Lexmark C950 Maintenance Guide

Lexmark C950 Manual

Get Lexmark C950 PDF manuals and user guides View all Lexmark C950 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark C950 manual content summary:

  • Lexmark C950 | Maintenance Guide - Page 1
    C950 Maintenance Guide June 2011 www.lexmark.com
  • Lexmark C950 | Maintenance Guide - Page 2
    Ordering staple cartridges ...10 Ordering a maintenance kit ...11 Replacing parts and supplies...11 Replacing a maintenance kit...11 Replacing a photoconductor unit ...11 Replacing a toner cartridge...17 Replacing the waste toner bottle ...19 Replacing a staple cartridge...24 Moving the printer...32
  • Lexmark C950 | Maintenance Guide - Page 3
    damp cloth to clean the interior may cause damage to your printer. 5 Make sure the paper support and standard exit bin are dry before beginning a new print job. Cleaning the printhead lenses Clean the printhead lenses when you encounter print quality problems. 1 Open the front door. Maintaining the
  • Lexmark C950 | Maintenance Guide - Page 4
    2 Slide the release lever to the left to unlock the cover. 3 Open the cover. Warning-Potential Damage: To avoid overexposing the photoconductor unit, do not leave the cover open for more than 10 minutes. Maintaining the printer 4
  • Lexmark C950 | Maintenance Guide - Page 5
    4 Locate the printhead wipers. 5 Gently pull the printhead wipers out until it stops, and then slowly slide them back into place. Maintaining the printer 5
  • Lexmark C950 | Maintenance Guide - Page 6
    6 Close the cover. 7 Slide the release lever to the right to lock the cover. Maintaining the printer 6
  • Lexmark C950 | Maintenance Guide - Page 7
    8 Close the front door. Emptying the hole punch box 1 Open door G. 2 Pull out the hole punch box. Maintaining the printer 7
  • Lexmark C950 | Maintenance Guide - Page 8
    4 Insert the emptied hole punch box back into the finisher until it stops. 5 Close door G. Storing supplies Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you are ready to use them. Do not expose supplies to: • Direct sunlight
  • Lexmark C950 | Maintenance Guide - Page 9
    or part indicated next to each gauge. • All page life estimates for supplies assume printing on a single side of letter‑ or A4‑size plain paper. Ordering toner cartridges When 88.xx [color] cartridge low or 88.xx [color] cartridge nearly low appears, order a new cartridge. When 88 Replace [color
  • Lexmark C950 | Maintenance Guide - Page 10
    Kit Note: CMY photoconductor units may reach end of life all at the same time. Part number C950X71G C950X73G Ordering a waste toner bottle When 82.xx Waste toner bottle nearly full appears, order a replacement waste toner bottle. When 82.xx Replace waste toner bottle appears, replace the waste
  • Lexmark C950 | Maintenance Guide - Page 11
    maintenance kit are designed to be user‑replaceable. The kits come with instructions. Recommended maintenance kits and part numbers Maintenance kit 160K Maintenance Kit 320K (100 V) Maintenance Kit 320K (110 V) Maintenance Kit 320K (220 V) Maintenance Kit 480K Maintenance Kit Service part number
  • Lexmark C950 | Maintenance Guide - Page 12
    2 Rotate the release lever counterclockwise to open the cover. 3 Lower the cover. Warning-Potential Damage: To avoid overexposing the photoconductor unit, do not leave the door open for more than 10 minutes. Maintaining the printer 12
  • Lexmark C950 | Maintenance Guide - Page 13
    4 Grasp the handle of the photoconductor unit and pull it out of the machine. 5 Unpack the replacement photoconductor unit. 6 Align and insert the end of photoconductor unit. Maintaining the printer 13
  • Lexmark C950 | Maintenance Guide - Page 14
    7 Remove the tape from the top of the photoconductor unit. 8 Push the tab forward to insert the photoconductor unit. Maintaining the printer 14
  • Lexmark C950 | Maintenance Guide - Page 15
