Lexmark MS810 Moving Guide
Lexmark MS810 Manual
View all Lexmark MS810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MS810 manual content summary:
- Lexmark MS810 | Moving Guide - Page 1
unplug the power cord from the electrical outlet. • Disconnect all cords and cables from the printer. • If two or more optional finishers are installed, then remove the finishers individually from the printer. Notes: - Make sure to remove the topmost finisher first. - To remove the finisher, hold - Lexmark MS810 | Moving Guide - Page 2
. When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options, then leave enough room sturdy, and stable surface. • Keep the printer: - Clean, dry, and free of dust. - Away from stray staples and paper clips. - Away from the - Lexmark MS810 | Moving Guide - Page 3
cart used to move the hardware options must have a surface able to support the dimensions of the hardware options. • Keep the printer in an upright position. • Avoid severe jarring movements. Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for
Moving Guide
Before moving the printer
CAUTION—POTENTIAL INJURY:
Before moving the printer, follow these guidelines to avoid personal injury or printer
damage:
•
Turn off the printer, and then unplug the power cord from the electrical outlet.
•
Disconnect all cords and cables from the printer.
•
If two or more optional finishers are installed, then remove the finishers individually from the printer.
Notes:
–
Make sure to remove the topmost finisher first.
–
To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.
•
If the printer does not have a caster base, then remove the optional trays.
Note:
Slide the latch on the right side of the printer toward the front of the printer until it
clicks
into place.
Moving Guide
Page 1 of 3