Lexmark MS610de Forms and Bar Code Card Technical Reference Guide
Lexmark MS610de Manual
View all Lexmark MS610de manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MS610de manual content summary:
- Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 1
Forms and Bar Code Card 3.3 Technical Reference Manual October 2012 www.lexmark.com - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 2
in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Optra Forms - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 3
its subsidiaries Microsoft Corporation All other trademarks are the property of their respective owners. © 2012 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 4
Compressed data formats 13 Checksum calculation 13 Visual Bar Code Designer 13 HP BarDIMM compatibility intercept 13 Supported Lexmark PCL 5 and PostScript bar codes 13 SAP support 17 Chapter 4: PCL 5 emulation: HP 18 One-dimensional bar codes 18 Defining characteristics 18 Command structure - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 5
code descriptor for PDF417 33 Bar code descriptor for QR 34 Bar code descriptor for MaxiCode data 34 Chapter 5: PCL 5 emulation: Lexmark 36 New PCL 5 commands to support bar codes 36 Bar code descriptor ESC&x#W[descriptor data 36 Transfer bar code data ESC&y#W[bar code data 36 Compatibility - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 6
Chapter 7: Forms Card 104 Features ...104 Adding fonts to existing printer objects 104 Loading forms to a flash drive 104 Data capture data 106 Disabling PJL LPORTROTATE 106 Disabling Merge Mode while downloading formsets 106 Enhanced page delimiters 106 Fax and e-mail merged output 106 Select - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 7
on printer directory 111 Chart support 111 Better handling of SAP RDI Variables 111 Limitations 111 Appendix A: Feature Summary 112 Appendix B: Supported bar 4-State postal widths 167 HRT widths and heights 167 PDF417 image widths and heights 168 MaxiCode capacity 168 Bar code horizontal - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 8
Uploading formsets when the OFIS data filter is disabled 172 French Postal 3 of 9 dimensions 173 Table of Contents 8 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 9
- 256 MB on-board user flash • Forms Card: - Adding fonts to existing printer objects - Loading Forms from a flash drive - Data capture to a flash drive - PIN for Formsets - Using page delimiters and lines per page simultaneously - Defining the page start line after the page delimiter - Reacting to - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 10
with SAPScript in SAP R/3 applications. A supported printer with the Forms and Bar Code Card includes support for: • RFID • Built-in 256MB • End User License Agreement • A Readme file that contains download information, requirements, and installation instructions Follow the instructions in the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 11
condition is detected, an error message appears. For more information, see "Bar code engine errors" on page 160. Notes: • Make sure the Forms Composer and Forms Manager applications are installed and running to create and manage forms. • For more information on using RFID when printing forms, see - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 12
installed, you can specify bar codes for printing in PCL 5 using the following techniques: 1 Standard PCL 5 font selection commands (used in the HP BarDIMM Pro products) 2 Special Lexmark in the table "PCL 5 emulation escape sequences" on page 20. The specified text can be automatically centered on - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 13
intercept The LexmarkTM Forms and Bar Code Card meets the function of the HP BarDIMM Pro version 3.3a option. Supported Lexmark PCL 5 and PostScript bar codes The following is a list of supported one-dimensional bar codes: • Australian Post 4-State bar code (37-CUST, 52-FF-MET, and 67-FF-MET - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 14
• EAN/JAN-8 • EAN/JAN-8 with 2-digit supplemental • EAN/JAN-8 with 5-digit supplemental • EAN/JAN-13 • EAN/JAN-13 with 2-digit supplemental • EAN/JAN-13 with 5-digit supplemental • EAN-128 • French Postal 3 of 9 A/R • German Postal 2 of 5 (Leitcode and Identicode) • HIBC 39/128 • Interleaved 2 of 5 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 15
• USPS Tray label, 10-digit 2 of 5 • USPS Sack label, 8-digit 2 of 5 • USPS • RSS-14 Expanded • RSS-14 Limited • RSS-14 Stacked • RSS-14 Truncated The following is a list of supported composite bar codes: • EAN-8 • EAN/JAN-8 with 2-digit supplemental • EAN/JAN-8 with 5-digit supplemental • EAN-13 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 16
OCR-A • OCR-B digits regular • UPC tall • UPC tall narrow • UPC tall thin • UPC half • UPC half narrow The following is a list of supported fonts that resides in the option card: A. Scalable • Architext CMC7 • CMC7 • Electrical Symbols • Euro and other currency symbols • Manufacturing symbols • MICR - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 17
of supported device types: • LEXT622 • LEXW820 • ZLXFORM2 Lexmark-unique PCL 5 command description Lexmark-unique PCL 5 definitions provide support for # symbol represents the number of bytes of bar code data. Compatibility safeguard These commands, if sent to an HP printer, are flushed and nothing - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 18
Code Card. One-dimensional bar codes With Forms and Bar Code Card installed, font selection commands in the incoming PCL 5 data stream are analyzed function parameter list" on page 22. If the typeface value is one of those given, then special bar code generation firmware will process the font - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 19
• To print additional bar code data with the same characteristics as the previous data, set a new cursor position and send only the bar code data. Resending the escape sequence portion of the command is not necessary. • When other characteristics are specified, you must chain (combine) them with the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 20
text embedded 3 = Print text half embedded 4 = Print text under bar code 5 = Print text above bar code Add the preceding values to the following numbers to produce the intended effect: 10 = 10 = 20 = 100 = Prints UPC-A checksum on the middle left of the bar code instead of the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 21
Command Esc(s#V or AEC)s#V Esc(s#1,#2,#3,#4B or AEC)s#1,#2,#3,#4B Esc(s#1,#2,#3,#4S or AEC)s#1,#2,#3,#4S Function/Parameters Selects the height of the bar in points (1/72 inch). Except in symbologies where #V is a fixed value, the bar height can be varied from a minimum of 3 points (0.04 inch, 1 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 22
