Lexmark C772 User's Guide

Lexmark C772 Manual

Get Lexmark C772 PDF manuals and user guides View all Lexmark C772 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark C772 manual content summary:

  • Lexmark C772 | User's Guide - Page 1
    C770, C772 User's Guide October 2007 Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. © 2006 Lexmark International, Inc. 740 West New Circle Road Lexington, Kentucky 40550
  • Lexmark C772 | User's Guide - Page 2
    as the power cord or telephone, during a lightning storm. • Refer service or repairs, other than those described in the operating instructions, to a professional service person. • This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark
  • Lexmark C772 | User's Guide - Page 3
    40 Tips for successful printing ...44 Chapter 3: Media specifications 46 Media guidelines ...46 Storing paper ...48 Storing media ...52 Identifying media sources and specifications 52 Chapter 4: Maintaining the printer 58 Determining the status of supplies ...58 Conserving supplies ...59 Ordering
  • Lexmark C772 | User's Guide - Page 4
    Contents Print cartridges ...59 Toner waste container ...60 Fuser and ITU ...60 Recycling Lexmark products ...61 Chapter 5: Clearing paper jams 62 Identifying jams ...62 Access doors and trays ...63 Understanding jam messages ...64 Clearing the entire paper path ...65 Clearing mailbox, finisher, or
  • Lexmark C772 | User's Guide - Page 5
    • Duplex unit Output options • Output expander • 5-bin mailbox • StapleSmart finisher Internal options • Memory cards - Printer memory - Flash memory - Fonts • Firmware cards - Bar Code - IPDS and SCS/TNe - PrintCryption™ Note: Use a Phillips screwdriver to remove the system board access cover
  • Lexmark C772 | User's Guide - Page 6
    - MarkNet™ N8000 Series internal print servers (also called internal network adapters or INAs) Note: Some options may not be available on some models. Installing a 2000-sheet drawer Your printer supports one optional 2000-sheet drawer. Warning: If you have an optional duplex unit and a 2000-sheet
  • Lexmark C772 | User's Guide - Page 7
    printer supports up to three additional 500-sheet drawers. However, if you install a 2000-sheet drawer, you can only add one additional 500-sheet drawer. Warning: If you have an optional duplex unit 3 If you are installing a 500-sheet drawer on top of a 2000-sheet drawer, secure the drawers with
  • Lexmark C772 | User's Guide - Page 8
    removing options Installing a duplex unit Your printer supports an optional duplex unit that lets you print on both sides of a sheet of paper. Warning: If you have an optional duplex unit and a 2000-sheet drawer, you must install a 500-sheet drawer between the duplex unit and the 2000-sheet drawer
  • Lexmark C772 | User's Guide - Page 9
    could damage tabletops or fabrics. 1 Unpack the output expander and remove any packing material. 2 Remove the printer top cover. Warning: The output expander tray is designed to hold the weight of print material only. Do not use it as a shelf; excess weight may cause it to disengage from the
  • Lexmark C772 | User's Guide - Page 10
    Installing and removing options 5 Attach the printer top cover to the output expander. 6 Attach the output expander paper bail to the top cover. Installing an output expander 10
  • Lexmark C772 | User's Guide - Page 11
    and removing options Installing a 5-bin mailbox Your printer supports a 5-bin mailbox that lets you collate and stack the mailbox and remove any packing material. 2 Remove the printer top cover. Warning: The mailbox is designed to hold the weight of print material only. Do not use it as a shelf;
  • Lexmark C772 | User's Guide - Page 12
    5 Attach the printer top cover to the mailbox. 6 Attach the mailbox paper bail to the top cover. Installing a StapleSmart finisher Your printer supports a StapleSmart finisher. See the information sheet included with the finisher for detailed installation instructions. Installing a StapleSmart
  • Lexmark C772 | User's Guide - Page 13
    Hard disk connector Installing a memory card Follow the instructions in this section to install a printer memory card. Memory cards must have 100-pin connectors. Note: Memory cards designed for other Lexmark printers may not work with your printer. 1 Remove the system board access cover. For more
  • Lexmark C772 | User's Guide - Page 14
    memory cards offered for other Lexmark printers cannot be used with your printer. Only one of each type of card is supported. Warning: Firmware and flash memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card. 1 Remove the system board
