Lexmark Optra C Card Stock & Label Guide

Lexmark Optra C Manual

Get Lexmark Optra C PDF manuals and user guides View all Lexmark Optra C manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark Optra C manual content summary:

  • Lexmark Optra C | Card Stock & Label Guide - Page 1
    Card Stock & Label Guide Laser Printers January 2011 www.lexmark.com
  • Lexmark Optra C | Card Stock & Label Guide - Page 2
    and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www
  • Lexmark Optra C | Card Stock & Label Guide - Page 3
    paper labels...19 Label components...21 Label design guidelines...23 Printer specifications 30 Lexmark C500n...30 Lexmark C510...31 Lexmark C520, C522, and C524...32 Lexmark C530, C532, and C534...34 Lexmark C540, C543, C544, and C546dtn 36 Lexmark C720...38 Lexmark C734 and C736...40 Contents 3
  • Lexmark Optra C | Card Stock & Label Guide - Page 4
    Lexmark C750...42 Lexmark C752...44 Lexmark C760 and C762...46 Lexmark C770, C772, C780, and C782...49 Lexmark C790...50 Lexmark C910...52 Lexmark C912...53 Lexmark C920...55 Lexmark C925...56 Lexmark C935...58 Lexmark E120...59 Lexmark E220...61 Lexmark E230, E232, E234(n), E330, and E332n 62
  • Lexmark Optra C | Card Stock & Label Guide - Page 5
    124 Lexmark X940 and X945...126 Optra plus, 4039, 4029, 4019, WinWriter 600 printers 127 Optra C...130 Optra C710...131 Optra Color 1200...133 Optra E, Ep...134 Optra E310, E312...135 Optra Es special media printer...136 Optra K 1220...137 Optra M410, M412...138 Optra N...140 Optra S...141 Optra SC
  • Lexmark Optra C | Card Stock & Label Guide - Page 6
    6
  • Lexmark Optra C | Card Stock & Label Guide - Page 7
    print materials for the following Lexmark laser printers. Model series 4019 models 4029 models 4039 10 plus 4039 12C C series E series OptraTM models Models All All All All C500, C510, C520, C522, C524, C530, C532, C534, C540, C546dtn, C543, C544, C720, C734, C736, C750, C752, C760, C762, C770
  • Lexmark Optra C | Card Stock & Label Guide - Page 8
    problem you have with an existing application. In addition, Lexmark has worked with several suppliers and has business partners in this field. For technical assistance contact numbers, see the printer registration card, information on the printer CD, or visit the Lexmark Web site at support.lexmark
  • Lexmark Optra C | Card Stock & Label Guide - Page 9
    use forms that are shorter than the minimum length supported by your printer, you may be able to link two forms together when printing multiple forms. An optional Universally Adjustable Tray designed for the Optra S, Optra T, and Lexmark T printer families prints on a range of paper sizes including
  • Lexmark Optra C | Card Stock & Label Guide - Page 10
    components to the high temperatures and pressure used in the laser printing process. Preprinted inks and colorations must withstand a fuser temperature up to 225°C (437°F) and pressure up to 25 psi without contaminating the printer or creating hazardous fumes. Thermography inks are not recommended
  • Lexmark Optra C | Card Stock & Label Guide - Page 11
    service does Lexmark specifications • use of non-Lexmark supplies (such as toner cartridges and/or inkjet cartridges) • use of non-Lexmark product or component Pick roller technology Some printers printers with a corner buckler system.) You may want to use micro-perfs to avoid nesting problems
  • Lexmark Optra C | Card Stock & Label Guide - Page 12
    For the following printers, make sure perforations fall outside the 0.3-0.79-inch area on the leading edge of the media: Optra S, Optra T, T520, T522, T620, T622, T630, T632, T634, T640, T642, T644, T650, T652, T654, T656dne, X203, X204, X264, X363, X364, X463, X464, X466, X543, X544, X546dtn,
  • Lexmark Optra C | Card Stock & Label Guide - Page 13
    cleaning process every time you replace the black cartridge, more often with some media. Failure to follow maintenance procedures for your printer could cause jamming, poor print quality, feeding problems, and fuser problems. Troubleshooting The following table provides solutions for some common
  • Lexmark Optra C | Card Stock & Label Guide - Page 14
    Solutions to printing problems Problem Solution Print on heavy stock is blurred or out of focus. Toner rubs off the page. approximately five seconds, and then print five more sheets of paper to remove any toner that may have accumulated. Printing shows voids. Change the Paper Type to Plain
  • Lexmark Optra C | Card Stock & Label Guide - Page 15
    withstand the high temperatures used in laser printing. Perforation and creasing may cause toner onto the paper properly, resulting in poor print quality. To determine if your printer is able to print on cover stock, locate your printer in the "Printer specifications" chapter and review the supported
  • Lexmark Optra C | Card Stock & Label Guide - Page 16
    first. For lighter card stocks, grain long is recommended to reduce potential curl problems. Curl may decrease the ability of the form to move reliably through the printer. Most printers feed paper short edge first. If your printer supports larger paper sizes, such as 11 x 17 in. or A3, it may feed
  • Lexmark Optra C | Card Stock & Label Guide - Page 17
    surfaces or surfaces that mimic laid finishes (glossy paper, not glossy card stock, is acceptable for some printers). Paper smoothness also affects print quality. If the paper is too rough, the toner does not fuse to the paper properly; if the paper is too smooth, it can affect feed reliability
  • Lexmark Optra C | Card Stock & Label Guide - Page 18
    Offset powders We do not recommend using offset powders or other foreign materials to speed drying. Offset powders are used by print shops to prevent printed pages from sticking together. Powder is usually sprayed on the printed page right before it reaches the stacker on the offset printing press.