PCL 5 function parameter list Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") Selects the bar code symbology Default parameters1 Characters encoded Symbol2 length Checksum character AEC)s#T Typeface # Bar code symbology #v #p #b1, #b2, #b3, #b4, - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 23
Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") (continued) b3, #b4, s1 s2 s3 s4 24643 German Postal 2 of 5 Identcode 72.0 124 10 30 - - N 11 24644 USPS tray label, 10-digit 2 of 50.4* 4 9 27 - - N 10 5 24645 USPS sack label, 8-digit 2 of 50.4* 1 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 24
Command Esc(s#T or Function/Parameters (#v units are in 1/72"; #b, s units are in 1/600") (continued) Selects the bar code symbology Default parameters1 Characters encoded Symbol2 length Checksum character AEC)s#T Typeface # Bar code symbology #v #p #b1, #b2, #b3, # - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 25
byte 7 of the Lexmark bar code descriptor for Australia 4-State Postal bar codes (see "PCL 5 emulation escape sequences" on page 20). Human-readable (in 1/100 mm units): Bar Pitch (in bars per inch): Tracker Height (in 1/100 mm units): Ascender, Descender Offset (in 1/100 mm units): Fixed at 47 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 26
Lexmark bar code descriptor for Singapore 4-State Postal bar codes, the following correspondences exist when using this technique: Bar Width (in 1/100 mm units code is a series of diagonal or vertical lines placed to the right of a USPS tray label bar code to visually identify trays containing bar - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 27
version for small item marking applications, and - a larger RSS Stacked Omnidirectional version which can be scanned omnidirectionally. Note: Forms and Bar Code Card does not support the RSS Stacked Omnidirectional bar code. One-dimensional bar codes 27 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 28
RSS-14 Stacked • 24814T specifies RSS-14 Limited • 24815T specifies RSS-14 Expanded Optional Selects the height of the bars in 1/72" (same units as fonts). Note: Values lesser than the minimum uses the corresponding default value for the specific RSS bar code type. Optional Selects the width of - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 29
is no maximum value but larger values produce a symbol that may not fit on the page. 0=Default 1=No HRT 2=Embedded 3=Half-Embedded 4=Under Default (if not specified) 8, Mail bar code Intelligent Mail bar code is used by the Postal Service to sort and track letters and flats. It combines data from - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 30
The HP BarDIMM version 5.0 supports the Intelligent Mail bar code. The version 5.0 BarDIMM command for Intelligent Mail has no PCL parameters. It is printed in one size. Field Name Esc (s#T - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 31
memory. Description Required 24840T Optional Selects bar height bar height to 1/72" (same units as fonts) Note: Values from 0 to 2 are the same as the (See "Deviations" chapter) Requested number of rows in the Codablock F symbol. Optional Requested number of columns in the Codablock F symbol - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 32
The requested number of rows (V2 parameter) must be specified when using the HP BarDIMM Pro and V3, with two rows: • Esc(s16,2,20v24840T HP documents the bar widths (B parameter) in their reference manual, but varying B1 or B2 does not affect the bar width of the symbol. When B1 is specified in the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 33
parameters to specify the desired number of rows and columns, parameter is not used to manually set rows and columns. Lexmark bar code descriptor for PDF417, the following correspondences exist when using this technique: ECC Level: Units Enumeration for X Dimension: X Dimension (in X Dimension units - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 34
B parameter 10 Esc(s#B S parameter 0 Esc(s#S 24860T Model 1 24861T Model 2 Optional Determines ECC level as follows: • 0 = Default Lexmark Transfer Bar Code Data command to print MaxiCode symbols, with the following change to rule 1: The input data must start with a label-number field, a number - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 35
In relation to the fields of the Lexmark bar code descriptor for MaxiCode, the following correspondences exist when using this technique: Mode: Specified in the data The Typeface (Esc (s#T) value for MaxiCode is 24800. Two-dimensional bar codes 35 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 36
Card. New PCL 5 commands to support bar codes Support of new bar code functionality requires new Lexmark-unique PCL 5 definitions that provide is flushed. The number of bytes of descriptor data is indicated by #. Compatibility safeguard These commands, if sent to an HP printer, are flushed and - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 37
the second bar width in bar dimension units (#b2 parameter) Specifies the second space width in bar dimension units (#s2 parameter) Specifies the third bar width in bar dimension units (#b3 parameter) Specifies the third space width in bar dimension units (#s3 parameter) PCL 5 emulation: Lexmark 37 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 38
Description Specifies the fourth bar width in bar dimension units (#b4 parameter) Specifies the fourth space width in bar dimension units (#s4 parameter) Lexmark symbology assignments This table describes both new and existing Lexmark symbology assignments: Bar code type 2-D bar code 2-D bar code - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 39
-dimensional bar codes Post 4-State bar code descriptors (Lexmark) Bar code descriptor for Australian Post 4-State bar codes 1/100 mm 3 Bar Pitch 22-25 (dec) 16-19 (hex) 24 (dec) 18 (hex) Sets the number of bars that print per inch 4 Tracker Height 100-160 (dec) 64-A0 (hex) 130 (dec) 82 ( - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 40
3 Bar Pitch 20-24 (dec) 14-18 (hex) 22 (dec) 16 (hex) Sets the number of bars that print per inch 4 Tracker Height 102-152 (dec) 66-98 (hex) 127 ( Reserved - - - Note: All seven code formats are supported. The format is implied on the type of data received. Embedded spaces and commas are - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 41
dec) 64 (hex) Sets overall bar code size This value called "a" is a unit-less value multiplying factor used below in other parameters. 3 Bar Width 0.5a-0.7a Post 4-State symbology Sets the bar width to 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar height to - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 42
