indicates the printer microprocessor native real number representation. A query determines if the printer real number representation matches the application real number representation and compensates if necessary. Error - Lexmark 33S0300 | Technical Reference - Page 230
4-35 PostScript resolution - resolution integer queries the resolution for the current print job. An integer is returned on the stack: 300 300 dpi is set to On 600 600 dpi is set to On 1200 1200 dpi is set to On This operator is equivalent to executing the following PostScript emulation sequence: - Lexmark 33S0300 | Technical Reference - Page 231
default settings for serial communication parameters. channel has the following valid integer values: 9 25 If only one serial interface port is available on the printer, both 9 and 25 return the same values. Baud and option values are returned on the stack. baud returns the value of the Baud menu - Lexmark 33S0300 | Technical Reference - Page 232
4-37 PostScript sccinteractive channel sccinteractive baud options provided for parsing compatibility purposes. A value of 0 is returned. Errors: invalidaccess, rangecheck, stackoverflow, stackunderflow, typecheck setcoverpage boolean setcoverpage - specifies a cover page for a fax job. The - Lexmark 33S0300 | Technical Reference - Page 233
setdoprinterrors sets the system parameter DoPrintErrors to the value of boolean. It also indicates the current value of the Print PS Error printer setting. The DoPrintErrors system parameter must be present for the setdoprinterrors operator to be present. The boolean values indicate: true Print PS - Lexmark 33S0300 | Technical Reference - Page 234
4-39 PostScript setdoret integer setdoret - changes the PQET setting for the next page through the end of the print job. The integer values allowed are: 0 turn PQET Off 1 turn PQET On 2 turn PQET On 3 turn PQET On 4 turn PQET On The value you select for PQET returns to the user default setting - Lexmark 33S0300 | Technical Reference - Page 235
search order for the devices determines which one is executed. • If false, the printer does not execute a Sys/Start file. Errors: invalidaccess, stackunderflow, typecheck setduplexmode boolean side of the next sheet. • For printers that do not support duplexing, this value is always set to false. - Lexmark 33S0300 | Technical Reference - Page 236
page of a job to print before returning a Ctrl-D to the host computer. The boolean values indicate: true printer waits for the last page of the job to print false printer does not wait for the last page of the job to print Errors: invalidaccess, stackunderflow, typecheck setethernetaddress string - Lexmark 33S0300 | Technical Reference - Page 237
does not exist. sethardwareiomode integer sethardwareiomode - is parsed and discarded. In addition, one integer is removed from the stack. It supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. Errors: invalidaccess, stackunderflow, typecheck setidlefonts mark... setildefonts - Lexmark 33S0300 | Technical Reference - Page 238
second sides being printed. While printing the second sides the printer's available paper sources are restricted to the automatic tray (tray1) and the manual paper feeder for the remainder of the job or until the manual duplex mode value is changed. Error: stackunderflow, typecheck setpapertray See - Lexmark 33S0300 | Technical Reference - Page 239
changes made by this operator are not active until the end of the print job. Note: Some printer models released in the year 2000 or later designated as Energy Star printers cannot have Power Saver disabled. This operator is equivalent to executing the following PostScript emulation sequence: %Go - Lexmark 33S0300 | Technical Reference - Page 240
4-45 PostScript setresolution integer setresolution - changes the resolution for the current print job and discards unprinted data. See your printer documentation for a list of supported resolutions. The following integers are valid: 300 600 1200 300 dpi is set to On 600 dpi is set to On 1200 - Lexmark 33S0300 | Technical Reference - Page 241
is parsed, and three integers are removed from the stack and discarded. Errors: invalidaccess, rangecheck, stackunderflow, typecheck setsoftwareiomode integer setsoftwareiomode - supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. It is parsed, and an integer is removed from the - Lexmark 33S0300 | Technical Reference - Page 242
integer setuserdiskpercent - removes an integer from the stack and discards it. Errors: stackunderflow, rangecheck, invalidaccess, typecheck softwareiomode - softwareiomode 0 supports compatibility with the IBM LaserPrinters 4019, 4029, and 4039. It is parsed and returns a 0 (zero, Binary Mode Off - Lexmark 33S0300 | Technical Reference - Page 243
4-48 PostScript userdiskpercent - userdiskpercent 0 returns a 0 (zero) on the stack. Errors: stackoverflow, invalidaccess waittimeout - waittimeout integer queries the current value for the WaitTimeout user parameter. An integer is returned on the stack: 0 disabled 15...65355 seconds This operator - Lexmark 33S0300 | Technical Reference - Page 244
about the parameters is given in Table 4-8 than in the PostScript Language Reference Manual (Third Edition) by Adobe Systems, Inc. To determine which parameters and default values your printer supports, see Table C-2 on page C-4. Table 4-8: Page Device Parameters Key BeginPage Collate Type - Lexmark 33S0300 | Technical Reference - Page 245
controls the Toner Saver feature. True False Starts the printer toner saver mechanism Stops the printer toner saver mechanism W810. PictureGrade is an integer that provides compatibility with previous Lexmark printer drivers. PictureGrade works in conjunction with Screening. If Screening is - Lexmark 33S0300 | Technical Reference - Page 246
the user. The values are confined to values known by the printer operating system. MediaType entries in the InputAttributes dictionaries can be modified print material must be of the same paper type. The following values are supported: /Off No size substitution is performed. /A4-Letter If A4 is - Lexmark 33S0300 | Technical Reference - Page 247
is a constant value. To find the value of Type for your printer, see Table C-2 on page C-4. ColorCorrection is a null, string, is an integer that controls the print quality settings. The following values are supported: 0 Quick Print 1 Normal 2 Presentation 3 1200 Image Q Indicates if - Lexmark 33S0300 | Technical Reference - Page 248
4-53 PostScript Table 4-8: Page Device Parameters (Continued) Key ImagingBBox InputAttributes Type array or null dictionary Definition Defines a rectangle that lies within the boundaries of the page specified by PageSize. ImagingBBox may be either a value of null or an array of four numbers. - Lexmark 33S0300 | Technical Reference - Page 249
Jog procedure integer Note: Values 3 and 4 for the Hewlett Packard Company's LaserJet printers are switched relative to the /Optra values 3 and 4. Priority is an array which Offset Pages setting is used. The following values are supported: 0 Offset Pages is disabled. 1 Offset Pages is - Lexmark 33S0300 | Technical Reference - Page 250
if the current (or active) source is a manual source. The following values are supported: True False Manual feed Automatic feed If ManualFeed is set to NupDetails parameters are active. Nup is Off. For some printers, the value of Nup is set through the Multipage Printing menu item. For more - Lexmark 33S0300 | Technical Reference - Page 251
the orientation of the individual Nup pages on the printed page. Supported values are: 0 Portrait 1 Landscape Orientation determines the positioning of of page images depends on whether they are sent to the printer as portrait or landscape images. The following examples show the result - Lexmark 33S0300 | Technical Reference - Page 252
