Lexmark E460 Forms and Bar Code Technical Reference

Lexmark E460 Manual

Get Lexmark E460 PDF manuals and user guides View all Lexmark E460 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark E460 manual content summary:

  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 1
    Forms and Bar Code Card Technical Reference Manual March 2009 www.lexmark.com
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 2
    and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 3
    /or its subsidiaries Microsoft Corporation All other trademarks are the property of their respective owners. © 2009 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 4
    8 HP BarDIMM compatibility intercept 8 Supported Lexmark PCL5 & PostScript Bar Codes 8 Chapter 4: PCL5 emulation: HP 12 One-dimensional bar codes 12 Defining characteristics 12 Command structure considerations 12 Transparent print data command 13 Returning
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 5
    for MaxiCode data 28 Chapter 5: PCL5 emulation: Lexmark 29 New PCL5 commands to support bar codes 29 Bar code descriptor ESC&x#W[descriptor data 29 Transfer bar code data ESC&y#W[bar code data 29 Compatibility safeguard 29 Lexmark symbology assignments 31 One-dimensional bar codes 32 Post
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 6
    94 Data types ...95 Data filters ...96 Forms Card font support 96 Bubble font 97 Determine printable characters 99 Printing errors 99 Forms files on printer directory 100 Appendix A: Feature Summary 101 Appendix B: Supported Bar Codes 104 Appendix C: Forms Card Fonts 128 Single-Byte
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 7
    common to all symbologies 149 String errors 149 Errors specific to symbologies 151 Appendix F: Deviations 153 Code 93 uppercase vs. lowercase 153 Codabar uppercase vs. lowercase 153 Maximum encodable character length 154 Four-state
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 8
    Print Port Setting-Allows a user to select which of the printer input ports the FormsMerge DLE performs merging on. - Local Port Timeout-Allows a user to select a timeout value for forms jobs that come in on any of the local ports (such as, serial, USB, or parallel). • Support for the following new
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 9
    's Guide • Visual Bar Code Designer, a software utility that puts most of this document's detail into a user-friendly bar code design graphical interface to easily generate PCL5 and PostScript data • SAP R/3 device types and associated installation instructions • Some demonstration and test files
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 10
    BarDIMM Pro products) 2 Using special Lexmark advanced PCL5 commands for bar codes Most of the bar code symbologies supported by the Forms and Bar Code begins at the bottom left corner of the left bar. • The cursor is located at the bottom right corner of the right bar when printing is complete. •
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 11
    . Visual Bar Code Designer Use the Visual Bar Code Designer program found on the CD to build PCL5, PostScript, and hex of the HP BarDIMM Pro version 3.3a option. Supported Lexmark PCL5 & PostScript Bar Codes The following is a list of supported one-dimensional bar codes: • Australian Post 4-state
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 12
    • Code 3 of 9 space encoding • Code 3 of 9 space encoding with check digit • Code 93 • Code 93 extended • Danish PTT 3 of 9 • Dutch Post 4-state bar code • EAN/JAN-8 • EAN/JAN-8 with 2-digit supplemental • EAN/JAN-8 with 5-digit supplemental • EAN/JAN-13 • EAN/JAN-13 with 2-digit supplemental • EAN/
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 13
    POSTNET 11-digit Delivery Point Code • USPS Expanded POSTNET • USPS Tray label, 10-digit 2 of 5 • USPS Sack label, 8- • PDF417 • QR Lexmark-Unique PCL5 Command Description Support of new bar code number of bytes of bar code data. Compatibility Safeguard These two new commands, if sent to an HP printer
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 14
    of these commands and to ignore them in a bar code context. To avoid this conflict, use the PCL5 Lexmark enhancement switch. Setting or not setting this switch would allow a future Lexmark PCL5 emulation to decide which way to interpret the new escape sequences. The switch is a GL/2 command. HP
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 15
    and Bar Code Card. An additional Lexmark-specific section is found immediately following this one of those given, special bar code generation firmware processes the font selection command. If the typeface Esc(s#V Esc(s#B Esc(s#S Characteristic Determines location of human-readable text printed with
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 16
    following the bar code selection command, where "•" is the character associated with decimal code 7 in the PC-8 symbol set Returning to normal text printing To ensure a proper return from bar code printing to normal text printing, PCL5 emulation escape sequences that generate bar codes must be
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 17
    sequences Command Esc(s#P or AEC)s#P Function/Parameters Determines the location of human-readable text printed with the bar code. 0 4 = Print text under bar code 5 = Print text above bar code Add the numbers listed below to produce the corresponding effect: 10 = 10 = 20 = 100 = Prints
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 18
    Command Esc(s#H or AEC)s#H Esc(s#V or AEC)s#V Function/Parameters Selects the font used for human-readable text. The numeric value of # is of the form ABC, where: A = style 0 = Default (bold) 1 = Regular 2 = Italic 3 = Bold 4 = Bold Italic B = size 0 = Automatic font size (default) C =
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 19
