Lexmark Optra Se 3455 Card Stock & Label Guide
Lexmark Optra Se 3455 Manual
 |
View all Lexmark Optra Se 3455 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark Optra Se 3455 manual content summary:
- Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 1
Card Stock & Label Guide Laser Printers January 2011 www.lexmark.com - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 2
by the manufacturer, are the user's responsibility. For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access to the Internet, you can contact Lexmark by mail: Lexmark International, Inc. Bldg 004-2/CSC - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 3
11 Maintenance procedures...13 Troubleshooting...13 Card stock 15 Weight...15 Grain orientation...16 Coatings...17 Offset powders...18 Labels...19 Label characteristics...19 Printing on labels...19 Duplexing paper labels...19 Label components...21 Label design guidelines...23 Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 4
C782...49 Lexmark C790...50 Lexmark C910...52 Lexmark C912...53 Lexmark C920...55 Lexmark C925...56 Lexmark C935...58 Lexmark E120...59 Lexmark E220...61 Lexmark E230, E232, E234(n), E330, and E332n 62 Lexmark E238, E240, E240n, E340, and E342n 63 Lexmark E250, E350, and E450n...64 Lexmark E260 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 5
124 Lexmark X940 and X945...126 Optra plus, 4039, 4029, 4019, WinWriter 600 printers 127 Optra C...130 Optra C710...131 Optra Color 1200...133 Optra E, Ep...134 Optra E310, E312...135 Optra Es special media printer...136 Optra K 1220...137 Optra M410, M412...138 Optra N...140 Optra S...141 Optra SC - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 6
6 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 7
you select appropriate print materials for the following Lexmark laser printers. Model series 4019 models 4029 models 4039 10 printer. See other printer documentation for detailed information about the paper, envelopes, and transparencies suitable for your printer. In addition to printer-specific - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 8
. Exclusive printing of labels, for example, may result in more frequent service calls. Proper printer maintenance helps alleviate these problems. For information about maintaining your printer, see "Maintenance procedures" on page 13. Print material testing Choosing print materials can seem complex - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 9
more information, locate your printer in the "Printer specifications" chapter. Your printer can accept a wide range of stock weights, but materials either too light or too heavy can cause printing problems. Heavy and/or thicker materials may not heat quickly enough in the fuser, resulting in poor - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 10
problems if curl is present. Most label manufacturers recommend printing in a temperature range of 18-24°C (65-75°F) with relative humidity of 40-60%. Lexmark printers cuts). Back splits and pop-out windows are also not recommended. If perforations or die-cuts are part of the design of the print - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 11
to have installed a maintenance kit as specified (if applicable) • use of printing media outside of Lexmark specifications • use of non-Lexmark supplies (such as toner cartridges and/or inkjet cartridges) • use of non-Lexmark product or component Pick roller technology Some printers have an auto - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 12
For the following printers, make sure perforations fall outside the 0.3-0.79-inch area on the leading edge of the media: Optra S, Optra T, T520, T522, T620, T622, T630, T632, T634, T640, T642, T644, T650, T652, T654, T656dne, X203, X204, X264, X363, X364, X463, X464, X466, X543, X544, X546dtn, - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 13
cleaning process every time you replace the black cartridge, more often with some media. Failure to follow maintenance procedures for your printer could cause jamming, poor print quality, feeding problems, and fuser problems. Troubleshooting The following table provides solutions for some common - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 14
Solutions to printing problems Problem Solution Print on heavy stock is blurred or out of focus. Toner rubs off the page. approximately five seconds, and then print five more sheets of paper to remove any toner that may have accumulated. Printing shows voids. Change the Paper Type to Plain - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 15
withstand the high temperatures used in laser printing. Perforation and creasing may cause toner onto the paper properly, resulting in poor print quality. To determine if your printer is able to print on cover stock, locate your printer in the "Printer specifications" chapter and review the supported - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 16
problems, and material thicker than 0.17 mm (0.007 in.) may reduce print quality. Contact your supplier to determine the weight of any card stock you currently use. See the individual printer specifications in this document for more information about the card stock weights your printer supports - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 17
specifications in "Printer specifications" on page 30 for more information about the recommended grain direction for card stock you use with your printer. Coatings Surface texture and coatings on card stock significantly affect toner adhesion (fuse grade), print quality, and feed reliability. We - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 18
Offset powders We do not recommend using offset powders or other foreign materials to speed drying. Offset powders are used by print shops to prevent printed pages from sticking together. Powder is usually sprayed on the printed page right before it reaches the stacker on the offset printing press. - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 19
