Lexmark E360 Card Stock & Label Guide

Lexmark E360 Manual

Get Lexmark E360 PDF manuals and user guides View all Lexmark E360 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark E360 manual content summary:

  • Lexmark E360 | Card Stock & Label Guide - Page 1
    Card Stock & Label Guide Laser Printers January 2011 www.lexmark.com
  • Lexmark E360 | Card Stock & Label Guide - Page 2
    technical inaccuracies or typographical errors. Changes are periodically made services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www.lexmark
  • Lexmark E360 | Card Stock & Label Guide - Page 3
    notice 2 Overview...7 Introduction...7 General information 8 Paper and label Industry...8 Print volumes...8 Print material testing...8 Design factors...9 Pick roller technology...11 Maintenance procedures...13 Troubleshooting...13 Card stock 15 Weight...15 Grain orientation...16 Coatings...17
  • Lexmark E360 | Card Stock & Label Guide - Page 4
    Lexmark C910...52 Lexmark C912...53 Lexmark C920...55 Lexmark C925...56 Lexmark C935...58 Lexmark E120...59 Lexmark E220...61 Lexmark E230, E232, E234(n), E330, and E332n 62 Lexmark E238, E240, E240n, E340, and E342n 63 Lexmark E250, E350, and E450n...64 Lexmark E260, E260d, E260dn, E360d, E360dn
  • Lexmark E360 | Card Stock & Label Guide - Page 5
    , X656de, and X658de 109 Lexmark X734, X736, and X738...113 Lexmark X782...115 Lexmark X790...117 Lexmark X850, X852e, and X854e...119 Lexmark X860e, X862e, and X864e...121 Lexmark X925...124 Lexmark X940 and X945...126 Optra plus, 4039, 4029, 4019, WinWriter 600 printers 127 Optra C...130 Optra
  • Lexmark E360 | Card Stock & Label Guide - Page 6
    6
  • Lexmark E360 | Card Stock & Label Guide - Page 7
    Overview Introduction Lexmark has many years of experience in successful card stock and label testing and education programs with print material vendors and converters. This document provides guidelines to help you select appropriate print materials for the following Lexmark laser printers. Model
  • Lexmark E360 | Card Stock & Label Guide - Page 8
    . Exclusive printing of labels, for example, may result in more frequent service calls. Proper printer maintenance helps alleviate these problems. For information about maintaining your printer, see "Maintenance procedures" on page 13. Print material testing Choosing print materials can seem complex
  • Lexmark E360 | Card Stock & Label Guide - Page 9
    bond. Thicker paper means less paper can be placed in a tray, and paper that is heavier and more dense may cause paper jams or feed reliability problems in some printers. Check the supported paper weights table located in the printer documentation to verify that the paper basis weight being used is
  • Lexmark E360 | Card Stock & Label Guide - Page 10
    in.). Lighter materials, such as paper labels and some integrated forms, are more likely to have printing problems if curl is present. Most label manufacturers recommend printing in a temperature range of 18-24°C (65-75°F) with relative humidity of 40-60%. Lexmark printers are designed to operate in
  • Lexmark E360 | Card Stock & Label Guide - Page 11
    to have installed a maintenance kit as specified (if applicable) • use of printing media outside of Lexmark specifications • use of non-Lexmark supplies (such as toner cartridges and/or inkjet cartridges) • use of non-Lexmark product or component Pick roller technology Some printers have an auto
  • Lexmark E360 | Card Stock & Label Guide - Page 12
    For the following printers, make sure perforations fall outside the 0.3-0.79-inch area on the leading edge of the media: Optra S, Optra T, T520, T522, T620, T622, T630, T632, T634,
  • Lexmark E360 | Card Stock & Label Guide - Page 13
    this cleaning process every time you replace the black cartridge, more often with some media. Failure to follow maintenance procedures for your printer could cause jamming, poor print quality, feeding problems, and fuser problems. Troubleshooting The following table provides solutions for some
  • Lexmark E360 | Card Stock & Label Guide - Page 14
    to printing problems Problem Solution Print on heavy stock is blurred or out of focus. Toner rubs off the page. Make sure the Paper Type setting paper to remove any toner that may have accumulated. Make sure the Paper Type setting is appropriate for your print material. Use a lighter weight
  • Lexmark E360 | Card Stock & Label Guide - Page 15
    to pull the toner onto the paper properly, resulting in poor print quality. To determine if your printer is able to print on cover stock, locate your printer in the "Printer specifications" chapter and review the supported paper type information. You can also view the supported paper types in the
  • Lexmark E360 | Card Stock & Label Guide - Page 16
    70 - - 108 29 - 40 - - 50 - - - - - - 118 31 80 - - 120 32 - - - 131 35 90 - - - - 67 74 problems. Curl may decrease the ability of the form to move reliably through the printer. Most printers feed paper short edge first. If your printer supports larger paper sizes
  • Lexmark E360 | Card Stock & Label Guide - Page 17