    Command Esc(s#1,#2,#3,#4B or AEC)s#1,#2,#3,#4B Esc(s#1,#2,#3,#4S or AEC)s#1,#2,#3,#4S Function/Parameters Selects bar widths in dots (1/600 inch). Some bar codes, such as Interleaved 2 of 5 and Code 3 of 9, require only two values for this command. Others, such as UPC, EAN and Code 128, require
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 20
    Characters encoded Symbol 2 length Checksum character PCL5 Function parameter list Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") Selects the bar code symbology. Default parameters 1 AEC)s#T Typeface # Bar code symbology #v #p #b1, #b2, #b3, #b4, s1
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 21
    symbology #v #p #b1, #b2, #b3, #b4, s1 s2 s3 s4 24643 German Postal 2 of 5 Identcode 72.0 124 10 30 - - N 11 24644 USPS tray label, 10-digit 2 of 50.4* 4 9 27 - - N 10 5 24645 USPS sack label, 8-digit 2 of 50.4* 1 9 27 - - N 8 5 24650 Industrial 2 of 5 28.8 1 6 18 - - N - 24651
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 22
    Characters encoded Symbol 2 length Checksum character Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") (continued) Selects the bar code symbology. Default parameters 1 AEC)s#T Typeface # Bar code symbology #v #p #b1, #b2, #b3, #b4, s1 s2 s3 s4 24710
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 23
    encoding table values are opposite those found in Encoding Table field byte 7 of the Lexmark bar code descriptor for Australia 4-State Postal bar codes (see the section "PCL5 emulation: Lexmark" on page 29 of this manual). Human-readable text is never printed with these bar codes. In relation to the
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 24
    24. The default value is 22. USPS Zebra code The USPS Zebra code is a series of diagonal or vertical lines. These lines are placed to the right of a USPS tray label bar code to aid in visually identifying trays containing bar coded mail. The lines should each be from 0.250 inch (6.35 mm
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 25
    (s0p4.5h0s0b4099T Esc&k2H///////// ///////// Esc&k2H||||||||| ||||||||| Selects PC-8 symbol set Selects 4.5 cpi fixed-space Courier font Prints encodes the full 14-digit EAN/UCC item identification in a linear symbol that can be scanned omnidirectionally by suitably programmed pointof-sale
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 26
    scanned omnidirectionally. Note: The RSS Stacked Omnidirectional bar code is not supported by the Forms and Bar Code Card. Field Name Esc (s#T readable. Max: There is no maximum value but larger barcodes may use up too much memory. 8,16,24,32 (dec) or 8,10,18,20 (hex) Description Required. •
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 27
    Default 1=No HRT 2=Embedded 3=Half-Embedded 4=Under 0 (dec) or 00 (dec) Description Optional. Selects the width of the spaces. Optional. Defines the HRT Location. Note: HRT is not available on RSS-14 Stacked. Notes: • The default V parameter observed for the HP BarDIMM Pro ver 3.3A is: - Standard
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 28
    is no max value for B1, but larger barcodes may use up too much memory. Description Required. 24840T Optional. Selects bar height. Bar height in 1/72", same of this Technical Reference.) Requested number of rows in the Codablock F symbol. Optional. Requested number of columns in the Codablock
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 29
    number s16,2,20v24840T The Bar widths (B parameter) is documented by HP in their reference manual, but varying B1 or B2 does not affect the bar width of the is no maximum value but larger barcodes may use up too much memory. Description Required. 24820T Optional. Small module height in dots (1/
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 30
    number of columns for the symbol; range is 1-30 Optional; determines the X-value of the symbol aspect ratio Optional; determines the Y-value of the symbol aspect ratio 0 = Parameters #1 and #2 will equal the size needed for the PDF parameter is not used to manually set rows and columns. Lexmark bar
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 31
    ECC level as follows: • 0 = Default ECC level (error correction level M of 15%) • 1 = Low ECC/ number-of-labels field, and a mode field. All three of these fields are one digit in length and are terminated with either a comma or Group Separator (GS, ASCII 29). In relation to the fields of the Lexmark
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 32
    to support bar codes Support of new bar code functionality (for example, two-dimensional symbology PDF417) requires new Lexmark-unique is flushed. The number of bytes of descriptor data is indicated by #. Compatibility safeguard These two new commands, if sent to an HP printer, are flushed and
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 33
    02]ESC&y8W12345678 The general strategy for assigning new Lexmark symbology IDs and defining new Lexmark bar code descriptors is defined in the following one-dimensional symbologies, as described: Field name Symbology ID Text Location Text Typeface Bytes 2 1 1 Text Style 1 Bar Dimension
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 34
    width in bar dimension units (#b4 parameter) Fourth space width in bar dimension units (#s4 parameter) Lexmark symbology assignments This table describes both new and existing Lexmark symbology assignments: Bar code type 2-D bar code 2-D bar code 2-D bar code 4-state postal 4-state postal 4-state
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 35
    bar code descriptors (Lexmark) Bar code descriptor 16-19 (hex) 22-25 (dec) 18 (hex) 24 (dec) Sets the number of bars that print per inch 4 Tracker Height 64-A0 (hex) 100-160 (dec an error. Invalid characters in the customer information string will be flagged with an error. Length errors in
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 36
    3 Bar Pitch 14-18 (hex) 20-24 (dec) 16 (hex) 22 (dec) Sets the number of bars that print per inch 4 Tracker Height 66-98 (hex) 102 -152 (dec) 7F characters or lengths will be flagged with an error. String lengths of 4 characters imply a BRS license number. One-dimensional bar codes 33
