Lexmark MS315 MS310, MS410, MS510, MS610 Series Disassembly of Waste Electrica

Doc No.:

Rev. 00

2

Page 1 of 13

Disassembly of Waste Electrical and Electronic Equipment (WEEE) Manual

EU Waste Electronic and Electrical Equipment Directive require producers to provide information of the different electronic

and electrical materials and components found in their products at its end-of-life, and disassembly references to treatment

and recycling facilities.

The disassembly

information for this product has been prepared for use by a recognized treatment or recycling facility

and

is not intended to be used by others.

1.

Product information

2.

Materials and components list for selective treatment

3.

Disassembly tools

4.

Disassembly references

The following information is intended only for the use of treatment and recycling facilities.

All disassembly instructions should be performed with the power switch in the OFF position. Disconnect the power cord

from the wall outlet and from the printer before continuing.

If there are any other devices attached to the printer, then turn

them off as well, and unplug any cables going into the printer.

1.

Product information

Model name(s)

—

Indicate all model name(s) within the product family

Model name

Lexmark MS310 series

–

Lexmark MS310d, Lexmark MS310dn

, Lexmark MS312dn, Lexmark MS315dn

Lexmark MS410 series

–

Lexmark MS410d, Lexmark MS410dn

, Lexmark MS415dn (Lexmark M1140, Lexmark M1140+)

Lexmark MS510 series

–

Lexmark MS510dn (Lexmark M1145)

Lexmark MS610 series

–

Lexmark MS610dn , Lexmark MS610dtn, Lexmark MS610de (Lexmark M3150), Lexmark MS610dte

* Add rows as needed

2.

Materials and components list for selective treatment

Items

Quantity

Notes

Polychlorinated biphenyls (PCB) containing capacitors

0

N/A

Mercury containing components, such as switches or

backlighting lamps

0

N/A

Batteries

1

Lithium Manganese Dioxide coin cell

located on the system controller card