that begins with a letter is assumed to be following this format. • Invalid characters or lengths in the post code, house/postbox/freepost number, house number extension, country code, or foreign postcode are flagged with an error. USPS Facing identification marking (FIM) Byte 0-1 2-15 Field name - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 43
17-18 19-20 21-22 23-24 25-31 Field name Symbology ID Text Location Text Typeface Text Style Bar Height Units Bar Height Bar/Space Width Units Bar Width #1 (Module Width) Space Width #1 Bar Width #2 Space Width #2 Bar Width #3 Space Width #3 Bar Width #4 Space Width #4 Reserved Range - This value - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 44
identification code, which is composed of the following: • A 2-digit post code • A 2-digit billing district code • A 6-digit customer account number • An 8-digit item number To enhance readability, "." characters (ASCII 46) may appear anywhere in the data; they are ignored. Three "." characters are - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 45
Range - 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-4 (dec) 00-04 (hex) 00-04 (hex) 6-7 Bar Height - 8 Bar/Space Width 00-04 (hex) Units 9-10 Bar Width #1 - 11-12 Space Width #1 - 13-14 Bar Width #2 - 15-16 Space Width #2 - 17-18 Bar Width #3 - 19-20 Space Width #3 - 21-22 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 46
tenth digit position) in the data produces an error message. Cursor positioning is handled the same as for other one-dimensional symbologies. If the Units bytes 5 or 8 are changed from their default values, then the Bar Height and Bar/Space Width parameters assume new dimensions, based on the new - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 47
Range - 0-5 (dec) 00-05 (hex) 0-5 (dec) 00-05 (hex) 0-4 (dec) 00-04 (hex) 00-04 (hex) 6-7 Bar Height - 8 Bar/Space Width 00-04 (hex) Units 9-10 Bar Width #1 - 11-12 Space Width #1 - 13-14 Bar Width #2 - 15-16 Space Width #2 - 17-18 Bar Width #3 - 19-20 Space Width #3 - 21-22 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 48
data for an ISSN symbol consists of an 8-digit ISSN, followed by a two-digit price code, optionally followed by a two- or five-digit add-on code. If a two is handled the same as for other one-dimensional symbologies. If the Units bytes 5 or 8 are changed from their default values, then the Bar - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 49
No HRT 2=Embedded 3=HalfEmbedded 4=Under 5=Above 0=Courier 1=SM Gothic 2=SM Unit 3=SM Unit Condensed 4=Roman 5=OCRB 0=Regular 1=Italic 2=Bold (default) 3=Bold Italic 0=Default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units Default value Description n/a Required • 112 (dec) or 00 70 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 50
-12 Space Width #1 (Code 128 space 1, or Code 39 Narrow) Type int int int int Range 150-600 (dec) 0=Default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units 5-27 (dec) 5-27 (dec) Default value Description 240 (dec) 00 F0 (hex) Optional Corresponds to HP #v parameter in the specified - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 51
) 1=No HRT 4=Under 5=Above int 0=Courier 1=SM Gothic 2=SM Unit 3=SM Unit Condensed 4=Roman 5=OCRB int 0=Regular 1=Italic 2=Bold 3=Bold Italic int 0=default (1/600" units) 1=1/300" units 2=1/600" units 3=1/1200" units [int int] Minimum: 307 (dec) 01 33 (hex) Maximum: There - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 52
13-14 Bar Width #2 (Wide) Type Range Default value Description int 0=default 0 or 2 (dec) Optional (1/600" units) 00 or 02 (hex) Specifies units for bar and space 1=1/300" widths units 2=1/600" units 3=1/1200" units [int int] 12-24 (dec) 00 0C-00 18 (hex) 12 (dec) 00 0C (hex) Optional - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 53
Byte Field name 15-16 Space Width #2 (Wide) 17-31 Reserved Type Range Default value Description [int int] 27-72 (dec) 00 1B-00 48 (hex) Note: The range of values for space Width 2 is dependent on the value of Space Width 1, where min = 2.25 x Space Width 1, max = 3 x Space Width 1 Note: The - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 54
Intelligent Mail Bytes 0-1 2 3 4 5 6 7-15 Field Name Symbology ID Type name Bar Width - Bar Pitch - Tracker Height - Ascender, - Descender Offset HRT Location Reserved - Range n/a 38-63 (dec) 26-3F (hex) 20-24 (dec) 14-18 (hex) 100-160 (dec) 64-A0 (hex) 100-210 (dec) 64-D2 (hex) - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 55
Lexmark) Bytes 0-1 2-3 4-5 MSB LSB Range Symbology Symbology n/a ID byte 1 ID byte 2 (00x) (03x) Default (if not specified) n/a Reserved X dimension byte 1 (in Units) Units X dimension byte 2 (in units) 0=Default 1=1/300" units 2=1/600" units 3=1/1200" units Sets the units used in - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 56
a value of 18.9, which is specified as 1890 (dec) or 07 62 (hex). The Units enumeration will be set to 02 or 00 (hex), and these two bytes will be 07 ( using 0. See Section 9.5.3 Row and Column Boundary Conditions. Manually set the number of symbol columns. Automatic operation specified by using 0. - - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 57
page 58. Units enumeration for X dimension: (Default = 02x) This byte sets the units used in specifying the X dimension (the smallest element width). Supported values are 01x for 300 dpi units, 02x for 600 dpi units, and 03x for 1200 dpi units can be used to manually set the number of symbol rows. - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 58
the symbol requires 80 codewords, the symbol will be built with 8 rows (80 codewords / 10 columns). Columns: (Default = 00x) This can be used to manually set the number of symbol columns. Using aspect ratio, both columns and rows must be 00x. Valid non-zero values are 01x to 1Ex (1 to 30 decimal - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 59
data sent with the Transfer Bar Code Data command must follow these rules: • For all modes, the input data must start with a label-number field and number-of-labels field. Both fields are one digit in length, and are terminated with either a comma or group separator (GS, ASCII 29). Two-dimensional - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 60
6 alphanumeric characters (any printable character in code set A as defined in AIM spec). Codes longer than 6 characters will be truncated. Codes shorter than 6 characters follows the class of service for modes 2 and 3. For modes 4, 5, and 6, the message follows the number-of-labels field. MaxiCode - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 61
modes. The support of NULL (hex 00) characters is not supported at this time, due to possible string termination issues within the printer. The basic . 0 or 2 (dec) 00 or 02 (hex) Optional Sets the units used in specifying any further parameters or dimensions. The default value is 1/ 600 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 62