    See the individual printer specifications in "Printer specifications" on page 30 for more information paper, not glossy card stock, is acceptable for some printers). Paper smoothness also affects print quality. If the paper is too rough, the toner does not fuse to the paper properly; if the paper
  • Lexmark E360 | Card Stock & Label Guide - Page 18
    by print shops to prevent printed pages from sticking together. Powder is usually sprayed on the printed page right before it reaches the stacker on the offset printing press. This powder provides an intermediate layer between two sheets of paper, preventing ink from transferring from one sheet to
  • Lexmark E360 | Card Stock & Label Guide - Page 19
    other critical problems, such as labels peeling off and causing jams in the printer, or the label or adhesive melting if the sheet stops in the fuser during a paper jam. Review label designs with a converter or vendor who is knowledgeable about labels and laser printer characteristics to ensure
  • Lexmark E360 | Card Stock & Label Guide - Page 20
    or buildup. Contamination adversely affects paper feeding and causes paper jams in the printer. We recommend labels used for duplexing printer, thereby preventing any adhesive contamination in the printer. The following graphics show the rib locations for the Optra S, Optra T, and Lexmark
  • Lexmark E360 | Card Stock & Label Guide - Page 21
    addition, you can use the wiper to simplex paper labels and duplex paper in the same printer. When ordering a new cartridge, be sure to order the cartridge that includes the correct fuser wiper. Label components Labels are composed of three basic parts: the liner, the adhesive, and the face sheet
  • Lexmark E360 | Card Stock & Label Guide - Page 22
    C920 • Lexmark E230, E232, E234(n), E330, E332n, E260, E360, E460, toner contamination inside the printer and improve feed performance. Slick, non-porous liners are harder to feed and increase toner buildup in the fuser and on the backup roll. Rough backings, on the other hand, can increase paper
  • Lexmark E360 | Card Stock & Label Guide - Page 23
    components. If the sheet jams in the fuser, the adhesive can melt, thereby contaminating parts of the printer or releasing fumes. To avoid exposing adhesive to the paper path guides, drive rollers, charge roller, photoconductor drum, transfer roller, and detack fingers, use full label sheets
  • Lexmark E360 | Card Stock & Label Guide - Page 24
    vary ±0.5 mm. Stripped edge matrix guidelines Face type Total weight of label Paper* (cut sheet or dual web) 140-180 g/m2 driver edge Using cut sheet labels with adhesive applied to the edge of the sheet will contaminate your printer and your cartridge and could void your printer and cartridge
  • Lexmark E360 | Card Stock & Label Guide - Page 25
    Leading Edge 8.5 in. 215.9 mm Waste strip 0.25 in (6.35 mm) Non-print area 0.33 in. 8.38 mm 0.5 in. Top perforation 12.7 mm Waste strip Driver edge 11 in. 279.4 mm 0.06 in. 1.6 mm Perforation end Liner edge 0.33 in. 8.38 mm Non-print area 0.25 in. 6.35 mm Non-print
  • Lexmark E360 | Card Stock & Label Guide - Page 26
    The following diagram shows a recommended label design for the T640 and T650 laser printers. Labels 26
  • Lexmark E360 | Card Stock & Label Guide - Page 27
    ) Cut sheet paper labels • Generally, cut sheet paper labels work well with your printer. • Coating or sizing to make the paper liquid-resistant decreases toner adhesion and increases the risk of toner contaminating the fuser. At a minimum, paper labels should be equivalent in weight and rigidity
  • Lexmark E360 | Card Stock & Label Guide - Page 28
    in the paper tray. Orient the form in the tray so that the pressure-sensitive area feeds into the printer first. printer, which will require printer servicing. For more information on recommended label designs, see "Label design guidelines" on page 23. • For Optra S, Optra T, and Lexmark T printers
  • Lexmark E360 | Card Stock & Label Guide - Page 29
    the form in the tray so the pressure-sensitive portion feeds into the printer first. • Due to the unique construction of integrated forms, you may experience stacking problems in the output bin. Contact your Lexmark marketing representative if you experience stacking problems with these forms. Note
  • Lexmark E360 | Card Stock & Label Guide - Page 30
    to occasional use of paper office labels designed for laser printers. The Lexmark C500n does not support vinyl or polyester labels. The Lexmark C500n supports 90-210-g/m2 (24-55-lb) stock. Card stock and labels are supported from Tray 1 and Tray 2. Tray 1 supports approximately 120 sheets of
  • Lexmark E360 | Card Stock & Label Guide - Page 31
    C510 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C510 does not support vinyl or polyester labels. The Lexmark C510 supports stocks up to 176 g/m2. Feed labels from the standard tray only, which holds up to 80 sheets of labels or up to
  • Lexmark E360 | Card Stock & Label Guide - Page 32
    label printing to occasional use of paper office labels designed for laser printers. The Lexmark C520, C522, and C524 do not support vinyl or polyester labels. The Lexmark C520, C522, and C524 support stocks up to 176 g/m2. Card stock is supported from Tray 1, Tray 2, the manual feed slot, and the
  • Lexmark E360 | Card Stock & Label Guide - Page 33
