Lexmark E460 IPDS Emulation User's Guide - Page 30
PAPER HANDLING Menu – Option Descriptions, 3.4.1 Offset Stacking, 3.4.2 UNIVERSAL SIZE - e460dn printer
View all Lexmark E460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3.4 PAPER HANDLING Menu - Option Descriptions In the following an asterisk "*" indicates the default factory value. Values only display when they are available on your printer. The selected value for each of these options can be printed; see Printing the Menu Settings Page (printers) on page 14 or Printing the Menu Settings Page (MFPs) on page 17. 3.4.1 Offset Stacking This option controls the offset stacking function. It is only displayed when offset stacking is supported in the printer standard bin or when an optional bin with offset stacking capability is installed. Offset stacking is only available in selected bins and may be limited to selected media. Bin selection has a higher priority than offset stacking commands in the IPDS job. The job must be routed to a bin that supports offset stacking and have offset stacking specified in the job before offset stacking will be performed. See section 5.1 on page 50 for additional information on offset stacking. Host Controlled* Offset stacking is controlled by the commands received in the IPDS job. Disabled Offset stacking is not performed. Offset stacking commands received in the IPDS jobs are ignored. 3.4.2 UNIVERSAL SIZE The IPDS emulation uses the paper size setting specified in the printer menu to determine the size loaded. The paper size is returned to the host. A printer paper size of "Universal" is displayed in the printer menu when a non-standard size paper is detected in an auto size sensing tray or is selected as the paper size loaded into a non-size sensing tray or feeder. This option allows you to specify the physical paper size returned to the host when a non-standard paper size is loaded. The paper size is specified in 300 dots per inch. Important: A 34 Incorrect Media, or paper jam message may be displayed if printing occurs past the length of the physical paper. You should specify the actual paper size to avoid errors. Product Lexmark C734 Lexmark C736 Lexmark X734de Lexmark X736de Lexmark X738de Lexmark E460dn, E460dw Lexmark E462dtn Lexmark T650 Lexmark T652 Lexmark T654 Lexmark T656dne Lexmark X463de Lexmark X464de Lexmark X466dte, X466dtwe Lexmark X651de Lexmark X652de Lexmark X654de Lexmark X656de Lexmark X658de Menu Option UNIVERSAL SIZE > Paper Length UNIVERSAL SIZE > Paper Width UNIVERSAL SIZE > Paper Length UNIVERSAL SIZE > Paper Width Value Range 4200*, 900 to 6824 2550*, 900 to 2550 4200*, 900 to 4251 2550*, 900 to 2550 Function Specifies Universal paper size dimensions. See notes below. 30