  • Lexmark Optra C | Card Stock & Label Guide - Page 19
    other critical problems, such as labels peeling off and causing jams in the printer, or the label or adhesive melting if the sheet stops in the fuser during a paper jam. Review label designs with a converter or vendor who is knowledgeable about labels and laser printer characteristics to ensure
  • Lexmark Optra C | Card Stock & Label Guide - Page 20
    the label adhesive and the printer, thereby preventing any adhesive contamination in the printer. The following graphics show the rib locations for the Optra S, Optra T, and Lexmark T, respectively. Optra S rib locations (rib width = 2 mm): Optra T and Lexmark T rib locations (rib width = 2 mm
  • Lexmark Optra C | Card Stock & Label Guide - Page 21
    printer. When ordering a new cartridge, be sure to order the cartridge that includes the correct fuser laser printers printers use a corner buckler and which use an auto compensator. Note: If your printer is not listed here, contact your Lexmark representative to verify which method your printer
  • Lexmark Optra C | Card Stock & Label Guide - Page 22
    T420, W820, X422 • Optra 12L, 12R, Lxi, Lx, Rx • Optra R+, Rt+, Lx+, Lxi+ • Optra C, Optra Color 1200, Optra N • Optra M410, M412, W810 • C910, C912, C920 • Lexmark E230, E232, E234(n), E330, E332n, E260, E360, E460, C510, C520, C522, C524, C530, C532, C534, C540, C734, C736, C750, C752, C760, C762
  • Lexmark Optra C | Card Stock & Label Guide - Page 23
    printing problem is printer and cartridge contamination. The adhesives are semi-liquid and may contain volatile components. If the sheet jams in the fuser, the adhesive can melt, thereby contaminating parts of the printer or releasing fumes. To avoid exposing adhesive to the paper path guides, drive
  • Lexmark Optra C | Card Stock & Label Guide - Page 24
    driver edge Using cut sheet labels with adhesive applied to the edge of the sheet will contaminate your printer and your cartridge and could void your printer and cartridge design for Optra plus printers, 4039, 4029, and 4019, as well as the T610, T520, T620, and T630 laser printers. Note: The
  • Lexmark Optra C | Card Stock & Label Guide - Page 25
    Leading Edge 8.5 in. 215.9 mm Waste strip 0.25 in (6.35 mm) Non-print area 0.33 in. 8.38 mm 0.5 in. Top perforation 12.7 mm Waste strip Driver edge 11 in. 279.4 mm 0.06 in. 1.6 mm Perforation end Liner edge 0.33 in. 8.38 mm Non-print area 0.25 in. 6.35 mm Non-print
  • Lexmark Optra C | Card Stock & Label Guide - Page 26
    The following diagram shows a recommended label design for the T640 and T650 laser printers. Labels 26
  • Lexmark Optra C | Card Stock & Label Guide - Page 27
    Cut sheet paper labels • Generally, cut sheet paper labels work well with your printer. • Coating or sizing to make the paper liquid-resistant decreases toner adhesion and increases the risk of toner contaminating the fuser. At a minimum, paper labels should be equivalent in weight and rigidity to
  • Lexmark Optra C | Card Stock & Label Guide - Page 28
    • To help prevent material from slipping in the fuser, we recommend knurling, which roughens up the exposed printer, which will require printer servicing. For more information on recommended label designs, see "Label design guidelines" on page 23. • For Optra S, Optra T, and Lexmark T printers
  • Lexmark Optra C | Card Stock & Label Guide - Page 29
    the cartridge that will include the correct fuser cleaner. Integrated forms • To create integrated forms, the converter uses hot melt adhesives to apply the label adhesive and liner to a base material (generally paper). • Oil bleed, recognizable by a discolored face sheet, can be a problem with
  • Lexmark Optra C | Card Stock & Label Guide - Page 30
    laser printers. The Lexmark C500n does not support vinyl or polyester labels. The Lexmark C500n supports 90-210-g/m2 (24-55-lb) stock. Card stock and labels are supported from Tray 1 and Tray 2. Tray 1 supports on the supported media sizes, see the printer User's Guide on the publications CD
  • Lexmark Optra C | Card Stock & Label Guide - Page 31
    Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C510 does not support vinyl or polyester labels. The Lexmark C510 supports stocks up to 176 g/m2. Feed labels from the standard tray only, which holds up to 80 sheets of labels or up to 120 sheets
  • Lexmark Optra C | Card Stock & Label Guide - Page 32
    use of paper office labels designed for laser printers. The Lexmark C520, C522, and C524 do not support vinyl or polyester labels. The Lexmark C520, C522, and C524 support stocks up to 176 g/m2. Card stock is supported from Tray 1, Tray 2, the manual feed slot, and the multipurpose feeder. Labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 33
    m2 Tray 2 (optional tray) 120 g/m2 163 g/m2 Multipurpose feeder Manual feed slot 120 g/m2 163 g/m2 * Vinyl labels are not supported. Card stock Tag grain long grain short 120 g/m2 163 g/m2 m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD
  • Lexmark Optra C | Card Stock & Label Guide - Page 34
    , always set Paper Type to Card Stock. For more information, see "Pick roller technology" on page 11. Lexmark C530, C532, and C534 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C530, C532, and C534 do not support vinyl or polyester labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 35