    synthetic facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the
  • Lexmark E360 | Card Stock & Label Guide - Page 34
    quality, always set Paper Type to Card Stock. For more information, see "Pick roller technology" on page 11. Lexmark C530, C532, and C534 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C530, C532, and C534 do not support vinyl or polyester
  • Lexmark E360 | Card Stock & Label Guide - Page 35
    synthetic facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the
  • Lexmark E360 | Card Stock & Label Guide - Page 36
    more information, see "Pick roller technology" on page 11. Lexmark C540, C543, C544, and C546dtn Notes: • Your printer may not have a 650-sheet duo drawer with an integrated multipurpose feeder. • The 250-sheet tray (Tray 1) and the 650-sheet duo drawer support the same paper sizes and types. • Not
  • Lexmark E360 | Card Stock & Label Guide - Page 37
    use of paper office labels designed for laser printers. The Lexmark C540, C543, C544, and C546dtn do not support vinyl or polyester labels. The Lexmark C540, C543, C544, and C546dtn support card stock weights up to 176 g/m2. Card stock and labels are supported from Tray 1, Tray 2, the manual feeder
  • Lexmark E360 | Card Stock & Label Guide - Page 38
    "Pick roller technology" on page 11. Lexmark C720 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C720 does not support vinyl or polyester labels. The Lexmark C720 supports stocks up to 43 lb (163 g/m2). Feed labels from the standard tray only
  • Lexmark E360 | Card Stock & Label Guide - Page 39
    Overview of card stock and label support Paper source Tray 1 (standard tray) Index Bristol 163 g/m2 Card stock Tag 163 g/m2 Cover - For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 163 g/m2 - Media specifications Labels Card stock Width: 105-
  • Lexmark E360 | Card Stock & Label Guide - Page 40
    • For the best print quality, always set the Paper Type to Card Stock. Lexmark C734 and C736 Lexmark C734 and C736 support card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, the multipurpose tray, and an optional 550-sheet specialty media drawer. Note: The optional
  • Lexmark E360 | Card Stock & Label Guide - Page 41
    facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Weight: Up to 199 g/m2 Index Bristol (110 lb) Up to 203 g/m2 Tag (125 lb) Weight: Up to 216 g/m2 (80 lb) For more information on the supported media sizes, see the printer User's Guide on
  • Lexmark E360 | Card Stock & Label Guide - Page 42
    C750 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. The Lexmark C750 paper feeding mechanism uses advanced technology that enhances feeding reliability. The Lexmark C750 trays, which hold
  • Lexmark E360 | Card Stock & Label Guide - Page 43
    area must enter the printer first. For paper and transparency specifications, see the Lexmark C750 Publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal sizes (width x length) Source
  • Lexmark E360 | Card Stock & Label Guide - Page 44
    roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C752 The Lexmark C752 prints on many labels designed for use with laser printers. The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m2 paper
  • Lexmark E360 | Card Stock & Label Guide - Page 45
    must enter the printer first. For paper and transparency specifications, see the Lexmark C752 Publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal sizes (width x length) Source
  • Lexmark E360 | Card Stock & Label Guide - Page 46
    in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C760 and C762 Printer
  • Lexmark E360 | Card Stock & Label Guide - Page 47
    Lexmark C760 and C762 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2,000-sheet drawer supports paper only. Print material specifications Range or maximum weight
  • Lexmark E360 | Card Stock & Label Guide - Page 48
    to Card Stock in the Paper Menu. • Do not use creased card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 48
  • Lexmark E360 | Card Stock & Label Guide - Page 49
    Lexmark C770, C772, C780, and C782 print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview of card stock support Paper
  • Lexmark E360 | Card Stock & Label Guide - Page 50
    the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C790 Lexmark C790 prints on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose
  • Lexmark E360 | Card Stock & Label Guide - Page 51
    the same paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. Print
  • Lexmark E360 | Card Stock & Label Guide - Page 52
    • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C910 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C910 supports stocks up
  • Lexmark E360 | Card Stock & Label Guide - Page 53
    occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C912 supports stocks up to 216 g/m2. The following table lists the maximum weights supported by the standard tray and the multipurpose feeder. Printer specifications 53
  • Lexmark E360 | Card Stock & Label Guide - Page 54
    or from MarkVision Professional, set the Paper Type to Card Stock in the Paper Menu. Set the CardStock Weight (under the Paper Weight menu) to Heavy. • Download the vinyl file, vinyl8ppm.npa, from our FTP site and send it to the printer (copy the file to the printer port). Printer specifications 54
