Lexmark C925 Card Stock & Label Guide

Lexmark C925 Manual

Get Lexmark C925 PDF manuals and user guides View all Lexmark C925 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark C925 manual content summary:

  • Lexmark C925 | Card Stock & Label Guide - Page 1
    Card Stock & Label Guide Laser Printers January 2011 www.lexmark.com
  • Lexmark C925 | Card Stock & Label Guide - Page 2
    in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access
  • Lexmark C925 | Card Stock & Label Guide - Page 3
    11 Maintenance procedures...13 Troubleshooting...13 Card stock 15 Weight...15 Grain orientation...16 Coatings...17 Offset powders...18 Labels...19 Label characteristics...19 Printing on labels...19 Duplexing paper labels...19 Label components...21 Label design guidelines...23 Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 4
    C750...42 Lexmark C752...44 Lexmark C760 and C762...46 Lexmark C770, C772, C780, and C782...49 Lexmark C790...50 Lexmark C910...52 Lexmark C912...53 Lexmark C920...55 Lexmark C925...56 Lexmark C935...58 Lexmark E120...59 Lexmark E220...61 Lexmark E230, E232, E234(n), E330, and E332n 62 Lexmark E238
  • Lexmark C925 | Card Stock & Label Guide - Page 5
    , and X738...113 Lexmark X782...115 Lexmark X790...117 Lexmark X850, X852e, and X854e...119 Lexmark X860e, X862e, and X864e...121 Lexmark X925...124 Lexmark X940 and X945...126 Optra plus, 4039, 4029, 4019, WinWriter 600 printers 127 Optra C...130 Optra C710...131 Optra Color 1200...133 Optra E, Ep
  • Lexmark C925 | Card Stock & Label Guide - Page 6
    6
  • Lexmark C925 | Card Stock & Label Guide - Page 7
    contact numbers, see the printer registration card, information on the printer CD, or visit the Lexmark Web site at http://support.lexmark.com. Note: Always test print materials thoroughly before buying large quantities. Doing so will help you avoid unexpected problems when you begin regular
  • Lexmark C925 | Card Stock & Label Guide - Page 8
    time can create printing problems. Exclusive printing of labels, for example, may result in more frequent service calls. Proper printer maintenance helps alleviate these problems. For information about maintaining your printer, see "Maintenance procedures" on page 13. Print material testing Choosing
  • Lexmark C925 | Card Stock & Label Guide - Page 9
    locate your printer in the "Printer specifications" chapter. Your printer can accept a wide range of stock weights, but materials either too light or too heavy can cause printing problems. Heavy and/or thicker materials may not heat quickly enough in the fuser, resulting in poor print quality. They
  • Lexmark C925 | Card Stock & Label Guide - Page 10
    image appears raised above the surface of the print material. These inks can melt and damage the fuser assembly. Preprinted inks must also be abrasion resistant to reduce ink dust and ink contamination in the printer. If you are printing over a preprinted area, the ink must be receptive to toner
  • Lexmark C925 | Card Stock & Label Guide - Page 11
    to have installed a maintenance kit as specified (if applicable) • use of printing media outside of Lexmark specifications • use of non-Lexmark supplies (such as toner cartridges and/or inkjet cartridges) • use of non-Lexmark product or component Pick roller technology Some printers have an auto
  • Lexmark C925 | Card Stock & Label Guide - Page 12
    For the following printers, make sure perforations fall outside the 0.3-0.79-inch area on the leading edge of the media: Optra S, Optra T, T520, T522, T620, T622, T630, T632, T634,
  • Lexmark C925 | Card Stock & Label Guide - Page 13
    cleaning process every time you replace the black cartridge, more often with some media. Failure to follow maintenance procedures for your printer could cause jamming, poor print quality, feeding problems, and fuser problems. Troubleshooting The following table provides solutions for some common
  • Lexmark C925 | Card Stock & Label Guide - Page 14
    Solutions to printing problems Problem Solution Print on heavy stock is blurred or out of focus. Toner rubs off the page. Make sure the Paper Type setting is appropriate for your print material. (Card stock in excess of 203 g/m2 [54-lb bond] may not produce acceptable print results.) Print five
  • Lexmark C925 | Card Stock & Label Guide - Page 15
    there may not be enough voltage to pull the toner onto the paper properly, resulting in poor print quality. To determine if your printer is able to print on cover stock, locate your printer in the "Printer specifications" chapter and review the supported paper type information. You can also view the
  • Lexmark C925 | Card Stock & Label Guide - Page 16
    problems, and material thicker than 0.17 mm (0.007 in.) may reduce print quality. Contact your supplier to determine the weight of any card stock you currently use. See the individual printer specifications in this document for more information about the card stock weights your printer supports
  • Lexmark C925 | Card Stock & Label Guide - Page 17
    the individual printer specifications in "Printer specifications" on page 30 for more information about the recommended grain direction for card stock you use with your printer. Coatings Surface texture and coatings on card stock significantly affect toner adhesion (fuse grade), print quality, and
