Lexmark C950 IPDS Printer and Host Setup Guide
Lexmark C950 Manual
 |
View all Lexmark C950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark C950 manual content summary:
- Lexmark C950 | IPDS Printer and Host Setup Guide - Page 1
Lexmark Card for IPDS and Card for IPDS and SCS/TNe IPDS Printer and Host Setup Guide - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 2
Printer and Host Setup Guide Notices NOTICES Edition Notice Sixth Edition. April 2011, Rev 006. © Copyright Lexmark include technical inaccuracies or typographical errors. Changes are periodically made to verification of operation in conjunction with other products, programs, or services, except those - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 3
IPDS Printer and Host Setup Guide - Table of Contents TABLE OF CONTENTS Notices ...2 Table of Contents...3 Equipment Requirements and Specifications 4 Customer Support...5 1. iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server ...6 2. PSF/MVS LAN - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 4
, X652de • Lexmark X654de, X656de • Lexmark X658de • Lexmark X734de, X736de, X738de • Lexmark X860de, X862de, X864de • Lexmark X792 • Lexmark X925 • Lexmark C950 • Lexmark X950, X952, X954 • Lexmark X548 • Lexmark 6500e Unless otherwise specified, in the rest of this guide the term "printer" covers - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 5
IPDS Printer and Host Setup Guide Equipment Requirements And Specifications Customer Support If you cannot find answers in this guide about using the IPDS emulation, or require firmware updates, please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 6
receiving IPDS jobs. • Port 9600 - This port is only provided for compatibility with some older printers. NOTE: Some previous printers supported port 9100 for IPDS printing. If you are replacing a printer using port 9100, change to port 5001. Step 2 Create a PSFCFG Note: Examples showing parameters - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 7
substitution messages FNTSUBMSG Capture host fonts at printer......... FNTCAPTURE Font resolution for formatting........ FNTRSL Font mapping table FNTTBL Library Cut sheet emulation mode CSEMODE Use DBCS simulation fonts MAPIGCFNT Replace REPLACE Authority AUT Press PF9 to show the - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 8
downloaded to the printer. When set to *YES, outline fonts are downloaded to the printer. When set to *NO, raster fonts are downloaded to the printer. to the printer. Refer to the IPDS Emulation User's Guide for additional information on capturing fonts. Step 3 Create a Printer Device Description - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 9
Library Printer error message Support duplex *UNKNOWN Support color *UNKNOWN Pages per minute black *UNKNOWN Pages per minute color *UNKNOWN Location *BLANK Data streams supported *UNKNOWN + for more values Text 'Description TEXT > 'IPDS Printer' (Note: 'IPDS Printer - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 10
and Host Setup Guide iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server Example CRTDEVPRT with parameters to change shown in bold. Remote network identifier RMTNETID Workstation customizing object........ WSCST Library Authority AUT *NETATR - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 11
and Host Setup Guide iSeries and AS/400 LAN Printing Using the Printer Standard Network Port or MarkNet Internal Print Server TCP/IP Settings setting is "Auto". If you experience printing problems, set Host Resolution to "300". 3 If you are replacing a printer that used a 43xx Emulation setting, - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 12
Timer on the host or by the IPDS Timeout on the printer. 6 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If the IPDS job does not print, try the following. 1 If Busy or IPDS is not displayed in - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 13
/Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 7 Refer to Chapter 5. Printer Messages and Problems on page 31 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 13 - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 14
on MVS. • MVS Maintenance Level Required in TCP/IP Profile IBM PTF UQ03848 IBM PTF UQ11550 For an installation description please refer to the following publications: Print Services Facility/MVS: Update Guide G544-3984 Version 2, Release 2, Modification 0 Print Services Facility/MVS: System - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 15
for receiving IPDS jobs. This port is only used for receiving IPDS jobs. • Port 9600 - This port is only provided for compatibility with some older printers. NOTE: Some previous printers supported port 9100 for IPDS printing. If you are replacing a printer using port 9100, change to port 5001. 15 - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 16
and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server Step 2 Define the printer to JES a) Example for JES2 FSS(FSS1) PRT7 PROC=PSFPROC,HASPFSSM=HASPFSSM FSS=FSS1,MODE=FSS, PRMODE=(LINE,PAGE,SOSI1,SOSI2), CLASS=C,UCS=0,SEP,NOSEPDS, - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 17
and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server Example PSF STARTUP PROC - JCL and PRINTDEV. Example PSF STARTUP PROC // SAMPLE PROC // * // STEP01 EXEC PGM=APSPPIEP,REGION=4096K,TIME=1440 // STEPLIB DD DSN= - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 18
and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 1 From a Ready state press the MENU button (printers). Touch or on touch screens. 2 Use the navigation buttons or icon to scroll to Network/Ports. 3 Select Network/Ports. TIp: To do this - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 19
