Lexmark MX511 Card Stock & Label Guide

Lexmark MX511 Manual

Get Lexmark MX511 PDF manuals and user guides View all Lexmark MX511 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark MX511 manual content summary:

  • Lexmark MX511 | Card Stock & Label Guide - Page 1
    Card Stock & Label Guide Laser Printers October 2012 www.lexmark.com
  • Lexmark MX511 | Card Stock & Label Guide - Page 2
    products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. © 2012 Lexmark International, Inc. All rights
  • Lexmark MX511 | Card Stock & Label Guide - Page 3
    material...8 Design factors...9 Pick roller technology...11 Maintenance procedures...14 Troubleshooting...14 Card stock 16 Weight...16 Grain ...25 Printer specifications 32 Lexmark C500n...32 Lexmark C510...33 Lexmark C520, C522, and C524...34 Lexmark C530, C532, and C534...36 Lexmark C540,
  • Lexmark MX511 | Card Stock & Label Guide - Page 4
    and C736...42 Lexmark C746 and C748...44 Lexmark C750...46 Lexmark C752...48 Lexmark C760 and C762...51 Lexmark C770, C772, C780, and C782...53 Lexmark C792e, C792de, C792dte, and C792dhe 54 Lexmark C910...56 Lexmark C912...58 Lexmark C920...59 Lexmark C925...61 Lexmark C935...62 Lexmark C950...64
  • Lexmark MX511 | Card Stock & Label Guide - Page 5
    , X792dte, X792dtfe, X792dtpe, X792dtme, and X792dtse 141 Lexmark X850, X852e, and X854e...143 Lexmark X860e, X862e, and X864e...145 Lexmark X925...147 Lexmark X940 and X945...149 Lexmark X950...150 Optra plus, 4039, 4029, 4019, WinWriter 600 printers 151 Optra C...155 Optra C710...155 Optra Color
  • Lexmark MX511 | Card Stock & Label Guide - Page 6
    Contents 6 Optra W810...172 Glossary 174 Index...178
  • Lexmark MX511 | Card Stock & Label Guide - Page 7
    guidelines to help you select appropriate print materials for the following Lexmark laser printers. Series Printer models 4019 4029 4039 10 plus 4039 12C C series E see the printer registration card, information on the printer CD, or visit the Lexmark Web site at http://support.lexmark.com. Note
  • Lexmark MX511 | Card Stock & Label Guide - Page 8
    for use in laser printers. • Distributors are generally the direct link to the customer. As needs and prices change, distributors may work are thicker. Proper printer maintenance can help you avoid these problems. For information about maintaining your printer, see "Maintenance procedures" on
  • Lexmark MX511 | Card Stock & Label Guide - Page 9
    a problem you have with an existing application. In addition, Lexmark has worked with several suppliers and has business partners in this field. For technical assistance contact numbers, see the printer registration card, information on the printer CD, or visit the Lexmark Web site at http://support
  • Lexmark MX511 | Card Stock & Label Guide - Page 10
    image appears raised above the surface of the print material. These inks can melt and damage the fuser assembly. Preprinted inks must also be abrasion resistant to reduce ink dust and ink contamination in the printer. If you are printing over a preprinted area, the ink must be receptive to toner
  • Lexmark MX511 | Card Stock & Label Guide - Page 11
    to have installed a maintenance kit as specified (if applicable) • use of printing media outside of Lexmark specifications • use of non‑Lexmark supplies (such as toner cartridges and/or inkjet cartridges) • use of non‑Lexmark product or component Pick roller technology Some printers have an auto
  • Lexmark MX511 | Card Stock & Label Guide - Page 12
    General information 12 For the following printers, make sure perforations fall outside the 0.3-0.79‑inch area on the leading edge of the media: Optra S, Optra T, T520, T522, T620, T622, T630, T632, T634,
  • Lexmark MX511 | Card Stock & Label Guide - Page 13
    General information 13 For the following printers, make sure perforations fall outside the 0.31-1.05‑inch area on the leading edge of the media: C520, C522, C524, C530, C532, C534, C540, C543,
  • Lexmark MX511 | Card Stock & Label Guide - Page 14
    , repeat this cleaning process every time you replace the toner cartridge. Note: Failure to follow maintenance procedures for your printer could cause jams, poor print quality, feeding problems, and fuser problems. Troubleshooting The following table provides solutions to some common card stock
  • Lexmark MX511 | Card Stock & Label Guide - Page 15
    General information 15 Problem Print on heavy stock is blurred or out of focus. Toner rubs off the page. Printing for approximately five seconds, and then print five more sheets of paper to remove any toner that may have accumulated. Make sure the Paper Type setting is correct for your print
  • Lexmark MX511 | Card Stock & Label Guide - Page 16
    may not be enough voltage to pull the toner onto the paper properly, resulting in poor print quality. To determine if your printer supports cover stock, see the section for your printer in the "Printer specifications" chapter and review the supported paper type information. You can also view the
  • Lexmark MX511 | Card Stock & Label Guide - Page 17
    first. For lighter card stocks, grain long is recommended to reduce potential curl problems. Curl may decrease the ability of the form to move reliably through the printer. Most printers feed paper short edge first. If your printer supports larger paper sizes, such as 11 x 17 in. or A3, it may feed
  • Lexmark MX511 | Card Stock & Label Guide - Page 18
    surfaces or surfaces that mimic laid finishes (glossy paper, not glossy card stock, is acceptable for some printers). Paper smoothness also affects print quality. If the paper is too rough, the toner does not fuse to the paper properly; if the paper is too smooth, it can affect feed reliability
  • Lexmark MX511 | Card Stock & Label Guide - Page 19
    printed page right before it reaches the stacker on the offset printing press. This powder provides an intermediate layer between two sheets of paper, preventing ink from transferring from one sheet to another.
