Lexmark CX310 Print Defects Guide
Lexmark CX310 Manual
View all Lexmark CX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark CX310 manual content summary:
- Lexmark CX310 | Print Defects Guide - Page 1
with this guide. Use these pages for assistance in determining which part is defective. • The imaging kit is a customer replaceable part. If the transfer module or fuser needs replacement, then contact customer support at http://support.lexmark.com or your Lexmark service representative. Replace - Lexmark CX310 | Print Defects Guide - Page 2
37.7 mm (1.48 in.) Replace the transfer module 55.0 mm (2.17 in.) 78.5 mm (3.09 in.) Print defects guide Page 2 of 7 Replace the fuser 95 mm (3.74 in.) - Lexmark CX310 | Print Defects Guide - Page 3
Print defects guide Page 3 of 7 - Lexmark CX310 | Print Defects Guide - Page 4
Print defects guide Page 4 of 7 - Lexmark CX310 | Print Defects Guide - Page 5
Print defects guide Page 5 of 7 - Lexmark CX310 | Print Defects Guide - Page 6
Print defects guide Page 6 of 7 - Lexmark CX310 | Print Defects Guide - Page 7
Print defects guide Page 7 of 7
Print defects guide
Identifying supplies or parts for replacement
Match a set of repeating defects on a printed page to the marks on one of the vertical lines. The line that best matches the defects
on the page indicates which particular part is causing the defect.
Notes:
•
There are four additional color pages and a blank page that prints with this guide. Use these pages for assistance in
determining which part is defective.
•
The imaging kit is a customer replaceable part. If the transfer module or fuser needs replacement, then contact customer
support at
or your Lexmark service representative.
Replace the imaging kit
Replace the developer unit
25.1 mm
(0.99 in.)
29.8 mm
(1.17 in.)
94.2 mm
(3.70 in.)
43.9 mm
(1.72 in.)
45.5 mm
(1.79 in.)
Print defects guide
Page 1 of 7