    9 Push the photoconductor unit until it clicks into place 10 Gently pull the printhead wipers out until it stops, and then slowly slide them back into place. Maintaining the printer 15
  • Lexmark C950 | Maintenance Guide - Page 16
    11 Close the cover. 12 Rotate the release lever clockwise to lock the cover. Maintaining the printer 16
  • Lexmark C950 | Maintenance Guide - Page 17
    13 Close the front door. Replacing a toner cartridge 1 Open the front door. 2 Put your hand under the dent of the toner cartridge, and then slightly lift up the cartridge. Maintaining the printer 17
  • Lexmark C950 | Maintenance Guide - Page 18
    3 Pull out the toner cartridge. 4 Unpack the replacement toner cartridge, and then shake it front‑to‑back and side‑to‑side to evenly distribute the toner. 5 Remove the red packing strip from the new cartridge. 6 Insert the new cartridge into the printer. Maintaining the printer 18
  • Lexmark C950 | Maintenance Guide - Page 19
    7 Close the front door. Replacing the waste toner bottle 1 Turn the printer off. 2 Open the front door. 3 Remove the used waste toner bottle. Maintaining the printer 19
  • Lexmark C950 | Maintenance Guide - Page 20
    4 Unpack the new waste toner bottle. 5 Insert the new waste toner bottle into the printer until it clicks into place. 6 Rotate the release lever counterclockwise to open the cover. Maintaining the printer 20
  • Lexmark C950 | Maintenance Guide - Page 21
    7 Lower the cover. 8 Slide out the printhead wipers. Maintaining the printer 21
  • Lexmark C950 | Maintenance Guide - Page 22
    9 Slide the printhead wipers back into place. 10 Close the cover. Maintaining the printer 22
  • Lexmark C950 | Maintenance Guide - Page 23
    11 Rotate the release lever clockwise to lock the cover. 12 Close the front door. 13 Turn the printer back on. Maintaining the printer 23
  • Lexmark C950 | Maintenance Guide - Page 24
    A message on the printer display indicates which staple cartridge needs to be replaced. Replacing staple cartridge in the standard stapler unit 1 Open door G. 2 Grasp the handle of the staple cartridge holder, and then pull out the holder to the right. 3 Pull the staple cartridge out of the finisher
  • Lexmark C950 | Maintenance Guide - Page 25
    4 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge. 5 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge. Maintaining the printer 25
  • Lexmark C950 | Maintenance Guide - Page 26
    6 Push the staple cartridge into the finisher until it clicks into place. 7 Close door G. Replacing staple cartridge in the booklet stapler unit Note: This task is applicable only when a booklet finisher is installed. 1 Open door G. Maintaining the printer 26
  • Lexmark C950 | Maintenance Guide - Page 27
    2 Press the handles of the staple cartridge to the right, and then take the staple cartridge unit out of the finisher. Maintaining the printer 27
  • Lexmark C950 | Maintenance Guide - Page 28
    3 Hold the tabs on both sides of the staple cartridge. Maintaining the printer 28
  • Lexmark C950 | Maintenance Guide - Page 29
    4 Rotate the booklet staple cartridge at an angle. Maintaining the printer 29
  • Lexmark C950 | Maintenance Guide - Page 30
    staple cartridge out of the unit. 6 Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge. 7 Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge. Maintaining the printer 30
  • Lexmark C950 | Maintenance Guide - Page 31
    8 Return the cartridge to its original position, and then gently push the cartridge in until it clicks into place. 9 Return the unit to its original position. 10 Close door G. Maintaining the printer 31
  • Lexmark C950 | Maintenance Guide - Page 32
    Any cart used to move the options must have a surface able to support the dimensions of the options. • Keep the printer in an upright position. • Avoid severe jarring movements. Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for a relocation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
C950
Maintenance Guide
June 2011
www.lexmark.com