Lexmark E460 IPDS Printer and Host Setup Guide
Lexmark E460 Manual
 |
View all Lexmark E460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark E460 manual content summary:
- Lexmark E460 | IPDS Printer and Host Setup Guide - Page 1
Lexmark Card for IPDS and SCS/TNe IPDS Printer and Host Setup Guide - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 2
IPDS Printer and Host Setup Guide Notices NOTICES Edition Notice Fourth Edition. July 2009, Rev 004. Disclaimers The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC. AND KODAK PROVIDE THIS PUBLICATION "AS IS" WITHOUT - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 3
Printer and Host Setup Guide - Table of Contents TABLE OF CONTENTS Notices ...2 Table of Contents...3 Equipment Requirements and Specifications 4 Customer Support...5 1. AS/400 and iSeries LAN Printing Using the Printer Printer and Host Timeout Values ...34 6. Printer Messages and Problems ...36 3 - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 4
this guide applies to the following printers and Multifunction Products (MFPs). • Lexmark C734, C736 • Lexmark E460dn, E460dw, E462dtn • Lexmark T650, T652 • Lexmark T654 • Lexmark T656dne • Lexmark W850 • Lexmark X463de, X464de • Lexmark X466dte, X466dtwe • Lexmark X651de, X652de • Lexmark X654de - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 5
IPDS Printer and Host Setup Guide Equipment Requirements And Specifications Customer Support If you cannot find answers in this guide about using the IPDS emulation, or require firmware updates, please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 6
for setting up the AS/400, or iSeries, and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 7
TCP/IP retry count........... RETRY 15 Delay time between APPC retries....... RETRYDLY 90 Acknowledgement frequency ACKFRQ 100 Printer response timer PRTRSPTMR *NOMAX Generate PDF output PDFGEN *NONE Text 'description TEXT > 'IPDS Printer' (Note: 'IPDS Printer' is user defined text - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 8
be captured to the printer. Refer to the IPDS Emulation User's Guide for additional information on capturing fonts. Step 3 Create a Printer Device Description Note: SEPDRAWER *FILE Separator program SEPPGM *NONE Library Number of drawers NBRDRAWER Printer error message PRTERRMSG *INQ - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 9
USRDTATFM *NONE Library User defined driver program........... USRDRVPGM *NONE Library System driver program SYSDRVPGM Secure connection SECURECNN *NO Validation list VLDL *NONE Library Publishing information PUBLISHINF Support duplex *UNKNOWN Support color *UNKNOWN - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 10
IPDS Printer and Host Setup Guide AS/400 and iSeries LAN Printing Using the Printer Standard Network Port or buttons or icons to scroll to Network/Ports. 3 Select Network/Ports. TIp: To do this on printers, press the Select button ; on MFPs just touch Network/Ports. 4 Now you will see a list - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 11
DNS Server Address 157.184.115.7 (Address of your DNS Server) 8 Save/submit any changes and return to the Ready screen. 9 To verify the new print server settings, print a Network Setup If you experience printing problems, set Host Resolution to "300". 3 If you are replacing a printer that used a - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 12
controlled by the Release Timer on the host or by the IPDS Timeout on the printer. 6 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If the IPDS job does not print, try the following. 1 If Busy or IPDS - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 13
/Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 7 Refer to Chapter 6. Printer Messages and Problems on page 36 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 13 - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 14
to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option settings. Software requirements for MVS are: • PSF/MVS - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 15
for receiving IPDS jobs. This port is only used for receiving IPDS jobs. • Port 9600 - This port is only provided for compatibility with some older printers. NOTE: Some previous printers supported port 9100 for IPDS printing. If you are replacing a printer using port 9100, change to port 5001. 15 - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 16
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server Step 2 Define the printer to JES a) Example for JES2 FSS(FSS1) PRT7 PROC=PSFPROC,HASPFSSM=HASPFSSM FSS=FSS1,MODE=FSS, PRMODE=(LINE,PAGE,SOSI1,SOSI2), CLASS=C,UCS=0,SEP,NOSEPDS, - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 17
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or * */ // FONT01 DD DSN=SYS1.FONTLIB,DISP=SHR /* SYSTEM FONTS */ // DD DSN=INST.FONTLIB,DISP=SHR/* USER FONTS */ // * // PSEG02 DD DSN=INST.PSEGLIB,DISP=SHR /* PAGE SEGMENTS */ // * // OLAY01 DD - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 18
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 1 From a Ready state press the MENU button (printers) or touch (Menus on MFPs). 2 Use the 157.184.100.20 (Address of your WINS Server) DNS Server Address 157.184.115.7 (Address of your - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 19
to the IPDS Emulation User's Guide for information on these options and other IPDS MENU settings to format IPDS jobs. Note 1: On MFPs, "Copy Interrupt" is supported: an IPDS job can be interrupted by copy jobs and will resume printing automatically. Note 2: The supported printers and MFPs do not - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 20
the printer. 4 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting If PROC, set DATACK = BLKCHAR. This will block any invalid character errors. 6 If the job prints, but some characters are printed incorrectly, - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 21
IPDS Printer and Host Setup Guide PSF/MVS LAN Printing Using the Standard Network Port or Internal Print Server 9 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 21 - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 22
through the steps for setting up PSF/2 and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or a MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 23