value of 18.9, which is specified as 1890 (dec) or 07 62 (hex). The Units enumeration will be set to 02 or 00 (hex), and these two bytes will be 00 (hex) Optional Manually set the number of symbol rows. Automatic operation is specified by using 0. Manually set the number of symbol columns. Automatic - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 63
all scanning technologies, and so that 2D imagers can use the linear component as a area CCD scanners, and with linear and rastering laser scanners. The following bar codes allow the addition Reserved Regular UPC codes Reserved Reserved Note: The number system digit is usually printed to the left - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 64
that a bar code has been scanned correctly. Since a scan can produce incorrect data due to inconsistent scanning speed, print imperfections, or a host of other problems, it is useful to verify that the rest of the data in the bar code has been correctly interpreted. The check digit is calculated - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 65
encoded with odd and even parity from the left-hand columns of the EAN-13 character. The parity used for each character depends on the number system (0 or 1) and the check digit from the original UPC-A bar code. 3 EAN-8 (including +2 and +5 variants) EAN-8 is the EAN equivalent of UPC-E in the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 66
bars, or start sentinel, encoded as 101 b The second character of the number system code, encoded as described in the following table c The five characters of right hand side" of the symbol. The first character of the EAN-13 number system code (i.e., the first digit of the EAN-13 value) is encoded in - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 67
that data represents. It has a list of Application Identifiers (AI) to include additional data such as best before dates, batch numbers, quantities, weights and many other attributes the user needs. Each AI tells the system what kind of data will follow and in what format. UCC-128 has the benefit of - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 68
Composite bar code sequence: (s36b24810T01234567890123|Lexmark(s0p12h10vsb4099T • Beginning with a RSS-14 24810T sequence • Followed by RSS-14 data "01234567890123" • Followed by a "|" pipe character • Followed by the Composite data string: "Lexmark" • Followed by a complete 4099T sequence - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 69
PCL specifications for composite bar codes Field Name Type Range Default (if not specified) Definition Symbology ID int - - Required 24600T specifies UPC-A 24601T specifies UPC-A+2 24602T specifies UPC-A+5 24610T specifies UPC-E 24611T specifies UPC-E+2 24612T specifies UPC-E+5 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 70
default. HRT Typeface (of int the linear component) 0=Courier 1=SM Gothic 2=SM Unit 3=SM Unit Condensed 4=Roman 5=OCRB 0 (dec) or 00 (hex) Optional Corresponds to the In option card In option card In option card In printer In printer In printer In option card In option card In option card In option - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 71
card UPC Half Scalable In option card UPC Half Narrow Scalable In option card UPC Half Thin Scalable In option card USPS POSTNET Bitmap In printer Note: To obtain the PCL 5 ESC sequences used to select these fonts, print the PCL 5 font list from the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 72
data. Not all systems are able to send binary data (non-printing characters) to a printer. The FREESCAPE emulation feature provides a way for these systems to redefine the escape character by substituting a user-selected alternative (alternate escape code or AEC). When the AEC is located at the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 73
To set an AEC from the printer control panel: 1 From the Bar code menu, select Alt ESC Code. 2 Select On to enable the AEC. 3 From the Bar code menu, select ESC Character. 4 Select an AEC from the menu. You can disable the AEC by setting Alt ESC Code to Off. FREESCAPE emulation 73 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 74
supported when a Forms and Bar Code Card is installed. These operators enable printing of bar code symbologies with user an error message appears. For more information, see "Bar code engine errors" on page 160. Characteristic values, other than the default value, must be explicitly specified. If - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 75
This currentpoint positioning is applicable with or without accompanying human-readable text and also considers any specified quiet zones to be within the bounding box. Human-readable text Human-readable text can be specified with one-dimensional bar codes under the following provisions: • The - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 76
PostScript emulation operator Operator barcodeshow Function/parameters String dict barcodeshow This function paints the specified bar code symbol at the currentpoint and advances the currentpoint by the displacement of the symbol (as returned by the barcodewidth operator). This is similar to the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 77
Operator barcodebbox barcodewidth Function/parameters String dict barcodebbox llx lly urx ury This function returns the coordinates for the bounding box that encloses the specified bar code symbol if it is shown by a barcodeshow. This is similar to the pathbbox operator. Example: (123456) - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 78
; the default value is based on the symbology, see "Values for /Symbology key" on page 80. /Spaces [num num num num] Optional In /Units; the default value is based on the symbology, see "Values for /Symbology key" on page 80. /EmbedText name or [name name] Optional The default is based on the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 79
Key Type Definition /Special boolean Optional For UPC-A, the default value is false. • If value is set to false, then the checksum is printed at bottom left of the bar code. • If value is set to true, then the checksum is printed at middle left of the bar code. For Code 3 of 9, the default - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 80
Values for /Symbology key Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code Default Parameters1 /Bars & /Spaces /Height /EmbedText Characters encoded Symbol2 length Checksum character /Symbology Bar Code Symbology [nu - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 81
Command Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code Default 2 of 5 with 240 1 6 check digit International Standard 620 3 8 Book Number International Standard 620 3 8 Serial Number 18 N odd Yes 16 24 32 N5 104 Yes3 16 24 32 N5 104 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 82