    The Lexmark C530, C532, and C534 support stocks up to 176 g/m2. Card stock and labels are supported from Tray 1, Tray 2, the manual feed slot, and the multipurpose feeder. Tray 1 supports approximately 120 sheets of card stock, and Tray 2 supports approximately 250 sheets of card stock. The
  • Lexmark Optra C | Card Stock & Label Guide - Page 36
    labels Unacceptable labels • We recommend using Avery 5260. • From the printer control panel or from MarkVision Professional, set Paper Type to Labels. , see "Pick roller technology" on page 11. Lexmark C540, C543, C544, and C546dtn Notes: • Your printer may not have a 650-sheet duo drawer with
  • Lexmark Optra C | Card Stock & Label Guide - Page 37
    office labels designed for laser printers. The Lexmark C540, C543, C544, and C546dtn do not support vinyl or polyester labels. The Lexmark C540, C543, C544, and C546dtn support card stock weights up to 176 g/m2. Card stock and labels are supported from Tray 1, Tray 2, the manual feeder, and the
  • Lexmark Optra C | Card Stock & Label Guide - Page 38
    C720 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C720 does not support vinyl or polyester labels. The Lexmark C720 supports stocks up to 43 lb (163 g/m2). Feed labels from the standard tray only, which holds up to 80 sheets of labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 39
    Overview of card stock and label support Paper source Tray 1 (standard tray) Index Bristol 163 g/m2 Card stock Tag 163 g/m2 Cover - For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 163 g/m2 - Media specifications Labels Card stock Width: 105-
  • Lexmark Optra C | Card Stock & Label Guide - Page 40
    Lexmark C734 and C736 Lexmark C734 and C736 support support card stock or labels. Tray 1 supports approximately 120 sheets of card stock, and the optional 550-sheet tray supports approximately 250 sheets of card stock. The multipurpose feeder supports supported. Overview of card stock support support
  • Lexmark Optra C | Card Stock & Label Guide - Page 41
    * 50-150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 lb) For more information on the supported media sizes, see the printer User's Guide on the publications CD. Card stock with chemicals that may contaminate the printer. • Be aware that preprinting,
  • Lexmark Optra C | Card Stock & Label Guide - Page 42
    C750 The Lexmark C750 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. The Lexmark C750 paper feeding mechanism uses advanced technology that enhances feeding reliability. The Lexmark C750
  • Lexmark Optra C | Card Stock & Label Guide - Page 43
    label guidelines Labels are one of the most difficult print materials for laser printers. A fuser equipped with a web oiler may be required for label applications to optimize feed reliability. Contact your local service representative for ordering information. If you print large quantities of labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 44
    your printer. It could also void your printer and cartridge warranties. Troubleshooting" on page 13 Lexmark C752 The Lexmark C752 prints on many labels designed for use with laser printers. The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m2 paper, reliably feed all supported
  • Lexmark Optra C | Card Stock & Label Guide - Page 45
    must enter the printer first. For paper and transparency specifications, see the Lexmark C752 Publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications inch index cards), set the MP Feeder Size menu item to Universal. Printer specifications 45
  • Lexmark Optra C | Card Stock & Label Guide - Page 46
    for laser printers. A fuser equipped with a web oiler may be required for label applications to optimize feed reliability. Contact your local service representative " on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C760 and C762 Printer specifications 46
  • Lexmark Optra C | Card Stock & Label Guide - Page 47
    Lexmark C760 and C762 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2,000-sheet drawer supports paper only. Print material specifications Range or maximum weight
  • Lexmark Optra C | Card Stock & Label Guide - Page 48
    label guidelines Labels are one of the most difficult print materials for laser printers. A fuser equipped with a web oiler may be required for label applications to optimize feed reliability. Contact your local service representative for ordering information. If you print large quantities of labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 49
    , C772, C780, and C782 The Lexmark C770, C772, C780, and C782 print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview
  • Lexmark Optra C | Card Stock & Label Guide - Page 50
    following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C790 Lexmark C790 prints on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder
  • Lexmark Optra C | Card Stock & Label Guide - Page 51
    g/m2 Overview of label support Labels Paper source Paper laser printers. A fuser problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge
  • Lexmark Optra C | Card Stock & Label Guide - Page 52
    " on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C910 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C910 supports stocks up to 163 g/m2 (90 lb). The
  • Lexmark Optra C | Card Stock & Label Guide - Page 53
