Lexmark E360d Service Manual - Page 75

Output bin tests, Base sensor test (B. sensor test), Feed Tests, Sensor Test

Get Lexmark E360d PDF manuals and user guides View all Lexmark E360d manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

4513-420, -430 Output bin tests The Output bin tests setting is used to test the printer's output bins and its sensors. Feed Tests This test verifies that the media from the printer's default input source feeds to the specific output bin. Press to select Single, or press and to select Continuous. The Single test feeds one sheet of media to the default output bin. No buttons are active during this test. The Continuous test feeds media to the default output bin until is pressed. The indicator light blinks green, and the operator panel displays [Select Output Bin] Feeding... while either of these tests perform. Sensor Test This test verifies that the selected output bin's sensors are working correctly. The following sensors are available in each output bin: Output bin Full sensor Near full sensor Passthru 1 sensor Passthru 2 sensor Standard bin  x x x -bin Mailbox x x   *This sensor will register the following levels: "empty," "normal," "near full," and "full. Level sensor* x  Press to select this test from the Output bin tests menu, and then press again to select the desired output bin. Closed will display on the operator panel if the sensor is closed. Open will display on the operator panel if the sensor is open. If the wrong message is displayed, then the sensor is malfunctioning. To exit the Sensor Test, press or . Base sensor test (B. sensor test) The Base Sensor Test verifies the correct functioning of the following sensors: • Input • Sensor Tests • Front Door • Standard bin • S1 • S2 • Fuser Exit • C-TMC • M-TMC • Y-TMC • K-TMC This test toggles each of these sensors. If a sensor does not toggle, then the sensor is malfunctioning. To exit the Base Sensor Test, press or . Diagnostic aids 3-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
Diagnostic aids
3-11
4513-420, -430
Output bin tests
The
Output bin tests
setting is used to test the printer’s output bins and its sensors.
Feed Tests
This test verifies that the media from the printer’s default input source feeds to the specific output bin. Press
to select
Single,
or press
and
to select
Continuous.
The
Single
test feeds one sheet of media to
the default output bin. No buttons are active during this test. The
Continuous
test feeds media to the default
output bin until
is pressed. The indicator light blinks green, and the operator panel displays
[Select
Output Bin] Feeding...
while either of these tests perform.
Sensor Test
This test verifies that the selected output bin’s sensors are working correctly. The following sensors are available
in each output bin:
Press
to select this test from the
Output bin tests
menu, and then press
again to select the desired
output bin.
Closed
will display on the operator panel if the sensor is closed.
Open
will display on the operator
panel if the sensor is open. If the wrong message is displayed, then the sensor is malfunctioning. To exit the
Sensor Test
, press
or
.
Base sensor test (B. sensor test)
The
Base Sensor Test
verifies the correct functioning of the following sensors:
•
Input
•
Sensor Tests
•
Front Door
•
Standard bin
•
S1
•
S2
•
Fuser Exit
•
C-TMC
•
M-TMC
•
Y-TMC
•
K-TMC
This test toggles each of these sensors. If a sensor does not toggle, then the sensor is malfunctioning. To exit
the
Base Sensor Test
, press
or
.
Output bin
Full sensor
Near full sensor
Passthru 1
sensor
Passthru 2
sensor
Level sensor*
Standard bin
x
x
x
x
-bin Mailbox
x
x
*This sensor will register the following levels: “empty,” “normal,” “near full,” and “full.