Lexmark 945e IPDS Printer and Host Setup Guide
Lexmark 945e - X Color Laser Manual
 |
UPC - 734646027373
View all Lexmark 945e manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark 945e manual content summary:
- Lexmark 945e | IPDS Printer and Host Setup Guide - Page 1
Lexmark Card for IPDS and SCS/TNe IPDS Printer and Host Setup Guide - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 2
Printer and Host Setup Guide Notices NOTICES Edition Notice Second Edition. October 2007, EC 20G429 Disclaimers The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK OS/2, OS/390, OS/400, Print Services Facility, PSF, System/390, zSeries, - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 3
and Host Setup Guide - Table of Contents TABLE OF CONTENTS Notices ...2 Table of Contents...3 Equipment Requirements and Specifications 4 Customer Support...5 1. AS/400 and iSeries LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server ...6 2. AS/400 and iSeries - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 4
Equipment Requirements And Specifications EQUIPMENT REQUIREMENTS AND SPECIFICATIONS This guide provides information to help you configure the host and printer to print IPDS jobs. The information in this guide applies to the following printers and Multifunction Products (MFPs). • Lexmark C770, C772 - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 5
IPDS Printer and Host Setup Guide Equipment Requirements And Specifications Customer Support If you cannot find answers in this guide about using the IPDS emulation, or require firmware updates, please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 6
for setting up the AS/400, or iSeries, and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 7
between APPC retries....... RETRYDLY 90 Acknowledgement frequency ACKFRQ 100 Printer response timer PRTRSPTMR *NOMAX Generate PDF output PDFGEN *NONE Text 'description TEXT > 'IPDS Printer' (Note: 'IPDS Printer' is user defined text.) Additional Parameters Automatic session recovery - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 8
to be captured before the host will send fonts which can be captured to the printer. Refer to the IPDS Emulation User's Guide for additional information on capturing fonts. Step 3 Create a Printer Device Description Note: Examples showing parameters displayed on an AS/400 may be different than - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 9
IPDS Printer and Host Setup Guide AS/400 and iSeries LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print PPRSRC2 *MFRTYPMDL Envelope source ENVELOPE *MFRTYPMDL ASCII code page 899 support........... ASCII899 *NO Maximum pending requests MAXPNDRQS 6 Print while - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 10
IPDS Printer and Host Setup Guide AS/400 and iSeries LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server Example CRTDEVPRT with parameters to change shown in bold. Library User defined driver program........... USRDRVPGM *NONE Library System driver program - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 11
you specified Port 9100 in the AS/400 device description, the printer's Network Job Timeout must be manually disabled by setting it to "0" (or to "Disable"). This is necessary to allow the host's Release Timer value or the printer's IPDS Timeout value to control when print jobs from another protocol - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 12
is "Auto". If you experience printing problems, set Host Resolution to "300". 4 If you are replacing a printer that used a 3812/3816 Emulation, select does not support DBCS printing. On MFPs, you can set the print priority of received faxes. Refer to the IPDS Emulation User's Guide for additional - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 13
be processed after the IPDS job is finished. Note 2: The supported printers and MFPs do not contain an Advanced Function Common Control Unit the printer. 6 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 8 Troubleshooting If - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 14
Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 7 Refer to Chapter 10. Printer Messages and Problems on page 54 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 14 - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 15
no MFPs support Twinax printing. The information below will lead you through the steps for setting up the AS/400, or iSeries, and the printer to print IPDS jobs over a direct Twinax connection using the optional Coax/Twinax Adapter for SCS. Refer to the IPDS User's Guide for detailed instructions on - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 16
IPDS Printer and Host Setup Guide AS/400 and iSeries Twinax Printing Using the Adapter for SCS 1 From a Ready state, on printers press the MENU button. 2 Use the navigation buttons or icons to scroll to Option Card Menu. 3 On printers, press the Select button . 4 Navigate to SCS MENU 1 (or SCS - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 17
". If you experience printing problems, set Host Resolution to "300". 4 If you are replacing a printer that used a 3812/3816 support DBCS printing. Refer to the IPDS Emulation User's Guide for information on these options and other IPDS MENU settings to format IPDS jobs. Note: The supported printers - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 18
IPDS Printer and Host Setup Guide AS/400 and iSeries Twinax Printing Using the Adapter for SCS Step 4 Modify the Auto-created Twinax Device Description or Use CRTDEVPRT to Create a Printer Device Description When you let the host auto-create your IPDS device, you will need to alter the following - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 19
Pages per minute black......... *UNKNOWN Pages per minute color......... *UNKNOWN Location *BLANK Data streams supported ........ *UNKNOWN Text 'Description TEXT > 'IPDS PRINTER' (Note: 'IPDS PRINTER' is user defined text.) Dependent location name...........DEPLOCNAME *NONE 19 - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 20
want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 6 Troubleshooting If the IPDS job does not print, try the following. 1 If BUSY is not displayed in the printer control panel or if the printer remains in Ready mode, check to be sure - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 21
Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 7 Refer to Chapter 10. Printer Messages and Problems on page 54 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 21 - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 22
the steps for setting up the MVS mainframe and printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 23
Troubleshooting Step 1 Choose a Printer Port for Printing IPDS Jobs Several printer ports are available for receiving IPDS jobs when using the printer print IPDS jobs, the printer's Network Job Timeout must be manually set to "0" (or to "Disable") and Job Buffering must be manually set to "OFF". - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 24
and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server Step 2 Define the printer to JES a) Example for JES2 FSS(FSS1) PRT7 PROC=PSFPROC,HASPFSSM=HASPFSSM FSS=FSS1,MODE=FSS, PRMODE=(LINE,PAGE,SOSI1,SOSI2), CLASS=C,UCS=0,SEP,NOSEPDS, - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 25
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server Example PSF STARTUP PROC - JCL and PRINTDEV. Example PSF STARTUP PROC // SAMPLE - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 26
Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 1 From a Ready state press the MENU button (printers) or touch (Menus on MFPs). 2 Use the navigation buttons or icons to scroll to Network/Ports. 3 Select Network/Ports. TIp: To do this on printers, press - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 27
the IPDS session if communication is delayed between the host and printer. Additional information on the printer IPDS Timeout value may be found in the IPDS Emulation User's Guide. Follow these steps to disable the printer's Network Job Timeout from the control panel: 1 Navigate to Network Job - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 28
problems, set Host Resolution to "300". 4 If you are replacing a printer or higher, "Copy Interrupt" is supported: an IPDS job can be interrupted printer. 4 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 8 Troubleshooting - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 29
Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 8 Refer to Chapter 10. Printer Messages and Problems on page 54 for additional problem solutions. 9 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 29 - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 30
that no MFPs support Coax printing. The information below will lead you through the steps for setting up the mainframe and printer to print IPDS jobs over a direct Coax connection using the optional Coax/Twinax Adapter for SCS. Refer to the IPDS User's Guide for detailed instructions on using the - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 31
to the Adapter for SCS, Coax/Twinax Connection, Installation and User's Guide which came with the adapter for a detailed description of other menu is "Auto". If you experience printing problems, set Host Resolution to "300". 3 If you are replacing a printer that used a 43xx Emulation setting, choose - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 32
problems, set Host Resolution to "300". 4 If you are replacing a printer that used a 3812/3816 Emulation, select the "3812/3816" Emulation. This emulation only accepts 240 dpi resources (fonts, overlays, etc.) from the host and does not support DBCS printing. Refer to the IPDS Emulation User's Guide - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 33
the host and printer, you are ready to print your first IPDS job. 1 Send an IPDS job from your host system. 2 Observe the printer control panel. When the first job data is received, BUSY should be displayed in the printer control panel. If the job does not print, go to Step 10 Troubleshooting. 33 - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 34
want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 10 Troubleshooting If the IPDS job does not print, try the following. 1 If BUSY is not displayed in the printer control panel or if the printer remains in Ready mode, check to be - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 35
through the steps for setting up PSF/2 and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or a MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 36
and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server How to find the Network Job Timeout Option (which is also known as End-of-Job Timeout) on the control panel: On printers, press MENU and then select Settings > Setup Menu > Timeouts > Network Job Timeout. On MFPs, touch - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 37
and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server 5001 Enter the IP address of the printer. The IP address should be obtained from your network administrator. Enter the TCP/IP port selected in Step 1. d) Select OK and then Create. The PSF/2 printer device is now created - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 38
and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server LAN IPDS Printer - Job Icon Note: You can check the connection using the PSF/2 Print Submitter. A number of AFP print files are delivered with the PSF/2 package. Any - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 39
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server the navigation buttons or icons to scroll to Network/Ports. 3 Select Network/Ports. TIp: To do this on printers, press the Select button ; on MFPs just touch Network/Ports. 4 Now you will see a list of menus - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 40
! If you specified Port 9100 as the TCP/IP port number, the printer's Network Job Timeout must be manually disabled by setting it to "0" (or to "Disable"). This is necessary to allow the host's Release Timer value or the printer's IPDS Timeout value to control when print jobs from another protocol - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 41
is "Auto". If you experience printing problems, set Host Resolution to "300". 4 If you are replacing a printer that used a 3812/3816 Emulation, select does not support DBCS printing. On MFPs, you can set the print priority of received faxes. Refer to the IPDS Emulation User's Guide for additional - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 42