  • Lexmark C772 | User's Guide - Page 15
    disk to the mounting plate. Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before you touch a disk. If an option card has been installed, you may need to remove it before installing the hard disk. 1 Remove the system board access cover. For more
  • Lexmark C772 | User's Guide - Page 16
    plate into the holes on the system board. The hard disk snaps into place. Installing an option card Your printer has one expansion card slot that supports a number of option cards. The following table describes their function. Card MarkNet internal print server Parallel 1284-B Interface Card
  • Lexmark C772 | User's Guide - Page 17
    Installing and removing options Connector Installing memory and option cards 17
  • Lexmark C772 | User's Guide - Page 18
    to remove. Option card connector Firmware and flash memory card connectors Memory card connector Hard disk connector Accessing the printer system board 1 Turn the printer off. 2 Unplug the printer power cord. 3 Disconnect all cables from the back of the printer. 4 Locate the access cover on the
  • Lexmark C772 | User's Guide - Page 19
    flash memory cards. Warning: Printer memory and flash memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a memory card. 1 Remove the system board access cover. For more information, see Accessing the printer system board. 2 Locate the memory
  • Lexmark C772 | User's Guide - Page 20
    secure the other end of the metal plate to the system board. 6 Place the card in its original packaging, or wrap the card in paper and store it in a box. 7 Replace the system board access cover. For more information, see Reinstalling the system board access cover. Removing memory and option cards 20
  • Lexmark C772 | User's Guide - Page 21
    and removing options Removing a hard disk Warning: Hard disks are easily damaged by static electricity. Touch something metal on the printer before you touch a disk. 1 Remove the system board access cover. For more information, see Accessing the printer system board. 2 Locate the hard disk. 3 Gently
  • Lexmark C772 | User's Guide - Page 22
    a firmware card Warning: Optional firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch an optional firmware card. 1 Remove the system board access cover. For more information, see Accessing the printer system board. 2 Grasp the firmware card
  • Lexmark C772 | User's Guide - Page 23
    under the top cover lip as far as it will go, and then tighten the screws at the top of the cover. 3 Insert and tighten the four screws to the bottom of the cover. 4 Reconnect all cables on the back of the printer. 5 Plug in the printer power cord. 6 Turn the printer on. Removing memory and option
  • Lexmark C772 | User's Guide - Page 24
    2 Printing Understanding the printer operator panel The printer operator panel has a four-line, back lit, gray scale display that can show both graphics and text. The Back, Menu, and Stop buttons are located to the left of the display, the navigation buttons are located below the display, and the
  • Lexmark C772 | User's Guide - Page 25
    USB Direct interface on the operator panel is used to plug in a USB flash memory device and print PDF and supported graphic files (.gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, and .dcx files). Note: A USB port is located on the back of the printer to connect a host computer. Understanding the
  • Lexmark C772 | User's Guide - Page 26
    state of the printer and indicating possible printer problems you must resolve. The top line of the display is the header line. If applicable, it will contain the graphic indicating the Back button can be used. It will also display the current status and the Supplies (Warnings) status. If multiple
  • Lexmark C772 | User's Guide - Page 27
    low speed capabilities are not supported. • USB devices must support the FAT file system. Devices formatted with NTFS or any other file system are not supported. • You cannot print encrypted files or files without printing permissions. To print from a USB flash memory device: 1 Make sure the printer
  • Lexmark C772 | User's Guide - Page 28
    one copy, press , or manually input the number of copies with the number pad, then press . Note: Do not remove the USB flash memory device from the USB Direct interface until the document has finished printing. The document prints. If you leave the drive in the printer after leaving the initial USB
  • Lexmark C772 | User's Guide - Page 29
