Lexmark M3150 Print Defects Guide
Lexmark M3150 Manual
View all Lexmark M3150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark M3150 manual content summary:
- Lexmark M3150 | Print Defects Guide - Page 1
on the print job indicates which particular part is causing the defect. Note: The imaging unit is a customer replaceable unit. If the fuser needs replacement, then contact customer support at http://support.lexmark.com or your service representative. Replace fuser Replace the imaging unit 80 mm
Print Defects Guide
Identifying supplies or parts for replacement
Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best matches the defects
on the print job indicates which particular part is causing the defect.
Note:
The imaging unit is a customer replaceable unit. If the fuser needs replacement, then contact customer support at
or your service representative.
Replace fuser
Replace the imaging unit
80 mm
(3.15 in.)
97 mm
(3.82 in.)
47 mm
(1.85 in.)
38 mm
(1.5 in.)
Print Defects Guide
Page 1 of 1