  • Lexmark MX511 | Card Stock & Label Guide - Page 20
    printer and cartridge service warranties. Do not feed labels through the printer more than once. Doing so may contaminate the cartridge and other components with adhesive. Depending on your printer model and the number of labels being printed, printing labels may require special printer maintenance
  • Lexmark MX511 | Card Stock & Label Guide - Page 21
    against contamination or buildup. Contamination could result in paper feed problems and paper jams. We recommend the use of label sheets that printer, thereby preventing any adhesive contamination in the printer. The following graphics show the rib locations for the Optra S, Optra T, and Lexmark
  • Lexmark MX511 | Card Stock & Label Guide - Page 22
    . You may also use the wiper when using the printer to print on one side of a label sheet or both sides of a sheet of paper. When ordering a new cartridge, be sure to order the cartridge that includes the correct fuser wiper. Primary rib pattern design guidelines for reference edge alignment
  • Lexmark MX511 | Card Stock & Label Guide - Page 23
    than an auto compensator to separate the sheets. The following table shows which printers use a corner buckler and which use an auto compensator. Note: If your printer is not listed here, then contact your Lexmark representative to verify which method your printer uses to separate sheets of labels.
  • Lexmark MX511 | Card Stock & Label Guide - Page 24
    ‑sensitive constructions using Kraft liners. Tissue‑backed or plain bond liners reduce toner contamination inside the printer and improve feed performance. Slick, non‑porous liners are harder to feed and increase toner buildup in the fuser and on the backup roll. Rough backings, on the other hand
  • Lexmark MX511 | Card Stock & Label Guide - Page 25
    printing problem is printer and cartridge contamination. The adhesives are semi‑liquid and may contain volatile components. If the sheet jams in the fuser, the adhesive can melt, thereby contaminating parts of the printer or releasing fumes. To avoid exposing adhesive to the paper path guides, drive
  • Lexmark MX511 | Card Stock & Label Guide - Page 26
    in.) at leading edge 279.4 mm (11 in.) at driver edge Using cut sheet labels with adhesive applied to the edge of the sheet will contaminate your printer and your cartridge and could void your printer and cartridge warranties. When using pressure‑sensitive materials without zone coating, choose
  • Lexmark MX511 | Card Stock & Label Guide - Page 27
    Leading Edge 8.5 in. 215.9 mm Waste strip 0.25 in (6.35 mm) Non-print area 0.33 in. 8.38 mm 0.5 in. Top perforation 12.7 mm Waste strip Driver edge 11 in. 279.4 mm 0.06 in. 1.6 mm Perforation end Liner edge 0.33 in. 8.38 mm Non-print area 0.25 in. 6.35 mm Non-print
  • Lexmark MX511 | Card Stock & Label Guide - Page 28
    Labels 28 The following diagram shows a recommended label design for the T640 and T650 laser printers.
  • Lexmark MX511 | Card Stock & Label Guide - Page 29
    Cut sheet paper labels • Generally, cut sheet paper labels work well with your printer. • Coating or sizing to make the paper liquid‑resistant decreases toner adhesion and increases the risk of toner contaminating the fuser. At a minimum, paper labels should be equivalent in weight and rigidity to
  • Lexmark MX511 | Card Stock & Label Guide - Page 30
    • To help prevent material from slipping in the fuser, we recommend knurling, which roughens up the exposed printer, which will require printer servicing. For more information on recommended label designs, see "Label design guidelines" on page 25. • For Optra S, Optra T, and Lexmark T printers
  • Lexmark MX511 | Card Stock & Label Guide - Page 31
    are non‑absorbing, which leads to toner build‑up in the fuser that requires special maintenance. See the documentation that came with your printer for specific information about maintaining your printer. Vinyls may require a topcoat to ensure good toner adhesion. • Polyester labels are less heat
  • Lexmark MX511 | Card Stock & Label Guide - Page 32
    printers. The Lexmark C500n does not support vinyl or polyester labels. The Lexmark C500n supports 90-210‑g/m2 (24-55‑lb) stock. Card stock and labels are supported from Tray 1 and Tray 2. Tray 1 supports information on the supported media sizes, see the printer User's Guide on the publications CD.
  • Lexmark MX511 | Card Stock & Label Guide - Page 33
    C510 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C510 does not support vinyl or polyester labels. The Lexmark C510 supports stocks up to 176 g/m2. Feed labels from the standard tray only, which holds up to 80 sheets of labels or up to
  • Lexmark MX511 | Card Stock & Label Guide - Page 34
    use of paper office labels designed for laser printers. The Lexmark C520, C522, and C524 do not support vinyl or polyester labels. The Lexmark C520, C522, and C524 support stocks up to 176 g/m2. Card stock is supported from Tray 1, Tray 2, the manual feed slot, and the multipurpose feeder. Labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 35
    : Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD.
  • Lexmark MX511 | Card Stock & Label Guide - Page 36
    , always set Paper Type to Card Stock. For more information, see "Pick roller technology" on page 11. Lexmark C530, C532, and C534 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C530, C532, and C534 do not support vinyl or polyester labels.
