Lexmark C746 Printing Guide
Lexmark C746 Manual
 |
View all Lexmark C746 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark C746 manual content summary:
- Lexmark C746 | Printing Guide - Page 1
Printing guide Page 1 of 4 Printing guide Get the most from the printer by properly loading the trays and properly setting the types and sizes of media. Loading the standard or optional 550‑sheet tray The printer has one standard 550‑sheet tray (Tray 1) and may have up to three optional 550‑sheet - Lexmark C746 | Printing Guide - Page 2
Printing guide Page 2 of 4 3 Squeeze and slide the length guide to the correct position for the paper size you are loading. Notes: • For some paper sizes like letter, legal, and A4, squeeze and slide the length guide backward to accommodate their length. • The length guide has a locking device. To - Lexmark C746 | Printing Guide - Page 3
printing LETTERHEAD LETTERHEAD Note: Make sure paper does not exceed the maximum fill indicator located on the left side of the tray. Warning-Potential Damage: Overloading the tray can cause paper jams and possible printer damage. 6 Insert the tray. Note: For some paper sizes, the tray will - Lexmark C746 | Printing Guide - Page 4
Printing guide Page 4 of 4 Setting the paper size and type 1 From the printer control panel, navigate to: > Settings > > Paper Menu > > Paper Size/Type > 2 Press the up or down arrow button to select the paper tray or down arrow button to select the paper type, and then press to change the settings.
-
1 -
2 -
3 -
4
 |
 |
Printing guide
Get the most from the printer by properly loading the trays and properly setting the types and sizes of media.
Loading the standard or optional 550
‑
sheet tray
The printer has one standard 550
‑
sheet tray (Tray 1) and may have up to three optional 550
‑
sheet trays. All 550
‑
sheet trays
support the same paper sizes and types.
CAUTION—POTENTIAL INJURY:
To reduce the risk of equipment instability, load each paper drawer or tray separately.
Keep all other drawers or trays closed until needed.
1
Pull the tray completely out.
Notes:
•
Do not remove trays while a job prints or while
Busy
appears on the printer display. Doing so may cause a jam.
•
The standard 550
‑
sheet tray (Tray 1) does not automatically detect the paper size.
2
Squeeze and slide the width guide to the correct position for the paper size you are loading.
Notes:
•
Use the paper size indicators at the bottom of the tray to help position the length and width guides.
•
Incorrect positioning of the width guide can cause paper jams.
Printing guide
Page 1 of 4