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 37
    Bar Pitch 14-18 (hex) 20-24 (dec) 16 (hex) 22 (dec) Sets the number of bars that print per inch 4 Tracker Height 66-98 (hex) 102-152 (dec) 7F and the tracker height 6-15 Reserved Note: All seven code formats are supported. The format will be implied on the type of data received. Embedded
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 38
    included, is ignored. • Any hyphens included as part of the block and house number information are encoded as data in the bar code. • Invalid characters or lengths in the postal code will be flagged with an error. • Invalid characters in the block and house number information will be flagged with an
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 39
    following this format. • Invalid characters or lengths in the post code, house/postbox/freepost number, house number extension, country code, or foreign postcode will be flagged with an error. USPS Facing identification marking (FIM) Byte 0-1 2-15 Field name Symbology IDs Reserved Range Default
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 40
    Swiss Postal Byte 0-1 Field name Symbology ID Range 2 Text Location This value is fixed. 3 Text Typeface This value is fixed. 4 Text Style This value is fixed. 5 Bar Height Units 00-04 (hex) 0-4 (dec) 6 - 7 8 Bar Height
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 41
    2-digit post code, • a 2-digit billing district code, • a 6-digit customer account number, and • an 8-digit item number. To enhance readability, "." characters (ASCII 46) may appear anywhere in the data; they in the identification code will be flagged with an error. One-dimensional bar codes 38
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 42
    ISBN, ISBN+5 Byte 0-1 2 3 4 5 Field name Symbology IDs Text Location Text Typeface Text Style Bar Height Units Range 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-04 (hex) 0-4 (dec) 00-04 (hex) 6 - 7 Bar Height 8
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 43
    Default value 05 (hex) 5 (dec) Description Specifies location of ISBN text: 0 = Use default value 1 The ISBN checksum digit is not verified or replaced by a calculation in the Forms and Bar tenth digit position) in the data produces an error message. Cursor positioning is handled the same as for
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 44
    ISSN, ISSN+2, ISSN+5 Byte 0-1 2 3 4 5 Field name Symbology IDs Text Location Text Typeface Text Style Bar Height Units Range 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-04 (hex) 0-4 (dec) 00-04 (hex) 6 - 7 Bar Height 8
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 45
    (hex) 5 (dec) Description Specifies location of ISSN text: 0 = Use default by a special "land of serial publications" country code (977), and checksum digit is not verified or replaced by a calculation in the Forms position) in the data produces an error message. Cursor positioning is handled the
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 46
    HIBC 39/128 Byte Field name 0-1 Symbology ID 2 HRT Location 3 HRT Typeface 4 HRT Style 5 Bar Height Units Type int int int int int Range Default value Description n/a n/a Required. • 00 70 (hex) or 112 (dec) specifies
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 47
    Byte Field name 6-7 Bar Height 8 Bar/Space Width Units 9-10 Bar Width #1 (Code 128 bar 1, or Code 39 Narrow) 11-12 Space Width #1 (Code 128 space 1, or Code 39 Narrow) Type int int int int Range Default value Description 150-600 (dec) • 240 (dec) or • 00 F0 (hex) Optional. Corresponds to
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 48
    ITF-14 Byte Field name 0-1 Symbology ID 2 HRT Location 3 HRT Typeface 4 HRT Style 5 Bar Height Units 6-7 Bar Height Type Range Default value Description int int n/a • 103 (dec) or • 00 67 (hex) Required. Specifies ITF-
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 49
    Byte 8 Field name Bar/Space Width Units 9-10 Bar Width #1 11-12 Space Width #1 13-14 Bar Width #2 (Wide) Type Range Default value Description int 0=default • 0 or 2 (dec) Optional. (1/600" units) or 1=1/300" units • 00 or 02 (hex) Specifies units for Bar and Space widths. 2=1/600"
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 50
    Byte Field name 15-16 Space Width #2 (Wide) 17-31 Reserved Type Range Default value Description [int int] 27-72 (dec) or 00 1B-00 48 (hex) Note: The range of values for Space Width 2 is dependent on the value of Space Width 1, where, Min = 2.25 x Space Width 1 Max = 3 x Space Width 1 Note: The
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 51
    Two-dimensional bar codes Bar code descriptor for PDF417 (Lexmark) Bytes 0-1 MSB LSB Range Symbology Symbology n/a ID byte 1 ID byte 2 (00x) (03x) 2-3 Reserved Units 0=Default 1=1/300" units 2=1/600" units 3=1/1200" units 4-5 X X 240-12000 (dec) dimension
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 52
    not specified, the Y dimension will become double that of the X dimension. Rows Columns Rows: 4-44 (dec) Columns: 1-4 (dec) • 0 (dec) Optional. or • 00 (hex) Manually set the number of symbol rows. Automatic operation specified by using 0. See Section 9.5.3 Row and Column Boundary Conditions
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 53
    00x 01x 02x 03x 04x 05x 06x 07x 08x Number of error code words 2 4 8 16 32 64 128 in specifying the X Dimension (the smallest element width). Supported values are 01x for 300 dpi units, 02x for 600 Default = 00x) This can be used to manually set the number of symbol rows. Both rows and columns must
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 54
    be built with 6 columns (90 codewords / 15 rows). Note: When manually setting the number of symbol rows and columns, rows and columns must be no more than bytes 1 and 2: (Default = 0000x) These two bytes designate error correction levels by percentage. Valid percentage values range from 0% to 400%.
