Lexmark E360d Service Manual - Page 34
-430, Warning, Message, Action, All settings in the Parallel Menu, Network Menu, - toner cartridge
View all Lexmark E360d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4513-420, -430 User attendance messages (Continued) Message Prog System Code DO NOT POWER OFF Ready Remove Paper Standard Bin Resetting Maint Cnt Valu Resetting PC Cnt Value Resetting the Printer Res Reduced Restoring Factory Defaults Std Bin Full Toner Low Tray Missing USM Waiting Action The printer is programming new system code. Wait for the message to clear and the printer to reset. Warning: Do not turn the printer off while this message is displayed. Send a job to print. The standard output bin is full. The printer is resetting the counter that tracks wear on the fuser. The printer is resetting the counter that tracks wear on the photoconductor. Wait for the message to clear. The printer is reducing the resolution of a page in the current job from 600 dots per inch (dpi) to 300 dpi to prevent a 38 Memory Full error. Res Reduced remains on the display while the job prints. Wait for the message to clear. Note: When factory default settings are restored: • All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted. • All menu settings return to the factory default except: - The Display Language setting in the Setup Menu - All settings in the Parallel Menu, Network Menu, and USB Menu The standard bin is full. • Replace the toner cartridge. • Press to clear the message and continue printing. Insert the tray into the printer. The printer is processing data through the specified USB port. The printer has received a page of data to print, but is waiting for an End of Job command, a Form Feed command, or additional data. • Press to print the contents of the buffer. • Cancel the current job. 2-8 Lexmark™ E360d, E360dn