  • Lexmark C925 | Card Stock & Label Guide - Page 18
    are used by print shops to prevent printed pages from sticking together. Powder is usually sprayed on the printed page right before it reaches the stacker on the offset printing press. This powder provides an intermediate layer between two sheets of paper, preventing ink from transferring from one
  • Lexmark C925 | Card Stock & Label Guide - Page 19
    service warranties. Do not feed labels through the printer more than once. Doing so may result in adhesive contamination to the cartridge and other components. Depending on your printer model and the number of labels you print, printing labels may require special printer maintenance. For specific
  • Lexmark C925 | Card Stock & Label Guide - Page 20
    label sheet and prevent tearing at perforations and die-cuts during printing. In addition, using ties helps prevent the labels from predispensing in the printer. The slits and cuts in the labels expose the adhesives to the printer. For best results when duplexing labels, position the label sheet so
  • Lexmark C925 | Card Stock & Label Guide - Page 21
    makes it possible to print on both sides of paper labels specifically designed for duplexing. In addition, you can use the wiper to simplex paper labels and duplex paper in the same printer. When ordering a new cartridge, be sure to order the cartridge that includes the correct fuser wiper. Label
  • Lexmark C925 | Card Stock & Label Guide - Page 22
    -sensitive constructions using Kraft liners. Tissue-backed or plain bond liners reduce toner contamination inside the printer and improve feed performance. Slick, non-porous liners are harder to feed and increase toner buildup in the fuser and on the backup roll. Rough backings, on the other hand
  • Lexmark C925 | Card Stock & Label Guide - Page 23
    printing problem is printer and cartridge contamination. The adhesives are semi-liquid and may contain volatile components. If the sheet jams in the fuser, the adhesive can melt, thereby contaminating parts of the printer or releasing fumes. To avoid exposing adhesive to the paper path guides, drive
  • Lexmark C925 | Card Stock & Label Guide - Page 24
    driver edge Using cut sheet labels with adhesive applied to the edge of the sheet will contaminate your printer and your cartridge and could void your printer and cartridge the final product, then print before removing the matrix. If the matrix must be removed before printing, then round all corners
  • Lexmark C925 | Card Stock & Label Guide - Page 25
    Leading Edge 8.5 in. 215.9 mm Waste strip 0.25 in (6.35 mm) Non-print area 0.33 in. 8.38 mm 0.5 in. Top perforation 12.7 mm Waste strip Driver edge 11 in. 279.4 mm 0.06 in. 1.6 mm Perforation end Liner edge 0.33 in. 8.38 mm Non-print area 0.25 in. 6.35 mm Non-print area 0.25 in. 6.35 mm
  • Lexmark C925 | Card Stock & Label Guide - Page 26
    The following diagram shows a recommended label design for the T640 and T650 laser printers. Labels 26
  • Lexmark C925 | Card Stock & Label Guide - Page 27
    0.25 in. 6.35 mm Non-print area (Not drawn to scale) Cut sheet paper labels • Generally, cut sheet paper labels work well with your printer. • Coating or sizing to make the paper liquid-resistant decreases toner adhesion and increases the risk of toner contaminating the fuser. At a minimum, paper
  • Lexmark C925 | Card Stock & Label Guide - Page 28
    • To help prevent material from slipping in the fuser, we recommend knurling, which roughens up the exposed printer, which will require printer servicing. For more information on recommended label designs, see "Label design guidelines" on page 23. • For Optra S, Optra T, and Lexmark T printers
  • Lexmark C925 | Card Stock & Label Guide - Page 29
    are non-absorbing, which leads to toner build-up in the fuser that requires special maintenance. See the documentation that came with your printer for specific information about maintaining your printer. Vinyls may require a topcoat to ensure good toner adhesion. • Polyester labels are less heat
  • Lexmark C925 | Card Stock & Label Guide - Page 30
    Using media higher than 300 Sheffield could result in printing degradation. Weight: 163-g/m2 (90-lb) Index Bristol 163-g/m2(100-lb) Tag Up to 210-g/m2 (78-lb) Cover For more information on the supported media sizes, see the printer User's Guide on the publications CD. Printer specifications 30
  • Lexmark C925 | Card Stock & Label Guide - Page 31
    C510 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C510 does not support vinyl or polyester labels. The Lexmark C510 supports stocks up to 176 g/m2. Feed labels from the standard tray only, which holds up to 80 sheets of labels or up to
  • Lexmark C925 | Card Stock & Label Guide - Page 32
    support vinyl or polyester labels. The Lexmark C520, C522, and C524 support stocks up to 176 g/m2. Card stock is supported from Tray 1, Tray 2, the manual feed slot, and the multipurpose feeder. Labels are supported only from the multipurpose feeder and the manual feed slot. Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 33