    computer running Mac OS 9.x When you send a job to print, the printer icon for your selected printer appears on the desktop. 1 Double-click the printer icon on your desktop. A list of print jobs appears in the printer window. 2 Select the print job you want to cancel. 3 Click the trash can icon
  • Lexmark C772 | User's Guide - Page 30
    Consult a system support person for a solution, and print another network setup page to verify that the printer is connected to the network. Printing a font sample list To print samples of the fonts currently available for your printer: 1 Make sure the printer is on and the Ready message appears
  • Lexmark C772 | User's Guide - Page 31
    forth to loosen the sheets, and then fan them. Do not fold or crease the print media. Straighten the edges of the stack on a level surface. Warning: Never remove paper trays while a print job is printing. It could damage the tray or the printer. Loading 500-sheet trays To load any of the 500-sheet
  • Lexmark C772 | User's Guide - Page 32
    stack height. Overfilling the tray may cause jams. 6 Squeeze the front guide lever and slide the guide until it firmly touches the stack of paper. 7 Reinstall the tray. Make sure the tray is pushed completely into the printer. 8 If you are loading a different type of media than was previously
  • Lexmark C772 | User's Guide - Page 33
    Loading the 2000-sheet tray Follow these instructions to load a 2000-sheet tray. Do not load any print media other than paper in the 2000-sheet tray. 1 Pull open the tray. 2 Squeeze the side guide lever, lift the guide, and place it into the appropriate slot for the size paper you are loading
  • Lexmark C772 | User's Guide - Page 34
    Printing 4 Slide the bottom support toward the front of the tray until it touches the front guide. 5 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges of the stack on a level surface. 6 Place the paper against the back left corner
  • Lexmark C772 | User's Guide - Page 35
    feeder: 1 Open the multipurpose feeder. 2 Squeeze the paper guide lever and slide the guide all the way toward the front of the printer. 3 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the print media. Straighten the edges of the stack on a level surface
  • Lexmark C772 | User's Guide - Page 36
    or specialty media, print side up, along the left side of the multipurpose feeder, and then push it in as far as it will easily go. Do not force the media. Note: Do not exceed the maximum stack height. Overfilling the feeder may cause jams. 6 Squeeze the paper guide lever and slide the
  • Lexmark C772 | User's Guide - Page 37
    you loaded. Windows 1 In your word processor, spreadsheet, browser, or other application, select File Print. 2 Click Properties (or Options, Printer, or Setup, depending on the application) to view the printer driver settings. 3 Click the Paper tab, and then select the tray containing the specialty
  • Lexmark C772 | User's Guide - Page 38
    up menu. 8 Send your print job as usual. Mac OS X 1 In your word processor, spreadsheet, browser, or other application, select File Page Setup. 2 Choose the correct printer in the Format For pop- more information, see the Menus and Messages Guide on the Software and Documentation CD Linking trays 38
  • Lexmark C772 | User's Guide - Page 39
    of media to specific output bins or a set of linked bins. The printer then sends all printed media to the bin printer When sending a job to the printer, you can specify in the driver that you want the printer to hold the job in memory. When you are ready to print the job, you must go to the printer
  • Lexmark C772 | User's Guide - Page 40
    the job without the PIN. Windows 1 From a word processor, spreadsheet, browser, or other application, select File Æ Print. 2 Click Properties. (or Options, Printer, or Setup, depending on the application) to view the printer driver settings. 3 Depending on the operating system, you may have to click
  • Lexmark C772 | User's Guide - Page 41
    job you want to print, and then press . After your job prints, it is deleted from printer memory. Entering a personal identification number (PIN) When you select Confidential Job from the Held job menu, the following prompt appears on the display after you select your user name: Enter PIN * 1 Use
  • Lexmark C772 | User's Guide - Page 42
    extra memory to process additional held jobs. Windows 1 From a word processor, spreadsheet, browser, or other application, select File Æ Print. 2 Click Properties. (or Options, Printer, or Setup, depending on the application) to view the printer driver settings. 3 Depending on the operating system
