Lexmark Optra T616 Card Stock & Label Guide
Lexmark Optra T616 Manual
 |
View all Lexmark Optra T616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark Optra T616 manual content summary:
- Lexmark Optra T616 | Card Stock & Label Guide - Page 1
Card Stock & Label Guide Laser Printers January 2011 www.lexmark.com - Lexmark Optra T616 | Card Stock & Label Guide - Page 2
by the manufacturer, are the user's responsibility. For Lexmark technical support, visit http://support.lexmark.com. For information on supplies and downloads, visit www.lexmark.com. If you don't have access to the Internet, you can contact Lexmark by mail: Lexmark International, Inc. Bldg 004-2/CSC - Lexmark Optra T616 | Card Stock & Label Guide - Page 3
11 Maintenance procedures...13 Troubleshooting...13 Card stock 15 Weight...15 Grain orientation...16 Coatings...17 Offset powders...18 Labels...19 Label characteristics...19 Printing on labels...19 Duplexing paper labels...19 Label components...21 Label design guidelines...23 Printer specifications - Lexmark Optra T616 | Card Stock & Label Guide - Page 4
C782...49 Lexmark C790...50 Lexmark C910...52 Lexmark C912...53 Lexmark C920...55 Lexmark C925...56 Lexmark C935...58 Lexmark E120...59 Lexmark E220...61 Lexmark E230, E232, E234(n), E330, and E332n 62 Lexmark E238, E240, E240n, E340, and E342n 63 Lexmark E250, E350, and E450n...64 Lexmark E260 - Lexmark Optra T616 | Card Stock & Label Guide - Page 5
124 Lexmark X940 and X945...126 Optra plus, 4039, 4029, 4019, WinWriter 600 printers 127 Optra C...130 Optra C710...131 Optra Color 1200...133 Optra E, Ep...134 Optra E310, E312...135 Optra Es special media printer...136 Optra K 1220...137 Optra M410, M412...138 Optra N...140 Optra S...141 Optra SC - Lexmark Optra T616 | Card Stock & Label Guide - Page 6
6 - Lexmark Optra T616 | Card Stock & Label Guide - Page 7
Overview Introduction Lexmark has many years of experience in successful card stock and label testing and education programs with print material vendors and converters. This document provides guidelines to help you select appropriate print materials for the following Lexmark laser printers. Model - Lexmark Optra T616 | Card Stock & Label Guide - Page 8
. Exclusive printing of labels, for example, may result in more frequent service calls. Proper printer maintenance helps alleviate these problems. For information about maintaining your printer, see "Maintenance procedures" on page 13. Print material testing Choosing print materials can seem complex - Lexmark Optra T616 | Card Stock & Label Guide - Page 9
-lb bond. Thicker paper means less paper can be placed in a tray, and paper that is heavier and more dense may cause paper jams or feed reliability problems in some printers. Check the supported paper weights table located in the printer documentation to verify that the paper basis weight being used - Lexmark Optra T616 | Card Stock & Label Guide - Page 10
break, causing a paper jam. Tenting may increase skew, cause double-sheet feeding, or smear the toner on the print material before fusing, resulting in poor print quality. To reduce tenting, use micro-perfs. If the print material is lightly snapped as it moves through the printer, the perforations - Lexmark Optra T616 | Card Stock & Label Guide - Page 11
unauthorized (non-Lexmark) servicer • operation of a product beyond the limit of its duty cycle • failure to have installed a maintenance kit as specified (if applicable) • use of printing media outside of Lexmark specifications • use of non-Lexmark supplies (such as toner cartridges and/or inkjet - Lexmark Optra T616 | Card Stock & Label Guide - Page 12
For the following printers, make sure perforations fall outside the 0.3-0.79-inch area on the leading edge of the media: Optra S, Optra T, T520, T522, T620, T622, T630, T632, T634, T640, T642, T644, T650, T652, T654, T656dne, X203, X204, X264, X363, X364, X463, X464, X466, X543, X544, X546dtn, - Lexmark Optra T616 | Card Stock & Label Guide - Page 13
cleaning process every time you replace the black cartridge, more often with some media. Failure to follow maintenance procedures for your printer could cause jamming, poor print quality, feeding problems, and fuser problems. Troubleshooting The following table provides solutions for some common - Lexmark Optra T616 | Card Stock & Label Guide - Page 14