    than 200 Sheffield could result in print quality degradation. Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD. Printer specifications 33
  • Lexmark C925 | Card Stock & Label Guide - Page 34
    to Card Stock. For more information, see "Pick roller technology" on page 11. Lexmark C530, C532, and C534 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C530, C532, and C534 do not support vinyl or polyester labels. Printer specifications 34
  • Lexmark C925 | Card Stock & Label Guide - Page 35
    than 200 Sheffield could result in print quality degradation. Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD. Printer specifications 35
  • Lexmark C925 | Card Stock & Label Guide - Page 36
    11. Lexmark C540, C543, C544, and C546dtn Notes: • Your printer may not have a 650-sheet duo drawer with an integrated multipurpose feeder. • The 250-sheet tray (Tray 1) and the 650-sheet duo drawer support the same paper sizes and types. • Not all models are pictured. Printer specifications 36
  • Lexmark C925 | Card Stock & Label Guide - Page 37
    Sheffield, such as coated paper, polyester, vinyl or other synthetic facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. For more information on the supported media sizes, see the printer User's Guide on the publications CD. Printer specifications 37
  • Lexmark C925 | Card Stock & Label Guide - Page 38
    does not support vinyl or polyester labels. The Lexmark C720 supports stocks up to 43 lb (163 g/m2). Feed labels from the standard tray only, which holds up to 80 sheets of labels or up to 120 sheets of card stock. The following table lists the maximum weights supported. Printer specifications 38
  • Lexmark C925 | Card Stock & Label Guide - Page 39
    support Paper source Tray 1 (standard tray) Index Bristol 163 g/m2 Card stock Tag 163 g/m2 Cover - For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 163 g/m2 - Media specifications 300 Sheffield could result in printing degradation. Weight: Up to
  • Lexmark C925 | Card Stock & Label Guide - Page 40
    of label support Paper source Standard 550-sheet tray (Tray 1) Optional 550-sheet tray Optional 550-sheet specialty media drawer Multipurpose tray Dual Web/Paper 180 g/m2 180 g/m2 Labels Polyester 220 g/m2 220 g/m2 Vinyl 300 g/m2 300 g/m2 180 g/m2 220 g/m2 300 g/m2 Printer specifications 40
  • Lexmark C925 | Card Stock & Label Guide - Page 41
    lb) Weight: Up to 216 g/m2 (80 lb) For more information on the supported media sizes, see the printer User's Guide on the publications CD. Card stock and label guidelines When printing on labels: • Print samples on the labels being considered for use before buying large quantities. • Use only
  • Lexmark C925 | Card Stock & Label Guide - Page 42
    humidity is less than 60% and is not supported in duplex. 2 See "Grain orientation" on page 16 for specific recommendations. 3 Vinyl labels are supported only when printing environment and media are 20-32°C (68-90°F). 4 Pressure-sensitive area must enter the printer first. Printer specifications 42
  • Lexmark C925 | Card Stock & Label Guide - Page 43
    orientation" on page 16 for specific recommendations. 3 Vinyl labels are supported only when printing environment and media are 20-32°C (68-90°F). 4 Pressure-sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark C750 Publications CD. The following
  • Lexmark C925 | Card Stock & Label Guide - Page 44
    " on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C752 The Lexmark C752 prints on many labels designed for use with laser printers. The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m2 paper, reliably feed all supported media. The following
  • Lexmark C925 | Card Stock & Label Guide - Page 45
    m2 140-175 g/m2 Paper base (grain long) 75-135 g/m2 (20-36 lb specific recommendations. 3 Vinyl labels are supported only when printing environment and media are 20-32°C (68-90°F). 4 Pressure-sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark
  • Lexmark C925 | Card Stock & Label Guide - Page 46
    that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C760 and C762 Printer specifications 46
  • Lexmark C925 | Card Stock & Label Guide - Page 47
    Lexmark C760 and C762 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2,000-sheet drawer supports paper only. Print material specifications Paper base (grain long) 75-135
  • Lexmark C925 | Card Stock & Label Guide - Page 48
    creased card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 48
  • Lexmark C925 | Card Stock & Label Guide - Page 49
    supported only when the printing environment and media are 20-32.2°C (68-90°F). 2 The skew performance of heavy vinyl labels may be enhanced by feeding from an optional 500-sheet drawer if placement of the image is critical. For paper and transparency specifications, see the printer publications
  • Lexmark C925 | Card Stock & Label Guide - Page 50
    " on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C790 Lexmark C790 prints on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Printer specifications 50
  • Lexmark C925 | Card Stock & Label Guide - Page 51