  • Lexmark C772 | User's Guide - Page 43
    to the type of action you want to perform: Print All JobName1 JobName2 Delete All • Confidential jobs will also be an option if confidential jobs are present. 4 Press . 5 Press until appears next to the job you want, and then press . The job will print or be deleted according to the type of
  • Lexmark C772 | User's Guide - Page 44
    the following guidelines to avoid paper feeding problems and uneven print quality. • Store paper in an top of paper packages. • Store paper in its original wrapper until you load it into the printer. Storing supplies Choose a cool, clean storage area for your printer supplies. Store supplies
  • Lexmark C772 | User's Guide - Page 45
    Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications for more information about which paper provides optimum results for your printing environment. • Do not remove paper trays while a job is printing. Wait for a Load Tray or Ready message before you remove
  • Lexmark C772 | User's Guide - Page 46
    We recommend Lexmark part number 12A5950 letter size glossy paper and Lexmark part number 12A5951 A4 size glossy paper. Always print several samples before buying large quantities of any type of media. When choosing any media, consider the weight, fiber content, and color. The Laser printing process
  • Lexmark C772 | User's Guide - Page 47
    specifications Weight The printer printing and can cause feeding problems. Smoothness The degree of smoothness of paper directly affects print quality. If the paper is too rough, the toner in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton possesses
  • Lexmark C772 | User's Guide - Page 48
    curled papers • Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19 309 • Paper having a weight less than 60 g/m2 (16 lb) • Multiple-part forms or documents Selecting paper Proper paper loading helps prevent jams and ensures trouble-free printing. To help avoid jams
  • Lexmark C772 | User's Guide - Page 49
    buying large quantities. When printing on transparencies: • Be sure to set the Paper Type to Transparency from the printer driver, MarkVision™ Professional, or the operator panel to avoid damaging the printer. • Use transparencies designed specifically for laser printers. Transparencies must be able
  • Lexmark C772 | User's Guide - Page 50
    for use in laser printers. Print quality and durability depend on the transparency used. Always print samples on the transparencies being considered for use before buying large quantities. Lexmark recommends Lexmark Part Number 12A8240 letter size transparency and Lexmark Part Number 12A8241 A4 size
  • Lexmark C772 | User's Guide - Page 51
    , see the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com/publications. When printing on labels: • Set the Paper Type menu item to Labels in the Paper Menu. Set the Paper Type from the printer operator panel, the printer driver, or from MarkVision Professional. • Do
  • Lexmark C772 | User's Guide - Page 52
    panel, the printer driver, or from MarkVision Professional. Use Heavy for card stock weighing more than or heavier than 163 g/m2 (90 lb). • Be aware that preprinting, perforation, and creasing can significantly affect the print quality and cause media handling or jamming problems. • Avoid using
  • Lexmark C772 | User's Guide - Page 53
    Media specifications 500-sheet trays Multi-purpose feeder Optional high capacity feeder Optional duplex unit Optional envelope drawer Optional banner tray Optional 5-bin mailbox Standard Offset Staple Media sizes and support Legend 3 - supported with size sensing † - supported without size
  • Lexmark C772 | User's Guide - Page 54
    high capacity feeder Optional duplex unit Optional envelope drawer Optional banner tray Optional 5-bin mailbox Standard Offset Staple Media specifications Media sizes and support (continued) Legend 3 - supported with size sensing † - supported without size sensing* 8- unsupported Optional
  • Lexmark C772 | User's Guide - Page 55
    ) 199 g/m2 (110 lb) Not recommended Not supported 203 g/m2 (125 lb) 203 g/m2 (125 lb) Not supported Not supported Cover 216 g/m2 (80 lb) 216 g/m2 (80 lb) Not supported Not supported Transparencies2 Laser printer 161 to 169 g/m2 161 to 169 g/m2 Not supported (43 to 45lb bond) (43 to 45lb bond
  • Lexmark C772 | User's Guide - Page 56
    lb) 203 g/m2 (125 lb) 203 g/m2 (125 Not supported lb) Cover 216 g/m2 (80 lb) Not supported 216 g/m2 (80 216 g/m2 (80 Not supported lb) lb) Transparencies2 Laser printer 161 to 169 g/m2 (43 to 45lb bond)4,5 Not supported 161 to 169 g/ 161 to 169 g/ m2 m2 (43 to 45lb bond)4,5 (43