  • Lexmark E360 | Card Stock & Label Guide - Page 55
    printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C920 supports stocks up to 216 g/m2. The following table lists the maximum weights supported by the standard tray and the multipurpose feeder. Overview
  • Lexmark E360 | Card Stock & Label Guide - Page 56
    , always set the Paper Type to Card Stock in the Paper Menu. Lexmark C925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The trays and the multipurpose feeder support card stock. The
  • Lexmark E360 | Card Stock & Label Guide - Page 57
    m2 256 g/m2 Overview of label support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 g/m2 Labels Vinyl in.) Weight: Up to 216 g/m2 Card stock and label guidelines When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu
  • Lexmark E360 | Card Stock & Label Guide - Page 58
    occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to 220 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of
  • Lexmark E360 | Card Stock & Label Guide - Page 59
    for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E120 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual sheet
  • Lexmark E360 | Card Stock & Label Guide - Page 60
    support Paper source Tray 1 Manual feed Card stock Index Bristol 135-163 g/m2 (up to 90 lb) 135-163 g/m2 (up to 90 lb) Labels Paper 60-163 g/m2 (16-43 lb) 60-163 g/m2 (16-43 lb) For paper and transparency specifications, see the Lexmark printing degradation. Card stock Weight: Up to 163 g/m2
  • Lexmark E360 | Card Stock & Label Guide - Page 61
    laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E220 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual stock Weight:
  • Lexmark E360 | Card Stock & Label Guide - Page 62
    weights supported by Tray 1 and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Manual feed Index Bristol - 163 g/m2 Card stock Tag - 163 g/m2 Cover - - Labels Paper 90 g/m2 90 g/m2 Vinyl - - For paper and transparency specifications, see the Lexmark
  • Lexmark E360 | Card Stock & Label Guide - Page 63
    lists the maximum weights supported by Tray 1, Tray 2, and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Index Bristol - Card Stock Tag - Cover - Tray 2 - - - Manual Feed 163 g/m2 163 g/m2 - Note: The E238 printer does not support a second drawer
  • Lexmark E360 | Card Stock & Label Guide - Page 64
    The printer supports paper and label stock from 60-90 g/m2 and index card stock up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one sheet at a time. The following table lists the maximum weights supported by Tray 1, Tray 2, and
  • Lexmark E360 | Card Stock & Label Guide - Page 65
    Lexmark E260, E260d, E260dn, E360d, E360dn, E460dn, E460dw, and E462dtn Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and label stock from 60-90 g/m2 and index card stock up
  • Lexmark E360 | Card Stock & Label Guide - Page 66
    laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E320 and Lexmark E322 support stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual
  • Lexmark E360 | Card Stock & Label Guide - Page 67
    laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E321 and Lexmark E323 support stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual
  • Lexmark E360 | Card Stock & Label Guide - Page 68
    in the standard tray or over 30 label sheets in the multipurpose feeder. Warning-Potential Damage: Feeding labels from print media sources that are not supported may damage your printer. For paper and transparency specifications, see the Lexmark T420 Publications CD. Printer specifications 68
  • Lexmark E360 | Card Stock & Label Guide - Page 69
    side faceup and the top edge going in first. For the tray, load labels with the recommended print side facedown. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver, the Local Printer Setup Utility, or MarkVision. • Do not use preprinted card stock manufactured
  • Lexmark E360 | Card Stock & Label Guide - Page 70
    For more information, see "Maintenance procedures" on page 13. Lexmark T430 The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We do not recommend using vinyl or polyester labels. The Lexmark T430 supports stocks from 60-163 g/m2 (16-
  • Lexmark E360 | Card Stock & Label Guide - Page 71
    used. Unlike other printers, do not remove the leading or driver edge. • The perforation locations may impact printer reliability. Note: Test any perforated card stock or paper before purchasing large quantities. • Portrait orientation is preferred, especially when printing bar codes. • Do not use
  • Lexmark E360 | Card Stock & Label Guide - Page 72
    Maintenance procedures" on page 13. Lexmark T520, T522 The Lexmark T520 and T522 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays lb) Labels Paper 180 g/m2 (48 lb bond) 163 g/m2 (43 lb bond) Dual-web paper 180 g/m2
  • Lexmark E360 | Card Stock & Label Guide - Page 73
    and transparency specifications, see the printer publications CD. The following table indicates the paper sizes each tray supports. Paper Source specifications for all media Standard sizes (width x length) Universal sizes (width x length) Source Minimum Maximum Minimum Maximum Standard