    print materials for laser printers. A fuser equipped with a dry web cleaner may be required for label applications to optimize feed reliability. If you print large quantities of labels or other glossy print media, then install a dry web cleaner upgrade kit (P/N 40X1856). Contact your local service
  • Lexmark C925 | Card Stock & Label Guide - Page 52
    technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C910 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C910 supports stocks up to 163 g/m2
  • Lexmark C925 | Card Stock & Label Guide - Page 53
    stock and label guidelines When printing on labels: • Use printers. We do not recommend using vinyl or polyester labels. The Lexmark C912 supports stocks up to 216 g/m2. The following table lists the maximum weights supported by the standard tray and the multipurpose feeder. Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 54
    is optimal. Using media higher than 300 Sheffield could result in printing degradation. Weight: Up to 216 g/m2 For paper and transparency specifications, refer to the printer publications CD. Card stock and label guidelines When printing on labels: • Use only label sheets that have no gaps
  • Lexmark C925 | Card Stock & Label Guide - Page 55
    set the Paper Type to Card Stock in the Paper Menu. Lexmark C920 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C920 supports stocks up to 216 g/m2. The following table lists the maximum
  • Lexmark C925 | Card Stock & Label Guide - Page 56
    in the Paper Menu. Lexmark C925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The trays and the multipurpose feeder support card stock. The multipurpose feeder supports card stocks up
  • Lexmark C925 | Card Stock & Label Guide - Page 57
    printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.04 in.) of the die-cut, the edge of the label or the perforations, or between the die-cuts. Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 58
    • We recommend the use of grain long card stock. Lexmark C935 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to 220 g/m2. The following table lists
  • Lexmark C925 | Card Stock & Label Guide - Page 59
    to peel off during printing, resulting in a paper Lexmark E120 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder. Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 60
    could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the top exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 60
  • Lexmark C925 | Card Stock & Label Guide - Page 61
    could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the top exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 61
  • Lexmark C925 | Card Stock & Label Guide - Page 62
    could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 62
  • Lexmark C925 | Card Stock & Label Guide - Page 63
    could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 63
  • Lexmark C925 | Card Stock & Label Guide - Page 64
    could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 64
  • Lexmark C925 | Card Stock & Label Guide - Page 65
    could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 65
  • Lexmark C925 | Card Stock & Label Guide - Page 66
    could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the top exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 66
  • Lexmark C925 | Card Stock & Label Guide - Page 67
    could result in printing degradation. Card stock Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the top exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 67
  • Lexmark C925 | Card Stock & Label Guide - Page 68
    in the standard tray or over 30 label sheets in the multipurpose feeder. Warning-Potential Damage: Feeding labels from print media sources that are not supported may damage your printer. For paper and transparency specifications, see the Lexmark T420 Publications CD. Printer specifications 68
  • Lexmark C925 | Card Stock & Label Guide - Page 69
    introduces semi-liquid and volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain short card stock. • Load card stock with the recommended print side faceup and the top edge going in first. Printer specifications 69
  • Lexmark C925 | Card Stock & Label Guide - Page 70
    For more information, see "Maintenance procedures" on page 13. Lexmark T430 The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We do not recommend using vinyl or polyester labels. The Lexmark T430 supports stocks from 60-163 g/m2 (16-
  • Lexmark C925 | Card Stock & Label Guide - Page 71
    printing, resulting in a paper jam. Partial sheets will also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge print side facedown. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver, the Local Printer Setup
  • Lexmark C925 | Card Stock & Label Guide - Page 72
    information, see "Maintenance procedures" on page 13. Lexmark T520, T522 The Lexmark T520 and T522 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or
  • Lexmark C925 | Card Stock & Label Guide - Page 73
    indicates the paper sizes each tray supports. Paper Source specifications for all media Standard sizes (width x length) Universal sizes (width x "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers.
