Lexmark MS510 User's Guide - Page 62
Using Hibernate mode, Setting Hibernate Timeout, Notes, Using the Embedded Web Server, Settings
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Using MS510dn and MS610dn 62 Using Hibernate mode Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely. Notes: • Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of the Sleep button wakes the printer from Hibernate mode. • The Hibernate mode can be scheduled. For more information, see "Using Schedule Power Modes" on page 63. • If the printer is in Hibernate mode, the Embedded Web Server is disabled. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If your are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > General Settings > Sleep Button Settings. 3 From the "Press Sleep Button" or "Press and Hold Sleep Button" drop‑down menu, select Hibernate. 4 Click Submit. Using the printer control panel 1 From the printer control panel, navigate to: > Settings > > Settings > > General Settings > 2 Press the arrow buttons until Press Sleep Button or Press and Hold Sleep Button appears, and then press . 3 Press the arrow buttons until Hibernate appears, and then press . Notes: • When Press Sleep Button is set to Hibernate, a short press of the Sleep button sets the printer to Hibernate mode. • When Press and Hold Sleep Button is set to Hibernate, a long press of the Sleep button sets the printer to Hibernate mode. Setting Hibernate Timeout Hibernate Timeout lets you set the amount of time the printer waits after a print job is processed before it goes into a reduced power state. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field.