Lexmark CS510 Print Quality Guide

Lexmark CS510 Manual

Get Lexmark CS510 PDF manuals and user guides View all Lexmark CS510 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark CS510 manual content summary:

  • Lexmark CS510 | Print Quality Guide - Page 1
    . Are you using fonts that are supported by the printer? Step 2 Check if the fonts installed on the computer are supported by the printer. The problem is solved. Contact customer support. Are the fonts installed on the computer supported by the printer? Clipped pages or images Leading edge
  • Lexmark CS510 | Print Quality Guide - Page 2
    Is the page or image clipped? Step 4 a Remove, and then reinstall the imaging kit. Contact customer support. Warning-Potential Damage: Do not expose the imaging kit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do
  • Lexmark CS510 | Print Quality Guide - Page 3
    on the printer control panel, reduce the toner density. Note: 4 is the factory default setting. b Resend the print job. Yes The problem is solved. No Go to step 2. Did the gray background disappear? Step 2 The problem is solved. a Remove, and then reinstall the imaging kit. Warning-Potential
  • Lexmark CS510 | Print Quality Guide - Page 4
    Print quality guide Page 4 of 18 Action Yes Step 3 Go to step 4. a Remove, and then reinstall the imaging kit. Warning-Potential Damage: Do not expose the imaging kit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential
  • Lexmark CS510 | Print Quality Guide - Page 5
    problem is solved. No Contact customer support. Are the margins correct? Paper curl Action Step 1 Move the width and length guides ? Step 4 a Remove the paper from the use it. b Resend the print job. Contact customer support. Is the paper still curled? No Adjust the width and length guides
  • Lexmark CS510 | Print Quality Guide - Page 6
    guides in the tray to the correct positions for the size of the paper loaded in the tray. b Resend the print job. No The problem is solved. Do print irregularities still appear? Step 2 Go to step 3. From the printer until you use it. b Resend the print job. From the printer control Go to
  • Lexmark CS510 | Print Quality Guide - Page 7
    the imaging kit, and then resend the print job. Do print irregularities still appear? Print is too dark Print quality guide Page 7 of 18 Yes Contact customer support. No The problem is solved. Action Step 1 a From the Quality menu on the printer control panel, select Color Adjust. b Resend
  • Lexmark CS510 | Print Quality Guide - Page 8
    the imaging kit, and then resend the print job. Is the print still too dark? Yes No From the printer control Go to step 6. panel, set the paper texture in the Paper menu to match the paper loaded on the tray. Go to step 7. The problem is solved. Contact customer support. The problem is
  • Lexmark CS510 | Print Quality Guide - Page 9
    the Paper menu to match the paper loaded in the tray Go to step 7. The problem is solved. Is the print still too light? Step 7 Replace the imaging kit, and then resend the print job. Contact customer support. The problem is solved. Is the print still too light? Printer is printing blank pages
  • Lexmark CS510 | Print Quality Guide - Page 10
    customer support. Is the printer still printing blank pages? Printer is printing solid black pages No The problem is solved. The problem is solved. Action Yes Step 1 Go to step 2. a Remove, and then reinstall the imaging kit. Warning-Potential Damage: Do not expose the imaging kit to
  • Lexmark CS510 | Print Quality Guide - Page 11
    quality guide Page imaging kit, and then resend the print job. Do the repeating defects still appear? Shadow images appear on prints Leading edge AABBCCDD AABBCCDD Trailing edge Contact customer support support at http://support.lex mark.com or your service representative. The problem is solved.
  • Lexmark CS510 | Print Quality Guide - Page 12
    Replace the imaging kit, and then resend the print job. Contact customer support. Do shadow images still appear on prints? Skewed print No Load paper with the correct paper type and weight in the tray. Change the paper type and weight to match the paper loaded in the tray. The problem is solved
  • Lexmark CS510 | Print Quality Guide - Page 13
    prints? Step 2 Go to step 3. From the printer control panel, set the paper type and weight in Remove, and then reinstall the imaging kit. Warning-Potential Damage: Do not expose the imaging kit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems
  • Lexmark CS510 | Print Quality Guide - Page 14
    guide Page 14 of 18 Action Step 5 Replace the imaging kit, and then resend the print job. Do streaked horizontal lines appear on prints? Yes Contact customer support use it. b Resend the print job. Do streaked vertical lines appear on prints? Go to step 4. No The problem is solved. No The problem
  • Lexmark CS510 | Print Quality Guide - Page 15
    the imaging kit, and then resend the print job. Contact customer support. Do streaked vertical lines appear on prints? Toner fog or background shading appears on prints No The problem is solved. The problem is solved. ABCDE ABCDE ABCDE Action Yes Step 1 The problem is solved. a Remove, and
  • Lexmark CS510 | Print Quality Guide - Page 16
    the tray. Is the paper type for the tray set to Transparency? Step 2 a Check if you are using a recommended type of transparency. b Resend the print job. Contact customer support. Is the print quality still poor? No Set the paper type to Transparency. The problem is solved. Uneven print density
  • Lexmark CS510 | Print Quality Guide - Page 17
    the imaging kit, and then resend the print job. Is the print density uneven? Vertical voids appear on prints Leading edge Print quality guide Page 17 of 18 Yes Contact customer support. No The problem is solved. Trailing edge Action Step 1 a Check if your software program is using a correct
  • Lexmark CS510 | Print Quality Guide - Page 18
    your printer problem or provide assistance through Assisted Service where the service representative can remotely connect to your computer through the Internet to troubleshoot problems, install updates, or complete other tasks to help you successfully use your Lexmark product. Telephone support is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
Print quality guide
If the solutions here do not correct the problem, then contact customer support.
Characters have jagged or uneven edges
Action
Yes
No
Step 1
a
Print a font sample list to check if the fonts you are using are supported by
the printer.
1
From the printer control panel, navigate to any of the following:
•
>
Reports
>
Print Fonts
•
Settings
>
Reports
>
Print Fonts
2
Select
PCL Fonts
or
PostScript Fonts
.
b
Resend the print job.
Are you using fonts that are supported by the printer?
Go to step 2.
Select a font that is
supported by the printer.
Step 2
Check if the fonts installed on the computer are supported by the printer.
Are the fonts installed on the computer supported by the printer?
The problem is solved.
Contact
customer
support
.
Clipped pages or images
Leading edge
Trailing edge
ABCDE
ABCDE
ABCDE
Print quality guide
Page 1 of 18