by the Release Timer on the host or by the IPDS Timeout on the printer. 4 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 8 Troubleshooting If the IPDS job does not print, try the following. 1 If BUSY is not - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 43
and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server 7 Refer to Chapter 10. Printer Messages and Problems on page 54 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 43 - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 44
through the steps for setting up PSF/AIX and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 45
to queue the job. See also the Installing a TCP/IP-attached IPDS printer in the IBM AIX Print Service Facility/6000: Print Administration Version 1.2 manual for further information about this task. Step 3 Configure the Printer's Print Server TCP/IP Settings To enable IPDS printing with a Standard - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 46
and Host Setup Guide PSF/AIX LAN Printing Using an Internal LAN Print Server 3 Select Network/Ports. TIp: To do this on printers, press the Select button configure TCP/IP communication. TCP/IP Settings Parameter Value Activate On (Printers: Must be "On" to enable TCP/IP communi- cations. - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 47
printer. Additional information on the printer IPDS Timeout value may be found in the IPDS Emulation User's Guide. Follow these steps to disable the printer "Auto". If you experience printing problems, set Host Resolution to "300". 3 If you are replacing a printer that used a 43xx Emulation setting, - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 48
be processed after the IPDS job is finished. Note 2: The supported printers and MFPs do not contain an Advanced Function Common Control Unit the printer. 4 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 49
Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 7 Refer to Chapter 10. Printer Messages and Problems on page 54 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 49 - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 50
Host Setup Guide Printer and Host Timeout Values 7. Printer and Host Timeout Values Selecting compatible values of the printer IPDS Timeout value and host release timers is very important when printing IPDS jobs. Selection of some values will cause communication problems between the printer and the - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 51
Setup Guide Printer and Host Timeout Values MVS and Printer Timeout Values Printer IPDS Timeout Host Controlled 15 sec to 10 Min STARTUP PROC STARTUP PROC Note Disconnect Interval (DISCINTV) Valid Port Number (PORTNO) Specific Number of Seconds 5001, 9100, 9600 1 0 None 2 Specific Number - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 52
supported on your printer for printing IPDS jobs. D = supported U = not supported Printer or MFP Port 5001 Port 9100 Port 9600 Lexmark C770, C772 D D D Lexmark C780, C782 D D D Lexmark C920 D D D Lexmark C935 D D D Lexmark T640, T642, T644 D D D Lexmark W840 D D D Lexmark - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 53
Setup Guide Coax/Twinax Adapter for SCS Support 9. Coax/Twinax Adapter for SCS Support The table below shows the printers which support the Coax/Twinax Adapter for SCS. D = supported (see note) U = not supported Printer or MFP Lexmark C770, C772 Lexmark C780, C782 Lexmark C920 Lexmark C935 Lexmark - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 54
Setup Guide Printer Messages and Problems 10. Printer Messages and Problems Review these problems and solutions for possible answers to your questions. Use the table below if you are searching for information on a printer message or for keywords for a problem. Message (bold) or Problem Problem - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 55
session, follow the steps below to correct the problem. 1 Disable the printer's Network Job Timeout by setting it to 0. For instructions on how to do this, see the "Configure the Printer's Network Job Timeout" step in the chapter in this guide that describes your host environment. 2 Change the host - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 56
out, follow the steps below to correct the problem. 1 Disable the printer's Network Job Timeout by setting it to 0. For instructions on how to do this, see the "Configure the Printer's Network Job Timeout" step in the chapter in this guide that describes your host environment. 2 Change the host - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 57
information on the minimum recommended installed memory for various printing requirements on each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. Problem 4: Memory Full; 38I Memory Full Sometimes the message 38I Memory Full or - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 58
on each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. C. If IPDS job is sent from the host new IPDS resources are downloaded to the printer. Problem 5: Menu Choices for Adapter for SCS I am using the Card for IPDS - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 59
IPDS Printer and Host Setup Guide Printer Messages and Problems each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. Problem 7: Remote output queue (name clash) I'm trying to set up a remote printer with the Standard Network - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 60
For information on the minimum recommended installed memory for various printing requirements on each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. Problem 14: 1565 EMUL ERROR LOAD EMUL OPTION 1565 EMUL ERROR LOAD EMUL OPTION - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 61
and Host Setup Guide Printer Messages and Problems Problem 15: Update Option Card Firmware Update Option Card Firmware appears on the display. Solution to Problem 15 This message indicates that the IPDS/SCS/TNe or printer firmware on the option card must be updated. See the section on support (page - Lexmark 945e | IPDS Printer and Host Setup Guide - Page 62
Guide Printer Messages and Problems Solution to Problem 18 An IPDS session is active with the host. End the session to print the IPDS fonts page. For more information, refer to the section Print IPDS Fonts in the IPDS Emulation User's Guide. Problem . On printers, select > Yes. Problem 21: 55
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
 |
 |
Lexmark
Card for IPDS and SCS/TNe
IPDS Printer and Host Setup Guide