  • Lexmark MX511 | Card Stock & Label Guide - Page 37
    Printer specifications 37 The Lexmark C530, C532, and C534 support stocks up to 176 g/m2. Card stock and labels are supported from Tray 1, Tray 2, the manual feed slot, and the multipurpose feeder. Tray 1 supports approximately 120 sheets of card stock, and Tray 2 supports approximately 250 sheets
  • Lexmark MX511 | Card Stock & Label Guide - Page 38
    labels Unacceptable labels • We recommend using Avery 5260. • From the printer control panel or from MarkVision Professional, set Paper Type to Labels. , see "Pick roller technology" on page 11. Lexmark C540, C543, C544, and C546dtn Notes: • Your printer may not have a 650‑sheet duo drawer with
  • Lexmark MX511 | Card Stock & Label Guide - Page 39
    office labels designed for laser printers. The Lexmark C540, C543, C544, and C546dtn do not support vinyl or polyester labels. The Lexmark C540, C543, C544, and C546dtn support card stock weights up to 176 g/m2. Card stock and labels are supported from Tray 1, Tray 2, the manual feeder, and the
  • Lexmark MX511 | Card Stock & Label Guide - Page 40
    C720 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C720 does not support vinyl or polyester labels. The Lexmark C720 supports stocks up to 43 lb (163 g/m2). Feed labels from the standard tray only, which holds up to 80 sheets of labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 41
    The following table lists the maximum weights supported. Overview of card stock and label support Paper source Tray 1 (standard tray) Index Bristol 163 g/m2 Card stock Tag 163 g/m2 Cover - For paper and transparency specifications, see the printer User's Guide. Labels Paper 163 g/m2 Vinyl
  • Lexmark MX511 | Card Stock & Label Guide - Page 42
    Printer specifications 42 When printing on card stock: • Feed card stock from Tray 1 only. • We recommend using Springhill Index Plus 90 lb card stock. • For the best print quality, always set the Paper Type to Card Stock. Lexmark C734 and C736 Lexmark C734 and C736 support card stock and labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 43
    Bristol (110 lb) Up to 203 g/m2 Tag (125 lb) Weight: Up to 216 g/m2 (80 lb) For more information on the supported media sizes, see the printer User's Guide on the publications CD. Card stock and label guidelines When printing on labels: • Print samples on the labels being considered for use
  • Lexmark MX511 | Card Stock & Label Guide - Page 44
    may significantly affect the print quality and cause jams or other paper‑handling problems. For more information, see "Pick roller technology" on page 11. Lexmark C746 and C748 The Lexmark C746 and C748 printer models support card stock and labels from the standard 550‑sheet tray, an optional 550
  • Lexmark MX511 | Card Stock & Label Guide - Page 45
    Bristol (110 lb) Up to 203 g/m2 Tag (125 lb) Up to 216 g/m2 Cover (80 lb) For more information on the supported media sizes, see the printer User's Guide on the Software and Documentation CD. Card stock and label guidelines When printing on labels: • Print samples on the labels being considered
  • Lexmark MX511 | Card Stock & Label Guide - Page 46
    and cause jams or other paper‑handling problems. For more information, see "Pick roller technology" on page 11. Lexmark C750 The Lexmark C750 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder
  • Lexmark MX511 | Card Stock & Label Guide - Page 47
    20-32°C (68-90°F). 4 Pressure‑sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark C750 Publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length
  • Lexmark MX511 | Card Stock & Label Guide - Page 48
    . Contact your local service representative for ordering information. If you print large quantities of labels or other glossy print media, replace the fuser housing with a web oiler field upgrade kit (P/N 12G6307 for a 115 V printer, P/N 12G6308 for a 220 V printer). When printing on labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 49
    C752 prints on many labels designed for use with laser printers. The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m2 paper, reliably feed all supported media. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: The optional
  • Lexmark MX511 | Card Stock & Label Guide - Page 50
    for laser printers. A fuser equipped with a web oiler may be required for label applications to optimize feed reliability. Contact your local service representative for technology" on page 11 • "Grain orientation" on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14
  • Lexmark MX511 | Card Stock & Label Guide - Page 51
    specifications 51 Lexmark C760 and C762 Lexmark C760 and C762 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2,000‑sheet drawer supports paper only. Print material
  • Lexmark MX511 | Card Stock & Label Guide - Page 52
    . Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. Print on sheets with more
  • Lexmark MX511 | Card Stock & Label Guide - Page 53
    specifications 53 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 Lexmark C770, C772, C780, and C782 The Lexmark C770, C772, C780, and C782 print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and
  • Lexmark MX511 | Card Stock & Label Guide - Page 54
    cleaner upgrade kit (P/N 40X1856). Contact your local service representative for ordering information. When printing on labels: • From the printer control panel, technology" on page 11 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 Lexmark C792e, C792de, C792dte, and C792dhe
  • Lexmark MX511 | Card Stock & Label Guide - Page 55
    quantities of labels or other glossy print media, then install a dry web cleaner upgrade kit (P/N 40X1856). Contact your local service representative for ordering information. When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. For vinyl and other
  • Lexmark MX511 | Card Stock & Label Guide - Page 56
    technology" on page 11 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 Lexmark C910 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C910 supports stocks up to 163 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 57
    Printer specifications 57 Media specifications Labels Card stock Width: 210-216 mm (8.3-8.5 in.) Length: 279-297 mm (11-11.7 in.) Weight: 120-180 g/m2 (32- 43
  • Lexmark MX511 | Card Stock & Label Guide - Page 58
    printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C912 supports stocks up to 216 g/m2. The following table lists the maximum weights supported by the standard tray and the multipurpose feeder. Overview of
  • Lexmark MX511 | Card Stock & Label Guide - Page 59
    ) to Heavy. • Download the vinyl file, vinyl8ppm.npa, from our FTP site and send it to the printer (copy the file to the printer port). When printing on in the Paper Menu. Lexmark C920 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend
  • Lexmark MX511 | Card Stock & Label Guide - Page 60
    Printer specifications 60 The Lexmark C920 supports stocks up to 216 g/m2. The following table lists the maximum weights supported by the standard tray and the multipurpose feeder. Overview of card stock and label support Paper source Standard tray Multipurpose feeder Card stock Index Bristol -
  • Lexmark MX511 | Card Stock & Label Guide - Page 61
    specifications 61 Lexmark C925 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The trays and the multipurpose feeder support card stock. The multipurpose feeder supports card stocks
  • Lexmark MX511 | Card Stock & Label Guide - Page 62
    It may cause paper jams. • We recommend the use of grain long card stock. Lexmark C935 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to 220 g/m2.
