Lexmark MS711 Paper Guide
Lexmark MS711 Manual
 |
View all Lexmark MS711 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MS711 manual content summary:
- Lexmark MS711 | Paper Guide - Page 1
Page 1 of 4 Media Guide The printer supports the following paper and specialty media sizes. Select custom sizes up to the maximum measurements specified for the Universal setting. Paper sizes supported by the printer Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet trays Optional - Lexmark MS711 | Paper Guide - Page 2
ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat. Avoiding jams Load paper properly • Make sure paper lies flat in the tray. Correct loading of paper Incorrect loading of paper • Do not remove a tray while the printer is printing. • Do not load a tray - Lexmark MS711 | Paper Guide - Page 3
to adjust the bin extender fully so that the paper enters the bin properly. Notes: - If the bin extender is shorter than the size of the paper you are printing on, then the paper causes a jam in the mailbox bin. For example, if you are printing on a legal-size paper and the bin extender is set to - Lexmark MS711 | Paper Guide - Page 4
crease the paper. Straighten the edges on a level surface. • Do not use paper that has been cut or trimmed by hand. • Do not mix paper sizes, weights, or types in the same tray. • Make sure the paper size and type are set correctly on the computer or printer control panel. • Store paper according to
-
1 -
2 -
3 -
4
 |
 |
Media Guide
The printer supports the following paper and specialty media sizes. Select custom sizes up to the maximum measurements
specified for the Universal setting.
Paper sizes supported by the printer
Paper size
1
Dimensions
Standard or
optional 250
‑
or
550
‑
sheet trays
Optional
2100
‑
sheet tray
Multipurpose
feeder
Duplex
A4
210 x 297 mm
(8.3 x 11.7 in.)
A5
148 x 210 mm
(5.8 x 8.3 in.)
A6
105 x 148 mm
(4.1 x 5.8 in.)
X
JIS B5
182 x 257 mm
(7.2 x 10.1 in.)
X
Letter
216 x 279 mm
(8.5 x 11 in.)
Legal
216 x 356 mm
(8.5 x 14 in.)
Executive
184 x 267 mm
(7.3 x 10.5 in.)
X
Oficio
216 x 340 mm
(8.5 x 13.4 in.)
Folio
216 x 330 mm
(8.5 x 13 in.)
Statement
140 x 216 mm
(5.5 x 8.5 in.)
X
Universal
2
105
x
148 mm to 216
x 356 mm (4.13 x
5.83 in. to 8.5 x 14 in.)
X
70 x 127 mm to
216 x 356 mm
(2.76 x 5
to 8.5 x 14 in.)
X
X
X
1
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that
correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select
Universal
or turn off tray size sensing. For more information, contact customer support.
2
To support two
‑
sided (duplex) printing, the Universal width must be between 105 mm (4.13 inches) and 216 mm (8.5 inches); the
Universal length must be between 148 mm (5.83 inches) and 356 mm (14 inches).
Media Guide
Page 1 of 4