then across. Type is a constant value. To find the value of Type for your printer, see Table C-2 on page C-4. LandscapeOverride is a boolean which specifies the orientation of Nup pages. Supported values are: False Orientation is specified by the PageSize parameter. True Orientation is assumed to - Lexmark 33S0300 | Technical Reference - Page 253
issued, if no match is found for the OutputType string, the paper exits into the standard output bin. Specifies if pages are actually printed. Supported values are: True False Job is processed as usual (default). No page is printed, but all other job processing occurs. Specifies the output bin - Lexmark 33S0300 | Technical Reference - Page 254
. Implement the requested PageSize on the previously selected media without making adjustments. The way the image is positioned on the media is printer-dependent and may result in part of the image being clipped. 23 If the SubstituteSize parameter from the DeviceRenderingInfo dictionary is set - Lexmark 33S0300 | Technical Reference - Page 255
parameter can only be modified within a system administration job. Specifies the color model to use for rendering process colors in the printer. Supported values are: DeviceGray DeviceRGB DeviceCMYK DeviceCMY Requests holes to be punched in the output page. The format for setting the Punch key - Lexmark 33S0300 | Technical Reference - Page 256
Type 96 /SlipSheetSource n>> >> setpagedevice Type is a constant value. To find the value of Type for your printer, see Table C-2 on page C-4. Specifies whether to staple the current print job. Supported values are: 0 Do not staple the print job. 1 Staple each set in the front position. 2 Staple - Lexmark 33S0300 | Technical Reference - Page 257
that defines the x and y values (in points) for Universal. Orientation is an integer that defines how the Universal paper will be fed through the printer. Supported values are: 0 Paper is fed short edge first. 1 Paper is fed long edge first. Prompt defines a string to be displayed on the operator - Lexmark 33S0300 | Technical Reference - Page 258
) value is used. If a setuserparams value does not match the type of the specified parameter, a typecheck error occurs. If a parameter is not supported by the printer, it is ignored. An attempt to change the value of a read-only parameter has no effect on the parameter. To determine which parameters - Lexmark 33S0300 | Technical Reference - Page 259
at the time the halftone operator is executed. 2 Not supported. HalftoneMode is set to 1. Legal values: True False an upper limit dependent on the MaxFontCache system parameter and the amount of printer memory. Legal values: Any non-negative integer. Maximum number of bytes occupied - Lexmark 33S0300 | Technical Reference - Page 260
at the beginning of a job and at the end of a job, and then calculating the difference to determine how many pages are submitted to the printer for a specific job. This parameter is not valid for tracking pages between jobs. Legal values: True False Indicates the copypage command is processed as - Lexmark 33S0300 | Technical Reference - Page 261
of the specified parameter cause typecheck errors. Parameters that are not supported by the printer are ignored. An attempt to change the value of a read- currently occupied by the form cache. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement - Lexmark 33S0300 | Technical Reference - Page 262
generated print jobs by substituting PostScript procedures in the job's ProcSet with fast functions that are built into the printer firmware. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016. 2 These parameters are available with the Adobe - Lexmark 33S0300 | Technical Reference - Page 263
of the current job. FactoryDefaults boolean If set to True and the printer is then immediately powered off, all non-volatile parameters revert to factory default would be in Resource/Pattern/LexmarkLogo. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language - Lexmark 33S0300 | Technical Reference - Page 264
. MaxScreenStorage integer (Read-only) See Table C-4 on page C-10 for the default value of your printer. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016. 2 These parameters are available with the Adobe PostScript Language Supplement - Lexmark 33S0300 | Technical Reference - Page 265
uses to locate fonts. (Read-only) Serial number of your printer. StartJobPassword string (Write-only) Controls the ability of the startjob memory (in bytes) on the controller board. 1 These parameters are Lexmark-specific and are in addition to the Adobe PostScript Language Supplement 2016 - Lexmark 33S0300 | Technical Reference - Page 266
indicates an infinite timeout. If you select a number between 1 and 14, 15 is set. Legal values: x = 0, 15 - Lexmark 33S0300 | Technical Reference - Page 267
channels are: - %SerialA% - %SerialB% - %SerialC% - %SerialD% For some printers, no "A" channel exists. If %Serial% is specified, it refers to the channel where the on page 6-1. To determine which devices your printer supports, see Table C-5 on page C-13. To determine which device parameters your - Lexmark 33S0300 | Technical Reference - Page 268
%ParallelB%, %ParallelC%, %ParallelD% (%Parallel_NV% and %Parallel_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and - Lexmark 33S0300 | Technical Reference - Page 269
to None or Ignore. DataBits integer Returns the value of the Data Bits menu item. DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and all preceding jobs - Lexmark 33S0300 | Technical Reference - Page 270
is set to Off. For more information, see "Using SmartSwitch" on page 4-1. boolean Supported values are: True False RobustXon is set to On. RobustXon is set to Off. RS-232/RS-422 menu item. Supported values are: RS232 RS422 Returns RS232 on a printer that is attached with a cable that does not - Lexmark 33S0300 | Technical Reference - Page 271
LocalTalkB%, %LocalTalkC%, %LocalTalkD% (%LocalTalk_NV% and %LocalTalk_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job - Lexmark 33S0300 | Technical Reference - Page 272
EtherTalkB%, %EtherTalkC%, %EtherTalkD% (%EtherTalk_NV% and %EtherTalk_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job - Lexmark 33S0300 | Technical Reference - Page 273
Device %IR%, %IR_A%, %IR_B%, %IR_C%, %IR_D% (%IR_NV% and %IR_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and all - Lexmark 33S0300 | Technical Reference - Page 274
%USB%, %USB_A%, %USB_B%, %USB_C%, %USB_D% (%USB_NV% and %USB_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and all - Lexmark 33S0300 | Technical Reference - Page 275
On boolean Designates if the communication channel is On and able to receive and send data. Supported values are: True False Data is sent and processed. Data is lost. PCLSmartSwitch boolean Supported values are: True False PCL SmartSwitch is On. PCL SmartSwitch is Off. For more information - Lexmark 33S0300 | Technical Reference - Page 276
DelayedOutputClose Enabled Filtering HasNames Interpreter NodeID On PCLSmartSwitch PortLocation PSSmartSwitch Type Definition boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job - Lexmark 33S0300 | Technical Reference - Page 277
AppSocketB%, %AppSocketC%, %AppSocketD% (%AppSocket_NV% and %AppSocket_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job - Lexmark 33S0300 | Technical Reference - Page 278
%RemotePrinterC%, %RemotePrinterD% (%RemotePrinter_NV% and %RemotePrinter_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current - Lexmark 33S0300 | Technical Reference - Page 279