service warranties. Do not feed labels through the printer more than once. Doing so may result in adhesive contamination to the cartridge and other components. Depending on your printer model and the number of labels you print, printing labels may require special printer maintenance. For specific - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 20
the label adhesive and the printer, thereby preventing any adhesive contamination in the printer. The following graphics show the rib locations for the Optra S, Optra T, and Lexmark T, respectively. Optra S rib locations (rib width = 2 mm): Optra T and Lexmark T rib locations (rib width = 2 mm - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 21
labels specifically designed for duplexing. In addition, you can use the wiper to simplex paper labels and duplex paper in the same printer. When ordering a new cartridge, be sure to order the cartridge that includes the correct fuser wiper. Label components Labels are composed of three basic parts - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 22
, X736, X738, W840 • Optra S 1250, S 1650, S 2450 • Optra S 1255, S 1625, S 1855, S 2455 • Optra Se 3455 • Optra T610(n), T612(n), T614(n), T616(n) toner contamination inside the printer and improve feed performance. Slick, non-porous liners are harder to feed and increase toner buildup in the fuser - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 23
printing problem is printer and cartridge contamination. The adhesives are semi-liquid and may contain volatile components. If the sheet jams in the fuser, the adhesive can melt, thereby contaminating parts of the printer or releasing fumes. To avoid exposing adhesive to the paper path guides, drive - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 24
driver edge Using cut sheet labels with adhesive applied to the edge of the sheet will contaminate your printer and your cartridge and could void your printer and cartridge design for Optra plus printers, 4039, 4029, and 4019, as well as the T610, T520, T620, and T630 laser printers. Note: The - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 25
Leading Edge 8.5 in. 215.9 mm Waste strip 0.25 in (6.35 mm) Non-print area 0.33 in. 8.38 mm 0.5 in. Top perforation 12.7 mm Waste strip Driver edge 11 in. 279.4 mm 0.06 in. 1.6 mm Perforation end Liner edge 0.33 in. 8.38 mm Non-print area 0.25 in. 6.35 mm Non-print - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 26
The following diagram shows a recommended label design for the T640 and T650 laser printers. Labels 26 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 27
Cut sheet paper labels • Generally, cut sheet paper labels work well with your printer. • Coating or sizing to make the paper liquid-resistant decreases toner adhesion and increases the risk of toner contaminating the fuser. At a minimum, paper labels should be equivalent in weight and rigidity to - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 28
• To help prevent material from slipping in the fuser, we recommend knurling, which roughens up the exposed printer, which will require printer servicing. For more information on recommended label designs, see "Label design guidelines" on page 23. • For Optra S, Optra T, and Lexmark T printers - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 29
are non-absorbing, which leads to toner build-up in the fuser that requires special maintenance. See the documentation that came with your printer for specific information about maintaining your printer. Vinyls may require a topcoat to ensure good toner adhesion. • Polyester labels are less heat - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 30
Printer specifications Lexmark C500n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C500n does not support vinyl or polyester labels. The Lexmark C500n supports 90-210-g/m2 (24-55-lb) stock. Card stock and labels are supported from Tray 1 and - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 31
C510 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C510 does not support vinyl or polyester labels. The Lexmark C510 supports stocks up to 176 g/m2. Feed labels from the standard tray only, which holds up to 80 sheets of labels or up to - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 32
support vinyl or polyester labels. The Lexmark C520, C522, and C524 support stocks up to 176 g/m2. Card stock is supported from Tray 1, Tray 2, the manual feed slot, and the multipurpose feeder. Labels are supported only from the multipurpose feeder and the manual feed slot. Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 33
2 (optional tray) 120 g/m2 163 g/m2 Multipurpose feeder Manual feed slot 120 g/m2 163 g/m2 * Vinyl labels are not supported. Card stock Tag grain long grain short 120 g/m2 163 on the supported media sizes, see the printer User's Guide on the publications CD. Printer specifications 33 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 34
to Card Stock. For more information, see "Pick roller technology" on page 11. Lexmark C530, C532, and C534 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C530, C532, and C534 do not support vinyl or polyester labels. Printer specifications 34 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 35
: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD. Printer specifications 35 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 36
11. Lexmark C540, C543, C544, and C546dtn Notes: • Your printer may not have a 650-sheet duo drawer with an integrated multipurpose feeder. • The 250-sheet tray (Tray 1) and the 650-sheet duo drawer support the same paper sizes and types. • Not all models are pictured. Printer specifications 36 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 37
office labels designed for laser printers. The Lexmark C540, C543, C544, and C546dtn do not support vinyl or polyester labels. The Lexmark C540, C543, C544, and C546dtn support card stock weights up to 176 g/m2. Card stock and labels are supported from Tray 1, Tray 2, the manual feeder, and the - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 38
C720 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C720 does not support vinyl or polyester labels. The Lexmark C720 supports stocks up to 43 lb (163 g/m2). Feed labels from the standard tray only, which holds up to 80 sheets of labels - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 39
