Lexmark MS510 User's Guide - Page 61
Adjusting Sleep mode, Using the Embedded Web Server, Notes, Settings, General Settings, Timeouts
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Using MS510dn and MS610dn 61 Use On Off 3 Press . To Reduce printer noise. Notes: • Print jobs will process at a reduced speed. • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed. Use factory default settings. Note: This setting supports the performance specifications of the printer. Adjusting Sleep mode To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes. Note: The printer still accepts print jobs when in Sleep mode. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Navigate to: Settings > General Settings > Timeouts 3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode. 4 Click Submit. Using the printer control panel 1 From the printer control panel, navigate to: > Settings > > Settings > > General Settings > > Timeouts > > Sleep Mode > 2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode. 3 Press .