%PrintServerC%, %PrintServerD% (%PrintServer_NV% and %PrintServer_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and - Lexmark 33S0300 | Technical Reference - Page 280
%LexLinkB%, %LexLinkC%, %LexLinkD% (%LexLink_NV% and %LexLink_Pending% contain the same parameters) DelayedOutputClose boolean Selects how the printer manages the port at the end of each print job. Supported values are: True False An end-of-file message is not sent until the current job and all - Lexmark 33S0300 | Technical Reference - Page 281
: True False NetworkMask string (Read-only) On boolean Designates if the communication channel is On and able to receive and send data. Supported values are: True False Data is sent and processed. Data is lost. Physical string (Read-only) PortLocation string (Read-only) Designates the - Lexmark 33S0300 | Technical Reference - Page 282
%EthernetPhysicalD% EthernetAddress string (Read-only) On boolean Designates if the communication channel is On and able to receive and send data. Supported values are: True False Data is sent and processed. Data is lost. PortLocation string (Read-only) Designates the physical location of - Lexmark 33S0300 | Technical Reference - Page 283
75 0.75 - Lexmark 33S0300 | Technical Reference - Page 284
integer (Read-only) Page Count TimeToStandby integer Power Saver. Supported values are: 0 to 120, in minutes Type name ( disk is not mounted or is full. HasNames boolean (Read-only) Indicates if the disk supports named files. Valid only if the disk is mounted (mounted is set to True). If - Lexmark 33S0300 | Technical Reference - Page 285
the disk is mounted. A value of 0 (zero) indicates that the device is not mounted. Removable boolean (Read-only) Indicates if the drive supports removable disks. Always returns False. Searchable boolean (Read-only) Indicates if the disk participates in searches in the file system operations that - Lexmark 33S0300 | Technical Reference - Page 286
for a flash that is mounted. A value of 0 indicates that the device is not mounted. boolean (Read-only) Indicates if the drive supports removable flash. boolean (Read-only) Indicates if the flash participates in searches in file system operations that specify a filename without specifying a device - Lexmark 33S0300 | Technical Reference - Page 287
set to True). A value of 0 (zero) indicates that either the ROM is not mounted or it is full. HasNames boolean (Read-only) Indicates if ROM supports named files. Valid only if ROM is mounted (mounted is set to True). If ROM is not mounted, this parameter has a value of False. InitializeAction - Lexmark 33S0300 | Technical Reference - Page 288
+T (x'14') command as a status query when data is received through the LocalTalk interface. Tagged Binary Active When Tagged Binary is active, your printer always responds to a Ctrl+T (x'14') command as a status query and selects the PostScript emulation interpreter to process the current print job - Lexmark 33S0300 | Technical Reference - Page 289
status: busy; source: Parallel ]%% The following table lists the possible keys and value descriptions. To determine which status message keys your printer supports, see Table C-7 on page C-23. Table 4-12: Status Message Keys and Value Descriptions Key job status source Value Description The name - Lexmark 33S0300 | Technical Reference - Page 290
5-1 Languages CHAPTER 5: Switching Languages Your printer may support both PCL emulation and PostScript emulation. See your printer documentation for more information. This chapter describes ways to switch printer languages and explains when you may want to choose one method over another. - Lexmark 33S0300 | Technical Reference - Page 291
to send a job to that interface using that language, you must begin the job with a PJL command to override the settings you made from the printer operator panel or through MarkVision Professional. For example, if you set PCL emulation to Off for the serial interface and later decide to send a job - Lexmark 33S0300 | Technical Reference - Page 292
examines the received data stream, attempts to determine the type of data stream, and automatically switches to the proper language. The printer examines the active printer language and decides when an End-of-Job point occurs. End-of-Job points are: • SIC command • UEL command • Print timeout - Lexmark 33S0300 | Technical Reference - Page 293
, all information currently stored on the device is lost. If flash memory or a disk becomes full while downloading resources, a message displays on the printer operator panel or through MarkVision Professional. The file being downloaded is not saved unless room is available to store the entire file. - Lexmark 33S0300 | Technical Reference - Page 294
flash memory and disk or format the flash memory or disk using this printer utility. • A PJL command (see "LDOWNLOADTARGET" on page 3-30 and or symbol sets) in RAM, the resources can be lost if the printer is reset or if the printer language changes while Resource Save is set to Off. In each case, - Lexmark 33S0300 | Technical Reference - Page 295
6-3 Memory Storing Resources on Flash Memory or Disk Complete the following steps to download resources to flash memory or disk using the printer operator panel, MarkVision Professional, or a PJL command. 1 Set the download target to flash memory or disk. Resource Data Collection mode is enabled - Lexmark 33S0300 | Technical Reference - Page 296
or disk is installed. Part Name Part Name as it is stored in the flash memory card header. If flash memory is formatted by the printer, the part name field is shown as FLASH. The part name field for the disk is not printed. - Lexmark 33S0300 | Technical Reference - Page 297
6-5 Memory Part Number Part Number as it is stored in the flash memory card header. If the flash memory is formatted by the printer, the part number field is shown as (none). The part number field for the disk is not printed. Write Password Protected Indicates the entire flash - Lexmark 33S0300 | Technical Reference - Page 298
can be stored on flash memory or disk have unique extensions. The following file types are recognized by the flash format used on earlier printer models; the name of the file type printed in the directory appears in parenthesis. .t1 (PostScript font) .sFnt5 (PCL scalable font) .bFnt5 (PCL bitmap - Lexmark 33S0300 | Technical Reference - Page 299
description field for macros or symbol sets is blank unless the description field in the file header is set by the PJL LRESOURCE command. See "Printer Unique LRESOURCE Variables" on page 3-52. The description for macros or symbol sets can be set only once for files stored in flash memory. The - Lexmark 33S0300 | Technical Reference - Page 300
0), it cannot be changed back to binary 1 without a complete flash memory format. As PostScript emulation file operators write data to flash memory, the printer microcode software verifies that none of the bits being set to binary 1 is binary 0. If any attempt is made to change a 0 bit back to - Lexmark 33S0300 | Technical Reference - Page 301
6-9 Memory Accessing Files with PostScript Emulation File Naming Conventions For any PostScript emulation operator that requires a filename parameter, the filename can be one of the following: %device%filename Specifically references a file on a particular device. If the filename does not exist on - Lexmark 33S0300 | Technical Reference - Page 302
unit and the first (0) logical partition on the device. Currently, one physical device (for ROM, flash memory, and disk) is supported. The disk supports only the first (0) logical partition. Filenames Each file on a device has a unique name to identify the information contained within the file - Lexmark 33S0300 | Technical Reference - Page 303