Overview of card stock and label support Paper source Tray 1 (standard tray) Index Bristol 163 g/m2 Card stock Tag 163 g/m2 Cover - For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 163 g/m2 - Media specifications Labels Card stock Width: 105- - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 40
of label support Paper source Standard 550-sheet tray (Tray 1) Optional 550-sheet tray Optional 550-sheet specialty media drawer Multipurpose tray Dual Web/Paper 180 g/m2 180 g/m2 Labels Polyester 220 g/m2 220 g/m2 Vinyl 300 g/m2 300 g/m2 180 g/m2 220 g/m2 300 g/m2 Printer specifications 40 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 41
the supported media sizes, see the printer User's Guide on printer. • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper-handling problems. For more information, see "Pick roller technology" on page 11. Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 42
on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. The Lexmark C750 paper feeding mechanism uses advanced technology that enhances feeding reliability. The Lexmark C750 trays, which hold approximately - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 43
68-90°F). 4 Pressure-sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark C750 Publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 44
" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C752 The Lexmark C752 prints on many labels designed for use with laser printers. The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m2 paper, reliably feed all supported media. The following - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 45
-90°F). 4 Pressure-sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark C752 Publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 46
that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C760 and C762 Printer specifications 46 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 47
Lexmark C760 and C762 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2,000-sheet drawer supports paper only. Print material specifications Range or maximum weight - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 48
for laser printers. A fuser equipped with a web oiler may be required for label applications to optimize feed reliability. Contact your local service on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 48 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 49
, C772, C780, and C782 The Lexmark C770, C772, C780, and C782 print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 50
" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C790 Lexmark C790 prints on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Printer specifications 50 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 51
printers. A fuser equipped with a dry web cleaner may be required for label applications to optimize feed reliability. If you print large quantities of labels or other glossy print media, then install a dry web cleaner upgrade kit (P/N 40X1856). Contact your local service representative for ordering - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 52
technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C910 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C910 supports stocks up to 163 g/m2 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 53
occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C912 supports stocks up to 216 g/m2. The following table lists the maximum weights supported by the standard tray and the multipurpose feeder. Printer specifications 53 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 54
from MarkVision Professional, set the Paper Type to Card Stock in the Paper Menu. Set the CardStock Weight (under the Paper Weight menu) to Heavy. • Download the vinyl file, vinyl8ppm.npa, from our FTP site and send it to the printer (copy the file to the printer port). Printer specifications 54 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 55
set the Paper Type to Card Stock in the Paper Menu. Lexmark C920 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C920 supports stocks up to 216 g/m2. The following table lists the maximum - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 56
the Paper Menu. Lexmark C925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not not support labels. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Printer specifications 56 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 57
support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 g/m2 Labels Vinyl Not applicable Occasional use up to 256 g/m2 Media specifications stock and label guidelines When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 58
use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to 220 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 59
recommend using vinyl or polyester labels. The Lexmark E120 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder. Printer specifications 59 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 60
card stock and label support Paper source Tray 1 Manual feed Card stock Index Bristol 135-163 g/m2 (up to 90 lb) 135-163 g/m2 (up to 90 lb) Labels Paper 60-163 g/m2 (16-43 lb) 60-163 g/m2 (16-43 lb) For paper and transparency specifications, see the Lexmark E220 Publications CD. Vinyl - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 61
designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E220 supports stocks up support Paper source Tray 1 Manual feed Index Bristol 163 g/m2 163 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover - - For paper and transparency specifications, see the Lexmark - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 62
, E234(n), E330, and E332n Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E230, E232, E234(n), E330, and E332n support paper and label stock from 60-90 g/m2 (24 lb) and card stock up to 163 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 63