Function/parameters (/Height, /Bars and /Spaces units are in 1/600 inch) Selects the bar code N Identification Marking /USPS-sack USPS sack label, 8-digit 420* 1 9 27 2 of 5 N 8 /USPS-tray USPS tray label, 10-digit 420* 4 9 27 2 of 5 N 10 /USPS-zebra USPS Zebra code 225* 1* 1 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 83
Default parameter 0 /NoText 1 /Embedded 2 /HalfEmbedded 3 /Under 4 /Above 5 Definition Use symbology-dependent default parameter. See "Values for /Symbology key" on page 80. Does not print text Prints embedded text Prints the text half embedded For ISBN and ISSN, this value is not - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 84
/FontName /CG-Times-BoldItalic /OCR-B Example: /FontName /Courier Font attribute for HRT bold italic only one style How to use the symbology ID for ISBN and ISSN ISBN and ISSN bar codes are normally 10 digits in length (see the PCL 5 section above for a complete description), but they have - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 85
the bar code symbology Sets the bar width to 1/100 mm Sets the number of bars that print per inch Sets the tracker height to 1/100 mm [array of integers] - Sets the encoding table Optional Sets the quiet zone in /Units The value is 1/100 mm Singapore Post 4-State bar code Key /Symbology /Bars - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 86
Key /QuietZone /Units Range [int int] - Default value 150 150 (dec) [array of integers] - Description Optional Sets the quiet zone in /Units. The value is 1/100 mm Post 4-State bar code descriptors 86 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 87
Identifies the bar code symbology Sets the bar width to 1/100 mm Sets the number of bars that print per inch Sets the tracker height to 1/100 mm Sets of this field and the tracker height. Optional Sets the quiet zone in /Units The value is 1/100 mm Japan Post 4-State bar code Key /Symbology / - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 88
102-152 (dec) /UpDnBarHeight 160-216 (dec) /QuietZone [int int] /Units - Default value /DutchPostal 50 (dec) [integer] 22 (dec) [integer] 127 the bar code symbology Sets the bar width to 1/100 mm Sets the number of bars that print per inch Sets the synchronization bar height in - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 89
width The default value is 11/600 inch. Sets the space width The default value is 11/600 inch. Optional Sets the quiet zone in /Units Optional The value is 1/600 inch /BarHeight must be: • Greater than or equal to 20 mm for module widths less than or equal to 0.45 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 90
/Under /Above /NoText Description Identifies the bar code symbology The value is fixed. Sets the bar width in /Units Sets the number of bars that print per inch Sets the tracker height in /Units The value is fixed. Sets the ascender and descender offset in 1/100 mm The total height of an ascender - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 91
Note: Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Sets the space widths in /Units Note: Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Defines if and where the HRT is - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 92
Key /FontName /QuietZone Type name [int int] Range See these sections: • Values for / EmbedText key • Values for / FontName key Minimum: [0 0] (dec) Maximum: [1200 1200] (dec) Default value /Courier-Bold [150 150] (dec) [96 96] (hex) Description Optional Defines how the HRT is printed When the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 93
Bar Width 1. • Values beyond the defined range are appropriately clipped and set to the minimum and maximum values. Optional Sets the space widths in /Units Notes: • The range of values for Space Width 2 is dependent on the value of Space Width 1, where Min=2.25 x Space Width 1 Max=3 x Space Width - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 94
Key /EmbedText Type name /FontName name /QuietZone [int int] PLANET Codes Key /Symbology Type name /Pitch int /QuietZone [int int] Range Default value /NoText /Under /Above /NoText See these sections: /Courier-Bold • Values for /EmbedText key • Values for /FontName key - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 95
RANGECHECK error. Required If /Type is set to 0, then the number of symbol columns is set manually. Valid values are 1 to 30. Any value outside this Optional The value is 1/600 inch. Required Sets the module width in /Units. Specifies the X dimension (smallest element width) Example: A value of 15 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 96
value is 0. This designates error correction levels by predetermined values: Integer value Number of error code words 0 2 1 4 2 8 3 16 4 32 ErrorLevel. See "/Error Percent" on page 97. Optional This is not supported. Optional This is not supported. Optional The default value is false - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 97
RANGECHECK error. A valid non-zero value overrides /ErrorLevel. See "/ErrorLevel" on page 96. A zero value causes the /ErrorLevel value to be used. If / 2 %smallest element width in 600th units %smallest element width = 20/600ths %bar height = 40/600ths %number of error code words = 8 %because they - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 98
determines the model of QR element in /Units. The minimum value supported is 1. Arguments number-of-labels field. Both fields are one digit in length and are terminated with either a comma or Group Separator (GS, ASCII 29). • For modes 2 and 3, the postal code, country code, and class of service - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 99
AIM spec). Codes longer than 6 characters are truncated. Codes shorter than 6 characters are padded with spaces. • The country code and class of service must message follows the class of service for modes 2 and 3. For modes 4, 5, and 6, the message follows the number-of-labels field. Arguments for - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 100
B1 (hex) 1890 (dec) 07 62 (hex) 0 (dec) 00 (hex) 0 (dec) 00 (hex) Description Required Identifies the bar code symbology (/MicroPDF417) Optional /Units is used for /ModuleWidth and /ModuleHeight calculations. Optional Sets the X dimension of the module (white or black rectangle) in 100th of an - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 101
Key /FontName /QuietZone Type name [int int] Range Default value See these sections: /Courier-Bold • Values for /EmbedText key • Values for /FontName key Minimum: [0 0] (dec) Maximum: [1200 1200] (dec) [150 150] (dec) [96 96] (hex) Description Optional Defines how the HRT is printed - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 102
/RSS14Truncated /RSS14Stacked /RSS14Limited /RSS14Expanded /Units name /300ths /600ths /1200ths /600ths Optional /Units is used in the calculations. / For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data begins with - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 103