6-11 Memory The value of this operator adds the extension .data to all filenames referenced when using PostScript emulation file operators. To prevent the .data extension from being added, issue the following PostScript emulation command: statusdict begin false setfilenameextend end To add the . - Lexmark 33S0300 | Technical Reference - Page 304
6-12 Memory Device Search Order If you are using the PostScript emulation operators run, file, renamefile, status or eexec, you do not need to specify the device. If you omit the device name, devices are searched in the default order: disk and then flash memory. If the following PostScript - Lexmark 33S0300 | Technical Reference - Page 305
1MB/second Write 70KB/second 200KB/second Job Buffering Job buffering to the disk lets you store incoming print jobs on a disk installed on your printer. Although job buffering is designed for individual workstations and networks using MarkVision Professional as the primary tool to control - Lexmark 33S0300 | Technical Reference - Page 306
be able to read and write files at a sustained rate of 600Kb/sec. The Lexmark hard disk option supports this requirement. Some advantages of job buffering include: • The printer accepts print jobs more quickly. • The printer accepts print jobs from all ports as long as the disk is not filled. • The - Lexmark 33S0300 | Technical Reference - Page 307
delete or resize the job buffer partition. Recovering from a Power Loss If the printer loses power, the job being spooled to the disk may be lost. Jobs already if you want to print the jobs held in the buffer. See your printer documentation for information on how to cancel the jobs or print the jobs - Lexmark 33S0300 | Technical Reference - Page 308
Specifications This chapter lists printer specifications and information about hardware, environmental conditions, and power requirements. Airflow Requirement Room should meet ASHRAE 62-1989 standards. Noise Emission Levels The following measurements - Lexmark 33S0300 | Technical Reference - Page 309
range E250d, E250dn, E350d, E352dn, E450dn 90-110 V at 50/60 Hz (+/-3), nominal Other Voltage Models (Japan only) 1Using 220-110 power converter with 110 V printer is not recommended. Warning: Lexmark recommends that you do not use voltage converters with - Lexmark 33S0300 | Technical Reference - Page 310
7-3 Specifications Power Requirements The following tables list the nominal average power requirements (including fuser power). Table 7-3: Lexmark E120 and E120n average power requirements Printing states Average power while printing Power consumption Continuous printing (xW or less) Ready Mode - Lexmark 33S0300 | Technical Reference - Page 311
Current while printing 100 Volts 120 Volts 230 Volts E238, E240, E240n 8.6 A 7.7 A 3.4 A 6 A 6 A 3 A E340, E342n 8.6 A 7.7 A 3.4 A 6 A 6 A 3 A Table 7-5: Lexmark E250d, E250dn, E350d, E352dn, and E450dn nominal average power requirements Printing states Power Consumption: Continuous printings - Lexmark 33S0300 | Technical Reference - Page 312
Specifications Table 7-6: Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, and E450dn Dimensions Printers Length Width Height Weight E120, E120n 485 mm 292 mm 325 mm 8.57 kg (19.09 in) (11.5 in.) (12.8 in.) (18.9 lb) Toner cartridge (2K) 350 - Lexmark 33S0300 | Technical Reference - Page 313
7-6 Specifications Clearance Requirements Table 7-7: Lexmark E120, E120n, E238, E240, E240n, 12 in.) 200 mm (8 in.) 90 mm (3.5 in.) 150 mm (6 in.) Note: When installing the printer, the customer should allow enough room to access the paper tray(s) and paper exits. E250d, E250dn, E350d, 609 - Lexmark 33S0300 | Technical Reference - Page 314
7-7 Specifications Environmental Conditions Note: When shipping or storing printers, always pack the printer supplies (cartridges and photoconductors, for example) separately. Table 7-8: Air Temperature Ranges Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, - Lexmark 33S0300 | Technical Reference - Page 315
the Software and Documentation CD. See "Network Support" on page 8-30 for more information about print servers. See your printer documentation for information on which printer interface options your printer supports and for detailed installation instructions. Note: All print servers are capable of - Lexmark 33S0300 | Technical Reference - Page 316
8-2 Interfaces Setting Up the Communications Port You must establish communication between your printer and computer. To do this, you define your communications port in the application you are using. Instructions for several applications or operating systems are as follows. Setting Up the - Lexmark 33S0300 | Technical Reference - Page 317
example, if you select the COM1 port, then the Settings for COM1 screen displays. 7 Fill out the fields for the following printer settings to make them match your printer settings: • Baud Rate • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if you want DTR protocol or Xon - Lexmark 33S0300 | Technical Reference - Page 318
Communications Port [COM1] Properties screen displays. 9 Click the Port Settings tab. 10 Fill out the fields for the following printer settings to make them match your printer settings: • Bits per second • Data bits • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if you - Lexmark 33S0300 | Technical Reference - Page 319
the Communications Port [COM1] Properties screen displays. 8 Click the Port Settings tab. 9 Fill out the fields for the following printer settings to make them match your printer settings: • Bits per second • Data bits • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if - Lexmark 33S0300 | Technical Reference - Page 320
. Use a serial interface when you: • Require an interface cable more than 10 feet in length. Note: Lexmark also offers a 20-ft parallel interface cable (part number 1427498). • Need to connect the printer to a computer that does not have an available parallel port. Attach network cables to the Token - Lexmark 33S0300 | Technical Reference - Page 321
Interfaces Parallel Interface Use the Lexmark 3.04 m (10 ft) parallel cable part number 1021231, or a cable that is IEEE 1284 compliant, to connect your printer to a personal computer or to a host system with a Centronics-compatible parallel port. See your printer documentation for the location of - Lexmark 33S0300 | Technical Reference - Page 322
remains intact. • Variable default paper size settings become the active paper formatting size. • If paper is loaded in a tray with auto size sensing, the printer resets the active default paper formatting size to the size of the paper in the tray. • INIT* is not honored when Hex Print is active - Lexmark 33S0300 | Technical Reference - Page 323
assignments for connecting the 25-pin connector to the 36-pin connector. The symbol * indicates an active low signal. Printer Side 36-Pin Connector 1284-B Computer Side 25-Pin Connector Note: Lexmark IEEE 1284 compliant cables are supported up to 20 feet. Cable lengths greater than 20 feet are not - Lexmark 33S0300 | Technical Reference - Page 324
are totem-pole TTL devices. All printer input/output (I/O) are devices with an internal pull-up resistor to 5 V. Rise and fall times of each signal must be less than 1,500 nanoseconds (ns) without slope reversal. Note: For best results, use the Lexmark 1.83 m (6 ft) parallel cable, part number - Lexmark 33S0300 | Technical Reference - Page 325
8-11 Interfaces Standard Protocol Data Transfer Sequence The following illustration shows the typical data transfer sequence on the parallel interface. See Table 8-1 for typical parallel interface timings on the parallel interface. DATA1-8 STROBE* BUSY ACK* AB C D G F E - Lexmark 33S0300 | Technical Reference - Page 326
