Lexmark MS810 Print Quality Guide

Lexmark MS810 Manual

Get Lexmark MS810 PDF manuals and user guides View all Lexmark MS810 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark MS810 manual content summary:

  • Lexmark MS810 | Print Quality Guide - Page 1
    the fonts installed on the computer supported by the printer? Clipped pages or images Action Yes Step 1 Go to step 2. a Move the width and length guides in the tray to the correct positions for the paper loaded. b Resend the print job. Is the page or image clipped? No The problem is solved
  • Lexmark MS810 | Print Quality Guide - Page 2
    1 Remove the toner cartridge. 2 Remove the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 3 Install the imaging unit, and then the cartridge. b Resend the print job. Is
  • Lexmark MS810 | Print Quality Guide - Page 3
    can cause print quality problems. c Install the imaging unit, and then the cartridge. d Resend the print job. Go to step 3. Did the gray background disappear from the prints? Step 3 Replace the imaging unit, and then resend the print job. The problem is solved. Contact customer support. Did the
  • Lexmark MS810 | Print Quality Guide - Page 4
    exposure to light may cause print quality problems. 3 Reinstall the imaging unit, and then the cartridge. b Resend the print job. Do horizontal voids appear on prints? Step 4 Replace the imaging unit, and then resend the print job. Contact customer support. Do horizontal voids appear on
  • Lexmark MS810 | Print Quality Guide - Page 5
    paper size in the Paper menu to match the paper loaded in the tray. Does the paper size match the paper loaded in the tray? Step 3 a Depending on your operating system, specify the paper size from Printing Preferences or from the Print dialog. b Resend the print job. The problem is solved. No Do
  • Lexmark MS810 | Print Quality Guide - Page 6
    and length guides in the tray to the correct positions for the size of the paper loaded in the tray. b Resend the print job. No The problem is solved. Do print irregularities still appear? Step 2 Go to step 3. From the printer control panel, set the paper size and type in the Paper menu to
  • Lexmark MS810 | Print Quality Guide - Page 7
    customer The problem is solved. support at http://support.lexmark. com or your service representative. Print is too dark Action Step 1 a From the Quality menu on the printer control panel, reduce the toner darkness. Note: 8 is the factory default setting. b Resend the print job. Yes Go
  • Lexmark MS810 | Print Quality Guide - Page 8
    too dark? Step 6 Replace the imaging unit, and then resend the print job. Contact customer support. The problem is solved. Is the print still too dark? Print is too light Action Step 1 a From the Quality menu on the printer control panel, increase the toner darkness. Note: 8 is the factory
  • Lexmark MS810 | Print Quality Guide - Page 9
    to light may cause print quality problems. 3 Install the imaging unit, and then the cartridge. b Resend the print job. The problem is solved. Is the print still too light? Step 7 Replace the imaging unit, and then resend the print job. Contact customer support. The problem is solved. Is the
  • Lexmark MS810 | Print Quality Guide - Page 10
    print quality problems. 3 Reinstall the imaging unit, and then the cartridge. b Resend the print job. Is the printer still printing blank pages? Step 3 Replace the imaging unit, and then resend the print job. Contact customer support. Is the printer still printing blank pages? No The problem
  • Lexmark MS810 | Print Quality Guide - Page 11
    to light may cause print quality problems. 2 Install the imaging unit, and then the cartridge. b Resend the print job. Is the printer printing solid black pages? Step 2 Replace the imaging unit, and then resend the print job. Contact customer support. Is the printer printing solid black pages
  • Lexmark MS810 | Print Quality Guide - Page 12
    the imaging unit, and then resend the print job. Contact customer support. Do shadow images still appear on prints? No Load paper with the correct paper type and weight in the tray. Change the paper loaded in the tray to match the paper type and weight specified in the tray settings. The problem
  • Lexmark MS810 | Print Quality Guide - Page 13
    operating system, specify the tray or feeder from Printing Preferences or the Print dialog. b Resend the print job. Do streaked horizontal lines appear on prints? Step 2 Go to step 3. From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in
  • Lexmark MS810 | Print Quality Guide - Page 14
    exposure to light may cause print quality problems. 2 Install the imaging unit, and then the cartridge. b Resend the print job. Do streaked horizontal lines appear on prints? Step 5 Replace the imaging unit, and then resend the print job. Contact customer support. Do streaked horizontal lines
  • Lexmark MS810 | Print Quality Guide - Page 15
    the toner cartridge, and then the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 2 Install the imaging unit, and then the cartridge. b Resend the print job. The problem
  • Lexmark MS810 | Print Quality Guide - Page 16
    disappear from the prints? Step 2 Replace the imaging unit, and then resend the print job. The problem is solved. Contact customer support. Did the toner fog or background shading disappear from the prints? Toner rubs off Action Yes No Step 1 From the Paper menu on the printer control panel
  • Lexmark MS810 | Print Quality Guide - Page 17
    appear on prints Action Replace the imaging unit, and then resend the print job. Do toner specks appear on prints? Yes Contact customer support. Transparency print quality is poor Action Yes Step 1 Go to step 2. From the printer control panel, set the paper type in the Paper menu to match
  • Lexmark MS810 | Print Quality Guide - Page 18
    Action Replace the imaging unit, and then resend the print job. Is the print density uneven? Vertical voids appear on prints Print quality Guide Page 18 of 19 Yes Contact customer support. No The problem is solved. Action Step 1 a Make sure your software program is using a correct fill pattern.
  • Lexmark MS810 | Print Quality Guide - Page 19
    your printer problem or provide assistance through Assisted Service where the service representative can remotely connect to your computer through the Internet to troubleshoot problems, install updates, or complete other tasks to help you successfully use your Lexmark product. Telephone support is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
Print quality Guide
Characters have jagged or uneven edges
Action
Yes
No
Step 1
a
Print a font sample list to check if the fonts you are using are supported by
the printer.
1
From the printer control panel, navigate to:
Menus
>
Reports
>
Print Fonts
2
Select
PCL Fonts
or
PostScript Fonts
.
b
Resend the print job.
Are you using fonts that are supported by the printer?
Go to step 2.
Select a font that is
supported by the printer.
Step 2
Check if the fonts installed on the computer are supported by the printer.
Are the fonts installed on the computer supported by the printer?
The problem is solved.
Contact
customer
support
.
Clipped pages or images
Action
Yes
No
Step 1
a
Move the width and length guides in the tray to the correct positions for the
paper loaded.
b
Resend the print job.
Is the page or image clipped?
Go to step 2.
The problem is solved.
Print quality Guide
Page 1 of 19