, the sequence uses the "pipe" character "|" to extend the sequence. For example, this is a UPC-A Composite example sequence: (12345678901|Lexmark) > barcodeshow • UPC-A data begins with "12345678901" • Followed by a "|" pipe character • Followed by the composite data string - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 104
to the instructions provided in the Forms and Bar Code Card User's Guide. Adding fonts to existing printer objects Users can add fonts to printer objects in Forms Manager without having to delete and then recreate the printer object. Loading forms to a flash drive Users can download forms to - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 105
the first form delimiter) • Perform a page break after the nth delimiter Adding cc and bcc to e-mail function Users can now specify cc and bcc recipients when sending an e-mail through the printer. Note: This function is available only on multifunction printers that support e-mail and/or fax. Print - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 106
is installed, the PJL LPORTROTATE command will not be supported. Disabling Merge Mode while downloading formsets When downloading formsets with Merge Mode enabled, the formsets are scanned as normal incoming data. This significantly lengthens the time it takes to download formsets to the printer. To - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 107
that support RFID functionality. Printing all forms Users can print information about all the formsets stored on the printer, as well as some printer-specific information. This feature is accessible through the Print All Forms submenu. Note: If a ppf file exists for the formset, then the paper tray - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 108
data Performs the same actions as the ZPL filter, except it uses "@" as the "format instruction" prefix Forms Card font support Forms Card has three types of font support. • Supported-For supported fonts, Forms Card uses the appropriate font file. • Recognized-For recognized fonts, the Forms Card - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 109
Bubble font This font is used for standardized testing forms that are optically read for grading purposes. It is available in Forms Composer when the font "OCRB in Bubbles" is used. The following is a character map for use while designing the formset. Bubble font 109 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 110
's computer font list is richer than that of the printer, a user could easily create a form where not all characters will print. The user can stipulate a supported code page via Forms Composer. Five font families support the international character set. • Intl-Courier • Intl-CG Times • Intl-Univers - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 111
user prints a directory page from the printer control panel. These files must not be tampered with in any way. Chart support The Forms and Bar Code Card supports Card supports both hyphen and underscore variables. Limitations There is a limitation of the border area used in charts. When large number - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 112
(code page 737) Y Y Y NA Greek, Cyrillic monospaced Custom UPR Y font Y NA OMR monospaced font Y Y Y NA Common fonts/metrics on Y Forms Card NA NA Forms Card Features UTF-8, UTF-16 Y Y2 NA DBCS file names Y1 Y Y DBCS bold & italic Y Y NA 1 Supported when the printer - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 113
v3.3.9 Forms Manager v3.3.9 NA Enhanced page delimiters Y • Selection of any hex character Printer Y name) Y NA NA • PRINTNUM (Printer serial Y number) Y NA NA Save variable for reuse Y Y Y NA Single character variable NA NA NA Y subform activ. 1 Supported when the printer - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 114
Card Forms Composer v3.3.9 Document Forms Manager Producer v3.3.9 v3.3.9 Downloadable DBCS fonts Y NA NA Y Forms flash file Y NA NA Unit Y Y Y • SM Unit Condensed Y Y Y • SM Gothic Y Y Y • Roman Y Y Y • OCR B Y Y Y • PLANET Y Y Y 1 Supported when the printer - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 115
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image One-dimensional bar code symbologies Codabar Y Y installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 116
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Code 3 of 9 Sample image Y Y Y Y Y Y Y Code 3 installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 117
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Code 128 Sample image Y Y Y Y Y Y Y 128 installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 118
Document Producer Lexmark Optra Forms Bar code name HIBC128, HIBC 39 Y3 Y Y Y3 Y Y Sample image Comments The HIBC (Health installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 119
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image Interleaved 2 of 5 Y Y Y Y Y Y installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 120
Document Producer Lexmark Optra Forms Bar code name Matrix 2 of 5 Sample image Y Y Y Y accept a variable number of digits up installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 121
Producer Lexmark Optra Forms Bar code name Two-dimensional bar code symbologies Data Matrix Y3 Y Y Y3 Y Y Sample image installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 122
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name MaxiCode Sample image Y Y Y Y Y Y Y1 Comments installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 123
LDSS Document Producer Lexmark Optra Forms Bar code name MicroPDF417 Y3 Y Y Y3 Y Y Sample image Comments MicroPDF417 is a installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 124
.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name QR Y Y Y Y Y Y Sample image Comments QR Code (Quick Response installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 125
Producer Lexmark Optra Forms Bar code name Composite bar code symbologies Composite + UPC Y3 Y Y Y3 Y Y Sample image Comments installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 126
LDSS Document Producer Lexmark Optra Forms Bar code name Composite + EAN Y3 Y Y Y3 Y Y Sample image Comments Composite + UCC/ Y3 Y Y Y3 Y Y EAN 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 127
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Composite + RSS-14 Y3 Y Y Y3 Y Y Sample image Comments 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 128
this code. EAN-8 supports a supplemental two- or five-digit number to be appended to the main bar code symbol. EAN/JAN-8 + 5-digit Y Y Y Y Y Y Y2 supplemental 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 129
Producer Lexmark Optra Forms Bar code name EAN/JAN-13, JIS-UCC Sample image Y Y supports a supplemental two- or five-digit number to be appended to the main bar code symbol. 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 130