personal computers and operating systems. Fastbytes protocol is the printer default. If you have data transmission problems between your personal computer and the printer, change the parallel protocol to Standard. This causes the printer to operate in IEEE-compliant compatibility mode. The following - Lexmark 33S0300 | Technical Reference - Page 327
50 min. 500 min. 400 min. +/ - 20 max. 400 min. Printer-to-Computer Communication (Advanced Status) The printer has a standard IEEE 1284-B compliant connector and is an IEEE 1284-I compliant documentation will be met. The printer supports: • Compatibility mode • Nibble mode • Byte mode • ECP mode - Lexmark 33S0300 | Technical Reference - Page 328
.EXE. Use your web browser to access ftp:// ftp.lexmark.com/pub/driver/technical_brief/LEXPARAL.EXE. When the Advanced Status menu item is set to On, the printer supports IEEE 1284 communication. If the attached host computer does not support IEEE 1284 communication, you can turn Advanced Status to - Lexmark 33S0300 | Technical Reference - Page 329
where data should be valid. If Parallel Mode 2 is Off, the printer automatically turns Advanced Status to Off, eliminating any IEEE 1284 data flow this feature helpful when having data transfer reliability problems. Signal Descriptions STROBE Receiver for the Lexmark E120, E120n, E238, E240, E240n, - Lexmark 33S0300 | Technical Reference - Page 330
8-16 Interfaces Connector Pin 74LVC161284 GND 470 pF ±10% - Lexmark 33S0300 | Technical Reference - Page 331
E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, E450dn The following diagram illustrates the DATA 1-8 signal driver/receivers for the Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352d, E352dn, E450dn. Connector Pin 74LVC161284 GND 150 pF - Lexmark 33S0300 | Technical Reference - Page 332
8-18 Interfaces ACKNLG*, ERROR*, SLCT, PE Drivers for the Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, E450dn The following diagram illustrates the ACKNLG*, ERROR*, SLCT, PE drivers for the Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, - Lexmark 33S0300 | Technical Reference - Page 333
E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352dn, E450dn The following diagram illustrates the BUSY driver and the INIT* receiver for the Lexmark E120, E120n, E238, E240, E240n, E250d, E250dn, E340, E342n, E350d, E352d, E352dn, E450dn. INIT* (input) 50K ohm ±5% 1500 - Lexmark 33S0300 | Technical Reference - Page 334
) Lexmark cable to connect a printer and a computer located up to 20 feet apart.) When using the serial interface, your printer has the following differences from the serial interface on some other printers: • The printer returns XON/XOFF with 2 stop bits in all cases. • The printer does not support - Lexmark 33S0300 | Technical Reference - Page 335
the RS-232C serial interface. How to Connect the RS-232C Serial Interface Use Lexmark serial cable P/N 1038693 (15.24 m or 50 ft) to connect the terminal. 4 RTS Out Request to Send. The printer sets this signal high and the signal remains high while the printer is on. 5 CTS In Clear to Send. - Lexmark 33S0300 | Technical Reference - Page 336
with Serial Interface RS-232C Note: These instructions are for connecting the printer to an IBM-compatible personal computer using Null modem cables, such as Lexmark part number 1038693 [15.24 m (50 ft)], will connect the converter cable to the printer. The illustration below represents the 25 - Lexmark 33S0300 | Technical Reference - Page 337
for the 9-pin to 25-pin IBM EIA RS-232C serial cables. 9 to 25 Pin Cable Adapter, such as IBM 6450242 (10 in.) Lexmark 1038693 (50 ft) Shield Shield 9 (F) 25 (M) 25 (F) 25 (M) Serial Communication Parameters (RS-232C) The following paragraphs show acceptable values for serial communication - Lexmark 33S0300 | Technical Reference - Page 338
byte. The port transmits XOFF and XON with even parity. If the port detects a parity error, the port sends an inverted question mark to the printer instead of the character sent by the host system. The port expects no parity bit when it receives data. The port transmits XON and XOFF - Lexmark 33S0300 | Technical Reference - Page 339
XON/XOFF • XON/XOFF/DTR • XON/XOFF/DTR/DSR Your printer supports two modes in which both hardware and software data flow control protocols are performed. In XON XON/XOFF, XON/XOFF/DTR, or XON/XOFF/DTR/DSR pacing. The printer sends a continuous stream of XON signals to the host computer to indicate that - Lexmark 33S0300 | Technical Reference - Page 340
signal in the three data flow control protocols when the Honor DSR setting is Off. Table 8-5: Serial Link (All Protocols) with Honor DSR Off Printer Signal XON/XOFF Protocol (Honor DSR Off) DTR Protocol (Honor DSR Off) DTR/DSR Protocol (Honor DSR Off) DTR (Output) Always active Flow control - Lexmark 33S0300 | Technical Reference - Page 341
low and discards the data. Only DTR/DSR is used for flow control from the printer to the host computer. 4 DTR drops to tell the computer that the receive buffer is nearly full or that the printer is busy and that data transmission should stop. About 640 free bytes remain in the - Lexmark 33S0300 | Technical Reference - Page 342
DSR is low and discards the data. (This is conditional depending on the setting of Honor DSR.) 4 After you power on the printer and DTR is active, the printer sends an XON signal to the computer (DC1 control or X'11'). However, the computer does not need to detect this initial XON before - Lexmark 33S0300 | Technical Reference - Page 343
and your computer operating system must be configured identically. The following is an example of how to configure DOS for the printer using serial DTR protocol: DOS: From the DOS prompt, enter the following commands: mode comy:9600,n,8,1,p mode lptx :=comy where x equals 1, 2, or 3, and y equals - Lexmark 33S0300 | Technical Reference - Page 344
serial devices. • Identify the device. • Locate a driver for the device. • Detect detachment of serial devices. Network Support Installing an internal print server enables you to connect your printer to a local area network (LAN). The print server supports these network interfaces: • The Token-Ring - Lexmark 33S0300 | Technical Reference - Page 345
server. Use one of the following: • Lexmark MarkNet print servers • IBM LAN Connection for Printers and Plotters (IBM 4033) Note: Network capabilities are standard on some printer models. See your printer documentation for more information. Input Buffer Your printer has an input (link) buffer for - Lexmark 33S0300 | Technical Reference - Page 346
2MB 2MB 300K 1MB Note: MB represents 1,048,576 bytes. K represents 1024 bytes. N/A means non-applicable. Note: When using serial communication, the printer signals the host computer to stop transmitting bytes when the serial input buffer is within 640 bytes. In addition, when XON/XOFF protocol - Lexmark 33S0300 | Technical Reference - Page 347
them, see "PCL Emulation" on page 2-1. Table A-2 on page A-7 identifies printer support for the GL/2 commands. Table A-1: PCL Emulation Commands ✓ Supported ✘ Not Supported Page numbers reference command descriptions Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d - Lexmark 33S0300 | Technical Reference - Page 348
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table A-1: PCL Emulation Commands (Continued) ✓ Supported ✘ Not Supported Page numbers reference command descriptions Printer Model Command Function Page ESC&d#A Number of Collated Copies 2-52 ✓ ✓ ✓ ESC&d#D Underline-Enable 2-61 - Lexmark 33S0300 | Technical Reference - Page 349
