Lexmark C530 Quick Reference
Lexmark C530 Manual
 |
View all Lexmark C530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark C530 manual content summary:
- Lexmark C530 | Quick Reference - Page 1
paper loading prevents jams and facilitates trouble-free printing. Do not remove trays while a job prints or while Busy blinks on the display. Doing so may cause a jam. 1 Grasp the handle and pull the tray out. Remove the tray completely. 2 Squeeze the width guide tabs together as shown, and move - Lexmark C530 | Quick Reference - Page 2
the 550-sheet tray is loaded for the first time or when a new size is loaded, remove the tray completely from the support unit. 1 Width guide tabs 2 Size indicators 3 Length guide tabs 4 Size indicators Note: If the same paper size is loaded again, the tray does not need to be completely removed - Lexmark C530 | Quick Reference - Page 3
Stack height limiter 2 Size indicators 3 Width guide 4 Tab 6 Load the paper, and then adjust the width guide to lightly touch the edge of the paper coated linings, or self-stick adhesives. These envelopes may severely damage the printer. 7 Make sure the paper is as far into the multipurpose feeder - Lexmark C530 | Quick Reference - Page 4
and approved for use with the printer. For more information, see the Lexmark Web site at www.lexmark.com. Notes: • USB devices must be compatible with the USB 2.0 standard. • Hi-Speed USB devices must support the Full-Speed standard as well. Devices only supporting USB low-speed capabilities are not - Lexmark C530 | Quick Reference - Page 5
USB flash memory device from the USB Direct interface until the document has finished printing. If you leave the USB flash memory device in the printer after leaving the initial USB menu screen, you can still print PDFs from the USB flash memory device as held jobs. Canceling a print job from
-
1 -
2 -
3 -
4 -
5
 |
 |
Lexmark⢠C53x
Quick Reference
Loading paper and
specialty media
Loading the standard tray
The printer has two trays to select from: the standard tray (Tray 1),
also known as the 250-sheet tray, and the optional 550-sheet tray
(Tray 2). Load the paper or specialty media used for the majority
of print jobs in Tray 1. Proper paper loading prevents jams and
facilitates trouble-free printing.
Do not remove trays while a job prints or while
Busy
blinks on the
display. Doing so may cause a jam.
1
Grasp the handle and pull the tray out. Remove the tray
completely.
2
Squeeze the width guide tabs together as shown, and move
the width guide to the side of the tray.
3
Squeeze the length guide tabs together as shown, and slide
the length guide to the correct position for the size of paper
being loaded. Notice the size indicators in the window in the
bottom of the tray. Use these indicators to help position the
guide. Notice the load lines on the width guide tab: they
indicate the maximum height for loading paper.
1
Load lines
2
Length indicator
4
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges on
a level surface.
5
Load the paper stack with the recommended print side faceup.
Load the stack toward the back of the tray as shown.
When loading preprinted letterhead, place the header toward
the front of the tray.
6
Squeeze the width guide tabs, and slide the width guide to
lightly touch the side of the stack.
1