Solutions to printing problems Problem Solution Print on heavy stock is blurred or out of focus. Toner rubs off the page. Make sure the Paper Type setting is appropriate for your print material. (Card stock in excess of 203 g/m2 [54-lb bond] may not produce acceptable print results.) Print - Lexmark Optra T616 | Card Stock & Label Guide - Page 15
thicker and not able to make the turns in the printer paper path. This causes paper jams and sometimes causes the paper to feed incorrectly. Also, when using a laser printer, toner is pulled onto the paper through an electrical charge. If the paper is too thick, then there may not be enough voltage - Lexmark Optra T616 | Card Stock & Label Guide - Page 16
. For lighter card stocks, grain long is recommended to reduce potential curl problems. Curl may decrease the ability of the form to move reliably through the printer. Most printers feed paper short edge first. If your printer supports larger paper sizes, such as 11 x 17 in. or A3, it may feed some - Lexmark Optra T616 | Card Stock & Label Guide - Page 17
Grain direction See the individual printer specifications in "Printer specifications" on page 30 for paper, not glossy card stock, is acceptable for some printers). Paper smoothness also affects print quality. If the paper is too rough, the toner does not fuse to the paper properly; if the paper - Lexmark Optra T616 | Card Stock & Label Guide - Page 18
on the printed page right before it reaches the stacker on the offset printing press. This powder provides an intermediate layer between two sheets of paper, preventing ink from transferring from one sheet to another. Card stock 18 - Lexmark Optra T616 | Card Stock & Label Guide - Page 19
other critical problems, such as labels peeling off and causing jams in the printer, or the label or adhesive melting if the sheet stops in the fuser during a paper jam. Review label designs with a converter or vendor who is knowledgeable about labels and laser printer characteristics to ensure - Lexmark Optra T616 | Card Stock & Label Guide - Page 20
affects paper feeding and causes paper jams in the printer. We printer, thereby preventing any adhesive contamination in the printer. The following graphics show the rib locations for the Optra S, Optra T, and Lexmark T, respectively. Optra S rib locations (rib width = 2 mm): Optra T and Lexmark - Lexmark Optra T616 | Card Stock & Label Guide - Page 21
special fuser wiper. Printer Fuser wiper part number S1855, T612, T614, T520, and T522 99A1082 T620 and T622 18A1467 T630, T632 and T634 56P2109 T64x, X644e, and X646e 40X2666 T65x and X65x 40X2666 The wiper makes it possible to print on both sides of paper labels specifically designed - Lexmark Optra T616 | Card Stock & Label Guide - Page 22
liners reduce toner contamination inside the printer and improve feed performance. Slick, non-porous liners are harder to feed and increase toner buildup in the fuser and on the backup roll. Rough backings, on the other hand, can increase paper path friction, which can cause skew and paper jams. The - Lexmark Optra T616 | Card Stock & Label Guide - Page 23
printing problem is printer and cartridge contamination. The adhesives are semi-liquid and may contain volatile components. If the sheet jams in the fuser, the adhesive can melt, thereby contaminating parts of the printer or releasing fumes. To avoid exposing adhesive to the paper path guides, drive - Lexmark Optra T616 | Card Stock & Label Guide - Page 24
facestock papers. Adhesive driver edge Using cut sheet labels with adhesive applied to the edge of the sheet will contaminate your printer and your cartridge and could void your printer and cartridge Optra plus printers, 4039, 4029, and 4019, as well as the T610, T520, T620, and T630 laser printers - Lexmark Optra T616 | Card Stock & Label Guide - Page 25
Leading Edge 8.5 in. 215.9 mm Waste strip 0.25 in (6.35 mm) Non-print area 0.33 in. 8.38 mm 0.5 in. Top perforation 12.7 mm Waste strip Driver edge 11 in. 279.4 mm 0.06 in. 1.6 mm Perforation end Liner edge 0.33 in. 8.38 mm Non-print area 0.25 in. 6.35 mm Non-print - Lexmark Optra T616 | Card Stock & Label Guide - Page 26
The following diagram shows a recommended label design for the T640 and T650 laser printers. Labels 26 - Lexmark Optra T616 | Card Stock & Label Guide - Page 27