problems, set Host Resolution to "300". 4 If you are replacing a printer that used a 3812/3816 Emulation, select the "3812/3816" Emulation. This emulation only accepts 240 dpi resources (fonts, overlays, etc.) from the host and does not support DBCS printing. On MFPs, you can set the print priority - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 20
printer. 4 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If the IPDS job does not print block any invalid character errors. 6 If the job prints, but some characters are printed incorrectly, you should check - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 21
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 9 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 21 - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 22
9600 - This port is only provided for compatibility with some older printers. NOTE: Some previous printers supported port 9100 for IPDS printing. If you are replacing a printer using port 9100, change to port 5001. Step 2 Create a Printer in PSF/2 a) Start PSF/2 control panel by selecting the PSF - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 23
and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server b) On the PSF/2 Control Type and select Settings. The TCP/IP Settings menu appears. Enter the IP address of the printer. The IP address should be obtained from your network administrator. Enter the TCP/IP port selected - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 24
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server An OS/2 printer queue is now created and the printer is ready to print IPDS from OS/2 and a PSF/2 connected host. Note: You can check the connection using the PSF/2 Print Submitter. A number of AFP print files - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 25
and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server b) On the PSF/2 Control Panel select Profile and words this is the amount of time that PSF/2 remains active after the last job is printed. Valid values: integers 1 to 9999 1-9998 time in seconds to wait between jobs 9999 wait - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 26
and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server Step 4 Configure the Printer's Print Server TCP/IP Settings To enable IPDS printing with a Standard Network port or a MarkNet internal LAN print server, several settings must be verified. You can verify these settings from - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 27
problems, set Host Resolution to "300". 4 If you are replacing a printer that used a 3812/3816 Emulation, select the "3812/3816" Emulation. This emulation only accepts 240 dpi resources (fonts, overlays, etc.) from the host and does not support DBCS printing. On MFPs, you can set the print priority - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 28
Timer on the host or by the IPDS Timeout on the printer. 4 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If the IPDS job does not print, try the following. 1 If Busy or IPDS is not displayed in - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 29
Host Setup Guide Printer and Host Timeout Values 4. Printer and Host Timeout Values Selecting compatible values of the printer IPDS Timeout value and host release timers is very important when printing IPDS jobs. Selection of some values will cause communication problems between the printer and the - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 30
IPDS Printer and Host Setup Guide Printer and Host Timeout Values MVS host and Printer IPDS Timeout Values Printer IPDS Timeout Host Controlled Host Controlled 15 sec to 10 Min 15 sec to 10 Min STARTUP PROC STARTUP PROC Note Disconnect Interval (DISCINTV) Valid Port Number (PORTNO) Specific - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 31
message or for keywords for a problem. Message (bold) or Problem Problem Number Printer remains in Ready and message on Host 1 1510 Incorrect DLE Installation, install in the other 2 slot 34 Incorrect Media 10 1565 EMUL ERROR 9 900.40 Firmware error 15 Bad Memory System 8 Busy 3 Disk - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 32
system card. Some models require the optional firmware card to be installed in a specific connector. Problem 3: Fatal error in print queue; incorrect Busy / Timeout The print queue stops with a fatal error which requires operator intervention or the printer displays Busy or IPDS even when no IPDS - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 33
to the host. Solution to Problem 4 You need to do one or more of the following: A. Postscript or PCL resources may be saved in the printer memory. The memory cannot be used by IPDS. Set Resource Save to "Off" in the printer menu to allow permanent downloaded resources from PostScript and PCL jobs - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 34
and Host Setup Guide Printer Messages and Problems requirements on each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. D. The host may be downloading more IPDS resources than can be held in the printer's memory. Add more - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 35
with the printer code. Download the correct IPDS emulation version. See the section on support (page 5) for firmware update information. Problem 10: 34 Incorrect Media 34 Incorrect Media appears on the display Solution to Problem 10 A. Load the correct paper size and/or check tray paper guides to be - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 36
on the host. The printer supports port 5001 and 9600 for IPDS printing. Change the port number on the host to 5001 or 9600. The recommended port number for printing IPDS jobs is 5001. Problem 15: Message "900.40 Firmware error" displays when I power on the printer The printer control panel displays - Lexmark C950 | IPDS Printer and Host Setup Guide - Page 37
IPDS Printer and Host Setup Guide Printer Messages and Problems 37
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
 |
 |
Lexmark
Card for IPDS
and
Card for IPDS and SCS/TNe
IPDS Printer and Host Setup Guide