source Tray 1 Index Bristol - Card Stock Tag - Cover - Tray 2 - - - Manual Feed 163 g/m2 163 g/m2 - Note: The E238 printer does not support a second drawer option. For paper and transparency specifications, refer to the printer publications CD. Labels Paper 90 g/m2 90 g/m2 163 g/m2 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 64
to 163 g/m2 Tag (100 lb) Note: To minimize curl, use the rear exit when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Printer specifications 64 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 65
of card stock and label support Paper source Tray 1 Index Bristol - Card Stock Tag - Tray 2 - - Manual Feed 163 g/m2 Card stock should be grain short and set to exit the rear door. 163 g/m2 For paper and transparency specifications, see the printer publications CD. Cover - - - Labels - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 66
for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E320 and Lexmark E322 support stocks support Paper source Tray 1 Manual feed Index Bristol 163 g/m2 163 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover - - For paper and transparency specifications, see the Lexmark - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 67
for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E321 and Lexmark E323 support stocks support Paper Source Tray 1 Manual Feed Index Bristol 163 g/m2 163 g/m2 Card Stock Tag 163 g/m2 163 g/m2 Cover - - For paper and transparency specifications, see the Lexmark - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 68
prints on many labels designed for use with laser printers. The Lexmark T420 supports stocks up to 60-199 g/m2 (16-53 from print media sources that are not supported may damage your printer. For paper and transparency specifications, see the Lexmark T420 Publications CD. Printer specifications 68 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 69
printing on labels: • Set the Paper Type to Labels from the printer driver, the Local Printer Setup Utility, or MarkVision. • Do not load labels together with sheets will also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties. • Use labels - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 70
For more information, see "Maintenance procedures" on page 13. Lexmark T430 The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We do not recommend using vinyl or polyester labels. The Lexmark T430 supports stocks from 60-163 g/m2 (16- - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 71
the printer driver, the Local Printer printer and your cartridge with adhesive, and could void your printer and cartridge printer. Preprinting introduces semi-liquid and volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 72
information, see "Maintenance procedures" on page 13. Lexmark T520, T522 The Lexmark T520 and T522 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 73
specifications, see the printer publications CD. The following table indicates the paper sizes each tray supports. Paper Source specifications such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and Part number 11K1572 11K1573 11K1574 11K1878 Printer specifications 73 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 74
Part number 11K1921 11K1922 11K1941 11K1942 Card stock and label guidelines Labels are one of the most difficult print materials for laser printers. A special fuser " on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T620, T622 Printer specifications 74 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 75
The Lexmark T620 and T622 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print Material Multipurpose feeder4 and optional - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 76
label guidelines Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be used for label applications to optimize feed reliability. See your printer documentation for information on ordering additional label fuser cleaners. Printer specifications 76 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 77
procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T630, T632, T634 The Lexmark T630, T632, and T634 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Printer specifications 77 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 78
feeder. 3 Pressure-sensitive area must enter the printer first for grain short paper. For paper and transparency specifications, see the publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 79
a special label fuser cleaner that prevents duplexing. It is recommended that when you run vinyl labels, you install a special oil fuser cleaner, P/N 56P1415. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. Printer specifications 79 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 80
that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 80 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 81
Lexmark T640, T642, and T644 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support multipurpose feeder. Media specifications Labels Card stock Thickness - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 82
P/N 40X2665. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 83
" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T650, T652, T654, and T656dne The Lexmark T650, T652, T654, and T656dne print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 84
sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Forms less than seven inches long are not supported from a 400-sheet universally adjustable tray. Standard Part number 30G0932 30G0933 30G0836 30G0890 30G0891 30G0872 30G0871 Printer specifications 84 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 85
P/N 40X2665. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 86
• "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark W812 The Lexmark W812 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 87
letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W820 supports stocks up to 163 g/m2. Always specifications, see the printer publications CD. Weight 60-163 g/m2 60-163 g/m2 60-105 g/m2 120-128 g/m2 Media specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 88
