Lexmark C950 Service Manual - Page 392

5058-030 Media transport Media transport path Media is supplied from tray 2, tray 3 or tray 4, and is transported to the printer along the media transport path. The following is a cross section of the printer and the TTM, showing the main components directly associated with the media path and transport. Duplex media transport roll assembly MPF transport roll MPF feed roll MPF pick roll MPF separation roll Tray module transport roll assembly Tray 4 transport roll assembly Feed roll Separation roll Redrive roll Fuser 2nd transfer roll assembly Registration roll assembly Tray 1 transport roll assembly Feed roll Pick roll Separation roll Feed roll Pick roll Feed roll TRAY 1 TRAY 2 Pick roll Separation roll TRAY 3 TRAY 4 Pick roll Functions of main components When the TTM is installed under the printer, additional trays are available. Media tray assembly It is necessary to adjust the rear side guides in the media tray assembly to match the media size. Rear media guide The rear media guide can be adjusted to different media sizes by moving it to the front or rear. The guide comes into contact with the rear edge of the media and holds it in position. Previous Next Go Back 3-104 Service Manual