Lexmark MS810 Paper Guide

Lexmark MS810 Manual

Lexmark MS810 manual content summary:

  • Lexmark MS810 | Paper Guide - Page 1
    custom sizes up to the maximum measurements specified for the Universal setting. Paper sizes supported by the printer Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet trays Optional 2100‑sheet tray Multipurpose feeder Duplex A4 210 x 297 mm (8.3 x 11.7 in.) A5 148 x 210 mm
  • Lexmark MS810 | Paper Guide - Page 2
    Media Guide Page 2 of 4 Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet trays Optional 2100‑sheet tray Multipurpose feeder Duplex 10 Envelope 105 x 241 mm X X (4.1 x 9.5 in.) DL Envelope 110 x 220 mm X X (4.3 x 8.7 in.) C5 Envelope 162 x 229 mm X X (6.38 x 9.01 in
  • Lexmark MS810 | Paper Guide - Page 3
    Media Guide Page 3 of 4 Correct loading of paper Incorrect loading of paper • Do not remove a tray while the printer is printing. • Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it. • Do not load too much paper. Make sure the stack height is
  • Lexmark MS810 | Paper Guide - Page 4
    loading it. Media Guide Page 4 of 4 • Do not use paper that has been cut or trimmed by hand. • Do not mix paper sizes, weights, or types in the same tray. • Make sure the paper size and type are set correctly on the computer or printer control panel. • Store paper per manufacturer recommendations
  • 1
  • 2
  • 3
  • 4

Media Guide
The printer supports the following paper and specialty media sizes. Select custom sizes up to the maximum measurements
specified for the Universal setting.
Paper sizes supported by the printer
Paper size
1
Dimensions
Standard or
optional 250
or
550
sheet trays
Optional
2100
sheet tray
Multipurpose
feeder
Duplex
A4
210 x 297 mm
(8.3 x 11.7 in.)
A5
148 x 210 mm
(5.8 x 8.3 in.)
A6
105 x 148 mm
(4.1 x 5.8 in.)
X
JIS B5
182 x 257 mm
(7.2 x 10.1 in.)
X
Letter
216 x 279 mm
(8.5 x 11 in.)
Legal
216 x 356 mm
(8.5 x 14 in.)
Executive
184 x 267 mm
(7.3 x 10.5 in.)
X
Oficio
216 x 340 mm
(8.5 x 13.4 in.)
Folio
216 x 330 mm
(8.5 x 13 in.)
Statement
140 x 216 mm
(5.5 x 8.5 in.)
X
Universal
2
105
x
148 mm to 216
x 356 mm (4.13 x
5.83 in. to 8.5 x 14 in.)
X
70 x 127 mm to
216 x 356 mm
(2.76 x 5
to 8.5 x 14 in.)
X
X
X
7 3/4 Envelope (Monarch)
98 x 191 mm
(3.9 x 7.5 in.)
X
X
9 Envelope
98 x 225 mm
(3.9 x 8.9 in.)
X
X
1
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that
correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select
Universal
or turn off tray size sensing. For more information, contact customer support.
2
To support two
sided (duplex) printing, the Universal width must be between 105 mm (4.13 inches) and 216 mm (8.5 inches); the
Universal length must be between 148 mm (5.83 inches) and 356 mm (14 inches).
Media Guide
Page 1 of 4