Lexmark E360d Service Manual - Page 85
ACM pick tire roller removal
View all Lexmark E360d manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
4513-420, -430 ACM pick tire roller removal 1. Place the printer on its side. Note: Be careful to not mar the finish of the printer. 2. Open the duplex jam door just far enough to pull out the ACM pick tires. Warning: Open the duplex door only far enough to remove the ACM pick tires. If the door is opened too far, then it can become disengaged and interfere with the paper tray. The tray may go in but will not come out, and will render the printer as non-serviceable. 3. After the ACM pick tires have been pulled out, close the duplex door. Repair information 4-3
Repair information
4-3
4513-420, -430
ACM pick tire roller removal
1.
Place the printer on its side.
Note:
Be careful to not mar the finish of the printer.
2.
Open the duplex jam door just far enough to pull out the ACM pick tires.
Warning:
Open the duplex door only far enough to remove the ACM pick tires. If the door is opened too far,
then it can become disengaged and interfere with the paper tray. The tray may go in but will not
come out, and will render the printer as non-serviceable.
3.
After the ACM pick tires have been pulled out, close the duplex door.