Lexmark MX718 FTP Guide
Lexmark MX718 Manual
View all Lexmark MX718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark MX718 manual content summary:
- Lexmark MX718 | FTP Guide - Page 1
• The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the printer control panel, press # on the keypad, and then enter the FTP shortcut number. 4 Touch > Send It. Scanning an FTP using the address - Lexmark MX718 | FTP Guide - Page 2
FTP Guide Page 2 of 3 Understanding the FTP options FTP This option lets you enter the IP address for the FTP destination. Note: An IP address appears as - Lexmark MX718 | FTP Guide - Page 3
FTP Guide Page 3 of 3 Select one of the following: • PDF-Use to create a single file with multiple pages. The PDF can be sent as a secured detects when the ADF picks more than one sheet of paper at a time, and then shows an error message. Note: This option is supported only in select printer models.
FTP Guide
Note:
You can scan to only one FTP address at a time.
Scanning to an FTP address using the printer control panel
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, navigate to:
FTP
>
FTP
> type the FTP address >
Done
>
Send It
Scanning to an FTP address using a shortcut number
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the printer control panel, press
#
on the keypad, and then enter the FTP shortcut number.
4
Touch
>
Send It
.
Scanning an FTP using the address book
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
FTP
>
FTP
>
> type the name of the recipient >
Search
4
Touch the name of the recipient.
Note:
To search for additional recipients, touch
New Search
, and then type the name of the next recipient.
5
Touch
>
Send It
.
FTP Guide
Page 1 of 3