Lexmark MS510 User's Guide - Page 178

Clearing jams 178 Notes: • When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages. • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not guarantee that the page will print. 1 2 6 5 Area 1 Standard bin 2 Rear door 3 Tray 1 4 Tray [x] 5 Multipurpose feeder 6 Front door 3 4 Printer control panel message [x]‑page jam, clear standard bin. [20y.xx] [x]‑page jam, open rear door. [20y.xx] [x]‑page jam, remove tray 1 to clear duplex. [23y.xx] [x]‑page jam, remove tray [x]. [24y.xx] [x]‑page jam, clear manual feeder. [250.xx] [x]‑page jam, open front door. [20y.xx] What to do Remove the jammed paper. Open the rear door, and then remove the jammed paper. Pull tray 1 completely out, then push the front duplex flap down, and then remove the jammed paper. Note: You may need to open the rear door to clear some 23y.xx paper jams. Pull the indicated tray out, and then remove the jammed paper. Remove all paper from the multipurpose feeder, and then remove the jammed paper. Open the front door, then remove the toner cartridge, imaging unit, and jammed paper.