Lexmark C770 Quick Reference

Lexmark C770 Manual

Get Lexmark C770 PDF manuals and user guides View all Lexmark C770 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark C770 manual content summary:

  • Lexmark C770 | Quick Reference - Page 1
    the bottom support toward the front of the tray until it touches the front guide. 3 Squeeze the side guide lever and slide the guide to the is pushed completely into the printer. Loading the 2000-sheet tray 1 Pull open the tray. 2 Squeeze the side guide lever, lift the guide, and place it into
  • Lexmark C770 | Quick Reference - Page 2
    stack height. Overfilling the feeder may cause jams. 6 Squeeze the paper guide lever and slide the guide until it lightly touches the side of the stack. 7 Close the tray. Make sure the tray is pushed completely into the printer. Do not exceed the maximum stack height. Overfilling the tray may cause
  • Lexmark C770 | Quick Reference - Page 3
    Print. 3 Verify that the correct printer is selected in the dialog box. 4 Modify the printer settings as appropriate (such as the pages you want to print or the number of copies). Note: Click Properties or Setup to adjust printer settings not available from the first screen, and click OK. 5 Click OK
  • Lexmark C770 | Quick Reference - Page 4
    all the way down into the tray, and then close tray 1. Area E 1 Pull the duplex tray E completely out. Remove any paper caught in the rollers or inside the printer. 2 Remove any jams, and then reinstall the tray. Area K 1 Open the lower right access door. 2 Remove any jams, and then close the door
  • 1
  • 2
  • 3
  • 4
Lexmark™ C77x
Quick Reference
Loading paper and
specialty media
Loading 500-sheet trays
1
Remove the tray and place it on a flat, level
surface.
2
Squeeze the front guide lever and slide the
guide to the front of the tray.
3
Squeeze the side guide lever and slide the
guide to the correct position for the size paper
you are loading. Icons along the back of the tray
indicate paper sizes.
4
Flex the sheets back and forth to loosen them,
and then fan them. Do not fold or crease the
paper. Straighten the edges of the stack on a
level surface.
5
Place the paper in the tray as shown, print side
down.Do not load bent or wrinkled paper.
6
Squeeze the front guide lever and slide the
guide until it firmly touches the stack of paper.
7
Reinstall the tray.
8
Make sure the tray is pushed completely into
the printer.
Loading the 2000-sheet tray
1
Pull open the tray.
2
Squeeze the side guide lever, lift the guide, and
place it into the appropriate slot for the size
paper you are loading.
3
Squeeze the two front guide levers and slide the
guide to the correct position for the size paper
you are loading.
4
Slide the bottom support toward the front of the
tray until it touches the front guide.
5
Flex the sheets back and forth to loosen them,
and then fan them.
Do not fold or crease the paper. Straighten the
edges of the stack on a level surface.
6
Place the paper against the back left corner of
the tray, print side down.
Maximum stack height
indicator
LT.LG
LT.LG
EX
EX
A4
A4
B5
B5
A5
A5