W840 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W840 supports stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2, or the multipurpose feeder - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 89
Stock from the printer driver. • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. Printer specifications 89 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 90
the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark W850 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W850 supports - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 91
also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 92
printing to occasional use of paper office labels designed for laser printers. We do not recommend printing more than 20 pages of labels a month. For best results, feed labels from the paper tray. The Lexmark X203n and X204n printer models support stocks up to 90 g/m2 (24 lb). Note: The smallest - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 93
when printing on card stock and labels. For more information, see "Maintenance procedures" on page 13. Lexmark X215 The Lexmark X215 prints on paper office labels designed for use with laser printers. Labels can be fed only from the manual bypass feeder. Card stock and labels must be fed one sheet - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 94
support Card stock Paper source Index Bristol Manual bypass feeder* Up to 163 g/m2 (90 lb) * Card stock can be fed only from the manual bypass feeder. Tag Up to 163 g/m2 (100 lb) For paper and transparency specifications, see the Lexmark X215 User's Guide. Cover - Media specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 95
can load up to 50 label sheets in the standard tray. Card stock must be sent through the manual feeder one sheet at a time. The following table lists the maximum weights supported by the standard tray, optional 250- and 550-sheet trays, and multipurpose and manual feeders. Printer specifications 95 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 96
Tag - - Optional 250-sheet tray Optional 550-sheet tray Manual feeder Multipurpose feeder - 163 g/m2 - 163 g/m2 Card stock should be grain short and set to exit the rear door. For paper and transparency specifications, see the printer publications CD. Cover - - - Labels Paper 90 g/m2 90 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 97
stock when possible. For more information, see "Maintenance procedures" on page 13. Lexmark X422 The Lexmark X422 prints on many labels designed for use with laser printers. Card stock is supported from the multipurpose feeder, and labels are supported from the standard tray. The following table - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 98
. Lexmark X463de, X464de, X466dte, and X466dtwe Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl, pharmacy, or polyester labels. It is recommended to print no more than 20 pages of paper labels a month. Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 99
Tag - Optional 250-sheet tray - Optional 550-sheet tray Manual feeder Multipurpose feeder 163 g/m2 Card stock should be grain short and set to exit the rear door. - 163 g/m2 For paper and transparency specifications, see the printer publications CD. Cover - - - Labels Paper 90 g/m2 90 g/m2 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 100
the leading and driver edge, and use problems. Maintenance procedures" on page 13. Lexmark X500 and X502n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark X500 and X502n do not support vinyl or polyester labels. The Lexmark X500 and X502n support - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 101
printer User's Guide on the publications CD. Lexmark X543, X544, and X546dtn Limit label printing to occasional use of paper office labels designed for use with laser printers. Lexmark X543, X544, and X546dtn do not support be experienced from the multipurpose feeder. Printer specifications 101 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 102
feeding may be experienced from the multipurpose feeder. Media specifications Labels Card stock Thickness: 0.102-0.305 mm (0.004-0.012 in.) Smoothness: 50-300 Sheffield* * 50-150 Sheffield is optimal. This printer may support labels with smoothness of less than 50 Sheffield such as - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 103
Lexmark X560 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Media specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 104
Do not use card stock that is creased. It may cause paper jams. Lexmark X642e The Lexmark X642e prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 105
sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. tray. Forms less than 7 inches are not supported from a 400-sheet universally adjustable tray. Standard Part number 20G1237 20G1230 20G1236 20G1229 20G1224 20G1223 20G1240 Printer specifications 105 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 106
that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 106 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 107
Lexmark X644e and X646e print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 108
yield print cartridge. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must install a special fuser wiper. The - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 109
16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark X651de, X652de, X654de, X656de, and X658de The Lexmark X651de, X652de, X654de, X656de, and X658de print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 110
" on page 9. For difficult-to-print sizes, such as 3 x 5-inch index cards, Lexmark offers a variety of special media trays and drawers. Notes: • The X658de does not offer less than seven inches in length are not supported from a 400-sheet universally adjustable tray. Printer specifications 110 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 111
, when you run labels. When you order a new cartridge, be sure the cartridge includes the correct fuser cleaner. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters have - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 112
that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 112 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 113