    set the Paper Type to Card Stock in the Paper Menu. Lexmark C912 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C912 supports stocks up to 216 g/m2. The following table lists the maximum
  • Lexmark Optra C | Card Stock & Label Guide - Page 54
    Overview of card stock and label support Paper source Standard tray Multipurpose feeder Card stock Index Bristol - . Weight: Up to 216 g/m2 For paper and transparency specifications, refer to the printer publications CD. Card stock and label guidelines When printing on labels: • Use only
  • Lexmark Optra C | Card Stock & Label Guide - Page 55
    set the Paper Type to Card Stock in the Paper Menu. Lexmark C920 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C920 supports stocks up to 216 g/m2. The following table lists the maximum
  • Lexmark Optra C | Card Stock & Label Guide - Page 56
    Paper Menu. Lexmark C925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The trays and the multipurpose feeder support card stock. The multipurpose feeder supports
  • Lexmark Optra C | Card Stock & Label Guide - Page 57
    g/m2 157 g/m2 135 g/m2 256 g/m2 Overview of label support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 to 216 g/m2 Card stock and label guidelines When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use
  • Lexmark Optra C | Card Stock & Label Guide - Page 58
    use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to 220 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock
  • Lexmark Optra C | Card Stock & Label Guide - Page 59
    E120 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E120 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following
  • Lexmark Optra C | Card Stock & Label Guide - Page 60
    support Paper source Tray 1 Manual feed Card stock Index Bristol 135-163 g/m2 (up to 90 lb) 135-163 g/m2 (up to 90 lb) Labels Paper 60-163 g/m2 (16-43 lb) 60-163 g/m2 (16-43 lb) For paper and transparency specifications, see the Lexmark procedures" on page 13. Printer specifications 60
  • Lexmark Optra C | Card Stock & Label Guide - Page 61
    office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E220 supports stocks up to 163 the maximum weights supported by Tray 1 and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Manual feed Index Bristol
  • Lexmark Optra C | Card Stock & Label Guide - Page 62
    designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E230, E232, E234(n), E330, and E332n support paper maximum weights supported by Tray 1 and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Manual feed Index Bristol
  • Lexmark Optra C | Card Stock & Label Guide - Page 63
    use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports stocks up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one sheet at a time. The following
  • Lexmark Optra C | Card Stock & Label Guide - Page 64
    labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and label stock from 60-90 g/m2 and index card stock up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one
  • Lexmark Optra C | Card Stock & Label Guide - Page 65
    labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports paper and label stock from 60-90 g/m2 and index card stock up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one
  • Lexmark Optra C | Card Stock & Label Guide - Page 66
    for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E320 and Lexmark E322 support stocks support Paper source Tray 1 Manual feed Index Bristol 163 g/m2 163 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover - - For paper and transparency specifications, see the Lexmark
  • Lexmark Optra C | Card Stock & Label Guide - Page 67
    for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E321 and Lexmark E323 support stocks support Paper Source Tray 1 Manual Feed Index Bristol 163 g/m2 163 g/m2 Card Stock Tag 163 g/m2 163 g/m2 Cover - - For paper and transparency specifications, see the Lexmark
  • Lexmark Optra C | Card Stock & Label Guide - Page 68
    T420 prints on many labels designed for use with laser printers. The Lexmark T420 supports stocks up to 60-199 g/m2 (16-53 lb). The standard tray is designed to handle 100 sheets of heavy labels, but its capacity may
  • Lexmark Optra C | Card Stock & Label Guide - Page 69
    printing on labels: • Set the Paper Type to Labels from the printer driver, the Local Printer Setup Utility, or MarkVision. • Do not load labels together with sheets will also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties. • Use labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 70
    information, see "Maintenance procedures" on page 13. Lexmark T430 The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We do not recommend using vinyl or polyester labels. The Lexmark T430 supports stocks from 60-163 g/m2 (16-43 lb
  • Lexmark Optra C | Card Stock & Label Guide - Page 71
    printing on labels: • Set the Paper Type to Labels from the printer driver, the Local Printer Setup Utility, or MarkVision. • Do not load labels together with sheets will also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • Use labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 72
    . For more information, see "Maintenance procedures" on page 13. Lexmark T520, T522 The Lexmark T520 and T522 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications
  • Lexmark Optra C | Card Stock & Label Guide - Page 73
