Lexmark Monochrome Laser Maintenance Guide

Lexmark Monochrome Laser Manual

Get Lexmark Monochrome Laser PDF manuals and user guides View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark Monochrome Laser manual content summary:

  • Lexmark Monochrome Laser | Maintenance Guide - Page 1
    Lexmark E360d and E360dn Series Maintenance Guide January 2010 www.lexmark.com
  • Lexmark Monochrome Laser | Maintenance Guide - Page 2
    3 Ordering supplies...4 Ordering toner cartridges ...4 Ordering a photoconductor kit ...5 Replacing supplies...5 Replacing the toner cartridge ...5 Replacing the photoconductor kit ...6 Moving the printer...9 Before moving the printer ...9 Moving the printer to another location...9 Shipping the
  • Lexmark Monochrome Laser | Maintenance Guide - Page 3
    : To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. 2 Remove all paper from the printer. 3 Dampen a clean, lint‑free cloth with water. Warning-Potential Damage: Do not
  • Lexmark Monochrome Laser | Maintenance Guide - Page 4
    . In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer. Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper. Ordering toner cartridges When 88 Cartridge is Low appears or when the
  • Lexmark Monochrome Laser | Maintenance Guide - Page 5
    : You can check to see approximately how much toner is left in your cartridge by printing a menu settings page. To replace the toner cartridge: 1 Open the front door by pressing the button on the left side of the printer and lowering the door. 2 Press the button on the base of the photoconductor
  • Lexmark Monochrome Laser | Maintenance Guide - Page 6
    problems. 4 Rotate the cartridge in all directions to distribute the toner. 5 Install the new toner cartridge by aligning the rollers on the toner cartridge you should immediately order a new photoconductor kit. While the printer may continue to function properly after the photoconductor kit has
  • Lexmark Monochrome Laser | Maintenance Guide - Page 7
    by pressing the button on the left side of the printer and lowering the front door. 3 Pull the photoconductor kit and toner cartridge out of the printer as a unit by pulling on the toner cartridge handle. Note: The photoconductor kit and toner cartridge form a unit. Place the unit on a flat, clean
  • Lexmark Monochrome Laser | Maintenance Guide - Page 8
    into the photoconductor kit by aligning the rollers on the toner cartridge with the tracks. Push the toner cartridge until it clicks into place. 7 Install the unit into the printer by aligning the arrows on the guides of the unit with the arrows in the printer. Push the unit as far as it will go
  • Lexmark Monochrome Laser | Maintenance Guide - Page 9
    Any cart used to move the options must have a surface able to support the dimensions of the options. • Keep the printer in an upright position. • Avoid severe jarring movements. Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for a relocation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
Lexmark E360d and E360dn Series
Maintenance Guide
January 2010
www.lexmark.com