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 55
    04x 05x 06x Description Structured carrier message with numeric postal code Structured carrier message with alphanumeric postal code Standard symbol with standard error correction Full symbol with enhanced error correction Reader program with standard error correction Two-dimensional bar codes 52
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 56
    message follows the class of service for modes 2 and 3. For modes 4, 5, and 6, the message follows the number-of-labels field. MaxiCode examples that the symbol may only be produced within specific row, column and error correction codeword combinations, up to a maximum of four data columns by
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 57
    widths are permitted, each specifying the number of data columns (1 - 4). Within each symbol width a variable number of rows (4 - 44) modes. The support of NULL (hex 00) characters is not supported at this time, due to possible issues with string termination within the printer. The basic block
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 58
    , the Y dimension will become double that of the X-dimension. 0 (dec) or 00 (hex) Optional. Manually set the number of symbol rows. Automatic operation specified by using 0. Manually set the number of symbol columns. Automatic operation specified by using 0. Bar code descriptor for MicroPDF417 55
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 59
    compatibility with linear- and area-CCD scanners, and with linear and rastering laser scanners. The following bar codes allow the addition of a two-dimensional printed just below the bar code, as observed above. a Number System: The number system is a single digit which identifies the "type" of
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 60
    assigned by the UCC, the manufacturer is free to assign product codes to each of their speed, print imperfections, or a host of other problems, it is useful to verify that the rest generally used on products with very small packaging where a full UPC-A barcode couldn't reasonably fit. A UPC-E code
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 61
    encoded with odd and even parity from the left-hand columns of the EAN-13 character. The parity used for each character depends on the number system (0 or 1) and the check digit from the original UPC-A barcode. 3 EAN-8 (including +2 and +5 variants) EAN-8 is the EAN equivalent of UPC-E in the sense
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 62
    -13 bar code has the following physical structure: a Left-hand guard bars, or start sentinel, encoded as 101. b The second character of the number system code, encoded as described below. c The five characters of the manufacturer code, encoded as described below. d Center guard pattern, encoded as
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 63
    data represents. It has a list of "Application Identifiers" (AI) to include additional data such as best before dates, batch numbers, quantities, weights and many other attributes needed by the user. Each AI tells the system what kind of data will follow and in what format. UCC-128 has the benefit
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 64
    encodes the full 14-digit EAN/UCC item identification in a linear symbol that can be scanned omnidirectionally by suitably programmed point-of- the user. The sequence stands for ESCape, or 1Bh. For example, this is a RSS-14 Composite bar code sequence: (s36b24810T01234567890123|Lexmark<
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 65
    PCL Specifications for composite bar codes Field Name Type Range Default (if not specified) Definition Symbology ID int - - Required. 24600T specifies UPC-A 24601T specifies UPC-A+2 24602T specifies UPC-A+5 24610T specifies UPC-E 24611T specifies UPC-E+2 24612T specifies UPC-E+5
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 66
    value. Corresponds to the HP #p parameter. If an HRT Location of 5 (Above) is specified, the bar code engine automatically symbols Line Draw Manufacturing symbols MICR OCR-A Type Scalable Scalable Bitmap option card On option card In printer In printer In printer On option card On option card
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 67
    send binary data (non printing characters) to a printer. The FREESCAPE emulation feature provides a way for these systems to redefine the escape character by substituting a user-selected alternative (alternate escape code or AEC). When the AEC is located at the beginning of a standard PCL5 emulation
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 68
    to that of the escape character (decimal 27, hex 1B). To deactivate FREESCAPE emulation, send the command: AEC**27J. To set an AEC from the printer control panel: 1 From the Forms Card menu, select Alt ESC Code. 2 Select On to enable the AEC. 3 From the Forms Card menu, select Alt ESC
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 69
    supported when a Forms and Bar Code Card is installed. These operators enable printing of bar code symbologies with user code symbol Returns the coordinates for the bounding box Returns the x and is detected, an error message is generated. For more information, see "PostScript error messages" on page
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 70
    • The currentpoint is located at the bottom right corner of the bounding box when printing is complete. This currentpoint positioning applies both with and without accompanying human-readable text
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 71
    This function paints the specified bar code symbol at the currentpoint and advances the currentpoint by the symbol's displacement (as returned by the barcodewidth operator). This is similar to the show operator. Example: (01234567890)
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 72
    does not apply to the /Int2of5 symbology. Because there is no text embedded, / PrintCheckChar is irrelevant. String dict barcodewidth wx wy This function returns on the operand stack the x and y displacement of the currentpoint that would be caused by a barcodeshow of the specified bar code symbol
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 73
    Arguments for one-dimensional bar codes Key Type Definition /Symbology name Required, see "Values for /Symbology key" on page 72 for valid values /Units Optional, default is 1/600 inch. Other valid values are 1/300, 1/1200, and 1/720 inch, which also applies to height and width units for any
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 74
    Key Type Definition /Special boolean Optional, UPC-A, default is false: • if false, prints checksum at bottom left of the bar code • if true, prints checksum at middle left of the bar code Code 3 of 9, default is false: • if false, does not print start/stop * characters with text • if true,
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 75
    /Height /EmbedText Characters encoded Symbol 2 length Checksum character Values for /Symbology key Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code Default Parameters 1 /Bars & /Spaces /Symbology Bar Code Symbology [num num num num] /
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 76
    /Int2of5 Interleaved 2 of 5 240 1 6 18 N even No /Int2of5Chk /ISBN /ISSN Interleaved 2 of 5 with 240 1 6 check digit International Standard 620 3 8 Book Number International Standard 620 3 8 Serial Number 18 N odd Yes 16 24 32 N5 104 Yes3 16 24 32 N5 104 Yes3 /Leitcode German Postal 2 of
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 77
    24 32 N 11 /USPS-fim USPS FIM - Face N Identification Marking /USPS-sack USPS sack label, 8-digit 2 420* 1 9 27 of 5 N8 /USPS-tray USPS tray label, 10-digit 420* 4 9 27 2 of 5 N 10 /USPS-zebra USPS Zebra code 225* 1* 1 For all bar code symbologies, default /FontName key = Courier
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 78
    Values for /EmbedText key Value /Default Default parameter 0 /NoText 1 /Embedded 2 /HalfEmbedded 3 /Under 4 /Above 5 Definition Use symbology dependent default parameter, see "Values for / Symbology key" on page 72. Do not print text. Print text embedded. Print text half embedded.