    specifications, see the printer publications CD. The following table indicates the paper sizes each tray supports. Paper Source specifications For those difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 250-sheet
  • Lexmark Optra C | Card Stock & Label Guide - Page 74
    problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge page 13 • "Troubleshooting" on page 13 Lexmark T620, T622 Printer specifications 74
  • Lexmark Optra C | Card Stock & Label Guide - Page 75
    The Lexmark T620 and T622 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print Material Multipurpose feeder4 and optional
  • Lexmark Optra C | Card Stock & Label Guide - Page 76
    as 3 x 7-inch forms, Lexmark offers a variety of special media trays and drawers. Note: Optional 250-sheet Universally Adjustable Trays support forms with a minimum length of the most difficult print materials for laser printers. A special fuser cleaner should be used for label applications to optimize
  • Lexmark Optra C | Card Stock & Label Guide - Page 77
    " on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T630, T632, T634 The Lexmark T630, T632, and T634 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder
  • Lexmark Optra C | Card Stock & Label Guide - Page 78
    from the multipurpose feeder. 3 Pressure-sensitive area must enter the printer first for grain short paper. For paper and transparency specifications, CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x
  • Lexmark Optra C | Card Stock & Label Guide - Page 79
    index cards, Lexmark offers a variety fuser cleaner that prevents duplexing. It is recommended that when you run vinyl labels, you install a special oil fuser cleaner, P/N 56P1415. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. Printer
  • Lexmark Optra C | Card Stock & Label Guide - Page 80
    . Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When feeding labels, the
  • Lexmark Optra C | Card Stock & Label Guide - Page 81
    T640, T642, T644 The Lexmark T640, T642, and T644 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Card stock Labels Grain Index Dual-web
  • Lexmark Optra C | Card Stock & Label Guide - Page 82
    duplexing. It is recommended that when you run vinyl labels, you install a special oil fuser cleaner, P/N 40X2665. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. It is possible to duplex certain labels that have been specifically designed
  • Lexmark Optra C | Card Stock & Label Guide - Page 83
    • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T650, T652, T654, and T656dne The Lexmark T650, T652, T654, and T656dne print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose
  • Lexmark Optra C | Card Stock & Label Guide - Page 84
    difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional integral tray. Forms less than seven inches long are not supported from a 400-sheet universally adjustable tray. Standard and special trays Printer specifications 84
  • Lexmark Optra C | Card Stock & Label Guide - Page 85
    duplexing. It is recommended that when you run labels, you install a special oil fuser cleaner, P/N 40X2665. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. It is possible to duplex certain labels that have been specifically designed for
  • Lexmark Optra C | Card Stock & Label Guide - Page 86
    on page 13 • "Troubleshooting" on page 13 Lexmark W812 The Lexmark W812 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Card stock Labels Paper
  • Lexmark Optra C | Card Stock & Label Guide - Page 87
    to 163 g/m2 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W820 supports stocks up to 163 g/m2. Always feed labels and card stock from Tray 1, 2, or 3, each of which can
  • Lexmark Optra C | Card Stock & Label Guide - Page 88
    W840 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W840 supports stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2, or the multipurpose feeder
  • Lexmark Optra C | Card Stock & Label Guide - Page 89
    also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver
  • Lexmark Optra C | Card Stock & Label Guide - Page 90
    the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark W850 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W850 supports
  • Lexmark Optra C | Card Stock & Label Guide - Page 91
    also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver
  • Lexmark Optra C | Card Stock & Label Guide - Page 92
    laser printers. We do not recommend printing more than 20 pages of labels a month. For best results, feed labels from the paper tray. The Lexmark X203n and X204n printer models support maximum weights supported by the paper tray and the manual feeder. Overview of card stock and label support Card
  • Lexmark Optra C | Card Stock & Label Guide - Page 93
    and driver problems Lexmark X215 prints on paper office labels designed for use with laser printers. Labels can be fed only from the manual bypass feeder. Card stock and labels must be fed one sheet at a time through the manual bypass feeder. The following table lists the maximum weights supported
  • Lexmark Optra C | Card Stock & Label Guide - Page 94
    support Card stock Paper source Index Bristol Manual bypass feeder* Up to 163 g/m2 (90 lb) * Card stock can be fed only from the manual bypass feeder. Tag Up to 163 g/m2 (100 lb) For paper and transparency specifications, see the Lexmark X215 User's Guide laser printers. the printer driver.
