Lexmark C950 Service Manual - Page 383

5058-030 • Booklet knife solenoid - This solenoid transfers the booklet folding/exit drive motor assembly to the knife through the gear. Booklet media entrance roll assembly Sensor (booklet media entrance) Booklet folding roll assembly Booklet media entrance drive motor Booklet media exit roll assembly Previous Next Go Back Sensor (booklet media exit roll assembly) Booklet folding/exit motor assembly Booklet knife solenoid • Sensor (booklet front tamper HP) - This photo sensor detects the home position of the booklet front tamper. • Sensor (booklet rear tamper HP) - This photo sensor detects the home position of the booklet Rear tamper. • Sensor (booklet compile media in) - This photo sensor detects paper present in the booklet compiler tray. - Booklet front tamper motor - This stepping motor drives the booklet front tamper. • Booklet rear tamper motor - This stepping motor drives the booklet rear tamper. • Sensor (booklet knife HP) - This photo sensor detects the home position (stored condition) of knife. • Sensor (knife folding) - This photo sensor detects the fold position (protruded condition) of knife. • Booklet staple assembly - This booklet stapler consist of two stapler units (including stapler low switch) and booklet stapler head motor. • Booklet paddle motor - This DC motor drives the paddle at the booklet section. • Sensor (booklet end guide HP) - This photo sensor detects the home position of the booklet end guide. • Booklet end guide drive motor - This stepping motor moves the booklet end guide up and down. Diagnostic aids 3-95