  • Lexmark C925 | Card Stock & Label Guide - Page 74
    that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T620, T622 Printer specifications 74
  • Lexmark C925 | Card Stock & Label Guide - Page 75
    The Lexmark T620 and T622 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print Material Multipurpose feeder4 and optional
  • Lexmark C925 | Card Stock & Label Guide - Page 76
    label guidelines Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be used for label applications to optimize feed reliability. See your printer documentation for information on ordering additional label fuser cleaners. Printer specifications 76
  • Lexmark C925 | Card Stock & Label Guide - Page 77
    procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T630, T632, T634 The Lexmark T630, T632, and T634 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Printer specifications 77
  • Lexmark C925 | Card Stock & Label Guide - Page 78
    Print material specifications Range or maximum weight supported Print -sensitive area3 140-175 g/m2 140-175 g/m2 Paper base (grain long) 75-135 g/m2 (20-36 lb bond) 75-135 sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal sizes
  • Lexmark C925 | Card Stock & Label Guide - Page 79
    a special label fuser cleaner that prevents duplexing. It is recommended that when you run vinyl labels, you install a special oil fuser cleaner, P/N 56P1415. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. Printer specifications 79
  • Lexmark C925 | Card Stock & Label Guide - Page 80
    that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 80
  • Lexmark C925 | Card Stock & Label Guide - Page 81
    Lexmark T640, T642, and T644 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support multipurpose feeder. Media specifications Labels Card stock Thickness
  • Lexmark C925 | Card Stock & Label Guide - Page 82
    wax wiper that is used with the T640, T642, and T644 is P/N 40X2666. (Cartridges designed for duplex label printing contain two wax wipers. Change the wax wiper at the halfway point of your normal cartridge usage to provide additional cleaning and optimize performance.) Printer specifications 82
  • Lexmark C925 | Card Stock & Label Guide - Page 83
    " on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T650, T652, T654, and T656dne The Lexmark T650, T652, T654, and T656dne print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the
  • Lexmark C925 | Card Stock & Label Guide - Page 84
    . Media specifications Labels Card print sizes, such as 3 x 5-inch index cards, Lexmark print forms with a minimum length of five inches when installed either in the integral tray location or in a 200-sheet drawer under a 200-sheet integral tray. Forms less than seven inches long are not supported
  • Lexmark C925 | Card Stock & Label Guide - Page 85
    paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When feeding
  • Lexmark C925 | Card Stock & Label Guide - Page 86
    • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark W812 The Lexmark W812 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support
  • Lexmark C925 | Card Stock & Label Guide - Page 87
    .) 279-356 mm (11-11.7 in.) Up to 163 g/m2 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W820 supports stocks up to 163 g/m2. Always feed labels and card stock from Tray
  • Lexmark C925 | Card Stock & Label Guide - Page 88
    . • We recommend the use of grain long card stock. Lexmark W840 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W840 supports stocks up to 216 g/m2. Always feed labels and
  • Lexmark C925 | Card Stock & Label Guide - Page 89
    the machine more than once. • Load labels into the manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver. • Do not use preprinted card stock manufactured with chemicals
  • Lexmark C925 | Card Stock & Label Guide - Page 90
    the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark W850 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W850 supports
  • Lexmark C925 | Card Stock & Label Guide - Page 91
    volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Printer specifications 91
  • Lexmark C925 | Card Stock & Label Guide - Page 92
    could result in printing degradation. Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) When printing on labels: • Use labels only in the paper tray or manual feeder. Do not use labels in the ADF. • Do not use labels with slick backing material. Printer specifications 92
  • Lexmark C925 | Card Stock & Label Guide - Page 93
    on card stock and labels. For more information, see "Maintenance procedures" on page 13. Lexmark X215 The Lexmark X215 prints on paper office labels designed for use with laser printers. Labels can be fed only from the manual bypass feeder. Card stock and labels must be fed one sheet at a time
  • Lexmark C925 | Card Stock & Label Guide - Page 94
    support Card stock Paper source Index Bristol Manual bypass feeder* Up to 163 g/m2 (90 lb) * Card stock can be fed only from the manual bypass feeder. Tag Up to 163 g/m2 (100 lb) For paper and transparency specifications, see the Lexmark X215 User's Guide. Cover - Media specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 95
    can load up to 50 label sheets in the standard tray. Card stock must be sent through the manual feeder one sheet at a time. The following table lists the maximum weights supported by the standard tray, optional 250- and 550-sheet trays, and multipurpose and manual feeders. Printer specifications 95
  • Lexmark C925 | Card Stock & Label Guide - Page 96