  • Lexmark Optra C | Card Stock & Label Guide - Page 95
    card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark X264dn, X363dn, X364dn, and X364dw Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl
  • Lexmark Optra C | Card Stock & Label Guide - Page 96
    Manual feeder Multipurpose feeder - 163 g/m2 - 163 g/m2 Card stock should be grain short and set to exit the rear door. For paper and transparency specifications, see the printer a 1.6 mm (0.06 in.) strip on the leading and driver edge, and use a non-oozing adhesive. • Portrait orientation works
  • Lexmark Optra C | Card Stock & Label Guide - Page 97
    affect the print quality and cause jams or other paper handling problems. • Check with the manufacturer or vendor to ensure the Lexmark X422 The Lexmark X422 prints on many labels designed for use with laser printers. Card stock is supported from the multipurpose feeder, and labels are supported
  • Lexmark Optra C | Card Stock & Label Guide - Page 98
    printer and your cartridge with adhesive, and could void your printer and cartridge should be removed on the leading and driver edge, and a non-oozing adhesive should Lexmark X463de, X464de, X466dte, and X466dtwe Limit label printing to occasional use of paper office labels designed for laser printers
  • Lexmark Optra C | Card Stock & Label Guide - Page 99
    in the multipurpose feeder. The following table lists the maximum weights supported by the standard tray, optional 250- and 550-sheet trays, and multipurpose and manual feeders. Overview of card stock and label support Paper source Standard tray Index Bristol - Card Stock Tag - Optional 250
  • Lexmark Optra C | Card Stock & Label Guide - Page 100
    strip on the leading and driver edge, and use a paper handling problems. • laser printers. The Lexmark X500 and X502n do not support vinyl or polyester labels. The Lexmark X500 and X502n support 90-210 g/m2 (24-55 lb) stock. Card stock and labels are supported from Tray 1 and Tray 2. Tray 1 supports
  • Lexmark Optra C | Card Stock & Label Guide - Page 101
    media sizes, see the printer User's Guide on the publications CD. Lexmark X543, X544, and X546dtn Limit label printing to occasional use of paper office labels designed for use with laser printers. Lexmark X543, X544, and X546dtn do not support vinyl or polyester labels. The following table
  • Lexmark Optra C | Card Stock & Label Guide - Page 102
    optimal. This printer may support labels with problems. • Use only letter-, A4-, or legal-size full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge
  • Lexmark Optra C | Card Stock & Label Guide - Page 103
    X560 The Lexmark X560 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card stock
  • Lexmark Optra C | Card Stock & Label Guide - Page 104
    Do not use card stock that is creased. It may cause paper jams. Lexmark X642e The Lexmark X642e prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is
  • Lexmark Optra C | Card Stock & Label Guide - Page 105
    difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Note: Optional 250-sheet integral tray. Forms less than 7 inches are not supported from a 400-sheet universally adjustable tray. Standard and special trays Printer specifications 105
  • Lexmark Optra C | Card Stock & Label Guide - Page 106
    Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When printing on card stock
  • Lexmark Optra C | Card Stock & Label Guide - Page 107
    The Lexmark X644e and X646e print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card
  • Lexmark Optra C | Card Stock & Label Guide - Page 108
    . It is recommended that when you run vinyl labels, you install a special oil fuser cleaner, P/N 40X2665. When you order a new label cartridge, order the X644H01A high yield return print cartridge or X644X01A extra high yield print cartridge. It is possible to duplex certain labels that have been
  • Lexmark Optra C | Card Stock & Label Guide - Page 109
    procedures" on page 13 • "Troubleshooting" on page 13 Lexmark X651de, X652de, X654de, X656de, and X658de The Lexmark X651de, X652de, X654de, X656de, and X658de print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the
  • Lexmark Optra C | Card Stock & Label Guide - Page 110
    " on page 9. For difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Notes: • The X658de does not offer less than seven inches in length are not supported from a 400-sheet universally adjustable tray. Printer specifications 110
  • Lexmark Optra C | Card Stock & Label Guide - Page 111
    print materials for laser printers. Printing labels on the X651de, X652de, X654de, X656de, and X658de requires a special fuser cleaner that prevents duplexing. It is recommended that you install a special oil fuser cleaner, P/N 40X2665, when you run labels. When you order a new cartridge, be sure
  • Lexmark Optra C | Card Stock & Label Guide - Page 112
    cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 112
  • Lexmark Optra C | Card Stock & Label Guide - Page 113
    X736, and X738 Lexmark X734, X736, and X738 printer models support card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, the multipurpose tray, and the optional 550-sheet specialty media drawer. Note: The optional 2,000-sheet tray does not support card stock or labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 114
    * 50-150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 lb) For more information on the supported media sizes, see the printer User's Guide on the publications CD. Card stock with chemicals that may contaminate the printer. • Be aware that preprinting,
  • Lexmark Optra C | Card Stock & Label Guide - Page 115
    X782 The Lexmark X782 can print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview of card stock support Paper source