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 79
    /FontName /CG-Times-BoldItalic /OCR-B Example: /FontName /Courier Font attribute for HRT bold italic only one style How to use the symbology ID for ISBN and ISSN ISBN and ISSN bar codes are normally 10 digits in length (see the PCL5 section above for a complete description), but they have "
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 80
    ] 24 (dec) [integer] 130 (dec) [integer] 185 (dec) [integer] 11 (dec) [integer] Description Symbology identification Sets the bar width in 1/100 mm Sets the number of bars that print per inch Sets the tracker height in 1/100 mm Sets the ascender and descender offset in 1/100 mm; the total height
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 81
    integer] 127 (dec) [integer] 188 (dec) [integer] [150 150] [array of integers] Description Symbology identification Sets the bar width in 1/100 mm Sets the number of bars that print per inch Sets the tracker height in 1/100 mm Sets the ascender and descender offset in 1/ 100 mm; the total height
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 82
    integer] 127 (dec) [integer] 188 (dec) [integer] [150 150] [array of integers] Description Symbology identification Sets the bar width in 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar height in 1/100 mm Sets the upward and downward bar height in 1/100 mm Optional
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 83
    Key /QuietZone /Units Range [int int] Default value [150 150] [array of integers] Description Same as the other bar codes, in /Units (optional) 1/600 inch (optional) /BarHeight must be: • greater than or equal to 20 mm for module widths less than or equal to 0.45 mm (0.0177 inches) • greater
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 84
    Two-dimensional bar codes HIBC 39/128 Key /Symbology Type name /Units /Height name int /Bars [int] /Spaces [int] /EmbedText name Range Default value Description n/a n/a Required. /HIBC128PAS /HIBC128SLS /HIBC39PAS /HIBC39SLS /300ths /600ths /1200ths /600ths Optional. /Units is
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 85
    the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error will be returned. Min: [0 0] (dec) Max: [1200 1200] (dec) • [150 150] (dec) or • [96 96] (hex) Optional. Note: Values less than the minimum will use the default
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 86
    in the calculations below. Min: 307 (dec) 01 33 (hex) Max: Ther is no maximum value, but larger bar codes may use up too much memory. • 756 (dec) or • 02 F4 (hex) Optional. Note: Values that go beyond the defined range will be appropriately clipped and set to the minimum and
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 87
    the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error will be returned. Min: [0 0] (dec) Max: [1200 1200] (dec) • [150 150] (dec) or • [96 96] (hex) Optional. Note: Values less than the minimum will use the default
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 88
    or 1 for /Rows and /Columns determined by /AspectRatio Required if /Type = 0; manually sets number of symbol rows; valid values are 3 to 90; any values outside this range will cause a RANGECHECK error Required if /Type = 0; manually sets number of symbol columns; valid values are 1 to 30; any values
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 89
    will override /ErrorLevel. See "/ Error Percent" on page 86. Optional; not supported Optional; not supported false Optional; default is false (0-8).The error correction level selected will be the one that best matches the number generated by multiplying the specified percentage by the number of
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 90
    %height / width ratio is 1 / 2 %smallest element width in 600th units %smallest element width = 20/600ths %bar height = 40/600ths %number of error code words = 8 %because they are not specified, /Truncated defaults to %false (no ;truncation) and / QuietZone defaults to [150 150] Arguments
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 91
    of module element, in /Units; minimum value supported is 1 Arguments for MaxiCode bar code symbology error correction 05 = Full symbol with enhanced error correction 06 = Reader program with standard error correction An array of 2 numbers • The class of service must be 3 digits in length, padded
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 92
    moved to the secondary message. Neither a group separator nor a comma should terminate this message. An optional secondary message follows the class of service for modes 2 and 3. For modes 4, 5, and 6, the message follows the number-of-labels field. Arguments for MaxiCode bar code symbology 89
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 93
    MicroPDF 417 Key /Symbology Type name /Units name /ModuleWidth int /ModuleHeight int /Rows int /Columns int Range n/a /300ths /600ths /1200ths 240-12000 (dec) 48060000 (dec) Note: The range of Y dimension is dependent on the value of X dimension, such that, Min = 2 * Xdimension Max = 5 *
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 94
    the value is of type name, the value will be set to default (/Courier-Bold) • If the value is of any other type, a TYPECHECK error will be returned. Min: [0 0] (dec) Max: [1200 1200] (dec) • [150 150] (dec) or • [96 96] (hex) Optional. Note: Values less than the minimum will use the default
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 95
    , the sequence uses the "pipe" character "|" to extend the sequence. For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data begins with "12345678901" • Followed by a "|" pipe character • Followed by the Composite data string
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 96
    Dependent on the default HRT Location of Linear Component, except other type, a TYPECHECK error will be returned. The data in a Lexmark) > barcodeshow • UPC-A data begins with "12345678901" • Followed by a "|" pipe character • Followed by the Composite data string: "Lexmark
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 97
    following information is a supplement to the instructions provided in the Forms and Bar Code Card User's Guide. 1 Enhanced page delimiters The Forms Card on MFPs that support e-mail and/or fax. 3 Select ports that the Forms Card listens to Users can now select which of the printer input ports that
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 98
    5 RFID Support Through LFJT (Lexmark Forms Job Ticket) support, the Forms Card now allows users to specify RFID printer options when printing a merged e-form. LFJT is a simple XML format for specifying those options. The LFJT is embedded into the merged PDF by the Forms Card firmware. The PDF is
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 99
    to the Forms Menu information provided in the Forms and Bar Code Card User's Guide. If a data filter is enabled, the incoming forms job is run through , except uses the '@' as the "format instruction" prefix Forms Card font support Not all fonts are recognized by the Forms and Bar Code Card.