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table A-1: PCL Emulation Commands (Continued) ✓ Supported ✘ Not Supported Page numbers reference command descriptions Printer Model Command Function Page l ESC& #Z Short-Edge Offset Registration 2-52 ✓ ✓ ✓ ESC&n#W Alphanumeric ID - Lexmark 33S0300 | Technical Reference - Page 350
, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table A-1: PCL Emulation Commands (Continued) ✓ Supported ✘ Not Supported Page numbers reference command descriptions Printer Model Command Function Page ESC)s#P Secondary Font Spacing 2-60 ✘ ✓ ✘ ESC)s#S Secondary Font Style - Lexmark 33S0300 | Technical Reference - Page 351
Emulation Commands (Continued) ✓ Supported ✘ Not Supported Page numbers reference command descriptions Printer Model Command Function Page ESC*c#Y ✓ ✓ ✓ ESC*o#M(b) Print Quality 2-74 ✘ ✓ ✓ ESC*o#W[data] Driver Configuration Command 2-70 ✓ ✓ ✓ ESC*p#P Push / Pop Palette 2-70 - Lexmark 33S0300 | Technical Reference - Page 352
ESC= Half Line-Feed 2-59 ✓ ✓ ✓ ESC%#A Enter PCL Emulation 2-73 ✓ ✓ ✓ ESC%#B Enter GL/2 Language 2-73 ✓ ✓ ✓ Note: The values of -1, 2, and 3 are not supported by any of the printers included in this document. ESC%-12345X Universal Exit Language (UEL) / 2-53 ✓ ✓ ✓ Start of PJL - Lexmark 33S0300 | Technical Reference - Page 353
E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table A-2: GL/2 Commands ✓ Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command Function Page AA Arc Absolute 2-75 ✓ ✓ ✓ AC Anchor Corner 2-77 ✓ ✓ ✓ AD Define - Lexmark 33S0300 | Technical Reference - Page 354
, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table A-2: GL/2 Commands (Continued) ✓ Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command Function Page FT Fill Type 2-77 ✓ ✓ ✓ FT Fill Type - 22 2-77 ✓ ✓ ✓ FT - Lexmark 33S0300 | Technical Reference - Page 355
E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table A-2: GL/2 Commands (Continued) ✓ Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command RT SA SB SC SD SI SL SM SP SR SS SV SV TD TM TR UL WG WU Function Arc Relative - Lexmark 33S0300 | Technical Reference - Page 356
description. Note: The word common applies to those variables common to both your Lexmark printer and the Hewlett-Packard Company's LaserJet printers. Table B-1: Common Variables for Both Printer Languages ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for - Lexmark 33S0300 | Technical Reference - Page 357
Table B-1: Common Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d - Lexmark 33S0300 | Technical Reference - Page 358
Table B-1: Common Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only. Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d - Lexmark 33S0300 | Technical Reference - Page 359
E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-2: Printer Unique PJL Variables for Both Printer Languages ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only - Lexmark 33S0300 | Technical Reference - Page 360
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only - Lexmark 33S0300 | Technical Reference - Page 361
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only - Lexmark 33S0300 | Technical Reference - Page 362
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only - Lexmark 33S0300 | Technical Reference - Page 363
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only - Lexmark 33S0300 | Technical Reference - Page 364
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only - Lexmark 33S0300 | Technical Reference - Page 365
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only - Lexmark 33S0300 | Technical Reference - Page 366
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-2: Printer Unique PJL Variables for Both Printer Languages (Continued) ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Default values are listed for exceptions only - Lexmark 33S0300 | Technical Reference - Page 367
, E450dn Variable Name PITCH PTSIZE SYMSET Page 3-48 3-48 3-48 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Table B-4: Printer Unique Variables for PCL Emulation ✓ Supported ✘ Not Supported Page numbers reference variable descriptions. Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d - Lexmark 33S0300 | Technical Reference - Page 368
, E250dn, E350d, E352dn, E450dn Table B-5: Common Variables for PostScript Emulation ✓ Supported ✘ Not Supported Page numbers reference variable descriptions and are listed for supported variables only. Printer Model Variable Name JAMRECOVERY PRTPSERRS ADOBEMBT Page 3-51 ✓ 3-51 ✓ ✘ Table - Lexmark 33S0300 | Technical Reference - Page 369
E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-7: Printer Unique LRESOURCE Variables ✓ Supported ✘ Not Supported Page numbers reference variable descriptions. Printer Model Variable Name LDESCRIPTION LRWLOCK LWLOCK Page 3-53 3-53 3-53 Table B-8: Status - Lexmark 33S0300 | Technical Reference - Page 370
, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-9: USTATUS Unsolicited Status Variables ✓ Supported ✘ Not Supported Page numbers reference variable descriptions. Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn. Variable Name - Lexmark 33S0300 | Technical Reference - Page 371
E250d, E250dn, E350d, E352dn, E450dn Table B-10: PJL Messages for Auto-Continuable Conditions (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required Complex Page 3-63 30017 39 Complex Page - Lexmark 33S0300 | Technical Reference - Page 372
E250d, E250dn, E350d, E352dn, E450dn Table B-10: PJL Messages for Auto-Continuable Conditions (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required - 3-64 30029 36 Resolution Reduced - Lexmark 33S0300 | Technical Reference - Page 373
-Continuable Conditions (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required - 3-65 30107 Insert Staple Cartridge ✘ ✘ ✘ Insert Staple Cartridge Intervention Required Insert Stapler - Lexmark 33S0300 | Technical Reference - Page 374
, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-10: PJL Messages for Auto-Continuable Conditions (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required Unformatted Flash 3-66 32052 53 - Lexmark 33S0300 | Technical Reference - Page 375
Close Toner Box Cover 3-67 40021 Close Cover A ✘ ✘ ✘ Intervention Required Close Deflector G 3-68 40021 Close Deflector G ✘ ✘ ✘ Intervention Required - 3-67 40021 31 Defective Print Cartridge ✓ ✓ ✓ Defective Print Cartridge Intervention Required Defective Ink Cartridge Intervention - Lexmark 33S0300 | Technical Reference - Page 376
, E350d, E352dn, E450dn Table B-11: PJL Messages for Attendance Conditions (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Intervention Required Unsupported XXXX1 Cartridge Page 3-67 Status Code 40021 Return String 32 Unsupported XXXX1 - Lexmark 33S0300 | Technical Reference - Page 377
Messages for Attendance Conditions (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Status Page Code Return String Intervention Required Insert Print Cartridge 3-69 40021 Insert Print Cartridge ✘ ✘ ✘ Intervention Required Paper Jam - Lexmark 33S0300 | Technical Reference - Page 378
3-70 40038 88 Yellow Toner Low 88 Magenta Toner Low ✘ ✘ ✘ 88 Cyan Toner Low 88 Black Toner Low 3-70 88 Color Print Cartridge Low ✘ ✘ ✘ 88 Black Print Cartridge Low 88 Photo Print Cartridge Low 3-70 88 Yellow Toner Empty ✘ ✘ ✘ 88 Magenta Toner Empty 88 Cyan Toner Empty 88 Black - Lexmark 33S0300 | Technical Reference - Page 379
. Printer Model Message Status Page Code Return String Intervention Required Replace PC Kit 3-71 40038 Replace PC Kit ✘ ✘ ✘ Intervention Required Replace PC Kit To Continue 3-71 40038 Replace PC Kit To Continue ✘ ✘ ✘ Intervention Required - 3-71 40038 Replace Toner Cartridge - Lexmark 33S0300 | Technical Reference - Page 380