  • Lexmark Optra C | Card Stock & Label Guide - Page 116
    optimal. This printer may support labels with for laser printers. A fuser equipped problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge
  • Lexmark Optra C | Card Stock & Label Guide - Page 117
    Lexmark X790 Lexmark X790 supports card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, and the multipurpose feeder. Note: The optional 2,000-sheet drawer does not support card stock or labels. Overview of card stock support g/m2 216 g/m2 Printer specifications 117
  • Lexmark Optra C | Card Stock & Label Guide - Page 118
    g/m2 1 Vinyl labels are supported only when the printing environment and recommended for use with laser printers. To prevent specialty media Paper Type to Labels from the printer driver. • Use standard-size products ( printer and your cartridge with adhesive, and could void your printer and cartridge
  • Lexmark Optra C | Card Stock & Label Guide - Page 119
    -in.) strip should be removed on the leading and driver edge, and a non-oozing adhesive should be used. printer first. Lexmark X850, X852e, and X854e Limit label printing to occasional use of paper office labels designed for laser printers. Paper labels are supported in Tray 1, Tray 2, and the manual
  • Lexmark Optra C | Card Stock & Label Guide - Page 120
    support Use only materials recommended for use with laser printers. To prevent specialty media sheets from • Set the Paper Type to Labels from the printer driver. • Use standard-size products (either A4 or Letter printer and your cartridge with adhesive, and could void your printer and cartridge
  • Lexmark Optra C | Card Stock & Label Guide - Page 121
    manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver laser printers. We do not recommend using vinyl or polyester labels. The Lexmark X860e, X862e, and X864e support stocks
  • Lexmark Optra C | Card Stock & Label Guide - Page 122
    also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver
  • Lexmark Optra C | Card Stock & Label Guide - Page 123
    • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Printer specifications 123
  • Lexmark Optra C | Card Stock & Label Guide - Page 124
    Lexmark X925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Trays and the multipurpose feeder support card stock. The multipurpose feeder supports card stocks up to 256 g/m2. Always
  • Lexmark Optra C | Card Stock & Label Guide - Page 125
    Overview of label support Paper source Standard 150-sheet tray Multipurpose feeder 11.7 in.) Weight: Up to 216 g/m2 Card stock and label guidelines When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing
  • Lexmark Optra C | Card Stock & Label Guide - Page 126
    X945 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X940 and X945 support stocks up to 220 g/m2. Always feed labels and card stock from Tray 1, 2, or 3. We recommend printing
  • Lexmark Optra C | Card Stock & Label Guide - Page 127
    to Card Stock. • Do not use creased card stock. It may cause paper jams. Optra plus, 4039, 4029, 4019, WinWriter 600 printers The following table lists the maximum weights supported by each of the special card stock and label trays, as well as the manual feed tray. Overview of card stock and label
  • Lexmark Optra C | Card Stock & Label Guide - Page 128
    of purchase for more information on the optional trays available for your printer. Note: If you use materials with a weight over 135 g/ 60-163 g/m2 Lower: All supported media Upper: 120-150 g/m2 Lower: 140-180 g/m2 Upper: 260-265 g/m2 Lower: 260-300 g/m2 1 You can manually feed card stock with a
  • Lexmark Optra C | Card Stock & Label Guide - Page 129
    media Upper and Lower: All supported media 1 Select the appropriate tray according to the part of the form (pressure-sensitive area or paper base) that enters the printer first when feeding from the tray. 2 Grain long is recommended. Media specifications Labels Card stock Thickness: 0.102
  • Lexmark Optra C | Card Stock & Label Guide - Page 130
    FineTM toner cartridges (P/N 1382100 or 1382150) when duplexing. • Note that 4039 print cartridges are not recommended for general use in Optra printers, since they cannot provide the 1200 dpi quality desirable for graphics and gray scaling. Using third party, non-Lexmark cartridges and fuser
  • Lexmark Optra C | Card Stock & Label Guide - Page 131
    trays. For paper and transparency specifications, see the printer User's Guide. Optra C710 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra C710 supports stocks up to 163 g/m2 (90 lb). Feed
  • Lexmark Optra C | Card Stock & Label Guide - Page 132
    card stock: • We recommend using Springhill Index Plus 90 lb card stock. • For the best print quality, always set the Paper Type to Card Stock. Printer specifications 132
  • Lexmark Optra C | Card Stock & Label Guide - Page 133
    labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra Color 1200 supports stock up to support Paper source Multipurpose feeder Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide
  • Lexmark Optra C | Card Stock & Label Guide - Page 134
    E, Ep Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra E and Optra Ep support stocks up to 163 g/m2 (43 lb). Tray 1 can hold up to 10 sheets of card stock or labels. The following table lists
  • Lexmark Optra C | Card Stock & Label Guide - Page 135
    E310, E312 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra E310 and Optra E312 support stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 136
    feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 199 g/m2 199 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover 176 g/m2 176 g/m2 For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 180 g/m2 300 g/m2