  • Lexmark C772 | User's Guide - Page 57
    paper 8 8 8 8 50 * Based on 20 lb paper. ** Capacity will vary depending on weight and type of media. ***If you print large quantities of labels or other glossy print media, have your fuser housing replaced with a web oiler field upgrade kit. Identifying media sources and specifications 57
  • Lexmark C772 | User's Guide - Page 58
    want to designate a key operator to do the setup and maintenance of your printer. Refer printing problems and maintenance tasks to this key operator. In the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark Authorized Supplies Dealers in your area. In other countries or regions
  • Lexmark C772 | User's Guide - Page 59
    printer Conserving supplies Several settings in your application software or on the display let you conserve toner and paper. For more information on changing these settings, see the Menus and Messages Guide. Supply Toner Color toner Print media Menu selection item What the setting does Toner
  • Lexmark C772 | User's Guide - Page 60
    fuser if an authorized servicer has installed a web oiler upgrade kit to allow your printer to print large quantities of vinyl or dual web labels. Type of fuser Standard fuser or web oiler fuser Printer voltage 100 V (Japan) 115 V 220 V Part number 40X1667 40X1651 40X1666 Toner waste container
  • Lexmark C772 | User's Guide - Page 61
    roller When the 83.yy ITU life warning message appears on the display, you should order a new image transfer unit. Use part number 40X1680 to order an image transfer unit. For more information about warning messages, see the Menus and Messages Guide on the publications CD Ordering staple cartridges
  • Lexmark C772 | User's Guide - Page 62
    appropriate jam message will be displayed on the printer operator panel. If you select Show areas on the operator panel, you can view one or more images to help you clear the jam. 23.13 Paper jam, 2 pages jammed Continue Show areas Show areas Show duplex Show rear door 1. Open manual feed door
  • Lexmark C772 | User's Guide - Page 63
    areas where jams can occur. Area A Multipurpose feeder 250.yy Paper Jam Area B Left access door (beside tray 1) 200.yy Paper Jam 24.yy Paper Jam Area C Paper Paper Jam 202.yy Paper Jam Area K Lower right access door (fuser area) 201.yy Paper Jam 202.yy Paper Jam Area J Duplex tray 230.yy Paper
  • Lexmark C772 | User's Guide - Page 64
    caught in the image transfer unit. For instructions, see Clearing image transfer unit jams. Follow the instructions for clearing Area D, Area K, and Area L. If the jam message persists, paper may be caught in the fuser. For instructions, see Clearing fuser jams. Follow the instructions for clearing
  • Lexmark C772 | User's Guide - Page 65
    stops operating and displays 2.yy Paper Jam and a message to clear certain printer areas. After you have cleared the following areas, make sure all printer covers, doors, and trays are closed, and then press Go to resume printing. Note: The printer also displays Pages Jammed. Be sure to
  • Lexmark C772 | User's Guide - Page 66
    -sheet drawer access door. Pull the jam down and out of the rollers. b Close the door. Area D 1 Open the front access door. 2 Hold down the front access door. Remove jams in the rollers under the image transfer unit. Note: Any image printed will not be fused to the page. Clearing the entire paper
  • Lexmark C772 | User's Guide - Page 67
    E 1 Pull the duplex tray E completely out. Look inside and remove any paper caught in the rollers. Also, look up inside, as some jams may be above the rollers. 2 Reinstall the duplex mechanism in the printer. Area T 1 If you cannot clear all the 500-sheet drawer jams from Area C: a Carefully open
  • Lexmark C772 | User's Guide - Page 68
    K 1 Open the lower right access door. 2 Remove any jams, and then close the door. Area L 1 Open the upper right access door. 2 Remove jams from the rollers, and then close the door. Clearing the entire paper path 68
  • Lexmark C772 | User's Guide - Page 69
    1 Open the rear door of the 5-bin mailbox or ouput expander. 2 Pull the jam straight out, and then close the door. Clearing fuser jams 1 Clear the paper path. If the jam error message persists, go to step 2. 2 Open both the upper right and the lower right access doors (Areas K and L). CAUTION: The
  • Lexmark C772 | User's Guide - Page 70
    clean, flat surface. 5 Unsnap the housing and set it aside. 6 Lift up the fuser roller cover and remove the jam. 7 Close the fuser roller cover. 8 Snap the housing back onto the fuser. 9 Insert the fuser back into the printer. 10 Slide the latches out, and then pull up to refasten them. 11 Close the