  • Lexmark E360 | Card Stock & Label Guide - Page 74
    Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T620, T622 Printer
  • Lexmark E360 | Card Stock & Label Guide - Page 75
    The Lexmark T620 and T622 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print Material Multipurpose feeder4 and optional
  • Lexmark E360 | Card Stock & Label Guide - Page 76
    paper, reliably feeds all media tested according to the guidelines specified under "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 7-inch forms, Lexmark offers a variety of special media trays and drawers. Note: Optional 250-sheet Universally Adjustable Trays support forms
  • Lexmark E360 | Card Stock & Label Guide - Page 77
    "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T630, T632, T634 The Lexmark T630, T632, and T634 print on many labels designed for use with laser printers. The following table lists the maximum weights
  • Lexmark E360 | Card Stock & Label Guide - Page 78
    area must enter the printer first for grain short paper. For paper and transparency specifications, see the publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal sizes (width x length
  • Lexmark E360 | Card Stock & Label Guide - Page 79
    -Sheet Universally Adjustable Tray 400-Sheet Universally Adjustable Tray + Drawer Part number 11K1572 11K1573 11K1574 11K1878 11K1921 11K1922 11K1941 11K1942 Card stock and label guidelines Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be
  • Lexmark E360 | Card Stock & Label Guide - Page 80
    Paper Type to Card Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer
  • Lexmark E360 | Card Stock & Label Guide - Page 81
    , T644 The Lexmark T640, T642, and T644 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Card stock Labels Grain Index Dual-web Paper source
  • Lexmark E360 | Card Stock & Label Guide - Page 82
    400-Sheet Universally Adjustable Tray + Drawer Part number 20G1237 20G1230 20G1236 20G1229 20G1224 20G1223 20G1240 20G1239 20G1227 20G1226 20G1217 20G1218 Card stock and label guidelines Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be used
  • Lexmark E360 | Card Stock & Label Guide - Page 83
    " on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T650, T652, T654, and T656dne The Lexmark T650, T652, T654, and T656dne print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the
  • Lexmark E360 | Card Stock & Label Guide - Page 84
    250 and 550 sheets of bond paper and reliably feeds all media tested according to the guidelines specified under "Dimensions" on page 9. For difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 200-sheet Universally
  • Lexmark E360 | Card Stock & Label Guide - Page 85
    in the same paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When
  • Lexmark E360 | Card Stock & Label Guide - Page 86
    on page 13 • "Troubleshooting" on page 13 Lexmark W812 The Lexmark W812 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Card stock Labels Paper
  • Lexmark E360 | Card Stock & Label Guide - Page 87
    Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W820 supports stocks up to 163 g/m2. Always feed labels and card stock from Tray 1, 2, or 3, each of which can hold up to 250
  • Lexmark E360 | Card Stock & Label Guide - Page 88
    letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W840 supports stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2, or the multipurpose feeder. The following table lists the maximum weights supported by
  • Lexmark E360 | Card Stock & Label Guide - Page 89
    . Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: Up to 216 g/m2 Card stock and label guidelines When printing on labels: • Set the Paper Type to Labels from the printer driver. • Use standard-size products (either A4 or Letter). • Do not use label sheets with a slick
  • Lexmark E360 | Card Stock & Label Guide - Page 90
    letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W850 supports stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2 or the multipurpose feeder. The following table lists the maximum weights supported by
  • Lexmark E360 | Card Stock & Label Guide - Page 91
    the machine more than once. • Load labels into the manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver. • Do not use preprinted card stock manufactured with chemicals
  • Lexmark E360 | Card Stock & Label Guide - Page 92
    paper tray. The Lexmark X203n and X204n printer models support stocks up to 90 g/m2 (24 lb). Note: The smallest supported Universal size is 76 x 127 mm (3 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.). The following table lists the maximum weights supported by the paper tray and the manual
  • Lexmark E360 | Card Stock & Label Guide - Page 93
    X215 The Lexmark X215 prints on paper office labels designed for use with laser printers. Labels can be fed only from the manual bypass feeder. Card stock and labels must be fed one sheet at a time through the manual bypass feeder. The following table lists the maximum weights supported by the
  • Lexmark E360 | Card Stock & Label Guide - Page 94