  • Lexmark Optra C | Card Stock & Label Guide - Page 137
    250 sheets 24 lb bond 25 mm (1 in.) 150 sheets 150 sheets Manual All supported media - 1 sheet 1 sheet 1 Card stock weights may vary ± 5%. laser printers. We do not recommend using vinyl or polyester labels or any card stock with the Optra K 1220 printer. Always feed labels from the manual
  • Lexmark Optra C | Card Stock & Label Guide - Page 138
    use labels that have exposed adhesive on the label sheets. Optra M410, M412 The Optra M410 and Optra M412 print on card stock and many labels designed for use with laser printers. The following tables list the weights supported by the multipurpose feeder and the 250-sheet label tray, P/N 4K00293
  • Lexmark Optra C | Card Stock & Label Guide - Page 139
    support card stock and label printing. You can try occasional label printing from Tray 1, but we recommend you use the multipurpose feeder. For paper and transparency specifications, see the printer User's Guide printer and your cartridge with adhesive, and could void your printer and cartridge driver
  • Lexmark Optra C | Card Stock & Label Guide - Page 140
    to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Always feed labels from the multipurpose tray. The multipurpose tray can hold up to 50 sheets of labels. The Optra N supports print materials up to 128 g/m2 (34 lb). The
  • Lexmark Optra C | Card Stock & Label Guide - Page 141
    than 300 Sheffield could result in printing degradation. Optra S Optra S 1250, S 1255, S 1620, S 1625, S 1650, S 1855, S 2420, S 2450, S 2455, Se 3455 The following table lists the maximum weights supported by each of the printer trays. Print material specifications Range or maximum weight
  • Lexmark Optra C | Card Stock & Label Guide - Page 142
    lb bond) For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Thickness: 0.102-0.305 mm (0.004-0. (100 lb) The following table indicates the paper sizes each tray supports. Paper source specifications for all media Source 250-sheet tray 500-
  • Lexmark Optra C | Card Stock & Label Guide - Page 143
    difficult print materials for laser printers to handle. To optimize printer performance, use the special label fuser cleaner for printers dedicated to label printing. To get the special label oil fuser cleaner (to use with simplex labels and vinyl labels), order print cartridge P/N 1382929. If you
  • Lexmark Optra C | Card Stock & Label Guide - Page 144
    " on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Yield (average) 17,600 pages Coverage (approximate) 5% Optra SC 1275 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels
  • Lexmark Optra C | Card Stock & Label Guide - Page 145
    to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Optra T The Optra T prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight
  • Lexmark Optra C | Card Stock & Label Guide - Page 146
    first for grain short paper. For paper and transparency specifications, see the printer User's Guide. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal sizes (width x length) Source Minimum
  • Lexmark Optra C | Card Stock & Label Guide - Page 147
    labels on the Optra T requires a special label fuser cleaner that prevents duplexing. It is recommended that when you run vinyl labels, you install a special oil fuser cleaner, P/N 99A0725. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. It
  • Lexmark Optra C | Card Stock & Label Guide - Page 148
    on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Optra W810 Limit label printing to occasional use of A4- or letter-size paper labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra W810 supports stocks up to 163 g/m2 (43 lb
  • Lexmark Optra C | Card Stock & Label Guide - Page 149
    may contaminate your printer and could void your warranty. When printing on card stock: • Set the Paper Type to Plain Paper. The Optra W810 treats card stock the same as Plain Paper. It does not adjust the print speed or fuser temperature when the Paper
  • Lexmark Optra C | Card Stock & Label Guide - Page 150
    and increase toner buildup in the fuser. Weight in pounds of a specific number of sheets of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support tray that helps the printer separate one sheet
  • Lexmark Optra C | Card Stock & Label Guide - Page 151
    Driver edge Embossing Feed Fiber content Fuse grade Fusing Glue contamination Grain Ink contamination Ironing Laser ink Laser-perfs Leading edge Matrix Micro-perfs Moisture content Nesting Offset powder Oil bleed Ooze Perforation For printers that use a fixed reference for feeding paper through the
  • Lexmark Optra C | Card Stock & Label Guide - Page 152
    of the print material. If the paper is too rough, the toner does not fuse to the paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding problems in the printer. Smoothness is measured in Sheffield points; lower values indicate smoother paper
  • Lexmark Optra C | Card Stock & Label Guide - Page 153
    Vellum finish Wash boarding Zone coating A finish with a rough surface similar to eggshell and antique finishes. A vellum finish is relatively absorbent, providing good ink penetration. Waviness in the stock that gives a rippled appearance to the material; generally moisture related. Placing
  • Lexmark Optra C | Card Stock & Label Guide - Page 154
    fuser cleaner (Optra S) 143 labels construction 21, 19 design 23, 19 dual web forms 27 duplexing 19 integrated forms 29 printer maintenance 19 printing 19 vinyl and polyester labels 28 laser printers material 8 thermography inks 10 topcoats 23 troubleshooting 13 V vinyl labels 23 volume printing
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
Card Stock & Label Guide
Laser Printers
January 2011
www.lexmark.com