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 100
    Card Fonts" on page 128 identifies all supported/recognized fonts and the font file used by the Forms and Bar Code card. Bubble font This font is typically used for standardized testing forms that are optically read for grading purposes. It is available in Lexmark Forms Composer when the font "OCRB
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 101
    Bubble font 98
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 102
    richer than that of the printer, a user could easily create a form where not all characters will print. This Technical Reference cannot define what is standard and non-standard, as those definitions change for each geographic location. The user stipulates a supported code page via the Forms Composer
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 103
    files on printer directory The Forms and Bar Code Card places forms files on the printer in the "formsmerge" directory. These files will be visible if the user performs a Print Directory from the printer menu. These files must not be tampered with in any way. Forms files on printer directory 100
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 104
    supported on various Lexmark products: Forms and Bar Code Card Forms Card Filters PCL5 Filter Y Optra FormsTM Init String Y • Supports file names Y1 Y Y 1 Supported when the printer control panel is set to a DBCS language. 2 Limited UTF-8 and UTF-16 support (no Asian fonts or file names
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 105
    in Y Y Y NA Data PDF Version 1.3-1.6 1.3-1.6 1.6 NA Floating Subforms Y Y Y NA Error Page Control Printer Operator NA NA NA Panel Sel Printer name) Y Y NA NA • PRINTNUM (Printer Serial Y number) Y NA NA Save Variable for reuse Y Y Y NA 1 Supported when the printer
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 106
    NA NA NA Combined Forms & Bar Code Y CD NA NA NA Updated Visual Bar Code Y Designer v3.0 NA NA NA Alternate Escape Code Y Y • PLANET Y Y Y 1 Supported when the printer control panel is set to a DBCS language. 2 Limited UTF-8 and UTF-16 support (no Asian fonts or file names, etc
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 107
    using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 108
    Bar Code Card v3.1 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Codablock F Y3 Y Y Y Sample the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 109
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Code except that it allows the full 128 character ASCII character set printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 110
    Bar Code Card v3.1 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Code 128 Sample Image Y Y Y in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 111
    and Bar Code Card v3.1 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name HIBC128, HIBC 39 Y3 Y Y Y Sample printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 112
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Interleaved bar). For general-purpose, free-form numeric data, this is printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 113
    LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Matrix 2 of It can accept a variable number of digits up to 13. printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 114
    Lexmark Optra FormsTM Bar Code Name Data Matrix Y3 Y Y Y Sample Image Comments The Data Matrix symbology employs Reed-Solomon error the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 115
    v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name , together with a fixed level of error correction for each symbol size. PDF417 printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 116
    and Bar Code Card v3.1 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name QR Y Y Y Y Sample Image the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 117
    v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name supplementary data, such as a batch number or expiration date). The linear component printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 118
    and Bar Code Card v3.1 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Composite + EAN Y3 Y Y Y Sample the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 119
    and Bar Code Card v3.1 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Composite + RSS-14 Y3 Y Y Y the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 120
    Producer Lexmark Optra error detection. Only 8-digit numeric data can be used with this code. EAN-8 supports a supplemental two- or five-digit number printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 121
    Producer Lexmark Optra FormsTM supports a supplemental two- or five-digit number to be appended to the main bar code symbol. EAN/JAN-13 + Y Y Y Y Y2 5-digit supplemental 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 122
    LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Sample Image FNC1 is used as part of the start code in number of the serial publication. 1 PDF417 and MaxiCode can be printed using Optra FormsTM only when the Bar Code Option is also installed in the printer
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 123
    Document Producer Lexmark Optra FormsTM Bar identify Global Trade Item Numbers (GTIN) in the Stacked Omnidirectional allows the full height RSS-14 to printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 124
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name UPC-A supplemental two- or five-digit number to be appended to the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 125
    Document Producer Lexmark Optra number system) digit, trailing zeros in the manufacturer's code, and leading zeros in the product identification part printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 126
    Card v3.1 LDSS Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Postal Bar Code Symbologies Australia in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 127
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Sample a customer identifier, a parcel number, and a check digit. printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 128
