Lexmark E460 Maintenance Guide
Lexmark E460 Manual
 |
View all Lexmark E460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark E460 manual content summary:
- Lexmark E460 | Maintenance Guide - Page 1
Lexmark E460dn, E460dw, and E462dtn Maintenance Guide January 2010 www.lexmark.com - Lexmark E460 | Maintenance Guide - Page 2
...4 Ordering toner cartridges ...4 Ordering a photoconductor kit ...5 Ordering a maintenance kit ...5 Replacing supplies...5 Replacing the toner cartridge ...5 Replacing the photoconductor kit ...7 Moving the printer...10 Moving the printer to another location...10 Shipping the printer ...10 - Lexmark E460 | Maintenance Guide - Page 3
all cables to the printer before proceeding. 2 Remove all paper from the printer. 3 Dampen a clean, lint‑free cloth with water. Warning-Potential Damage: Do Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in the TCP/IP section. 2 Click - Lexmark E460 | Maintenance Guide - Page 4
toner cartridges and part numbers Part name For the US and Canada Toner cartridge High Yield Toner Cartridge Extra High Yield Toner Cartridge For Europe, the Middle East, and Africa Toner cartridge High Yield Toner Cartridge Extra High Yield Toner Cartridge Lexmark Return Program Cartridge - Lexmark E460 | Maintenance Guide - Page 5
Part name Extra High Yield Toner Cartridge Lexmark Return Program Cartridge E462U11L Regular cartridge E462U21G Ordering a photoconductor kit The printer issues a message to let you know the photoconductor kit is near its end of life. At this time, order a photoconductor kit. You can also see the - Lexmark E460 | Maintenance Guide - Page 6
Warning-Potential Damage: When replacing a toner cartridge, do not leave the photoconductor kit exposed to direct light for an extended period of time. Extended light exposure can cause print quality problems. 4 Rotate the cartridge in all directions to distribute the toner. Maintaining the printer - Lexmark E460 | Maintenance Guide - Page 7
toner cartridge in as far as it will go. The cartridge clicks into place when correctly installed. 6 Close the front door. Replacing the photoconductor kit The printer automatically notifies you before the photoconductor kit reaches a page maximum by showing 84 PC Kit life warning or 84 Replace PC - Lexmark E460 | Maintenance Guide - Page 8
, clean surface. 4 Press the button on the base of the photoconductor kit. Pull the toner cartridge up and out using the handle. 5 Unpack the new photoconductor kit. Warning-Potential Damage: Be careful not to touch the photoconductor drum. Doing so may affect the print quality of future print jobs - Lexmark E460 | Maintenance Guide - Page 9
the photoconductor kit, reset the photoconductor counter. To reset the photoconductor counter, open the front door, press and hold until Resetting PC Counter appears. The power light blinks, and the printer beeps. Warning-Potential Damage: Resetting the photoconductor counter without replacing the - Lexmark E460 | Maintenance Guide - Page 10
to lift it off the optional drawer. The printer and options can be safely moved to another location by following these precautions: • Any cart used to move the printer must have a surface able to support the full footprint of the printer. Any cart used to move the options must have a surface able
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Lexmark E460dn, E460dw, and
E462dtn
Maintenance Guide
January 2010
www.lexmark.com