    a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non-oozing adhesive. • Portrait orientation works best, especially when printing bar codes. When printing on card stock: • Make sure the Paper Type is Card Stock. • Select the Paper Texture setting. Printer specifications 96
  • Lexmark C925 | Card Stock & Label Guide - Page 97
    stock when possible. For more information, see "Maintenance procedures" on page 13. Lexmark X422 The Lexmark X422 prints on many labels designed for use with laser printers. Card stock is supported from the multipurpose feeder, and labels are supported from the standard tray. The following table
  • Lexmark C925 | Card Stock & Label Guide - Page 98
    . Lexmark X463de, X464de, X466dte, and X466dtwe Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl, pharmacy, or polyester labels. It is recommended to print no more than 20 pages of paper labels a month. Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 99
    Manual feeder Multipurpose feeder 163 g/m2 Card stock should be grain short and set to exit the rear door. - 163 g/m2 For paper and transparency specifications, see the printer curl, use the rear exit when printing on card stock and labels. When printing on labels: • Check with the manufacturer
  • Lexmark C925 | Card Stock & Label Guide - Page 100
    . For more information, see "Maintenance procedures" on page 13. Lexmark X500 and X502n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark X500 and X502n do not support vinyl or polyester labels. The Lexmark X500 and X502n support 90-210 g/m2 (24
  • Lexmark C925 | Card Stock & Label Guide - Page 101
    g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD. Lexmark X543, X544, and X546dtn Limit label printing to occasional use of paper office labels feeding may be experienced from the multipurpose feeder. Printer specifications 101
  • Lexmark C925 | Card Stock & Label Guide - Page 102
    can cause feeding problems. • Use only letter-, A4-, or legal-size full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When printing on card
  • Lexmark C925 | Card Stock & Label Guide - Page 103
    Lexmark X560 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Media specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 104
    Do not use card stock that is creased. It may cause paper jams. Lexmark X642e The Lexmark X642e prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is
  • Lexmark C925 | Card Stock & Label Guide - Page 105
    feeder. Media specifications Labels Card stock print sizes, such as 3 x 5-inch index cards, Lexmark print forms with a minimum length of 5 inches when installed either in the integral tray location or in a 250-sheet drawer under a 250-sheet integral tray. Forms less than 7 inches are not supported
  • Lexmark C925 | Card Stock & Label Guide - Page 106
    high yield print cartridge. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must install a special fuser wiper
  • Lexmark C925 | Card Stock & Label Guide - Page 107
    Lexmark X644e and X646e print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 108
    high yield print cartridge. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must install a special fuser wiper
  • Lexmark C925 | Card Stock & Label Guide - Page 109
    16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark X651de, X652de, X654de, X656de, and X658de The Lexmark X651de, X652de, X654de, X656de, and X658de print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the
  • Lexmark C925 | Card Stock & Label Guide - Page 110
    be used to print forms with a minimum length of five inches when installed either in the integral tray location or in a 250-sheet drawer under a 250-sheet integral tray. Forms less than seven inches in length are not supported from a 400-sheet universally adjustable tray. Printer specifications 110
  • Lexmark C925 | Card Stock & Label Guide - Page 111
    consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label. You must install a special fuser wiper. The wax wiper that is used with the X651de, X652de, X654de, and X656de printers is P/N 40X2666 (cartridges designed for duplex label printing contain
  • Lexmark C925 | Card Stock & Label Guide - Page 112
    that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 112
  • Lexmark C925 | Card Stock & Label Guide - Page 113
    of label support Paper source Standard 550-sheet tray (Tray 1) Optional 550-sheet tray Optional 550-sheet specialty media drawer Multipurpose tray Dual Web/Paper 180 g/m2 180 g/m2 Labels Polyester 220 g/m2 220 g/m2 Vinyl 300 g/m2 300 g/m2 180 g/m2 220 g/m2 300 g/m2 Printer specifications 113
  • Lexmark C925 | Card Stock & Label Guide - Page 114
    lb) Weight: Up to 216 g/m2 (80 lb) For more information on the supported media sizes, see the printer User's Guide on the publications CD. Card stock and label guidelines When printing on labels: • Print samples on the labels being considered for use before buying large quantities. • Use only
  • Lexmark C925 | Card Stock & Label Guide - Page 115
    supported only when the printing environment and media are 20-32.2°C (68-90°F). 2 The skew performance of heavy vinyl labels may be enhanced by feeding from an optional 500-sheet drawer if placement of the image is critical. For paper and transparency specifications, see the printer User's Guide
  • Lexmark C925 | Card Stock & Label Guide - Page 116
    print materials for laser printers. A fuser equipped with a dry web cleaner may be required for label applications to optimize feed reliability. If you print large quantities of labels or other glossy print media, then install a dry web cleaner upgrade kit (P/N 40X1856). Contact your local service
  • Lexmark C925 | Card Stock & Label Guide - Page 117