    Forms Composer v3.3.9 LDSS Document Producer Lexmark Optra FormsTM Bar Code Name Sample Image number, followed optionally by any block and house number printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 129
    Lexmark number, and an 8-digit item number. USPS FIM (Face Identification Marking) Y Y Y Y Y FIM is used by the United States Postal Service printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 130
    using Optra FormsTM only when the Bar Code Option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra FormsTM . 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra FormsTM
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 131
    C Forms Card Fonts Single-Byte Forms Card Fonts The column on the left indicates common font names. The column on the right indicates the actual font file resident on the Forms card. Font name AdobeSansMM AdobeSerifMM Albertus Extra Bold (W1) Albertus Medium (W1) Albertus MT Albertus MT Lt
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 132
    Font name AntiqueOliveCE-Roman AntiqueOlive-Compact AntiqueOlive-Italic AntiqueOlive-Roman Apple Chancery Apple-Chancery Apple-ChanceryCE Architext CMC7 Arial Arial Black Arial Bold Arial Bold Italic Arial Italic Arial-Bold Arial-BoldItalic Arial-BoldItalicMT Arial-BoldMT ArialCE ArialCE-Bold
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 133
    Font name AvantGardeCE-DemiOblique AvantGarde-Demi AvantGarde-DemiOblique Bodoni Bodoni Poster Bodoni PosterCompressed Bodoni-Bold Bodoni-BoldItalic BodoniCE BodoniCE-Bold BodoniCE-BoldItalic BodoniCE-Italic BodoniCE-Poster BodoniCE-PosterCompressed Bodoni-Italic Bodoni-Poster Bodoni-
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 134
    Font name CenturySchlbk Roman CenturySchlbk-Bold CenturySchlbk-BoldItalic CenturySchlbk-Italic CenturySchlbk-Roman CG Omega (W1) CG Times (W1) CG Times (W1) Bold CG Times (W1) Bold Italic CG Times (W1) Italic CG Times (WE) CG Times (WE) Bold CG Times (WE) Bold Italic CG Times (WE) Italic CG Times (
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 135
    Font name CGOmega-BoldItalic CG-Omega-BoldItalic CGOmega-Italic CG-Omega-Italic CGTimes CG-Times CGTimes-Bold CG-Times-Bold CGTimes-BoldItalic CG-Times-BoldItalic CGTimes-Italic CG-Times-Italic Chicago ChicagoCE Clarendon Clarendon Condensed (W1) Clarendon Light Clarendon-Bold ClarendonCE
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 136
    Font name Coronet-Regular Courier Courier New Courier New Bold Courier New Bold Italic Courier New Italic Courier-Bold Courier-BoldItalicTT Courier-BoldOblique Courier-BoldTT CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique CourierHP CourierHP-Bold CourierHP-BoldItalic CourierHP-
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 137
    Font name Garamond (W1) Kursiv Garamond (W1) Kursiv Halbfett Garamond-Antiqua Garamond-Halbfett Garamond-Kursiv Garamond-KursivHalbfett Geneva GenevaCE GillSans GillSans Condensed GillSans ExtraBold GillSans Light GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSansCE-Bold GillSansCE-
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 138
    Font name Goudy-BoldItalic Goudy-ExtraBold Goudy-Italic Helvetica Helvetica Bold Helvetica Bold Italic Helvetica Condensed Helvetica Italic Helvetica-Black Helvetica-Black Bold Helvetica-Black Bold Italic Helvetica-BlackOblique Helvetica-Bold Helvetica-BoldItalic Helvetica-BoldOblique HelveticaCE
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 139
    Font name Helvetica-Condensed-Oblique Helvetica-Italic Helvetica-Light Helvetica-Light Italic Helvetica-LightOblique Helvetica-Narrow Helvetica-Narrow Bold Helvetica-Narrow Bold Italic Helvetica-Narrow Italic Helvetica-Narrow-Bold Helvetica-Narrow-BoldItalic Helvetica-Narrow-BoldOblique Helvetica-
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 140
    Font name Intl-Courier-Oblique Intl-Univers-Bold Intl-Univers-BoldItalic Intl-Univers-Condensed-Bold Intl-Univers-Condensed-BoldItalic Intl-Univers-Condensed-Medium Intl-Univers-Condensed-MediumItalic Intl-Univers-Medium Intl-Univers-MediumItalic JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMTCE
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 141
    Font name LubalinGraphCE-BookOblique LubalinGraphCE-Demi LubalinGraphCE-DemiOblique LubalinGraph-Demi LubalinGraph-DemiOblique ManufIcons Marigold Marigold (W1) MICR Mona Lisa Recut Monaco MonacoCE MonaLisa-Recut New York NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbkCE-Bold
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 142
    Font name Optima-Italic Oxford Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Palatino-Bold Palatino-BoldItalic PalatinoCE-Bold PalatinoCE-BoldItalic PalatinoCE-Italic PalatinoCE-Roman Palatino-Italic Palatino-Roman RomanPillar RomanPillar Bold RomanPillar BoldItalic RomanPillar
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 143
    Font name Tekton Times New Roman Times New Roman Bold Times New Roman Bold Italic Times New Roman Italic Times-Bold Times-BoldItalic TimesCE-Bold TimesCE-BoldItalic TimesCE-Italic TimesCE-Roman Times-Italic TimesNewRoman TimesNewRoman-Bold TimesNewRoman-BoldItalic TimesNewRoman-BoldItalicTT
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 144
    Font name Univers (WE) Univers (WE) Bold Univers (WE) Bold Italic Univers (WE) Medium Italic Univers (WG) Univers (WG) Bold Univers (WG) Bold Italic Univers (WG) Medium Italic Univers (WL) Univers (WL) Bold Univers (WL) Bold Italic Univers (WL) Medium Italic Univers (WR) Univers (WR) Bold Univers (
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 145
    Font name UniversCE-Condensed UniversCE-CondensedBold UniversCE-CondensedBoldOblique UniversCE-CondensedOblique UniversCE-Extended UniversCE-ExtendedObl UniversCE-Light UniversCE-LightOblique UniversCE-Medium UniversCE-Oblique Univers-Condensed Univers-CondensedBold Univers-Condensed-Bold Univers-
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 146
    Double-Byte Forms Card Fonts One DBCS Language is supported: Simplified Chinese. The column on the left indicates common font names. The column on the right indicates the actual font file resident on the Forms
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 147
