Lexmark 782e Clearing Jams Guide
Lexmark 782e - X Color Laser Manual
 |
UPC - 734646037174
View all Lexmark 782e manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark 782e manual content summary:
- Lexmark 782e | Clearing Jams Guide - Page 1
Lexmark™ X782 Clearing Jams Guide Clear Area A and Area D. Clear Area M. Clear the scanner. Area A 1 Release the levers on each side of door. Remove jams in the rollers under the image transfer unit. Area T1 1 Open tray 1. 2 Remove any jams paper from the printer. 3 Close the door. 4 Open Tray 1, - Lexmark 782e | Clearing Jams Guide - Page 2
and carefully remove any jammed pages. 2 Reinstall the duplex mechanism in the printer. Area T 1 Carefully duplex tray J. 2 Remove any jams, and then close the door. Area L 1 Open the upper right access door. 2 Remove jams from the rollers, and then close the door. 290, 291, 292, and 294 Scanner - Lexmark 782e | Clearing Jams Guide - Page 3
back onto the fuser. 9 Insert the fuser back into the printer. 10 Slide the latches out, and then pull up to refasten them. 11 Close the doors. 2 While holding down the front access door, insert a folded piece of paper as shown to clear the paper sensors under the image transfer unit. Make sure to - Lexmark 782e | Clearing Jams Guide - Page 4
unlock the image transfer unit. 8 Look inside the printer. Remove all torn paper or other jams. 5 Remove all the print cartridges. a Pull up slightly on the cartridge handhold. b Pull the cartridge straight out and use the handle to lift it off the guides. c Place the cartridges on a clean, flat - Lexmark 782e | Clearing Jams Guide - Page 5
the lever to lock the image transfer unit into place. 10 Return the multipurpose feeder to its working position. Reinstall all the print cartridges. 11 Close the printer door. 12 Turn the printer on. The printer returns to a Ready state. If you still need help 1 Turn the printer off and then back on
-
1 -
2 -
3 -
4 -
5
 |
 |
Lexmark⢠X782
Clearing Jams
Guide
Clearing jams
Understanding jam messages
Area A
1
Release the levers on each side of the
multipurpose feeder to lay it flat.
2
Press the pick assembly release lever, and
remove all media and jams.
3
Return the feeder to its working position, and
reload your paper.
Area B
1
Open the left access door until it clicks into
place.
2
Remove all visible paper. Remove any torn
paper from the printer.
3
Close the door.
4
Open Tray 1, and make sure the entire paper
stack is pushed all the way down into the tray.
Area C
1
Open the 500-sheet drawer access door. Hold
the door down while removing jams.
2
Make sure the entire paper stack is loaded
correctly, and then close the door.
Area D
1
Open the front access door.
2
Hold down the front access door. Remove jams
in the rollers under the image transfer unit.
Area T1
1
Open tray 1.
2
Remove any jams.
3
Make sure the paper is pushed all the way down
into the tray, and then close tray 1.
Message
What to do
200 Paper Jam
Clear
Area B
and
Area T1
.
201 Paper Jam
Clear
Area D
,
Area K
, and
Area L
.
202 Paper Jam
Clear
Area K
and
Area L
.
230 Paper Jam
Clear
Area E
and
Area J
.
24<x> Paper
Jam
Clear
Area B, Area C
, and
Area
T<x>
.
250 Paper Jam
Clear
Area A
and
Area D
.
27<x> Paper
Jam
Clear
Area M
.
29<x> Paper
Jam
Clear the
scanner
.