  • Lexmark C772 | User's Guide - Page 71
    Clearing paper jams Clearing image transfer unit jams 1 Open the front access door and the left access door. 2 While holding down the front access door, insert a folded piece of paper as shown to clear the paper sensors under the image transfer unit. Make sure to clear the entire width of the paper
  • Lexmark C772 | User's Guide - Page 72
    the printer off. Open the front cover. 5 Remove all the print cartridges. a Pull up slightly on the cartridge handhold. b Pull the cartridge straight out and use the handle to lift it off the guides. c Place the cartridges on a clean, flat surface out of direct light. Clearing image transfer unit
  • Lexmark C772 | User's Guide - Page 73
    Clearing paper jams 6 Release the latches to open the multipurpose feeder (area A) all the way. Clearing image transfer unit jams 73
  • Lexmark C772 | User's Guide - Page 74
    Clearing paper jams 7 Remove the image transfer unit. a Raise the lever to unlock the image transfer unit. b Pull down on the handle. Clearing image transfer unit jams 74
  • Lexmark C772 | User's Guide - Page 75
    Clearing paper jams c Slide the image transfer unit out and place it on a clean, flat surface. Warning: Do not touch the transfer belt. Touching the belt will damage the image transfer unit. 8 Look inside the printer. Remove all torn paper or other jams. Clearing image transfer unit jams 75
  • Lexmark C772 | User's Guide - Page 76
    Clearing paper jams 9 Insert the image transfer unit back into the printer. a Align the guides with the insertion grooves and gently slide the unit in. b Rotate the handle up, and push gently to lock the unit in place. Clearing image transfer unit jams 76
  • Lexmark C772 | User's Guide - Page 77
    Clearing paper jams c Lower the lever to lock the image transfer unit into place. 10 Return the multipurpose feeder to its working position. Reinstall all the print cartridges. 11 Close the printer door. 12 Turn the printer on. The printer returns to a Ready state. If you still need help 1 Turn the
  • Lexmark C772 | User's Guide - Page 78
    Messages Guide. The LCD Brightness and LCD Contrast settings are adjusted separately. To change the LCD Brightness or LCD Contrast settings: 1 Make sure your printer new user default and the printer returns to Ready. Disabling operator panel menus Since many people could be using the printer, an
  • Lexmark C772 | User's Guide - Page 79
    it as the current user default setting. These settings are active until new ones are stored or the factory defaults are restored. To restore the original printer factory default settings: Warning: All downloaded resources (fonts, macros, and symbol sets) in printer memory (RAM) will be deleted
  • Lexmark C772 | User's Guide - Page 80
    Press until Setup Menu appears, and then press . 5 Press until Power Saver appears, and then press . 6 Using the right and left arrows on the operator panel, enter the number of minutes for the printer to wait before entering Power Saver. The settings available range from 1-240 minutes. 7 Press
  • Lexmark C772 | User's Guide - Page 81
    system password Setting the system password protects configuration of the Embedded Web Server. A system for secure connections to the Web server within the print device. You can connect to the Embedded Web Server printer you want to configure using the format: https: //ip_address/. Supporting SNMPv3
  • Lexmark C772 | User's Guide - Page 82
    click Network/Ports. 4 Click IPSec. Two types of authentication are supported for IPSec: • Shared Key Authentication-Any ASCII phrase shared among even in Secure mode. • Unsecured Only-Allows the port to only open when the printer is not in Secure mode. Note: A password must be set to enable Secure
  • Lexmark C772 | User's Guide - Page 83
    If an optional internal wireless print server is installed, click Wireless instead of 802.1x Authentication. Locking the operator panel menus Operator Panel Menu Lockout lets you create a PIN number and choose specific menus to lock. Each time a locked menu is selected, the user will be prompted to
  • Lexmark C772 | User's Guide - Page 84
    , click Security. 4 Click Printer Lockout PIN. Confidential Print Setup Confidential Print Setup lets you designate a maximum number of PIN entry attempts and set an expiration time for print jobs. When a user exceeds a specific number of PIN entry attempts, all of that user's print jobs are deleted