    memory to printer. Missing or corrupt file download formsets again. Missing or corrupt file download formsets again. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Download formset again. Add memory to printer. User or internal error Forms Print Errors
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 148
    Add memory to printer. Add memory to printer. Contact Lexmark Service. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. User or internal error
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 149
    to open file %s Unable to open LFF file %s Error Type Solution Insufficient memory Add memory to printer. Insufficient memory Add memory to printer. Internal Error Contact Lexmark Service. Internal Error Contact Lexmark Service. PJC File Missing or corrupt file download formsets again
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 150
    . XML file missing required attribute: %s XML file missing required element: %s Error Type LFM File Insufficient memory XML Error XML Error Solution Missing or corrupt file download formsets again. Add memory to printer. Possible corrupt file download formsets again. Possible corrupt file download
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 151
    format: !Err: nn Printed Error Example: !ERR: 12 Invalid Character PostScript error messages To assist with troubleshooting, the Forms and Bar Code Card generates error messages when an invalid bar code condition occurs. PostScript error reporting must be enabled on the printer for these messages to
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 152
    ID Fonts not loaded Not enough memory String errors String errors result from bad input data and represent the most commonly encountered errors. The following table shows the string errors possible for each symbology. String Errors Invalid String Character Empty String String String Length too
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 153
    String Character Empty String String String Length too Long too Short Invalid String Length not Odd String Length not Even Error Code 12 13 Post X X X MaxiCode X MicroPDF417 X MSI Plessey X X X OMR X X PDF-417 X PLANET X X QR Code X X X RSS14 X X X Singapore Post
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 154
    module size 45 HIBC Invalid Where flag 46 HIBC Invalid What flag 47 HIBC Invalid Date/Time 48 HIBC Invalid Format 49 HIBC Product/Catalog number too long Note: Bar Code errors shown in red are only thrown by the Forms Card, and not by PCL5 nor PostScript. Common
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 155
    Code Symbology Error Description 50 HIBC Unit measure digit only 51 HIBC Invalid lot number 52 HIBC Special link char missing 53 HIBC Invalid 2-digit quantity 54 HIBC Invalid 2-digit quantity 56 MaxiCode Invalid encoding string 57 MaxiCode Encoding string
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 156
    Pro version 3.3A1 (referred to as "HP BDP"), or the Lexmark Bar Code Card version 2.5. (referred to as "LXK BCC"). Note support lowercase "a-z" character input, and does not translate to uppercase, and is operating per the specs at the URLs noted above. Therefore, the Forms and Bar Code Card firmware
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 157
    memory for a requested bar code on a per-symbology basis. It does not "malloc" memory . There is no warning or error associated with excessive data guide, not an absolute definition of capability, and could change upward or downward depending on these assumptions: • the amount of RAM in the printer
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 158
    amount of encoded data should be reduced, or the user should change to a more capable bar code symbology. same as HP BDP or the LXK BCC. The number of bars and spaces are the same, the proper of certain 4-state bar code image sizes with previous Lexmark bar code options is not assured. However, the
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 159
    refer to the AIM MaxiCode specification, which can be found at: • http://lemming.sa.ap.lexmark.com/~tbarnett/files/AIM_Maxicode_05081997.pdf On page 13, section 4.8 "Modes" defines the maximum number of characters (codewords) that can be encoded. • Section 4.8.4 says that a Mode 4 symbol will hold
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 160
    here: • http://lemming.sa.ap.lexmark.com/~tbarnett/files/AIM_PDF417_spec.pdf In section 1 on pg. 1, , this procedure will prevent the BCE from throwing errors on pages with excess data, while encoding as much the AIM specification, but users should never exceed these values. If users were to change to
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 161
    Technical Reference manual ver 2.4b, and the HP BarDIMM Technical Reference manual from 3.0 decode such a combined bar code series. The SuchyMIPS BCE does support Structured Appends, and so does Mode number 2 or 3, plus a separator) are included in the input data, the BCE will throw an error. Users
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 162
    2C, decimal 44 Any other separator characters should produce an error on the page. 3 MaxiCode Separator Change (add a had to start with a label-number field and number-of-labels field. Both fields were Card should print a valid MaxiCode symbol that is empty (no data). Depending on the scanner used,
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 163
    deviation concerns firmware-imposed limits users attempt to encode a Codabar bar code with non-numeric characters, then the !Err: 12 Invalid Character error Short error message is generated. Postcript barcodepath Operator The Postscript operator barcodepath does not work as on previous Lexmark Bar
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 164
    Forms Manager will result in one of two scenarios: • If the printer's Print PS Error setting is turned on, then an error page will print and the job will be flushed. The printer will then return to Ready state. • If the printer's Print PS Error setting is turned off, then the job will be flushed and
  • Lexmark E460 | Forms and Bar Code Technical Reference - Page 165
    www.lexmark.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
www.lexmark.com
March 2009
Forms and Bar Code Card
Technical Reference Manual