  • Lexmark MX511 | Card Stock & Label Guide - Page 63
    Printer specifications 63 The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Labels Tray 1 Not applicable Card stock 105 g/m2 Trays 2 and 3 Not applicable 220 g/m2 Multipurpose feeder 220 g/m2 220 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 64
    use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C950 supports card stock up to 300 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock
  • Lexmark MX511 | Card Stock & Label Guide - Page 65
    vinyl or polyester labels. The Lexmark CS310n, CS310dn, CS410n, CS410dn, and CS510de printer models support card stock weights up to 176 g/m2. Card stock and labels are supported from the 250‑sheet tray, 550‑sheet tray, 650‑sheet duo tray, the manual feeder, and the multipurpose feeder. The 250
  • Lexmark MX511 | Card Stock & Label Guide - Page 66
    Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Up to 176 g/m2 Cover (65 lb) For more information on the supported media sizes, see the printer User's Guide on the Software and Documentation CD. Card stock and label guidelines When printing on labels: • Use only paper labels. Do not use vinyl
  • Lexmark MX511 | Card Stock & Label Guide - Page 67
    the same paper sizes and types. • The automatic document feeder (ADF) does not support card stock or labels. Limit label printing to occasional use of paper office labels designed for use with laser printers. The Lexmark CX310n, CX310dn, CX410e, CX410de, CX410dte, CX510de, CX510dhe, and CX510dthe
  • Lexmark MX511 | Card Stock & Label Guide - Page 68
    * grain long and manual feeder grain short 120 g/m2 163 g/m2 120 g/m2 163 g/m2 * The multipurpose feeder may not support labels with certain design 50-300 Sheffield* * 50-150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 Sheffield such as coated paper
  • Lexmark MX511 | Card Stock & Label Guide - Page 69
    E120 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E120 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following
  • Lexmark MX511 | Card Stock & Label Guide - Page 70
    card stock and labels. For more information, see "Maintenance procedures" on page 14. Lexmark E220 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E220 supports stocks up to 163 g/m2 (43 lb
  • Lexmark MX511 | Card Stock & Label Guide - Page 71
    , see "Maintenance procedures" on page 14. Lexmark E230, E232, E234(n), E330, and E332n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E230, E232, E234(n), E330, and E332n support paper and
  • Lexmark MX511 | Card Stock & Label Guide - Page 72
    . For more information, see "Maintenance procedures" on page 14. Lexmark E238, E240, E240n, E340, and E342n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports stocks up to 163 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 73
    labels. For more information, see "Maintenance procedures" on page 14. Lexmark E250, E350, and E450n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and label stock from 60
  • Lexmark MX511 | Card Stock & Label Guide - Page 74
    , see "Maintenance procedures" on page 14. Lexmark E260, E260d, E260dn, E360d, E360dn, E460dn, E460dw, and E462dtn Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and
  • Lexmark MX511 | Card Stock & Label Guide - Page 75
    labels. For more information, see "Maintenance procedures" on page 14. Lexmark E320, E322 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E320 and Lexmark E322 support stocks up to 163 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 76
    labels. For more information, see "Maintenance procedures" on page 14. Lexmark E321, E323 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E321 and Lexmark E323 support stocks up to 163 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 77
    card stock and labels. For more information, see "Maintenance procedures" on page 14. Lexmark MS310d, MS310dn, MS410d, MS410dn, MS510dn, MS610dn, designed for laser printers. The Lexmark MS310d, MS310dn, MS410d, MS410dn, MS510dn, MS610dn, and MS610de printer models do not support vinyl, pharmacy
  • Lexmark MX511 | Card Stock & Label Guide - Page 78
    For the MS51x and MS61x printer models, you can load paper manual feeders. Overview of card stock and label support Paper source Standard tray Optional 250‑sheet tray Optional 550‑sheet tray Manual is recommended. Adhesive material contaminates the printer and could void the warranty. • If zone
  • Lexmark MX511 | Card Stock & Label Guide - Page 79
    For more information, see "Maintenance procedures" on page 14. Lexmark MS710 and MS711 The Lexmark MS710 and MS711 printer models print on many labels, which includes vinyl and polyester, designed for use with laser printers. The following table lists the maximum weights supported by the trays and
  • Lexmark MX511 | Card Stock & Label Guide - Page 80
    printers. A special fuser cleaner should be used for label applications to optimize feed reliability. Printing labels on the Lexmark MS710 and MS711 requires a special label fuser special fuser wiper. The wax wiper that is used with the Lexmark MS710 and MS711 is P/N 40X8581. Cartridges designed for
  • Lexmark MX511 | Card Stock & Label Guide - Page 81
    problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge " on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 • "
  • Lexmark MX511 | Card Stock & Label Guide - Page 82
    . If either of these applications are being considered for the MS81x printer models, then contact your Lexmark sales representative for more information about the MS71x printer models. The following table lists the maximum weights supported by the trays and the multipurpose feeder: Overview of card
  • Lexmark MX511 | Card Stock & Label Guide - Page 83
    Printer to the alternate paper fill indicator. When printing on labels: • From the printer control panel, set the paper size, type, texture, and weight in the in the same paper tray. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to
  • Lexmark MX511 | Card Stock & Label Guide - Page 84
    printer Maintenance procedures" on page 14 • "Troubleshooting" on page 14 • "Primary rib pattern design guidelines for reference edge alignment" on page 22 Lexmark printers. The Lexmark MX310dn, MX410de, MX510de, MX511de, MX511dhe, MX610de, MX611de, and MX611dhe printer models do not support printer
  • Lexmark MX511 | Card Stock & Label Guide - Page 85
    Printer specifications 85 Overview of card stock and label support Paper source Standard tray Optional 250‑sheet tray Optional 550‑sheet tray Manual mm (0.06 in.) strip on the leading and driver edge, and use a non‑oozing adhesive. • Portrait jams or other paper handling problems. • Check with the
  • Lexmark MX511 | Card Stock & Label Guide - Page 86