Black cartridges, respectively. Table B-12: PJL Messages for Paper Handling ✓ Supported Printer Model ✘ Not Supported Page Tray x Intervention Required - 3-73 30034 34 Wrong Paper Size Manual ✘ ✘ ✘ Wrong Paper Size Manual Feed Feed x represents an input source code. For more information - Lexmark 33S0300 | Technical Reference - Page 381
E120, E120n E250d, E250dn, E350d, E352dn, E450dn Table B-12: PJL Messages for Paper Handling (Continued) ✓ Supported Printer Model ✘ Not Supported Page numbers reference message descriptions. Message Pag Status e Code Return String* E238, E240, E240n, E340, E342n Intervention Required - Lexmark 33S0300 | Technical Reference - Page 382
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-13: PJL Messages for Paper Jams ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-76 4200x ✘ ✘ ✘ Intervention Required Paper Jam - Lexmark 33S0300 | Technical Reference - Page 383
E342n E250d, E250dn, E350d, E352dn, E450dn Table B-13: PJL Messages for Paper Jams (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-76 4222x ✘ ✘ ✘ Intervention Required Paper Jam - Lexmark 33S0300 | Technical Reference - Page 384
E342n E250d, E250dn, E350d, E352dn, E450dn Table B-13: PJL Messages for Paper Jams (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-77 4249w ✘ ✘ ✘ Intervention Required Paper Jam - Lexmark 33S0300 | Technical Reference - Page 385
E342n E250d, E250dn, E350d, E352dn, E450dn Table B-13: PJL Messages for Paper Jams (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-78 4261w ✘ ✘ ✘ Intervention Required Paper Jam - Lexmark 33S0300 | Technical Reference - Page 386
E342n E250d, E250dn, E350d, E352dn, E450dn Table B-13: PJL Messages for Paper Jams (Continued) ✓ Supported ✘ Not Supported Page numbers reference message descriptions. Printer Model Message Page Status Code Intervention Required Paper Jam 3-79 4284x ✘ ✘ ✘ Intervention Required Paper Jam - Lexmark 33S0300 | Technical Reference - Page 387
B-14: Service Errors ✓ Supported ✘ Not Supported Page numbers reference message description. Printer Model Message ALL SERVICE MESSAGES Page B-16: Lexmark Unique PJL Commands ✓ Supported ✘ Not Supported Page numbers reference command descriptions. ✓ ✓ ✓ ✓ ✓ ✓ Printer Model Command LBEEP - Lexmark 33S0300 | Technical Reference - Page 388
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table B-16: Lexmark Unique PJL Commands (Continued) ✓ Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command LPORTROTATE LPRINT testpage • LPRINTDIRECTORY • LPRINTTESTPAGE • LPRINTMENUS • LPRINTPCLFONTS - Lexmark 33S0300 | Technical Reference - Page 389
E250d, E250dn, E350d, E352dn, E450dn Table B-17: File and Device Protection Commands ✓ Supported ✘ Not Supported Page numbers reference command descriptions. Printer Model Command LDECLARE LRESOURCE LDELETEPASSWORD LQUERYSEED LBYPASSPASSWORD KEY Page 3-95 3-96 3-98 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - Lexmark 33S0300 | Technical Reference - Page 390
. For detailed information about PostScript emulation, see "PostScript Emulation" on page 4-1. Table C-1: Supplemental Operators ✓ Supported ✘ Not Supported Page numbers reference operator descriptions. Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn - Lexmark 33S0300 | Technical Reference - Page 391
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-1: Supplemental Operators (Continued) ✓ Supported ✘ Not Supported Page numbers reference operator descriptions. Printer Model Operator Name dojamrecovery doprinterrors doret dostartpage dosysstart duplexer duplexmode enginesync file - Lexmark 33S0300 | Technical Reference - Page 392
, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-1: Supplemental Operators (Continued) ✓ Supported ✘ Not Supported Page numbers reference operator descriptions. Printer Model Operator Name PS2fonts PS3fonts quiet ramsize realformat renamefile resolution revision sccbatch - Lexmark 33S0300 | Technical Reference - Page 393
, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-1: Supplemental Operators (Continued) ✓ Supported ✘ Not Supported Page numbers reference operator descriptions. Printer Model Operator Name setpapertray setprintername setquiet setresolution setsccbatch setsccinteractive setsoftwareiomode - Lexmark 33S0300 | Technical Reference - Page 394
Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions 4-51 4-51 4-52 4-52 4-52 4-52 4-52 4-52 4-52 4-52 4-52 4-53 4-53 4-53 Printer Model ✓ ✓ ✓ ✘ ✘ ✘ ✓ ✓ ✓ ✓ ✓ ✓ ✘ ✘ ✘ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✘ ✘ ✘ ✓ - Lexmark 33S0300 | Technical Reference - Page 395
C-2: Page Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Default 4-54 4-54 4-55 4-55 4-55 4-55 4-55 4-55 4-55 4-55 4-56 4-56 4-56 4-56 Printer Model ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - Lexmark 33S0300 | Technical Reference - Page 396
Page Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. 58 4-58 4-58 4-58 4-58 4-58 4-58 4-58 4-58 4-58 4-58 4-58 4-58 4-59 4-59 4-59 4-59 4-59 4-59 Printer Model ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - Lexmark 33S0300 | Technical Reference - Page 397
C-2: Page Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values 4-60 4-60 4-60 4-60 4-60 4-61 4-61 4-61 4-61 4-61 4-62 4-62 4-62 4-62 4-62 4-62 Printer Model ✓ ✓ ✓ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✘ ✓ ✓ ✓ ✘ ✘ ✘ ✓ ✓ ✓ ✓ ✓ ✓ - Lexmark 33S0300 | Technical Reference - Page 398
, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-3: User Interpreter Parameters ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key AccurateScreens CollatedCopies HalftoneMode IdiomRecognition JobName JobTimeout MaxDictStack MaxExecStack MaxFontItem - Lexmark 33S0300 | Technical Reference - Page 399
, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-4: System Interpreter Parameters ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model Key BuildTime ByteOrder CurDisplayList CurFontCache CurFormCache CurInputDevice CurOutlineCache - Lexmark 33S0300 | Technical Reference - Page 400
, E350d, E352dn, E450dn Table C-4: System Interpreter Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model Key JobTimeout languagelevel MaxDisplayList MaxFontCache MaxFormCache MaxImageBuffer MaxOutlineCache - Lexmark 33S0300 | Technical Reference - Page 401
C-12 PostScript Support E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-4: System Interpreter Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Default values are listed. Printer Model Key ValidNV WaitTimeout - Lexmark 33S0300 | Technical Reference - Page 402
% %EtherTalkB% %EtherTalkC% %EtherTalkD% %IR_A% %IR_B% %IR_C% %IR_D% %USB_A% %USB_B% %USB_C% %USB_D% %TokenTalkA% %TokenTalkB% %TokenTalkC% %TokenTalkD% %AppSocketA% C-13 PostScript Support Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Page 4-66 - Lexmark 33S0300 | Technical Reference - Page 403
, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-5: Devices Supported (Continued) ✓ Supported ✘ Not Supported n Network version of the printer model Printer Model Device %AppSocketC% %AppSocketD% %RemotePrinterA% %RemotePrinterB% %RemotePrinterC% %RemotePrinterD% %PrintServerA - Lexmark 33S0300 | Technical Reference - Page 404
, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-6: Device Parameters ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key DelayedOutputClose Enabled Filtering Handshake HasNames Interpreter On OutputDevice PCLSmartSwitch PortLocation - Lexmark 33S0300 | Technical Reference - Page 405
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-6: Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key RobustXon SerialMode StopBits Type DelayedOutputClose Enabled Filtering HasNames Interpreter LocalTalkType - Lexmark 33S0300 | Technical Reference - Page 406
