Lexmark E450DN Help Menu Pages
Lexmark E450DN - E 450dn B/W Laser Printer Manual
 |
View all Lexmark E450DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark E450DN manual content summary:
- Lexmark E450DN | Help Menu Pages - Page 1
from the printer by properly loading the trays, and setting the types and sizes for media. Loading paper General guidelines • Do not overload the media sources. • Make sure the stack height does not exceed the maximum height indicated by the labels on the guides. Overloading may cause jams. • Never - Lexmark E450DN | Help Menu Pages - Page 2
. 5 Load print media in the tray. Note: Load letterhead paper with the design side facing down. The top edge of the sheet with the logo should be placed at the front of the tray. Make sure the print media is below the max fill tabs on the side guides. Overloading may cause jams. - Lexmark E450DN | Help Menu Pages - Page 3
Printing guide Page 3 of 5 6 Squeeze the side guide tab, and slide the guide until it lightly rests against the edge of the media. 7 Insert the tray. 8 Extend the paper support on the output bin. - Lexmark E450DN | Help Menu Pages - Page 4
Printing guide Page 4 of 5 Extending the tray for legal or folio size paper To load legal or folio size paper, extend the paper tray. You may also attach an optional dust cover on the back of the printer to protect the tray while it is extended. 1 Press down on the latch at the back of the - Lexmark E450DN | Help Menu Pages - Page 5
these instructions to print on specialty media. 1 Load the print media as specified for the tray being used. See "Loading paper" on page 1 for help. 2 From the printer control panel, set the Paper Type and Paper Size according to the media you loaded. For more information, see the User's Guide on - Lexmark E450DN | Help Menu Pages - Page 6
Page 1 of 1 Supplies guide The following table lists the part numbers for ordering supply items: Part number Description Average cartridge yield World Wide E250X22G Photoconductor kit Up to 30,000 standard pages1 For the USA and Canada3 E450A21A Print Cartridge 6,000 standard pages2 - Lexmark E450DN | Help Menu Pages - Page 7
guide The printer supports the following print media sizes. Select custom sizes up to the maximum specified for the Universal setting. Legend: - supported Media size Dimensions ✘- unsupported 250-sheet tray Manual 216 x 330 mm (8.5 x 13 in.) Statement mm (6.93 x 9.84 in.) ✘ ✘ - Lexmark E450DN | Help Menu Pages - Page 8
too tightly against the stack of print media. • Make sure all cables that connect to the printer are correctly attached. See the Setup sheet for more information. • If a jam occurs, clear the entire media path. See the User's Guide on the Software and Documentation CD for information on the media - Lexmark E450DN | Help Menu Pages - Page 9
side of a single-sided print job, replace the toner cartridge before replacing the fuser. Replace the toner cartridge Developer roll Photoconductor defect defect 47.8 mm (1.88 in.) 96.8 mm (3.81 in.) Replace the fuser Backup roller defect Fuser belt defect 95.5 mm (3.76 in.) 79.8 mm - Lexmark E450DN | Help Menu Pages - Page 10
, see the Menus and Messages Guide on the Software and Documentation CD. Some menu items may not be available based on the printer model or options installed. Paper Menu Default Source Paper Size/Type Substitute Size Paper Texture Paper Weight Paper Loading Custom Types Universal Setup Reports - Lexmark E450DN | Help Menu Pages - Page 11
on a screen will not be applied if you press the Back button. 2 Menu 3 Stop Press the Menu button to open the menu index. Note: The printer must be in the Ready state to access the menu index. A message indicating the menus are unavailable will appear if the - Lexmark E450DN | Help Menu Pages - Page 12
The lights indicate whether the printer power is on, the printer is busy, idle, processing Power is off. Printer is on, but idle. Printer is warming up, current state of the printer and indicating possible printer problems you must resolve. The you view printer status, supplies messages, show-me screens, - Lexmark E450DN | Help Menu Pages - Page 13
provides information about loading media, ordering supplies, troubleshooting, clearing jams, and removing options. It also includes administrative support information. The Menus and Messages Guide provides information to change the printer settings. It describes the menus available, the menu items - Lexmark E450DN | Help Menu Pages - Page 14
6 Close the drivers CD installer application. 7 Connect the USB or parallel cable. If using USB, be sure to match the USB symbol on the cable to the USB symbol on the printer. Note: Windows 98 SE, Windows Me, Windows 2000, Windows XP, and Windows Server 2003 operating systems support USB connections - Lexmark E450DN | Help Menu Pages - Page 15
guide Page 2 of 2 Installing printer and software for network printing using Windows 1 Make sure the printer is turned off and unplugged from the wall outlet. 2 Connect the printer to a LAN drop or hub using an ethernet cable that is compatible with your network. 3 Plug one end of the printer - Lexmark E450DN | Help Menu Pages - Page 16
printer. • Disconnect all cords and cables from the printer before moving it. • Remove the optional tray before moving the printer. Note: Damage to the printer printer in an upright position. • Any cart used to move the printer must have a surface able to support the full footprint of the printer.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Printing guide
Page 1 of 5
Printing guide
Get the most from the printer by properly loading the trays, and setting the types and sizes for media.
Loading paper
General guidelines
•
Do not overload the media sources.
•
Make sure the stack height does not exceed the maximum height indicated by the labels on the guides.
Overloading may cause jams.
•
Never mix media types within a tray.
Loading standard 250-sheet tray
Do not remove a tray while a job is printing or while the control panel indicator light is blinking. Doing so may
cause a jam.
1
Remove the tray.
Note:
To load legal or folio size paper, extend the length of the paper tray. See “Extending the tray for legal
or folio size paper” for instructions.