Lexmark MS510 User's Guide - Page 131
IPv6 menu, Network/Ports, Standard Network, Network [x], Network [x] Setup - dn
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Understanding the printer menus 131 Use Enable DDNS Yes No Enable mDNS Yes No DNS Server Address Backup DNS Server Address Backup DNS Server Address 2 Backup DNS Server Address 3 Enable HTTPS Yes No To View or change the current DDNS setting. Note: Yes is the factory default setting. View or change the current mDNS setting. Note: Yes is the factory default setting. View or change the current DNS server address. View or change the backup DNS server addresses. View or change the current HTTPS setting. Note: Yes is the factory default setting. IPv6 menu To access the menu, navigate to any of the following: • Network/Ports > Standard Network > Standard Network Setup > IPv6 • Network/Ports > Network [x] > Network [x] Setup > IPv6 Note: This menu is available only in network printers or printers connected to print servers. Use To Enable IPv6 On Off Enable Internet Protocol Version Six (IPv6) in the printer. IPv6 uses bigger numbers to create IP addresses. Note: On is the factory default setting. Auto Configuration On Off Specify whether or not the network adapter accepts the automatic IPv6 address configuration entries provided by a router. Note: On is the factory default setting. Set Hostname* Set the host name. Note: The host name is limited to 15 characters, and accepts US‑ASCII, alphanumeric characters and hyphen only. View Address* View the current IPv6 addresses. View Router Address* View the current router address. Enable DHCPv6 On Off Enable DHCPv6 in the printer. Note: On is the factory default setting. * These settings can be changed only from the Embedded Web Server.