    of card stock support Card stock Paper source Index Bristol Manual bypass feeder* Up to 163 g/m2 (90 lb) * Card stock can be fed only from the manual bypass feeder. Tag Up to 163 g/m2 (100 lb) For paper and transparency specifications, see the Lexmark X215 User's Guide. Cover - Media
  • Lexmark E360 | Card Stock & Label Guide - Page 95
    print no more than 20 pages of paper labels a month. The printer and duplex path support paper and label stock from 60-90 g/m2 (16-24 lb). The multipurpose and manual feeders support card stock up to 163 g/m2 (43 lb). You can load up to 50 label sheets in the standard tray. Card stock must be sent
  • Lexmark E360 | Card Stock & Label Guide - Page 96
    , remove a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non-oozing adhesive. • Portrait orientation works best, especially when printing bar codes. When printing on card stock: • Make sure the Paper Type is Card Stock. • Select the Paper Texture setting. Printer specifications
  • Lexmark E360 | Card Stock & Label Guide - Page 97
    , see "Maintenance procedures" on page 13. Lexmark X422 The Lexmark X422 prints on many labels designed for use with laser printers. Card stock is supported from the multipurpose feeder, and labels are supported from the standard tray. The following table lists the maximum weights supported. Note
  • Lexmark E360 | Card Stock & Label Guide - Page 98
    tray with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver Lexmark X463de, X464de, X466dte, and X466dtwe Limit label printing to occasional use of paper office labels designed for laser printers
  • Lexmark E360 | Card Stock & Label Guide - Page 99
    the multipurpose feeder. The following table lists the maximum weights supported by the standard tray, optional 250- and 550-sheet trays, and multipurpose and manual feeders. Overview of card stock and label support Paper source Standard tray Index Bristol - Card Stock Tag - Optional 250-sheet
  • Lexmark E360 | Card Stock & Label Guide - Page 100
    . For more information, see "Maintenance procedures" on page 13. Lexmark X500 and X502n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark X500 and X502n do not support vinyl or polyester labels. The Lexmark X500 and X502n support 90-210 g/m2 (24
  • Lexmark E360 | Card Stock & Label Guide - Page 101
    Tag (100 lb) Weight: Up to 210 g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD. Lexmark X543, X544, and X546dtn Limit label printing to occasional use of paper office labels designed for use with laser printers. Lexmark X543, X544, and
  • Lexmark E360 | Card Stock & Label Guide - Page 102
    tray. Combining print materials can cause feeding problems. • Use only letter-, A4-, or legal-size full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge
  • Lexmark E360 | Card Stock & Label Guide - Page 103
    X560 The Lexmark X560 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card stock
  • Lexmark E360 | Card Stock & Label Guide - Page 104
    Do not use card stock that is creased. It may cause paper jams. Lexmark X642e The Lexmark X642e prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is
  • Lexmark E360 | Card Stock & Label Guide - Page 105
    feeding reliability. The standard Lexmark X642e tray holds 250 or 500 sheets of bond paper and reliably feeds all media tested according to the guidelines specified under "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special
  • Lexmark E360 | Card Stock & Label Guide - Page 106
    Paper Type to Card Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer
  • Lexmark E360 | Card Stock & Label Guide - Page 107
    print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card stock Labels Grain Paper source
  • Lexmark E360 | Card Stock & Label Guide - Page 108
    250 or 500 sheets of bond paper and reliably feed all media tested according to the guidelines specified under "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 250-sheet Universally
  • Lexmark E360 | Card Stock & Label Guide - Page 109
    on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark X651de, X652de, X654de, X656de, and X658de The Lexmark X651de, X652de, X654de, X656de, and X658de print on many labels designed for use with laser printers. The following table lists the maximum weights supported
  • Lexmark E360 | Card Stock & Label Guide - Page 110
    hold 250 or 550 sheets of bond paper, and reliably feed all media tested according to the guidelines specified under "Dimensions" on page 9. For difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Notes: • The X658de does not offer
  • Lexmark E360 | Card Stock & Label Guide - Page 111
    in the same paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When
  • Lexmark E360 | Card Stock & Label Guide - Page 112
    Paper Type to Card Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer
  • Lexmark E360 | Card Stock & Label Guide - Page 113
    of card stock or labels. The following tables list the maximum weights supported. Overview of card stock support Paper source Standard 550-sheet tray (Tray 1) Optional 550-sheet tray Optional 550-sheet specialty media drawer Multipurpose tray Card stock (grain long/grain short) Index Bristol Tag
  • Lexmark E360 | Card Stock & Label Guide - Page 114
    facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Weight: Up to 199 g/m2 Index Bristol (110 lb) Up to 203 g/m2 Tag (125 lb) Weight: Up to 216 g/m2 (80 lb) For more information on the supported media sizes, see the printer User's Guide on
  • Lexmark E360 | Card Stock & Label Guide - Page 115
    Lexmark X782 The Lexmark X782 can print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview of card stock support Paper
  • Lexmark E360 | Card Stock & Label Guide - Page 116
    control panel, set Paper Type to Card Stock in the Paper Menu. • Do not use creased card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 116
  • Lexmark E360 | Card Stock & Label Guide - Page 117
    Lexmark X790 Lexmark X790 supports card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, and the multipurpose feeder. Note: The optional 2,000-sheet drawer does not support card stock or labels. Overview of card stock support Paper source Standard and optional 550-
  • Lexmark E360 | Card Stock & Label Guide - Page 118
    for use with laser printers. To prevent specialty media sheets from sticking together, remove each sheet from the exit bin as it is printed. Card stock and label guidelines When printing on labels: • Set Paper Type to Labels from the printer driver. • Use standard-size products (either A4
  • Lexmark E360 | Card Stock & Label Guide - Page 119
    entering the printer first. Lexmark X850, X852e, and X854e Limit label printing to occasional use of paper office labels designed for laser printers. Paper labels are supported in Tray 1, Tray 2, and the manual bypass feeder. The following table lists the maximum weights supported. Note: Scanning
  • Lexmark E360 | Card Stock & Label Guide - Page 120
    for use with laser printers. To prevent specialty media sheets from sticking together, remove each sheet from the output bin as it is printed. Card stock and label guidelines When printing on labels: • Set the Paper Type to Labels from the printer driver. • Use standard-size products (either A4
  • Lexmark E360 | Card Stock & Label Guide - Page 121
    -size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark X860e, X862e, and X864e support stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2 or the multipurpose feeder. The following table lists the maximum weights
  • Lexmark E360 | Card Stock & Label Guide - Page 122
    . Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: Up to 216 g/m2 Card stock and label guidelines When printing on labels: • Set the Paper Type to Labels from the printer driver. • Use standard-size products (either A4 or Letter). • Do not use label sheets with a slick
  • Lexmark E360 | Card Stock & Label Guide - Page 123
    • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Printer specifications 123
  • Lexmark E360 | Card Stock & Label Guide - Page 124
    Lexmark X925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Trays and the multipurpose feeder support card stock. The multipurpose feeder supports card stocks up to 256 g/m2. Always
  • Lexmark E360 | Card Stock & Label Guide - Page 125
    Overview of label support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 g/m2 Labels Vinyl Not applicable Occasional use up to 256 g/m2 Media specifications Labels Card stock Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: 120-128 g/m2
  • Lexmark E360 | Card Stock & Label Guide - Page 126
    printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X940 and X945 support stocks up to 220 g/m2. Always feed labels and card stock from Tray 1, 2, or 3. We recommend printing on grain long card
  • Lexmark E360 | Card Stock & Label Guide - Page 127
    , WinWriter 600 printers The following table lists the maximum weights supported by each of the special card stock and label trays, as well as the manual feed tray. Overview of card stock and label support Paper source 200-sheet heavy duty tray 500-sheet tray (450 grams) 500-sheet tray (550 grams
  • Lexmark E360 | Card Stock & Label Guide - Page 128
    information on the optional trays available for your printer. Note: If you use materials with a weight over 135 g/m2 (36 lb bond), print registration and skew may be unpredictable. Card stock and labels supported (11-inch card stock and label trays) Media Paper/card stock 1 Pressure-sensitive
  • Lexmark E360 | Card Stock & Label Guide - Page 129
    and lower) Upper and Lower: All supported media Upper and Lower: All supported media 1 Select the appropriate tray according to the part of the form (pressure-sensitive area or paper base) that enters the printer first when feeding from the tray. 2 Grain long is recommended. Media specifications
  • Lexmark E360 | Card Stock & Label Guide - Page 130
    instructions on how to properly clean your printer. Removing debris helps improve paper feeding and fuse grade. • See your printer documentation for other maintenance procedures to maintain the print quality and reliability of your printer. For more information, see "Troubleshooting" on page
  • Lexmark E360 | Card Stock & Label Guide - Page 131
    Card stock and labels are not supported from any of the paper trays. For paper and transparency specifications, see the printer User's Guide. Optra C710 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels.