    with chemicals that may contaminate the printer. • Use grain short card stock when possible. For more information, see "Maintenance procedures" on page 14. Lexmark MX710, MX711, MX810, MX811, and MX812 The Lexmark MX710, MX711, MX810, MX811, and MX812 printer models print on many labels designed
  • Lexmark MX511 | Card Stock & Label Guide - Page 87
    Printer specifications 87 Overview of card stock and label support Card stock1 Labels Paper source Index Bristol Tag Cover Paper Dual‑web paper Standard and optional 250‑ and 550‑sheet trays 199 g/m2 203 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 88
    problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge " on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 • "
  • Lexmark MX511 | Card Stock & Label Guide - Page 89
    prints on many labels designed for use with laser printers. The Lexmark T420 supports stocks up to 60‑199 g/m2 (16-53 lb). The standard tray is designed to handle 100 sheets of heavy labels, but its capacity may
  • Lexmark MX511 | Card Stock & Label Guide - Page 90
    printing on labels: • Set the Paper Type to Labels from the printer driver, the Local Printer Setup Utility, or MarkVision. • Do not load labels together with sheets will also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties. • Use labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 91
    91 For more information, see "Maintenance procedures" on page 14. Lexmark T430 The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We do not recommend using vinyl or polyester labels. The Lexmark T430 supports stocks from 60-163 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 92
    printing on labels: • Set the Paper Type to Labels from the printer driver, the Local Printer Setup Utility, or MarkVision. • Do not load labels together with sheets will also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • Use labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 93
    top edge going in first. For more information, see "Maintenance procedures" on page 14. Lexmark T520, T522 The Lexmark T520 and T522 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print
  • Lexmark MX511 | Card Stock & Label Guide - Page 94
    , see the printer publications CD. The following table indicates the paper sizes each tray supports. Paper Source and special media trays The Lexmark T520 and T522 paper feeding mechanism uses advanced technology that enhances feeding reliability. The standard Lexmark T520 and T522 tray, which
  • Lexmark MX511 | Card Stock & Label Guide - Page 95
    problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge " on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14
  • Lexmark MX511 | Card Stock & Label Guide - Page 96
    g/m2 (20-36 lb bond) 1 See "Grain orientation" on page 17 for specific recommendations. 2 The Lexmark T622 does not support vinyl labels. 3 Pressure‑sensitive area must enter the printer first for grain short paper. 4 Due to label design characteristics, unacceptable feeding may be experienced from
  • Lexmark MX511 | Card Stock & Label Guide - Page 97
    Printer specifications 97 For paper and transparency specifications, see the publications CD. The following table indicates the paper sizes each tray supports forms, Lexmark offers a variety of special media trays and drawers. Note: Optional 250‑sheet Universally Adjustable Trays support forms with
  • Lexmark MX511 | Card Stock & Label Guide - Page 98
    can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. Note: The Lexmark T622 does not support vinyl labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 99
    99 Lexmark T630, T632, T634 The Lexmark T630, T632, and T634 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print
  • Lexmark MX511 | Card Stock & Label Guide - Page 100
    Printer specifications 100 The following table indicates the paper sizes each tray supports. Paper source specifications for all media For those difficult‑to‑print sizes, such as 3 x 5‑inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 250‑sheet
  • Lexmark MX511 | Card Stock & Label Guide - Page 101
    problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge " on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14
  • Lexmark MX511 | Card Stock & Label Guide - Page 102
    specifications 102 Lexmark T640, T642, T644 The Lexmark T640, T642, and T644 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Card stock Labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 103
    than 7 inches long are not supported from a 400‑sheet universally adjustable cartridge, be sure to order the cartridge that will include the correct fuser cleaner. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark
  • Lexmark MX511 | Card Stock & Label Guide - Page 104
    " on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 Lexmark T650, T652, T654, and T656dne The Lexmark T650, T652, T654, and T656dne print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the
  • Lexmark MX511 | Card Stock & Label Guide - Page 105
    Printer For difficult‑to‑print sizes, such as 3 x 5‑inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 200‑ ‑sheet integral tray. Forms less than seven inches long are not supported from a 400‑sheet universally adjustable tray. Standard and special trays
  • Lexmark MX511 | Card Stock & Label Guide - Page 106
    . Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When feeding labels, the
  • Lexmark MX511 | Card Stock & Label Guide - Page 107
    • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 Lexmark W812 The Lexmark W812 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support
  • Lexmark MX511 | Card Stock & Label Guide - Page 108
    163 g/m2 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W820 supports stocks up to 163 g/m2. Always feed labels and card stock from Tray 1, 2, or 3, each of which can hold
  • Lexmark MX511 | Card Stock & Label Guide - Page 109
    W840 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W840 supports stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2, or the multipurpose feeder. The
  • Lexmark MX511 | Card Stock & Label Guide - Page 110
    also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver
  • Lexmark MX511 | Card Stock & Label Guide - Page 111
    the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark W850 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W850 supports
  • Lexmark MX511 | Card Stock & Label Guide - Page 112
    also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver
  • Lexmark MX511 | Card Stock & Label Guide - Page 113
    results, feed labels from the paper tray. The Lexmark X203n and X204n printer models support stocks up to 90 g/m2 (24 lb). Note: The smallest supported Universal size is 76 x 127 mm (3 x the paper tray or manual feeder. Do not use labels in the ADF. • Do not use labels with slick backing material.
