Lexmark MS812dn Printing Guide

Lexmark MS812dn Manual

Get Lexmark MS812dn PDF manuals and user guides View all Lexmark MS812dn manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark MS812dn manual content summary:

  • Lexmark MS812dn | Printing Guide - Page 1
    Page 1 of 18 Printing Guide Loading the 250‑ or 550‑sheet tray CAUTION-POTENTIAL INJURY: To reduce the risk of while Busy appears on the display. Doing so may cause a jam. 2 Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.
  • Lexmark MS812dn | Printing Guide - Page 2
    size indicators at the bottom of the tray to help position the guides. 3 Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded. Notes: • Lock the length guide for all paper sizes. • Use the paper size indicators at the bottom
  • Lexmark MS812dn | Printing Guide - Page 3
    Printing Guide Page 3 of 18 4 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
  • Lexmark MS812dn | Printing Guide - Page 4
    Printing Guide Page 4 of 18 • If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of
  • Lexmark MS812dn | Printing Guide - Page 5
    Printing Guide Page 5 of 18 • Make sure the paper is below the solid line, which is the maximum paper fill indicator. Warning-Potential Damage: Overfilling the tray can cause paper jams.
  • Lexmark MS812dn | Printing Guide - Page 6
    sides of the stack, and then lock the length guide. 7 Insert the tray. 8 From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems.
  • Lexmark MS812dn | Printing Guide - Page 7
    instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray. 2 Adjust the width and length guides. Loading A5‑size paper a Pull up and slide the width guide to the position for A5. 1 LGLOFCFOLLITOR A4 A5 2 LGLOFCFOLLITOR A4 A5 LGLOFCFOLILOTR A4 A5
  • Lexmark MS812dn | Printing Guide - Page 8
    b Squeeze and slide the length guide to the position for A5 until it clicks into place. Printing Guide Page 8 of 18 1 2 c Remove the A5 length guide from its holder. 1 2 d Insert the A5 length guide into its designated slot. Note: Press the A5 length guide until it clicks into place.
  • Lexmark MS812dn | Printing Guide - Page 9
    folio‑size paper a Pull up and slide the width guide to the correct position for the size of the paper being loaded. 1 LGLOFCFOLLITOR A4 A5 2 LGLOFCFOLLITOR A4 A5 LGLOFCFOLILOTR A4 A5 b If the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length
  • Lexmark MS812dn | Printing Guide - Page 10
    c Put the A5 length guide in its holder. Printing Guide Page 10 of 18 1 2 d Squeeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks into place.
  • Lexmark MS812dn | Printing Guide - Page 11
    Printing Guide Page 11 of 18 3 Flex and fan the sheets to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
  • Lexmark MS812dn | Printing Guide - Page 12
    Printing Guide Page 12 of 18 Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam
  • Lexmark MS812dn | Printing Guide - Page 13
    Printing Guide Page 13 of 18 6 From the printer control panel, set the size and type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems. Loading the multipurpose feeder 1 Pull down the multipurpose feeder
  • Lexmark MS812dn | Printing Guide - Page 14
    EXECB5 A4 A5 LTR EXECB5 A4 A5 LTR 2 Pull the multipurpose feeder extender. Printing Guide Page 14 of 18 Note: Guide the extender gently so that the multipurpose feeder is fully extended and open. 3 Slide the width guide to the correct position for the size of the paper being loaded. Note: Use
  • Lexmark MS812dn | Printing Guide - Page 15
    LTR A5 A 4 EXECB5 Printing Guide Page 15 of 18 4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them, and then fan
  • Lexmark MS812dn | Printing Guide - Page 16
    ABC ABC Printing Guide Page 16 of 18 Without an optional staple finisher With an optional staple finisher ABC One‑sided printing ABC One‑sided printing Two‑sided printing
  • Lexmark MS812dn | Printing Guide - Page 17
    down and on the left of the multipurpose feeder. Printing Guide Page 17 of 18 R LT 5 A A 4 C adhesives. These envelopes may severely damage the printer. • Make sure the paper or paper, adjust the width guides to lightly touch the sides of the stack. 7 From the printer control panel, set the
  • Lexmark MS812dn | Printing Guide - Page 18
    Printing Guide Page 18 of 18 Setting the paper size and type 1 From the printer control panel, navigate to: > Settings > > Paper Menu > > Paper Size/Type > 2 Press the up or down arrow button to select the tray or feeder, and then
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
Printing Guide
Loading the 250
‑
or 550
‑
sheet tray
CAUTION—POTENTIAL INJURY:
To reduce the risk of equipment instability, load each tray separately. Keep all other trays
closed until needed.
1
Pull out the tray.
Notes:
•
When loading folio
‑
, legal
‑
, or Oficio
‑
size paper, lift the tray slightly and pull it out completely.
•
Avoid removing trays while a job prints or while
Busy
appears on the display. Doing so may cause a jam.
2
Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it
clicks
into place.
Printing Guide
Page 1 of 18