  • Lexmark E360 | Card Stock & Label Guide - Page 132
    coating or sizing applied to make the labels liquid-resistant. • Do not use labels that have exposed adhesive on the label sheets. When printing on card stock: • We recommend using Springhill Index Plus 90 lb card stock. • For the best print quality, always set the Paper Type to Card Stock. Printer
  • Lexmark E360 | Card Stock & Label Guide - Page 133
    table lists the maximum weights supported by the multipurpose feeder. Overview of card stock and label support Paper source Multipurpose feeder Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 135 g/m2
  • Lexmark E360 | Card Stock & Label Guide - Page 134
    weights supported by Tray 1 and the manual feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 163 g/m2 163 g/m2 Card stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - - Labels Paper
  • Lexmark E360 | Card Stock & Label Guide - Page 135
    Overview of card stock and label support Paper Source Automatic Paper Feeder Manual Sheet Feeder Index Bristol 163 g/m2 163 g/m2 Card Stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - - Labels Paper 163 g/m2 163 g/m2 Vinyl - - Media
  • Lexmark E360 | Card Stock & Label Guide - Page 136
    weights supported by Tray 1 and the manual feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 199 g/m2 199 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover 176 g/m2 176 g/m2 For paper and transparency specifications, see the printer User's Guide
  • Lexmark E360 | Card Stock & Label Guide - Page 137
    see "Maintenance procedures" on page 13. Optra K 1220 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels or any card stock with the Optra K 1220 printer. Always feed labels from the manual feed tray or the
  • Lexmark E360 | Card Stock & Label Guide - Page 138
    Overview of card stock and label support Paper source Multipurpose feeder Manual feed tray Card stock Index Bristol Tag - - - - For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Width: Length: Weight: 210-216 mm (8.3-8.5 in.) 279-356 mm
  • Lexmark E360 | Card Stock & Label Guide - Page 139
    only be used to feed paper; it does not support card stock and label printing. You can try occasional label printing from Tray 1, but we recommend you use the multipurpose feeder. For paper and transparency specifications, see the printer User's Guide. Tray specifications Source Multipurpose feeder
  • Lexmark E360 | Card Stock & Label Guide - Page 140
    table lists the maximum weights supported by the multipurpose tray. Overview of card stock and label support Paper source Multipurpose Tray Card stock Index Bristol Tag - - For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 128 g/m2 Vinyl
  • Lexmark E360 | Card Stock & Label Guide - Page 141
    table lists the maximum weights supported by each of the printer trays. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and optional 250-sheet and 500-sheet trays 250-sheet drawer Paper (grain long) Xerographic or business paper 60-176 g/m2
  • Lexmark E360 | Card Stock & Label Guide - Page 142
    printing degradation. Card stock Weight: Up to 199 g/m2 Index Bristol (90 lb) Up to 203 g/m2 Tag (100 lb) The following table indicates the paper sizes each tray supports. Paper source specifications for all media Source 250-sheet tray 500-sheet tray Standard sizes (width x length) Minimum
  • Lexmark E360 | Card Stock & Label Guide - Page 143
    to convey general guidelines for tray and drawer selection. The material type, rigidity, sizing, perforations, die-cuts, and surface influence the performance reliability. The duplex option supports all paper weights and types that the printer supports, except for transparencies and envelopes
  • Lexmark E360 | Card Stock & Label Guide - Page 144
    cartridge replacements are needed. Print cartridge with label fuser cleaner Print cartridge part number 1382929 PrebateTM (cartridge for special label machine use) For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting
  • Lexmark E360 | Card Stock & Label Guide - Page 145
    lb) Optra T The Optra T prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and 250-sheet
  • Lexmark E360 | Card Stock & Label Guide - Page 146
    page 16 for specific recommendations. 2 Pressure-sensitive area must enter the printer first for grain short paper. For paper and transparency specifications, see the printer User's Guide. The following table indicates the paper sizes each tray supports. Paper stock Weight: Up to 199 g/m2 Index Bristol
  • Lexmark E360 | Card Stock & Label Guide - Page 147
    specified under "Dimensions" on page 9. For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 250-sheet Universally Adjustable Trays designed for the Lexmark T printer family support forms with a minimum length
  • Lexmark E360 | Card Stock & Label Guide - Page 148
    see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Optra W810 Limit label printing to occasional use of A4- or letter-size paper labels designed for laser printers. We do not recommend using
  • Lexmark E360 | Card Stock & Label Guide - Page 149
    . Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • Set the Paper Type to Plain Paper. The Optra W810 treats card stock the same as Plain Paper. It does not adjust the print speed or fuser temperature when the Paper Type is set to Card Stock
  • Lexmark E360 | Card Stock & Label Guide - Page 150
    are harder to feed and increase toner buildup in the fuser. Weight in pounds of a specific number of sheets of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support itself and remain flat and straight
  • Lexmark E360 | Card Stock & Label Guide - Page 151
    paper through the paper path (as opposed to printers that center paper in the path), the edge of the print material that is positioned next to the hardware reference and that is driven by the rollers in the printer. For most Lexmark printers, the driver edge is the left edge of a portrait page
  • Lexmark E360 | Card Stock & Label Guide - Page 152
    matrix Supercalendering Talkers Tenting Thermography Ties Toner Total strip matrix The mechanical action the printer performs to remove one sheet of material from the tray. The roller that assists in picking a sheet of material from the tray. See "Release" on page 152. The ability of adhesive to
  • Lexmark E360 | Card Stock & Label Guide - Page 153
    Zone coating A finish with a rough surface similar to eggshell and antique finishes. A vellum finish is relatively absorbent, providing good ink penetration. Waviness in the stock that gives a rippled appearance to the material; generally moisture related. Placing adhesive in selected areas only
  • Lexmark E360 | Card Stock & Label Guide - Page 154
    labels 28 laser printers 7 liners 21 M maintenance procedures 13 manufacturers 8 matrix defined 151 stripped edge 23 total strip 24, 23 metallics 11 Index 154 moisture content 151 N notices 2 O oil bleed 29 orientation 11 P paper dust 22, 130 perforations 10 pick roller 11 polyester labels
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Card Stock & Label Guide
Laser Printers
January 2011
www.lexmark.com