Lexmark C950 Service Manual - Page 58

5058-030 User status and attendance messages User primary message Explanation 61 Remove defective disk Try one or more of the following: • Touch Continue to clear the message and continue printing. • Install a different printer hard disk before performing any operations that require a printer hard disk. 62 Disk full Try one or more of the following: • Touch Continue to clear the message and continue processing. • Delete fonts, macros, and other data stored on the printer hard disk. • Install a printer hard disk with larger capacity. 63 Unformatted disk Try one or more of the following: • Touch Continue to clear the message and continue printing. • Format the printer hard disk. If the error message remains, the hard disk may be defective and require replacing. 80.xx Fuser life warning • Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part. • Touch Continue to clear the message and continue printing. 80 Replace fuser 80 Replace paper pick rollers in [paper source], use parts and instructions in tray 1 compartment 1. Replace the fuser using the instruction sheet that came with the replacement part. 2. Touch Continue to clear the message and continue printing. Try one or more of the following: • Touch Continue and replace later to ignore the message and continue printing. Note: Worn or defective paper pick rollers may cause paper jams. • Replace the worn or defective paper pick rollers, and then touch Rollers replaced to clear the message and continue printing. 80 Scheduled maintenance [x] Contact customer support, and report the message. The printer is scheduled for maintenance. 82.xx Replace waste toner bottle 82.xx Waste toner bottle missing 1. Replace the waste toner bottle. For instructions on replacing the waste toner bottle, from the printer control panel touch More Information. 2. Touch Continue to clear the message and continue printing. Reinsert the waste toner bottle into the printer. 82.xx Waste toner bottle nearly full Order a replacement waste toner bottle immediately. 1. Replace the waste toner bottle. For instructions on installing the waste toner bottle, from the printer control panel touch More Information. 2. Touch Continue to clear the message and continue printing. 84 unsupported [color] Remove the specified photoconductor, and then install a supported one. photoconductor 84.xx [color] Install the specified color photoconductor, following the instruction sheet that came photoconductor missing with the replacement part. 84.xx [color] photoconductor nearly low 1. Order a replacement photoconductor. 2. When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the replacement part. 3. Touch Continue to clear the message and continue printing. 84.xx [color] photoconductor low 1. Order a replacement photoconductor immediately. 2. When print quality is reduced, install the new photoconductor, following the instruction sheet that came with the replacement part. 3. Touch Continue to clear the message and continue printing. Previous Next Go Back 2-10 Service Manual