Lexmark MS510 User's Guide - Page 129
Reports menu, Network Card menu, Network/Ports, Standard Network, Reports, Network [x]
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Understanding the printer menus 129 Use Standard Network Setup OR Network [x] Setup Reports Network Card TCP/IP IPv6 Wireless AppleTalk To Display and set the printer network settings. Note: The Wireless menu appears only when the printer is connected to a wireless network. Reports menu To access the menu, navigate to any of the following: • Network/Ports menu > Networks/Ports > Standard Network > Standard Network Setup > Reports • Network/Ports menu > Networks/Ports > Network [x] > Network [x] Setup > Reports Use To Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address. Network Card menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > Network Card • Network/Ports > Network [x] > Network [x] Setup > Network Card Use To View Card Status Connected Disconnected View the connection status of the network card. View Card Speed View the speed of an active network card. Network Address UAA LAA View the network addresses. Job Timeout 0-255 seconds Set the amount of time it takes for a network print job to be canceled. Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value of 1-9 is selected, then the setting is saved as 10.