issue number of the serial publication. 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 131
Document Producer Lexmark Optra Forms Bar code name RSS (Reduced Y3 Y Y Y3 Y Y Space Symbology) Sample image Comments RSS-14 installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 132
Composer v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name UPC-A Sample image Y Y Y Y Y Y Y UPC-A + installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 133
LDSS Document Producer Lexmark Optra Forms Bar code name UPC-E Sample image Y Y Y Y if the number system digit is 0 and installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 134
v3.3.9 LDSS Document Producer Lexmark Optra Forms Bar code name Sample image Comments Postal bar code symbologies Australia Post installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 135
a parcel number, and a check digit. 1 PDF417 and MaxiCode can be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 136
Producer Lexmark Optra Forms Bar code name Sample image German Postal number, followed optionally by any block and house number installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 137
be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 138
be printed using Optra Forms only when the bar code option is also installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported by the Bar Code Card version 2.4 or later can be printed with Optra - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 139
Producer Lexmark Optra Forms Bar code name USPS tray label 10-digit 2 of 5 Sample image Y Y Y Y Y Y Y2 Comments USPS tray label installed in the printer, and when the accompanying bar code dictionaries have been installed in Optra Forms. 2 All one-dimensional bar code symbologies supported - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 140
C Forms Card fonts Single-byte Forms Card fonts Font name AdobeSansMM AdobeSerifMM Albertus Extra Bold (W1) Albertus Medium (W1) Albertus MT Albertus MT Lt Albertus-ExtraBold Albertus-Medium AlbertusMT AlbertusMT-ExtraBold AlbertusMT-Italic AlbertusMT-Light AlbertusMT-Medium Antique Olive (W1) - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 141
Font name AntiqueOlive-Italic AntiqueOlive-Roman Apple Chancery Apple-Chancery Apple-ChanceryCE Architext CMC7 Arial Arial Black Arial Bold Arial Bold Italic Arial Italic Arial-Bold Arial-BoldItalic Arial-BoldItalicMT Arial-BoldMT ArialCE ArialCE-Bold ArialCE-BoldItalic ArialCE-Italic Arial-Italic - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 142
Font name AvantGarde-DemiOblique Bodoni Bodoni Poster Bodoni PosterCompressed Bodoni-Bold Bodoni-BoldItalic BodoniCE BodoniCE-Bold BodoniCE-BoldItalic BodoniCE-Italic BodoniCE-Poster BodoniCE-PosterCompressed Bodoni-Italic Bodoni-Poster Bodoni-PosterCompressed Bookman Bookman Demi Bookman Demi - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 143
Font name CenturySchlbk-BoldItalic CenturySchlbk-Italic CenturySchlbk-Roman CG Omega (W1) CG Times (W1) CG Times (W1) Bold CG Times (W1) Bold Italic CG Times (W1) Italic CG Times (WE) CG Times (WE) Bold CG Times (WE) Bold Italic CG Times (WE) Italic CG Times (WG) CG Times (WG) Bold CG Times (WG) - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 144
Font name CGOmega-Italic CG-Omega-Italic CGTimes CG-Times CGTimes-Bold CG-Times-Bold CGTimes-BoldItalic CG-Times-BoldItalic CGTimes-Italic CG-Times-Italic Chicago ChicagoCE Clarendon Clarendon Condensed (W1) Clarendon Light Clarendon-Bold ClarendonCE ClarendonCE-Bold ClarendonCE-Light Clarendon- - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 145
Font name Courier New Courier New Bold Courier New Bold Italic Courier New Italic Courier-Bold Courier-BoldItalicTT Courier-BoldOblique Courier-BoldTT CourierCE CourierCE-Bold CourierCE-BoldOblique CourierCE-Oblique CourierHP CourierHP-Bold CourierHP-BoldItalic CourierHP-Italic Courier-ItalicTT - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 146
Font name Garamond-Antiqua Garamond-Halbfett Garamond-Kursiv Garamond-KursivHalbfett Geneva GenevaCE GillSans GillSans Condensed GillSans ExtraBold GillSans Light GillSans-Bold GillSans-BoldCondensed GillSans-BoldItalic GillSansCE-Bold GillSansCE-BoldCondensed GillSansCE-BoldItalic GillSansCE- - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 147
Font name Goudy-Italic Helvetica Helvetica Bold Helvetica Bold Italic Helvetica Condensed Helvetica Italic Helvetica-Black Helvetica-Black Bold Helvetica-Black Bold Italic Helvetica-BlackOblique Helvetica-Bold Helvetica-BoldItalic Helvetica-BoldOblique HelveticaCE HelveticaCE-Black HelveticaCE- - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 148
Font name Helvetica-Light Helvetica-Light Italic Helvetica-LightOblique Helvetica-Narrow Helvetica-Narrow Bold Helvetica-Narrow Bold Italic Helvetica-Narrow Italic Helvetica-Narrow-Bold Helvetica-Narrow-BoldItalic Helvetica-Narrow-BoldOblique Helvetica-Narrow-Italic Helvetica-Narrow-Oblique - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 149
Font name Intl-Univers-BoldItalic Intl-Univers-Condensed-Bold Intl-Univers-Condensed-BoldItalic Intl-Univers-Condensed-Medium Intl-Univers-Condensed-MediumItalic Intl-Univers-Medium Intl-Univers-MediumItalic JoannaMT JoannaMT-Bold JoannaMT-BoldItalic JoannaMTCE JoannaMTCE-Bold JoannaMTCE-BoldItalic - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 150
Font name LubalinGraphCE-DemiOblique LubalinGraph-Demi LubalinGraph-DemiOblique ManufIcons Marigold Marigold (W1) MICR Mona Lisa Recut Monaco MonacoCE MonaLisa-Recut New York NewCenturySchlbk-Bold NewCenturySchlbk-BoldItalic NewCenturySchlbkCE-Bold NewCenturySchlbkCE-BoldItalic NewCenturySchlbkCE- - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 151
Font name Palatino Bold Palatino Bold Italic Palatino Italic Palatino Roman Palatino-Bold Palatino-BoldItalic PalatinoCE-Bold PalatinoCE-BoldItalic PalatinoCE-Italic PalatinoCE-Roman Palatino-Italic Palatino-Roman RomanPillar RomanPillar Bold RomanPillar BoldItalic RomanPillar Italic RomanPillar5 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 152
Font name Times New Roman Bold Times New Roman Bold Italic Times New Roman Italic Times-Bold Times-BoldItalic TimesCE-Bold TimesCE-BoldItalic TimesCE-Italic TimesCE-Roman Times-Italic TimesNewRoman TimesNewRoman-Bold TimesNewRoman-BoldItalic TimesNewRoman-BoldItalicTT TimesNewRoman-BoldTT - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 153
Font name Univers (WE) Bold Italic Univers (WE) Medium Italic Univers (WG) Univers (WG) Bold Univers (WG) Bold Italic Univers (WG) Medium Italic Univers (WL) Univers (WL) Bold Univers (WL) Bold Italic Univers (WL) Medium Italic Univers (WR) Univers (WR) Bold Univers (WR) Bold Italic Univers (WR) - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 154