of label support Paper source Standard 550-sheet tray (Tray 1) Optional 550-sheet tray Optional 550-sheet specialty media drawer Multipurpose tray Dual Web/Paper 180 g/m2 180 g/m2 Labels Polyester 220 g/m2 220 g/m2 Vinyl 300 g/m2 300 g/m2 180 g/m2 220 g/m2 300 g/m2 Printer specifications 113 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 114
the supported media sizes, see the printer User's Guide on printer. • Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or other paper-handling problems. For more information, see "Pick roller technology" on page 11. Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 115
supported only when the printing environment and media are 20-32.2°C (68-90°F). 2 The skew performance of heavy vinyl labels may be enhanced by feeding from an optional 500-sheet drawer if placement of the image is critical. For paper and transparency specifications, see the printer User's Guide - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 116
printer control panel, set Paper Type to Card Stock in the Paper Menu. • Do not use creased card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 117
Lexmark X790 Lexmark X790 supports card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, and the multipurpose feeder. Note: The optional 2,000-sheet drawer does not support card stock or labels. Overview of card stock support g/m2 216 g/m2 Printer specifications 117 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 118
labels are supported only when Media specifications Labels laser printers. To prevent specialty media sheets from sticking together, remove each sheet from the exit bin as it is printed. Card stock and label guidelines When printing on labels: • Set Paper Type to Labels from the printer driver - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 119
be removed on the leading and driver edge, and a non-oozing laser printers. Paper labels are supported in Tray 1, Tray 2, and the manual bypass feeder. The following table lists the maximum weights supported. Note: Scanning large quantities of labels is not recommended. Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 120
recommended for use with laser printers. To prevent specialty media sheets from sticking together, remove each sheet from the output bin as it is printed. Card stock and label guidelines When printing on labels: • Set the Paper Type to Labels from the printer driver. • Use standard-size products - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 121
manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver laser printers. We do not recommend using vinyl or polyester labels. The Lexmark X860e, X862e, and X864e support stocks - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 122
Stock from the printer driver. • Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting introduces semi-liquid and volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. Printer specifications 122 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 123
• We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Printer specifications 123 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 124
Lexmark X925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Trays and the multipurpose feeder support card stock. The multipurpose feeder supports 256 g/m2 Printer specifications 124 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 125
support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 g/m2 Labels Vinyl Not applicable Occasional use up to 256 g/m2 Media specifications stock and label guidelines When printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 126
paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X940 and X945 support stocks up to 220 g/m2 support Labels Card stock Tray 1 105 g/m2 105 g/m2 Tray 2 and 3 220 g/m2 220 g/m2 Multipurpose feeder 220 g/m2 220 g/m2 Media specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 127
grams) Manual feed tray Index Bristol 163 g/m2 90 g/m2 135 g/m2 163 g/m2 199 g/m2 253 g/m2 Card stock Tag 163 g/m2 - 135 g/m2 163 g/m2 203 g/m2 241 g/m2 Cover 176 g/m2 - 135 g/m2 176 g/m2 216 g/m2 285 g/m2 For paper and transparency specifications, see your printer User's Guide. Labels Paper - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 128
. Card stock and labels supported (11-inch card stock and manually feed card stock with a weight up to 285 g/m2. 2 For pressure-sensitive materials under 131 g/m2, grain long is recommended. For pressure-sensitive materials over 131 g/m2, grain short is recommended. Printer specifications - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 129
media Upper and Lower: All supported media 1 Select the appropriate tray according to the part of the form (pressure-sensitive area or paper base) that enters the printer first when feeding from the tray. 2 Grain long is recommended. Media specifications Labels Card stock Thickness: 0.102 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 130
poor print quality, feeding problems, and fuser problems. Additional maintenance for Optra plus, Optra, 4039 12C (with serial numbers after BC143), and 4039 10 plus printers • If your laser printer has a fuser cleaner, we recommend that you change it when you replace the print cartridge. If you are - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 131
the paper trays. For paper and transparency specifications, see the printer User's Guide. Optra C710 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra C710 supports stocks up to 163 g/m2 (90 lb - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 132
card stock: • We recommend using Springhill Index Plus 90 lb card stock. • For the best print quality, always set the Paper Type to Card Stock. Printer specifications 132 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 133
table lists the maximum weights supported by the multipurpose feeder. Overview of card stock and label support Paper source Multipurpose feeder Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 135 g/m2 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 134