  • Lexmark MX511 | Card Stock & Label Guide - Page 114
    printer and the cartridge with adhesive, and could void the printer and cartridge the leading and driver edge, and use problems Maintenance procedures" on page 14. Lexmark X215 The Lexmark X215 prints on paper office labels designed for use with laser printers. Labels can be fed only from the manual
  • Lexmark MX511 | Card Stock & Label Guide - Page 115
    support Paper source Index Bristol Manual bypass feeder* Up to 163 g/m2 (90 lb) * Card stock can be fed only from the manual bypass feeder. Card stock Tag Up to 163 g/m2 (100 lb) For paper and transparency specifications, see the Lexmark X215 User's Guide Labels from the printer driver. • Use
  • Lexmark MX511 | Card Stock & Label Guide - Page 116
    labels. It is recommended to print no more than 20 pages of paper labels a month. The printer and duplex path support paper and label stock from 60-90 g/m2 (16‑24 lb). The multipurpose and manual feeders support card stock up to 163 g/m2 (43 lb). You can load up to 50 label sheets
  • Lexmark MX511 | Card Stock & Label Guide - Page 117
    Printer specifications 117 Overview of card stock and label support Paper source Standard tray Index Bristol - Card Stock Tag - Optional 250‑sheet tray - Optional 550‑sheet tray Manual 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non‑oozing adhesive. • Portrait
  • Lexmark MX511 | Card Stock & Label Guide - Page 118
    Maintenance procedures" on page 14. Lexmark X422 The Lexmark X422 prints on many labels designed for use with laser printers. Card stock is supported from the multipurpose feeder, and labels are supported Set the Paper Type to Labels from the printer driver. • Use standard‑size products (either A4
  • Lexmark MX511 | Card Stock & Label Guide - Page 119
    printer and your cartridge with adhesive, and could void your printer and cartridge should be removed on the leading and driver edge, and a non‑oozing adhesive Lexmark X463de, X464de, X466dte, and X466dtwe Limit label printing to occasional use of paper office labels designed for laser printers
  • Lexmark MX511 | Card Stock & Label Guide - Page 120
    in the multipurpose feeder. The following table lists the maximum weights supported by the standard tray, optional 250‑ and 550‑sheet trays, and multipurpose and manual feeders. Overview of card stock and label support Paper source Standard tray Index Bristol - Card Stock Tag - Optional 250
  • Lexmark MX511 | Card Stock & Label Guide - Page 121
    or other paper handling problems. • Check with Maintenance procedures" on page 14. Lexmark X500 and X502n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark X500 and X502n do not support vinyl or polyester labels. The Lexmark X500 and X502n support
  • Lexmark MX511 | Card Stock & Label Guide - Page 122
    Index Bristol (90 lb) 163 g/m2 Tag (100 lb) Weight: Up to 210 g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD. Lexmark X543, X544, and X546dtn Limit label printing to occasional use of paper office labels designed for use with laser
  • Lexmark MX511 | Card Stock & Label Guide - Page 123
    can cause feeding problems. • Use only letter-, A4-, or legal-size full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When printing
  • Lexmark MX511 | Card Stock & Label Guide - Page 124
    printers. Lexmark X548 does not support vinyl or polyester labels. Note: Printing large quantities of labels is not recommended. Overview of card stock and label support long and manual slot grain short 120 g/m2 163 g/m2 120 g/m2 163 g/m2 * The multipurpose feeder may not support labels with
  • Lexmark MX511 | Card Stock & Label Guide - Page 125
    void the printer and toner cartridge warranties. When printing on card stock: • From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the card stock loaded in the tray. • Do not use creased card stock to avoid jams. Lexmark X560 The Lexmark X560
  • Lexmark MX511 | Card Stock & Label Guide - Page 126
    cause feeding problems. • Use only letter-, A4-, and legal-size label sheets. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. • Do
  • Lexmark MX511 | Card Stock & Label Guide - Page 127
    X642e The Lexmark X642e prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card stock
  • Lexmark MX511 | Card Stock & Label Guide - Page 128
    . Forms less than 7 inches are not supported from a 400‑sheet universally adjustable tray. Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must install a special fuser wiper. The wax wiper that is used with the X642e is P/N 40X2666 (Cartridges
  • Lexmark MX511 | Card Stock & Label Guide - Page 129
    • "Grain orientation" on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 Lexmark X644e, X646e The Lexmark X644e and X646e print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose
  • Lexmark MX511 | Card Stock & Label Guide - Page 130
    Printer specifications 130 Overview of card stock and label support Card stock Labels Grain Paper source page 9. For those difficult‑to‑print sizes, such as 3 x 5‑inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 250‑sheet Universally Adjustable Trays
  • Lexmark MX511 | Card Stock & Label Guide - Page 131
    problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge " on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14
  • Lexmark MX511 | Card Stock & Label Guide - Page 132
    X656de, and X658de The Lexmark X651de, X652de, X654de, X656de, and X658de print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning labels through the ADF is not recommended. Overview
  • Lexmark MX511 | Card Stock & Label Guide - Page 133
    Printer specifications 133 Card stock Weight: Up to 199 g/m2 Index Bristol (90 lb) Up to 203 g/m2 Tag (100 lb) Up to 216 g/m2 Cover (80 lb) Standard trays and special trays The Lexmark less than seven inches in length are not supported from a 400‑sheet universally adjustable tray. Standard
  • Lexmark MX511 | Card Stock & Label Guide - Page 134
    To duplex labels, consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label. You must install a special fuser wiper. The wax wiper that is used with the X651de, X652de, X654de, and X656de printers is P/N 40X2666 (cartridges designed for duplex label
  • Lexmark MX511 | Card Stock & Label Guide - Page 135
    X736, and X738 Lexmark X734, X736, and X738 printer models support card stock and labels from the standard 550‑sheet tray, an optional 550‑sheet tray, the multipurpose tray, and the optional 550‑sheet specialty media drawer. Note: The optional 2,000‑sheet tray does not support card stock or labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 136