  • Lexmark C772 | User's Guide - Page 85
    all toner colors that are used, the minimum percentage that prints is 2 percent. Reported values may vary from printer to printer. The accuracy of the estimates may be affected by how full the print cartridges are, environmental conditions, the media type, the software application, software settings
  • Lexmark C772 | User's Guide - Page 86
    .* The printer stops printing, displays a message, and activates the selected alarm type. Toner Alarm Lets you choose how the printer Off responds when toner is low. The printer displays a message and continues printing. Single Continuous The printer stops printing, displays a message, and
  • Lexmark C772 | User's Guide - Page 87
    Online customer support Customer support is available on the Lexmark Web site at www.lexmark.com. Calling for service When you call for printer service, describe the problem you are experiencing, the message on the display, and the troubleshooting steps you have already taken to find
  • Lexmark C772 | User's Guide - Page 88
    . If the messages do not appear, turn the printer off and call for service. The USB device you are using may not be supported or has an error. Only specific USB flash memory devices are supported. For information regarding tested and approved USB flash memory devices, see the Lexmark Web site at
  • Lexmark C772 | User's Guide - Page 89
    in the driver overrides the setting in the Finishing Menu. For more informations, see the Menus and Messages Guide. Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job. Add printer memory or an
  • Lexmark C772 | User's Guide - Page 90
    or exits the duplex unit, the printer and duplex unit may not be properly aligned. Make sure flash memory is securely connected to the printer system board. Make sure the hard disk is securely connected to the printer system board. • Make sure the internal print server (also called an internal
  • Lexmark C772 | User's Guide - Page 91
    . Service messages A service message indicates printer failure that may require service. Turn the printer off, wait about 10 seconds, and then turn the printer on. If the error recurs, write down the error number, the problem, and a detailed description. Call 1-800-LEXMARK for service. Solving
  • Lexmark C772 | User's Guide - Page 92
    Troubleshooting Solving paper feed problems Symptom Cause Solution Paper frequently jams. You are using paper that does not meet the printer specifications. Use recommended paper and other specialty media. See the Card Stock & Label Guide available on the Lexmark Web site at www.lexmark.com
  • Lexmark C772 | User's Guide - Page 93
    defects Either the print cartridges are defective, the image transfer unit and transfer roller are defective, or the fuser is defective. Top to Bottom or Left to Right: 1 Re-seat the cartridges by removing them from the printer and then reinserting them. 2 Invoke a Color Adjust operation from
  • Lexmark C772 | User's Guide - Page 94
    Replace the print cartridge, the transfer roller, the image transfer unit, or fuser as needed. From the printers operator panel, print the repetitive defects guide to determine which component needs to be replaced. ABCDE ABCDE Streaked vertical lines ABCDE ABCDE ABCDE • Toner is smeared before
  • Lexmark C772 | User's Guide - Page 95
    The transfer roller is worn or defective. • The image transfer unit is worn or defective. • The fuser is worn or defective. • Toner is in the paper path. • Replace the print cartridges. • Replace the transfer roller. • Replace the image transfer unit. • Replace the fuser. • Call for service. Toner
  • Lexmark C772 | User's Guide - Page 96
    Replace the print cartridges. • Replace the transfer roller. • Replace the image transfer unit. Ghost Images Toner level is low in the print cartridges. Replace the print cartridges. Clipped images (Some of the print is cut off on the sides, top, or bottom of the paper.) Guides in the selected
  • Lexmark C772 | User's Guide - Page 97
    yellow, and black inks or toners can be printed in various amounts to produce a large range of colors observed in nature. For example, cyan and yellow can be combined to create green. Printing presses, inkjet printers, and color laser printers create colors in this manner. CMYK color is a method of
  • Lexmark C772 | User's Guide - Page 98
    " in the User's Guide on the Software and Documentation CD. Color Saver must be Off to adjust Toner Darkness. What is Manual Color Correction? The color conversion tables applied to each object on the printed page when using the default Auto Color Correction setting generate preferred color for the