Font name UniversCE-CondensedBoldOblique UniversCE-CondensedOblique UniversCE-Extended UniversCE-ExtendedObl UniversCE-Light UniversCE-LightOblique UniversCE-Medium UniversCE-Oblique Univers-Condensed Univers-CondensedBold Univers-Condensed-Bold Univers-Condensed-BoldItalic Univers- - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 155
Double-byte Forms Card fonts One DBCS Language is supported: Simplified Chinese. The column on the left indicates common font names. The column on the right indicates the actual font file resident on Forms Card. - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 156
printer. Add memory to printer. Add memory to printer. Missing or corrupt file- download formsets again. Missing or corrupt file- download formsets again. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Download formset again. Add memory to printer. User - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 157
printer. Contact Lexmark Service. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. User or internal error Download formsets. Contact Lexmark - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 158
. Add memory to printer. Contact Lexmark Service. Contact Lexmark Service. Missing or corrupt file- download formsets again. Missing or corrupt file- download formsets again. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory to printer. Add memory - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 159
file missing required element: %s Error type LFM file Insufficient memory XML error XML error Solution Missing or corrupt file- download formsets again. Add memory to printer. Possible corrupt file- download formsets again. Possible corrupt file- download formsets again. Forms print errors 159 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 160
: !ERR: 12 Invalid Character PostScript error messages To assist with troubleshooting, the Forms and Bar Code Card generates error messages when an invalid bar code condition occurs. PostScript error reporting must be enabled on the printer for these messages to be printed out. If an error occurs - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 161
Errors common to all symbologies Error code 1 2 3 4 5 6 7 8 9 10 11 18 19 Error description Unexpected error NULL data Invalid structure No active bar codes Structure out of range Parameter buffer NULL Parameter buffer too small Parameters not saved Unknown bar code type Unknown bar code ID - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 162
String errors Invalid String Character Empty Error code 12 13 EAN/JAN 8/113 X EAN/UCC Composite X French Post X German Post X HIBC X ISBN X ISSN X ITF14 X Japan Post X MaxiCode MicroPDF417 MSI Plessey X X OMR X X PDF417 X PLANET X QR Code X RSS14 X Singapore - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 163
PDF417 PDF417 QR QR QR QR SA SA Aztec 32 DM 33 DM 34 DM 35 Aust Post 36 Aust Post 37 Aust Post Invalid model Model not found Invalid ECI Invalid version Invalid number of symbols Invalid symbol number number too long Unit measure digit only Invalid lot number Common error messages 163 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 164
Error code 52 53 54 55 56 57 58 60 61 62 63 Symbology HIBC HIBC HIBC Intelligent Mail MaxiCode MaxiCode MSI Plessey MicroPDF MicroPDF MicroPDF MicroPDF Error description Special link char missing Invalid 2-digit quantity Invalid 5-digit quantity Invalid bar code identifier Invalid encoding string - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 165
(referred to as "HP BDP"), or the Lexmark Bar Code Card version 3.3. (referred to as HP BDP. The BCE does not support lowercase "a-z" character input, and does Forms and Bar Code Card firmware must convert any code 93 C, D", and the bar code image itself is encoded properly with uppercase - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 166
specs noted above, and does not translate lowercase to uppercase. Therefore, the Forms and Bar Code Card firmware . Large bar codes may not fit on the page, or the reliability of the scan may begin to images. The maximum amount of input data is shown in the table below. This table is just a guide - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 167
user should change to a more capable bar code symbology. 4-State postal widths The BCE creates 4-State postal images that may not be exactly the same as HP BDP or the LXK BCC. The number size compatibility of certain 4-State bar code image sizes with previous Lexmark bar code options is not assured. - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 168
previous Lexmark bar code options is not assured. However, the bar code will still scan correctly. If the bar code image does not fit within the available space, then users should either resize their form to allow placement of current and previous bar code images, or specify an absolute number of - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 169
bytes Section 2.1 states: • "The total number of codewords in the data region of should be allowed and truncated by firmware before the BCE is called. prevent the BCE from throwing errors on pages with excess data, while encoding as , but users should never exceed these values. If users were to - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 170
Code Technical Reference manual version 3.2, and the HP BarDIMM Technical Reference manual from version 3.0 such a combined bar code series. The SuchyMIPS BCE supports structured appends, and so number 2 or 3, plus a separator) are included in the input data, then the BCE will throw an error. Users - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 171
, decimal 44 Any other separator characters should produce an error on the page. 3 MaxiCode Separator Change (add a second separator character) In the past, for all modes, the input data had to start with a label-number field and number-of-labels field. Both fields were one digit in length, and were - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 172
firmware-imposed limits on certain bar codes. These limits are less than the original LXK BCC, but are needed to prevent corruption of bar code images absence of start/stop characters, if users attempt to encode a Codabar bar code does not work as on previous Lexmark Bar Code options. The barcodepath - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 173
printer is turned on, then an error page will print and the job will be flushed. The printer will then return to Ready state. • If the Print PS Error setting of the printer is turned off, then the job will be flushed and the printer in the current HP BDP technical reference manual. Deviations 173 - Lexmark MS610de | Forms and Bar Code Card Technical Reference Guide - Page 174
www.lexmark.com
www.lexmark.com
October 2012
Forms and Bar Code Card 3.3
Technical Reference Manual