E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-6: Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key PSSmartSwitch Type DelayedOutputClose Enabled Filtering HasNames Interpreter On PCLSmartSwitch PortLocation - Lexmark 33S0300 | Technical Reference - Page 407
, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-6: Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Interpreter 4-81 ✓ ✓ ✓ NodeID 4-81 ✓ ✓ ✓ On 4-81 ✓ ✓ ✓ PCLSmartSwitch 4-81 - Lexmark 33S0300 | Technical Reference - Page 408
Table C-6: Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model E120, E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Key Page Device Parameters for the Communication Device %PrintServer%, PrintServerA - Lexmark 33S0300 | Technical Reference - Page 409
E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-6: Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Device Parameters for the Communication Device %IP%, %IP_A%, %IP_B%, %IP_C%, %IP_D - Lexmark 33S0300 | Technical Reference - Page 410
, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-6: Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Language 4-89 ✓ ✓ ✓ Type 4-89 ✓ ✓ ✓ Device Parameters for the Parameters Device - Lexmark 33S0300 | Technical Reference - Page 411
, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-6: Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Device Parameters for the Parameters Device %disk1% BlockSize 4-89 ✓ ✓ ✓ Free 4-89 - Lexmark 33S0300 | Technical Reference - Page 412
E120n E238, E240, E240n, E340, E342n E250d, E250dn, E350d, E352dn, E450dn Table C-6: Device Parameters (Continued) ✓ Supported ✘ Not Supported Page numbers reference parameter descriptions. Printer Model Key Page Device Parameters for the Parameters Device %rom% BlockSize 4-92 ✓ Free 4-92 - Lexmark 33S0300 | Technical Reference - Page 413
disk option, download target (PJL) 3-30 drivers ACKNLG* Lexmark C510 8-18 ERROR* Lexmark C510 8-18 PE Lexmark C510 8-18 SLCT Lexmark C510 8-18 DSR protocol 8-26 DTR protocol supported 4-10 Lexmark C510(n) 2-4 environmental commands and variables (PJL) 3-7 environmental conditions 7-7 errors, service - Lexmark 33S0300 | Technical Reference - Page 414
Collection mode 6-2 retrieval speed 6-13 rewriting contents 6-8 storing fonts, macros, and symbol sets 6-2 viewing the contents 6-3 fonts PCL emulation Lexmark X422 2-8 printing directory list for flash or disk 3-83, 6-3 saving on flash memory or disk 6-3 setting password protection 3-93 formatting - Lexmark 33S0300 | Technical Reference - Page 415
handling 3-72 paper sizes status message codes 3-74 paper sizes supported Lexmark C510(n) 2-4 paper trays PCL emulation paper size 2-54 paper source 2-54 PostScript emulation automatic size sensing search order 4-5 operators 4-7 Printer Job Language (PJL) paper size 3-14 paper source 3-39 status - Lexmark 33S0300 | Technical Reference - Page 416
two 2-71 color lookup tables 2-70 configure image data 2-71 driver configuration command 2-70 foreground color 2-71 gamma correction 2-71 monochrome number of collated copies 2-52 number of copies 2-52 output bin 2-56 printer reset 2-52 short-edge offset registration 2-52 simplex/duplex print 2-52 - Lexmark 33S0300 | Technical Reference - Page 417
set control 2-62 symbol set ID code 2-62 control codes 2-48 font and symbol set support Lexmark X422 2-8 GL/2 Language 2-74 linking commands 2-49 paper and envelope dimensions Lexmark C510(n) 2-4 password protection 3-93 saving files on flash memory or disk 6-3 selecting MarkVision Professional - Lexmark 33S0300 | Technical Reference - Page 418
6-9 device parameters 4-72 device search order 6-12 envelope size support 4-10 filenames 6-9 interpreter parameters 4-63 page device parameters 4-49 4-5 paper tray commands manualfeed 4-8 papertray 4-8 setpapertray 4-9 paper tray support 4-5 password protecting Type 1 fonts on flash memory or disk 3- - Lexmark 33S0300 | Technical Reference - Page 419
Low 3-71 88 Color Print Cartridge Low 3-70 88 Cyan Toner Empty 3-70 88 Cyan Toner Low 3-70 88 Magenta Toner Empty 3-70 88 Magenta Toner Low 3-70 88 Photo Print Cartridge Low 3-70 88 Toner Low 3-70 88 Yellow Toner Empty 3-70 88 Yellow Toner Low 3-70 89 Cartridge Empty 3-71 2xx Paper Jam - Lexmark 33S0300 | Technical Reference - Page 420
Size in Tray x 3-73 34 Wrong Paper Size Manual Feed 3- 73 Change 3-73 Check Paper Guide 3-73 Insert Duplex Pages & Press Go. 3-73 Kit 3-71 Replace PC Kit To Continue 3-71 Replace Toner Cartridge 3-71 Replace Toner Cartridge To Continue 3-71 Replace Transfer Kit 3-71 STMSG message - Lexmark 33S0300 | Technical Reference - Page 421
66 83 ITU Maintenance 3-66 Disk Corrupted. Reformat? 3-66 Empty Box M 3-65 Held Jobs May Not Be Restored 3-63 Insert Box M 3-65 Insert Staple Cartridge 3-65 Insert Stapler 3-65 Operation Failed Faxes on Disk 3-65 Operation Failed Jobs on Disk 3-65 Priming Failed, Retry. Go/Stop? 3-65 Print Jobs on - Lexmark 33S0300 | Technical Reference - Page 422
Low 3-61 88 Color Print Cartridge Low 3-61 88 Cyan Toner Low 3-61 88 Magenta Toner Low 3-61 88 Photo Print Cartridge Low 3-61 88 Toner Low 3-61, 3-62 88 Yellow Toner Low 3-61 Bin Full 3-62 Busy 3-62 Cancelling Job 3-62 Not Ready 3-61 Power Saver with 88 Ink Low 3-62 Powersaver 3-62 RDYMSG - Lexmark 33S0300 | Technical Reference - Page 423
LBLANKPAGES 3-19 LBONDLENGTH 3-19 LBONDLOADING 3-19 LBONDOUTBIN 3-20 LBONDTEXTURE 3-20 LBONDWEIGHT 3-20 LBWLOCK 3-20 LCANCEL 3-20 LCARDSTOCKLENGTH 3-20 LCARDSTOCKLOADING 3-20 LCARDSTOCKOUTBIN 3-21 LCARDSTOCKTEXTURE 3-21 LCARDSTOCKWEIGHT 3-21 LCOLLATION 3-21 LCOLORCORRECTION 3-21 LCOLOREDLENGTH 3-21 - Lexmark 33S0300 | Technical Reference - Page 424
LIMAGESMOOTHING 3-33 LINFEEDERSIZE 3-33 LINKALERT 3-33 LINMPFEEDERSIZE 3-33 LJAMRECOVERY 3-33 LLABELSLENGTH 3-33 LLABELSLOADING 3-33 LLABELSOUTBIN 3-34 LLABELSTEXTURE 3-34 LLABELSWEIGHT 3-34 LLASTTRAYRENUMBER 3-34 LLEFTMARGINOFFSET 3-34 LLETTERHEADLENGTH 3-34 LLETTERHEADLOADING 3-34 - Lexmark 33S0300 | Technical Reference - Page 425
3-19 printer languages, selecting MarkVision Professional 2-1 methods 5-1 operator panel 2-1, 4-1 PCL emulation 2-1 Printer Job Language 2-79 raster image graphics 2-78 receivers BUSY driver Lexmark C510 8-19 INIT* Lexmark C510 8-19 SLCTIN* Lexmark C510 8-20 required clearance 7-6 Resource Data - Lexmark 33S0300 | Technical Reference - Page 426
network support 8-30 RS-232C cable pin assignments 8-21 communication parameters 8-23 DTR and DTR/DSR protocol timing 8-27 port compatibility 8-30 protocol 8-26 serial configuration recommendations 8-29 using RS-232C 8-21 when to use 8-20 service errors 3-80 signal descriptions 8-15 size, printer - Lexmark 33S0300 | Technical Reference - Page 427
common for PostScript emulation 3-51 environment 3-7 printer unique for all printer languages 3-19 printer unique for PCL emulation 3-49 W weight, printer 7-5 whole page setting 2-7 X XON/XOFF protocol 8-25 RS-232C 8-28 X-15 Index
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
-
317
-
318
-
319
-
320
-
321
-
322
-
323
-
324
-
325
-
326
-
327
-
328
-
329
-
330
-
331
-
332
-
333
-
334
-
335
-
336
-
337
-
338
-
339
-
340
-
341
-
342
-
343
-
344
-
345
-
346
-
347
-
348
-
349
-
350
-
351
-
352
-
353
-
354
-
355
-
356
-
357
-
358
-
359
-
360
-
361
-
362
-
363
-
364
-
365
-
366
-
367
-
368
-
369
-
370
-
371
-
372
-
373
-
374
-
375
-
376
-
377
-
378
-
379
-
380
-
381
-
382
-
383
-
384
-
385
-
386
-
387
-
388
-
389
-
390
-
391
-
392
-
393
-
394
-
395
-
396
-
397
-
398
-
399
-
400
-
401
-
402
-
403
-
404
-
405
-
406
-
407
-
408
-
409
-
410
-
411
-
412
-
413
-
414
-
415
-
416
-
417
-
418
-
419
-
420
-
421
-
422
-
423
-
424
-
425
-
426
-
427
 |
 |
www.lexmark.com
May 2007
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries.
© 2007 Lexmark International, Inc.
740 West New Circle Road
Lexington, Kentucky 40550
Technical Reference