  • Lexmark C772 | User's Guide - Page 99
    color-matching problem depends on the Color Correction setting being used (Auto, Off, or Manual), the type of object being printed (text, graphics, or images), and how the color of the object is specified in the software application (RGB or CMYK combinations). When the printer Color Correction
  • Lexmark C772 | User's Guide - Page 100
    Troubleshooting increment value that defines the difference between the RGB value that each color box differs by. If the user selects Print, a printout generates which consists of the user-specified color and the colors that exist near this color based on the increment value. This process can be
  • Lexmark C772 | User's Guide - Page 101
    that could cause you harm. Warning: A warning identifies something that could damage your product hardware or software. Electronic emission notices With a network cable installed Federal Communications Commission (FCC) compliance information statement The Lexmark C770, C772, types 5061-100, 5061-110
  • Lexmark C772 | User's Guide - Page 102
    Warning: When a network cable is attached, this is a Class A product. In a domestic environment, this product may cause radio interference, in which case, the user (FCC) compliance information statement The Lexmark C770, C772, types 5061-100, 5061-110, accordance with the instructions, may cause
  • Lexmark C772 | User's Guide - Page 103
    Lexmark part number 12A2405 (USB). Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations. Any questions regarding this compliance information statement should be directed to: Director of Lexmark Technology & Services Lexmark Support, Lexmark
  • Lexmark C772 | User's Guide - Page 104
    Notices Noise emission levels Hinweis zum GS-Zeichen Modell: Lexmark C770, C772 Gerätetyp: 5061-100, 5061-110, 5061-300, 5061-310 Postanschrift Lexmark Deutschland GmbH Postfach 1560 63115 Dietzenbach Adresse Lexmark Deutschland GmbH Max-Planck-Straße 12 63128 Dietzenbach Telefon: 0180 - 564 56
  • Lexmark C772 | User's Guide - Page 105
    print 190 W job. The product is in energy-saving 25 W mode. The product is plugged into a wall 150 mW outlet, but the switch is turned off. Power Saver As part product energy usage. Since power consumption claims are provided in power units of Watts, the power consumption should be multiplied by
  • Lexmark C772 | User's Guide - Page 106
    a 5 milliwatt gallium arsenide laser operating in the wavelength region of 770-795 nanometers. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service condition. Notices 106
  • Lexmark C772 | User's Guide - Page 107
    consumed. Fuser Units, Image Transfer Units, Waste Toner Bottles, and Paper Feed items, and any other items for which a Maintenance Kit is available are substantially consumed when the printer displays a "Life Warning" or "Scheduled Maintenance" message for such item. To obtain warranty service you
  • Lexmark C772 | User's Guide - Page 108
    actual damages up to the limit set forth in the following paragraph. Lexmark's liability for actual damages from any cause whatsoever will be limited to damages, so the limitations or exclusions contained above may not apply to you. This limited warranty gives you specific legal rights. You may also
  • Lexmark C772 | User's Guide - Page 109
    menus 79 envelope sizes 7 3/4 (Monarch) 53 F firmware card installing 14 flash memory 19 removing 19 G guidelines media 46 printing letterhead 49 H hard disk 21 Held jobs 39 held jobs entering user name 40 overview 40 types of 40 I image transfer unit ordering 61 installing Coax/Twinax Adapter 16
  • Lexmark C772 | User's Guide - Page 110
    45 clearing 62 fuser 69 Parallel Interface Card 16 PIN entering at the printer 41 entering from the driver 40 Power Saver, adjusting 80 preprinted forms 49 Print and Hold function see held jobs 39 print server installing printer memory option, removing 19 printer system board 18 accessing 18
  • Lexmark C772 | User's Guide - Page 111
    stack height, maximum multipurpose feeder 36 trays 1, 2, 3 32, 34 Stop button 25 storing 44 media 52 paper 44 supplies 44 supplies print cartridge 59 storing 44 system board accessing 13 T transfer roller ordering 61 tray linking 38 U unpacking memory cards 13 option cards 16 USB Direct interface 27
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
C770, C772
User’s Guide
October 2007
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries.
© 2006 Lexmark International, Inc.
740 West New Circle Road
Lexington, Kentucky 40550