    Lexmark X790 Lexmark X790 supports card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, and the multipurpose feeder. Note: The optional 2,000-sheet drawer does not support card stock or labels. Overview of card stock support g/m2 216 g/m2 Printer specifications 117
  • Lexmark C925 | Card Stock & Label Guide - Page 118
    the image is critical. Media specifications Labels Card stock Width: 76.2-139.7 mm (3-8.5 in.) Length: 127-355.6 mm (5-14 in.) Weight: 160-220 g/m2 160-300 g/m2 (Vinyl) Thickness: Up to 0.25 mm Smoothness: 50-300 Sheffield* * 50-150 Sheffield is optimal. This printer may support labels
  • Lexmark C925 | Card Stock & Label Guide - Page 119
    printing to occasional use of paper office labels designed for laser printers. Paper labels are supported in Tray 1, Tray 2, and the manual bypass feeder. The following table lists the maximum weights supported. Note: Scanning large quantities of labels is not recommended. Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 120
    printed. Card stock and label guidelines When printing on labels: • Set the Paper Type to Labels from the printer driver. • Use standard-size printer. • Portrait orientation is preferred, especially when printing bar codes. • Do not use labels that have exposed adhesive. Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 121
    the top edge going in first. Lexmark X860e, X862e, and X864e Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark X860e, X862e, and X864e support stocks up to 216 g/m2. Always
  • Lexmark C925 | Card Stock & Label Guide - Page 122
    the machine more than once. • Load labels into the manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver. • Do not use preprinted card stock manufactured with chemicals
  • Lexmark C925 | Card Stock & Label Guide - Page 123
    • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Printer specifications 123
  • Lexmark C925 | Card Stock & Label Guide - Page 124
    Lexmark X925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Trays and the multipurpose feeder support card stock. The multipurpose feeder supports 256 g/m2 Printer specifications 124
  • Lexmark C925 | Card Stock & Label Guide - Page 125
    at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • Use grain long card stock, and set Paper Type to Card Stock. • Do not use creased card stock. It may cause paper jams. Printer specifications 125
  • Lexmark C925 | Card Stock & Label Guide - Page 126
    occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X940 and X945 support stocks up to 220 g/m2. Always feed labels and card stock from Tray 1, 2, or 3. We recommend printing on grain long card stock. The
  • Lexmark C925 | Card Stock & Label Guide - Page 127
    grams) Manual feed tray Index Bristol 163 g/m2 90 g/m2 135 g/m2 163 g/m2 199 g/m2 253 g/m2 Card stock Tag 163 g/m2 - 135 g/m2 163 g/m2 203 g/m2 241 g/m2 Cover 176 g/m2 - 135 g/m2 176 g/m2 216 g/m2 285 g/m2 For paper and transparency specifications, see your printer User's Guide. Labels Paper
  • Lexmark C925 | Card Stock & Label Guide - Page 128
    -180 g/m2 Upper: 260-265 g/m2 Lower: 260-300 g/m2 1 You can manually feed card stock with a weight up to 285 g/m2. 2 For pressure-sensitive materials under 131 g/m2, grain long is recommended. For pressure-sensitive materials over 131 g/m2, grain short is recommended. Printer specifications 128
  • Lexmark C925 | Card Stock & Label Guide - Page 129
    maintenance procedures outlined in the following sections. General maintenance If the print quality begins to degrade when printing sheets of vinyl labels, we suggest you follow the three cleaning steps below: 1 Print 5 sheets of paper. 2 Wait approximately 5 seconds. Printer specifications
  • Lexmark C925 | Card Stock & Label Guide - Page 130
    for specific instructions on how to properly clean your printer. Removing debris helps improve paper feeding and fuse grade. • See your printer documentation for other maintenance procedures to maintain the print quality and reliability of your printer. For more information, see "Troubleshooting" on
  • Lexmark C925 | Card Stock & Label Guide - Page 131
    the paper trays. For paper and transparency specifications, see the printer User's Guide. Optra C710 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra C710 supports stocks up to 163 g/m2 (90 lb
  • Lexmark C925 | Card Stock & Label Guide - Page 132
    to make the labels liquid-resistant. • Do not use labels that have exposed adhesive on the label sheets. When printing on card stock: • We recommend using Springhill Index Plus 90 lb card stock. • For the best print quality, always set the Paper Type to Card Stock. Printer specifications 132
  • Lexmark C925 | Card Stock & Label Guide - Page 133
    table lists the maximum weights supported by the multipurpose feeder. Overview of card stock and label support Paper source Multipurpose feeder Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 135 g/m2
  • Lexmark C925 | Card Stock & Label Guide - Page 134
    by Tray 1 and the manual feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 163 g/m2 163 g/m2 Card stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - - Labels Paper 150 g/m2 150
  • Lexmark C925 | Card Stock & Label Guide - Page 135
    feeder. Overview of card stock and label support Paper Source Automatic Paper Feeder Manual Sheet Feeder Index Bristol 163 g/m2 163 g/m2 Card Stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - - Labels Paper 163 g/m2 163 g/m2
  • Lexmark C925 | Card Stock & Label Guide - Page 136
    feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 199 g/m2 199 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover 176 g/m2 176 g/m2 For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 180 g/m2 300 g/m2
  • Lexmark C925 | Card Stock & Label Guide - Page 137
    vinyl or polyester labels or any card stock with the Optra K 1220 printer. Always feed labels from the manual feed tray or the optional multipurpose feeder. The multipurpose feeder can hold up to 30 sheets of labels. The following table lists the maximum weights supported. Printer specifications 137
  • Lexmark C925 | Card Stock & Label Guide - Page 138
    Overview of card stock and label support Paper source Multipurpose feeder Manual feed tray Card stock Index Bristol Tag - - - - For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Width: Length: Weight: 210-216 mm (8.3-8.5 in.) 279-356 mm
  • Lexmark C925 | Card Stock & Label Guide - Page 139
    feed paper; it does not support card stock and label printing. You can try occasional label printing from Tray 1, but we recommend you use the multipurpose feeder. For paper and transparency specifications, see the printer User's Guide. Tray specifications Source Multipurpose feeder 250-sheet label
  • Lexmark C925 | Card Stock & Label Guide - Page 140
    weights supported by the multipurpose tray. Overview of card stock and label support Paper source Multipurpose Tray Card stock Index Bristol Tag - - For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 128 g/m2 Vinyl - Printer specifications 140
  • Lexmark C925 | Card Stock & Label Guide - Page 141
    , S 1650, S 1855, S 2420, S 2450, S 2455, Se 3455 The following table lists the maximum weights supported by each of the printer trays. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and optional 250-sheet and 500-sheet trays 250-sheet drawer
  • Lexmark C925 | Card Stock & Label Guide - Page 142
    , see the printer User's Guide. Media specifications Labels Thickness: 0.102-0.305 mm (0.004-0.012 in.) Smoothness: 100-400* Sheffield * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation. Card stock Weight: Up to 199 g/m2 Index
  • Lexmark C925 | Card Stock & Label Guide - Page 143
    ), order print cartridge P/N 1382929. If you need additional label fuser cleaners of this type (packaged separately from the print cartridge), order P/N 43H0814. If you are duplexing other jobs, do not use the special label fuser cleaner that comes with this cartridge. Printer specifications 143
  • Lexmark C925 | Card Stock & Label Guide - Page 144
    by the multipurpose feeder. Overview of card stock and label support Paper source Multipurpose feeder Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 163 g/m2 Vinyl - Printer specifications 144
  • Lexmark C925 | Card Stock & Label Guide - Page 145
    on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and 250-sheet and 500-sheet trays optional
  • Lexmark C925 | Card Stock & Label Guide - Page 146
    short paper. For paper and transparency specifications, see the printer User's Guide. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal sizes (width x length) Source Minimum Maximum Minimum
  • Lexmark C925 | Card Stock & Label Guide - Page 147
    Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. Printer specifications 147
  • Lexmark C925 | Card Stock & Label Guide - Page 148
    " on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Optra W810 Limit label printing to occasional use of A4- or letter-size paper labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra W810 supports stocks up to 163 g/m2
  • Lexmark C925 | Card Stock & Label Guide - Page 149
    Optra W810 treats card stock the same as Plain Paper. It does not adjust the print speed or fuser temperature when the Paper Type is set to Card Stock. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain long card stock. Printer specifications 149
  • Lexmark C925 | Card Stock & Label Guide - Page 150
    increase toner buildup in the fuser. Weight in pounds of a specific number of sheets of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support itself and remain flat and straight during the printing process
  • Lexmark C925 | Card Stock & Label Guide - Page 151
    in the printer. For most Lexmark printers, the driver edge is the left edge of a portrait page. Process of raising the surface of the base material by stamping an image or design with an embossing machine. The machine has a roll with a raised image on the surface. As the print material passes
  • Lexmark C925 | Card Stock & Label Guide - Page 152
    it can cause paper feeding problems in the printer. Smoothness is measured in Sheffield points; lower values indicate smoother paper. The appearance of black specks around a printed image. Generally related to printing on stock that is too heavy or has a surface that repels toner. How well the paper
  • Lexmark C925 | Card Stock & Label Guide - Page 153
    Zone coating A finish with a rough surface similar to eggshell and antique finishes. A vellum finish is relatively absorbent, providing good ink penetration. Waviness in the stock that gives a rippled appearance to the material; generally moisture related. Placing adhesive in selected areas only
  • Lexmark C925 | Card Stock & Label Guide - Page 154
    polyester labels 28 preprinted stock 10 print volumes 8 S sizing 27 smoothness 22 stacking in output bin 29 stripped edge matrix 21, 23 supercalendering 22 T technical assistance 7, 8 temperature 9 testing print material 8 thermography inks 10 topcoats 23 troubleshooting 13 V vinyl labels 23 volume
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Card Stock & Label Guide
Laser Printers
January 2011
www.lexmark.com