by Tray 1 and the manual feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 163 g/m2 163 g/m2 Card stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - - Labels Paper 150 g/m2 150 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 135
feeder. Overview of card stock and label support Paper Source Automatic Paper Feeder Manual Sheet Feeder Index Bristol 163 g/m2 163 g/m2 Card Stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - - Labels Paper 163 g/m2 163 g/m2 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 136
feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 199 g/m2 199 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover 176 g/m2 176 g/m2 For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 180 g/m2 300 g/m2 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 137
vinyl or polyester labels or any card stock with the Optra K 1220 printer. Always feed labels from the manual feed tray or the optional multipurpose feeder. The multipurpose feeder can hold up to 30 sheets of labels. The following table lists the maximum weights supported. Printer specifications 137 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 138
Overview of card stock and label support Paper source Multipurpose feeder Manual feed tray Card stock Index Bristol Tag - - - - For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Width: Length: Weight: 210-216 mm (8.3-8.5 in.) 279-356 mm - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 139
feed paper; it does not support card stock and label printing. You can try occasional label printing from Tray 1, but we recommend you use the multipurpose feeder. For paper and transparency specifications, see the printer User's Guide. Tray specifications Source Multipurpose feeder 250-sheet label - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 140
The following table lists the maximum weights supported by the multipurpose tray. Overview of card stock and label support Paper source Multipurpose Tray Card stock Index Bristol Tag - - For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 128 g/m2 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 141
printing degradation. Optra S Optra S 1250, S 1255, S 1620, S 1625, S 1650, S 1855, S 2420, S 2450, S 2455, Se 3455 The following table lists the maximum weights supported by each of the printer trays. Print material specifications Range or maximum weight supported Print material Multipurpose - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 142
lb bond) For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Thickness: 0.102-0.305 mm (0. lb) The following table indicates the paper sizes each tray supports. Paper source specifications for all media Source 250-sheet tray 500-sheet tray - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 143
), order print cartridge P/N 1382929. If you need additional label fuser cleaners of this type (packaged separately from the print cartridge), order P/N 43H0814. If you are duplexing other jobs, do not use the special label fuser cleaner that comes with this cartridge. Printer specifications 143 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 144
are needed. Print cartridge with label fuser cleaner Print cartridge part number 1382929 PrebateTM (cartridge for special label machine use) For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 145
g/m2 Tag (100 lb) Optra T The Optra T prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print material Multipurpose feeder - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 146
first for grain short paper. For paper and transparency specifications, see the printer User's Guide. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal sizes (width x length) Source Minimum - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 147
P/N 99A0725. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 148
" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Optra W810 Limit label printing to occasional use of A4- or letter-size paper labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra W810 supports stocks up to 163 g/m2 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 149
Optra W810 treats card stock the same as Plain Paper. It does not adjust the print speed or fuser temperature when the Paper Type is set to Card Stock. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain long card stock. Printer specifications 149 - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 150
toner buildup in the fuser. Weight in pounds of a specific number of sheets of paper or stock in a standard size for that particular material. Also known as column strength. Refers to how well the material is able to support that helps the printer separate one - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 151
printer. For most Lexmark printers, the driver problems and better print quality. Paper containing fibers such as cotton have characteristics that can result in degraded paper feeding. Qualitative measurement of the adhesion of toner to the printed sheet. Printer process of melting toner "Laser-perfs - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 152
of the print material. If the paper is too rough, the toner does not fuse to the paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding problems in the printer. Smoothness is measured in Sheffield points; lower values indicate smoother paper - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 153
Vellum finish Wash boarding Zone coating A finish with a rough surface similar to eggshell and antique finishes. A vellum finish is relatively absorbent, providing good ink penetration. Waviness in the stock that gives a rippled appearance to the material; generally moisture related. Placing - Lexmark Optra Se 3455 | Card Stock & Label Guide - Page 154
fuser cleaner (Optra S) 143 labels construction 21, 19 design 23, 19 dual web forms 27 duplexing 19 integrated forms 29 printer maintenance 19 printing 19 vinyl and polyester labels 28 laser printers 7 liners 21 M maintenance thermography inks 10 topcoats 23 troubleshooting 13 V vinyl labels 23
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
 |
 |
Card Stock & Label Guide
Laser Printers
January 2011
www.lexmark.com