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server b) On the PSF/2 Control Panel select Profile and then New. The PSF/2 New Device menu appears. - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 24
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server An OS/2 printer queue is now created and the printer is ready to print IPDS from OS/2 and a PSF/2 connected host. Note: You can check the connection using the PSF/2 Print Submitter. A number of AFP print files - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 25
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server b) On the PSF/2 Control Panel select Profile and then Change. c) Now select Tuning Options. The Job Interval Shutdown Timer indicates the number of seconds PSF/2 waits before shutting down when there are no jobs - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 26
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server Step 4 Configure the Printer's Print Server TCP/IP Settings To enable IPDS printing with a Standard Network port or a MarkNet internal LAN print server, several settings must be verified. You - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 27
IPDS Printer and Host Setup Guide PSF/2 LAN Printing Using an Internal LAN Print Server TCP/IP Settings Parameter Value WINS Server Address 157.184.100.20 (Address of your WINS Server) DNS Server Address 157.184.115.7 (Address of your DNS Server) 8 Save/submit any changes and return to the - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 28
the printer. 4 You may want to refer to the IPDS Emulation User's Guide to determine if other IPDS MENU settings need to be changed. Step 7 Troubleshooting Printer Messages and Problems on page 36 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 29
through the steps for setting up PSF/AIX and the printer to print IPDS jobs over a LAN. The printer must be configured with a Standard Network port or MarkNet internal LAN print server. Refer to the IPDS User's Guide for detailed instructions on using the control panel to select and change option - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 30
IPDS Printer and Host Setup Guide PSF/AIX LAN Printing Using an Internal LAN Print Server PORT Number: 5001 (Port number selected in Step 1.) Number of QUEUE DEVICES: Leave this at the default value (4 devices) initially. You can tune this option later, according to the throughput of the printer. - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 31
Address 157.184.100.20 (Address of your WINS Server) DNS Server Address 157.184.115.7 (Address of your DNS Server) 8 Save/submit any changes and return to the Ready screen. 9 To verify the new print server settings, print a Network Setup Page. Using the control panel MENU/Menus, select Reports - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 32
IPDS Printer and Host Setup Guide PSF/AIX LAN Printing Using an Internal LAN Print Server b) The recommended Host Resolution setting is "Auto". If you experience printing problems, set Host Resolution to "300". 3 If you are replacing a printer that used a 43xx Emulation setting, choose the "Resident - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 33
/Menus, select Option Card Menu > IPDS MENU > EMULATION > BARCODE > Bar Code Size. 7 Refer to Chapter 6. Printer Messages and Problems on page 36 for additional problem solutions. 8 Once the job prints, refer to the IPDS Emulation User's Guide for information on changing other IPDS MENU settings. 33 - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 34
and Host Setup Guide Printer and Host Timeout Values 5. Printer and Host Timeout Values Selecting compatible values of the printer IPDS Timeout value and host release timers is very important when printing IPDS jobs. Selection of some values will cause communication problems between the printer and - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 35
Printer and Host Setup Guide Printer and Host Timeout Values MVS host and Printer IPDS Timeout Values Printer IPDS Timeout Host Controlled Host Controlled 15 sec to 10 Min 15 sec to 10 Min STARTUP PROC STARTUP PROC Note Disconnect Interval (DISCINTV) Valid Port Number (PORTNO) Specific Number - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 36
below if you are searching for information on a printer message or for keywords for a problem. Message (bold) or Problem Problem Number 34 Incorrect Media 8 1565 EMUL ERROR 7 900.40 Firmware error 13 Bad Memory System 6 Busy 1 Disk Full 11 Disk protected, Fonts Not Erased 10 Fatal - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 37
IPDS Printer and Host Setup Guide Printer Messages and Problems Problem 1: Fatal error in print queue; incorrect Busy / Timeout The print queue stops with a fatal error which requires operator intervention or the printer displays Busy or IPDS even when no IPDS jobs are printing. Solution to Problem - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 38
being used. For information on the minimum recommended installed memory for various printing requirements on each supported printer, refer to the appendix on memory requirements and recommendations in the IPDS Emulation User's Guide. Problem 3: Large or complex PostScript or PCL jobs do not - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 39
with the printer code. Download the correct IPDS emulation version. See the section on support (page 5) for firmware update information. Problem 8: 34 Incorrect Media 34 Incorrect Media appears on the display Solution to Problem 8 A. Load the correct paper size and/or check tray paper guides to be - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 40
fonts and then restore the password protection. Problem 11: Disk Full or Flash Full The printer control panel displays a disk full or flash full message and the printer stops printing. Solution to Problem 11 The hard disk or user flash became full before all resources from the host were captured - Lexmark E460 | IPDS Printer and Host Setup Guide - Page 41
jobs is 5001. Problem 13: Message "900.40 Firmware error" displays when I power on the printer The printer control panel displays "900.40 Firmware error.. ..256MB required" when I power on the printer with the IPDS card installed. Solution to Problem 13 A minimum of 256 MB of user memory (DRAM) is
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
 |
 |
Lexmark
Card for IPDS and SCS/TNe
IPDS Printer and Host Setup Guide