    * 50-150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 lb) For more information on the supported media sizes, see the printer User's Guide on the publications CD. Card stock with chemicals that may contaminate the printer. • Be aware that preprinting,
  • Lexmark MX511 | Card Stock & Label Guide - Page 137
    137 For more information, see "Pick roller technology" on page 11. Lexmark X746 and X748 The Lexmark X746 and X748 printer models support card stock and labels from the standard 550‑sheet tray, an optional 550‑sheet tray, the multipurpose feeder, and the optional 550‑sheet specialty
  • Lexmark MX511 | Card Stock & Label Guide - Page 138
    Bristol (110 lb) Up to 203 g/m2 Tag (125 lb) Up to 216 g/m2 Cover (80 lb) For more information on the supported media sizes, see the printer User's Guide on the Software and Documentation CD. Card stock and label guidelines When printing on labels: • Print samples on the labels being considered
  • Lexmark MX511 | Card Stock & Label Guide - Page 139
    and cause jams or other paper‑handling problems. For more information, see "Pick roller technology" on page 11. Lexmark X782 The Lexmark X782 can print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose
  • Lexmark MX511 | Card Stock & Label Guide - Page 140
    of the image is critical. For paper and transparency specifications, see the printer User's Guide on the publications CD. Media specifications Labels Thickness: 0.102-0.305 mm (0.004-0.012 in.) Smoothness: 50-300* Sheffield * 50-150 Sheffield is optimal. This printer may support labels with
  • Lexmark MX511 | Card Stock & Label Guide - Page 141
    X792de, X792dte, X792dtfe, X792dtpe, X792dtme, and X792dtse The Lexmark X792de, X792dte, X792dtfe, X792dtpe, X792dtme, and X792dtse printer models support card stock and labels from the standard 550‑sheet tray, an optional 550‑sheet tray, and the multipurpose feeder. Note: The optional 2000‑sheet
  • Lexmark MX511 | Card Stock & Label Guide - Page 142
    the image is critical. Media specifications Labels Card stock Width: 76.2-139.7 mm (3-8.5 in.) Length: 127-355.6 mm (5-14 in.) Weight: 160-220 g/m2 160-300 g/m2 (Vinyl) Thickness: Up to 0.25 mm Smoothness: 50-300 Sheffield* * 50-150 Sheffield is optimal. This printer may support labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 143
    inch) strip should be removed on the leading and driver edge, and a non‑oozing adhesive should be used printer first. Lexmark X850, X852e, and X854e Limit label printing to occasional use of paper office labels designed for laser printers. Paper labels are supported in Tray 1, Tray 2, and the manual
  • Lexmark MX511 | Card Stock & Label Guide - Page 144
    Printer specifications 144 Overview of card stock and label support printing on labels: • Set the Paper Type to Labels from the printer driver. • Use standard‑size products (either A4 or Letter). • Do your printer and your cartridge with adhesive, and could void your printer and cartridge warranties
  • Lexmark MX511 | Card Stock & Label Guide - Page 145
    manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver laser printers. We do not recommend using vinyl or polyester labels. The Lexmark X860e, X862e, and X864e support stocks
  • Lexmark MX511 | Card Stock & Label Guide - Page 146
    also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver
  • Lexmark MX511 | Card Stock & Label Guide - Page 147
    card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark X925 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester
  • Lexmark MX511 | Card Stock & Label Guide - Page 148
    Printer specifications 148 Overview of label support Paper source Standard 150‑sheet tray in.) Weight: Up to 216 g/m2 Card stock and label guidelines When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick
  • Lexmark MX511 | Card Stock & Label Guide - Page 149
    X945 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X940 and X945 support stocks up to 220 g/m2. Always feed labels and card stock from Tray 1, 2, or 3. We recommend printing
  • Lexmark MX511 | Card Stock & Label Guide - Page 150
    use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X950 supports card stock up to 300 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock
  • Lexmark MX511 | Card Stock & Label Guide - Page 151
    Printer on labels: • From the printer control panel, set the paper printer and the cartridge with adhesive, and could void the printer and toner cartridge warranties. When printing on card stock: • From the printer printers The following table lists the maximum weights supported by each of the special
  • Lexmark MX511 | Card Stock & Label Guide - Page 152
    g/m2 300 g/m2 For paper and transparency specifications, see your printer User's Guide. As the following table indicates, the paper tray capacities vary depending print registration and skew may be unpredictable. Card stock and labels supported (11‑inch card stock and label trays) Media Paper/card
  • Lexmark MX511 | Card Stock & Label Guide - Page 153
    g/m2 Lower: All supported media Upper: 120-150 g/m2 Lower: 140-180 g/m2 Upper: 260-265 g/m2 Lower: 260-300 g/m2 1 You can manually feed card stock with supported media 1 Select the appropriate tray according to the part of the form (pressure‑sensitive area or paper base) that enters the printer
  • Lexmark MX511 | Card Stock & Label Guide - Page 154
    FineTM toner cartridges (P/N 1382100 or 1382150) when duplexing. • Note that 4039 print cartridges are not recommended for general use in Optra printers, since they cannot provide the 1200 dpi quality desirable for graphics and gray scaling. Using third party, non‑Lexmark cartridges and fuser
  • Lexmark MX511 | Card Stock & Label Guide - Page 155
    Optra C We do not recommend using card stock or labels with this printer. Card stock and labels are not supported from any of the paper trays. For paper and transparency specifications, see the printer User's Guide. Optra C710 Limit label printing to occasional use of paper office labels designed
  • Lexmark MX511 | Card Stock & Label Guide - Page 156
    Printer specifications 156 Media specifications Labels Card stock Width: 210-216 mm (8.3-8.5 in.) Length: 279-297 mm (11-11.7 in.) Weight: 120-163 g/m2 (32-43
  • Lexmark MX511 | Card Stock & Label Guide - Page 157
    by the multipurpose feeder. Overview of card stock and label support Paper source Multipurpose feeder Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 135 g/m2 Vinyl - Media specifications Labels
  • Lexmark MX511 | Card Stock & Label Guide - Page 158
    manual feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 163 g/m2 163 g/m2 Card stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide For more information, see "Maintenance procedures" on page 14.
  • Lexmark MX511 | Card Stock & Label Guide - Page 159
    support Paper Source Automatic Paper Feeder Manual Sheet Feeder Card Stock Index Bristol Tag 163 g/m2 163 g/m2 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide when printing on labels. For more information, see "Maintenance procedures" on page 14.
  • Lexmark MX511 | Card Stock & Label Guide - Page 160
    feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 199 g/m2 199 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover 176 g/m2 176 g/m2 For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 180 g/m2 300 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 161
    We do not recommend using vinyl or polyester labels or any card stock with the Optra K 1220 printer. Always feed labels from the manual feed tray or the optional multipurpose feeder. The multipurpose feeder can hold up to 30 sheets of labels. The following table lists the maximum weights supported.
  • Lexmark MX511 | Card Stock & Label Guide - Page 162
    specifications 162 Overview of card stock and label support Paper source Multipurpose feeder Card stock Index Bristol Tag - - Manual feed tray - - For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Width: Length: Weight: 210-216
  • Lexmark MX511 | Card Stock & Label Guide - Page 163
    support card stock and label printing. You can try occasional label printing from Tray 1, but we recommend you use the multipurpose feeder. For paper and transparency specifications, see the printer User's Guide printer and your cartridge with adhesive, and could void your printer and cartridge
  • Lexmark MX511 | Card Stock & Label Guide - Page 164
    leading and driver edge, and printer. • We recommend the use of grain short card stock. For more information, see "Maintenance supports print materials up to 128 g/m2 (34 lb). The following table lists the maximum weights supported by the multipurpose tray. Overview of card stock and label support
  • Lexmark MX511 | Card Stock & Label Guide - Page 165
    For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Width: 210-216 table lists the maximum weights supported by each of the printer trays. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and
  • Lexmark MX511 | Card Stock & Label Guide - Page 166
    enter the printer first for grain short paper. For paper and transparency specifications, see the printer User's Guide. Media Tag (100 lb) The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal
  • Lexmark MX511 | Card Stock & Label Guide - Page 167
    print sizes, such as 3 x 5‑inch index cards, Lexmark offers a variety of special media tray and drawer options. printer supports, except for transparencies and envelopes. Duplexing of specially designed labels is supported in the Optra S1855 printer. You may notice skew or print registration problems
  • Lexmark MX511 | Card Stock & Label Guide - Page 168
    are needed. Print cartridge with label fuser cleaner Print cartridge part number 1382929 PrebateTM (cartridge for special label machine use) For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14
  • Lexmark MX511 | Card Stock & Label Guide - Page 169
    169 For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Width: 210-216 mm prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material
  • Lexmark MX511 | Card Stock & Label Guide - Page 170
    first for grain short paper. For paper and transparency specifications, see the printer User's Guide. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal sizes (width x length) Source Standard
  • Lexmark MX511 | Card Stock & Label Guide - Page 171
    Optional 250‑sheet Universally Adjustable Trays designed for the Lexmark T printer family support forms with a minimum length of 5 inches when installed special oil fuser cleaner, P/N 99A0725. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner.
  • Lexmark MX511 | Card Stock & Label Guide - Page 172
    " on page 17 • "Maintenance procedures" on page 14 • "Troubleshooting" on page 14 Optra W810 Limit label printing to occasional use of A4‑ or letter‑size paper labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra W810 supports stocks up to 163 g/m2
  • Lexmark MX511 | Card Stock & Label Guide - Page 173
    1 mm (0.040 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • Set the Paper the same as Plain Paper. It does not adjust the print speed or fuser temperature when the Paper Type is set to Card Stock. • Do not use
  • Lexmark MX511 | Card Stock & Label Guide - Page 174
    toner buildup in the fuser. Weight in pounds of a specific number of sheets of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support inks helps the printer separate one of pressing an image down into the
  • Lexmark MX511 | Card Stock & Label Guide - Page 175
    the hardware reference and that is driven by the rollers in the printer. For most Lexmark printers, the driver edge is the left edge of a portrait page. Process of raising the surface of the base material by stamping an image or design with an embossing machine. The machine has a roll with a raised
  • Lexmark MX511 | Card Stock & Label Guide - Page 176
    Toner Total strip matrix 176 The mechanical action the printer problems in the printer. Smoothness is measured in Sheffield points; lower values indicate smoother paper. The appearance of black specks around a printed image A printing process that raises the ink image or design above the surface of
  • Lexmark MX511 | Card Stock & Label Guide - Page 177
    Zone coating 177 A finish with a rough surface similar to eggshell and antique finishes. A vellum finish is relatively absorbent, providing good ink penetration. Waviness in the stock that gives a rippled appearance to the material; generally moisture related. Placing adhesive in selected areas
  • Lexmark MX511 | Card Stock & Label Guide - Page 178
    S sizing 29 smoothness 24 stacking in output bin 31 stripped edge matrix 23, 25 supercalendering 24 supported laser printers 7 T technical assistance 7, 9 temperature 9 testing print material 8 thermography inks 10 toner rubs off 14 topcoats 25 troubleshooting 14 V vinyl labels 25 volume printing 8
  • Lexmark MX511 | Card Stock & Label Guide - Page 179
    Index 179 W weight, basis 9 weights, card stock comparison 17 Z zone coating adhesives 25 integrated forms 31 labels 26
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
Card Stock & Label Guide
Laser Printers
October 2012
www.lexmark.com