diagram shows a recommended label design for laser printers, which use a different paper picking mechanism. 0.094 in. 2.4 mm Leading Edge 8.5 in. 215.9 mm Liner edge Stripped edge 0.125 in. 3 mm Non-print area 0.79 in. 20 mm 0.33 in. 8.38 mm Top perforation Driver edge 11 in. 279.4 mm 0.06 - Lexmark Optra T616 | Card Stock & Label Guide - Page 28
may lead to labels peeling off the form inside the printer, which will require printer servicing. For more information on recommended label designs, see "Label design guidelines" on page 23. • For Optra S, Optra T, and Lexmark T printers, a leading and trailing edge stripped area is recommended to - Lexmark Optra T616 | Card Stock & Label Guide - Page 29
are non-absorbing, which leads to toner build-up in the fuser that requires special maintenance. See the documentation that came with your printer for specific information about maintaining your printer. Vinyls may require a topcoat to ensure good toner adhesion. • Polyester labels are less heat - Lexmark Optra T616 | Card Stock & Label Guide - Page 30
Printer specifications Lexmark C500n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C500n does not support vinyl or polyester labels. The Lexmark C500n supports 90-210-g/m2 (24-55-lb) stock. Card stock and labels are supported from Tray 1 and - Lexmark Optra T616 | Card Stock & Label Guide - Page 31
paper office labels designed for laser printers. The Lexmark C510 does not support vinyl or polyester labels. The Lexmark C510 supports stocks up to 176 g/m2. Feed labels from the standard tray only, which holds up to 80 sheets of labels or up to 120 sheets of card stock. The following table lists - Lexmark Optra T616 | Card Stock & Label Guide - Page 32
use of paper office labels designed for laser printers. The Lexmark C520, C522, and C524 do not support vinyl or polyester labels. The Lexmark C520, C522, and C524 support stocks up to 176 g/m2. Card stock is supported from Tray 1, Tray 2, the manual feed slot, and the multipurpose feeder. Labels - Lexmark Optra T616 | Card Stock & Label Guide - Page 33
than 200 Sheffield could result in print quality degradation. Weight: Up to 163 g/m2 Index Bristol (90 lb) Up to 163 g/m2 Tag (100 lb) Weight: Up to 176 g/m2 For more information on the supported media sizes, see the printer User's Guide on the publications CD. Printer specifications 33 - Lexmark Optra T616 | Card Stock & Label Guide - Page 34
to Card Stock. For more information, see "Pick roller technology" on page 11. Lexmark C530, C532, and C534 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C530, C532, and C534 do not support vinyl or polyester labels. Printer specifications 34 - Lexmark Optra T616 | Card Stock & Label Guide - Page 35
of card stock. The multipurpose feeder supports approximately 50 sheets of card stock or labels and the manual feed slot accepts single sheets only. The following table lists the maximum weights supported. Overview of card stock and label support Index Bristol Paper source grain long grain short - Lexmark Optra T616 | Card Stock & Label Guide - Page 36
11. Lexmark C540, C543, C544, and C546dtn Notes: • Your printer may not have a 650-sheet duo drawer with an integrated multipurpose feeder. • The 250-sheet tray (Tray 1) and the 650-sheet duo drawer support the same paper sizes and types. • Not all models are pictured. Printer specifications 36 - Lexmark Optra T616 | Card Stock & Label Guide - Page 37
of paper office labels designed for laser printers. The Lexmark C540, C543, C544, and C546dtn do not support vinyl or polyester labels. The Lexmark C540, C543, C544, and C546dtn support card stock weights up to 176 g/m2. Card stock and labels are supported from Tray 1, Tray 2, the manual feeder, and - Lexmark Optra T616 | Card Stock & Label Guide - Page 38
more information, see "Pick roller technology" on page 11. Lexmark C720 Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark C720 does not support vinyl or polyester labels. The Lexmark C720 supports stocks up to 43 lb (163 g/m2). Feed labels from - Lexmark Optra T616 | Card Stock & Label Guide - Page 39
Overview of card stock and label support Paper source Tray 1 (standard tray) Index Bristol 163 g/m2 Card stock Tag 163 g/m2 Cover - For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 163 g/m2 - Media specifications Labels Card stock Width: 105- - Lexmark Optra T616 | Card Stock & Label Guide - Page 40
, and the optional 550-sheet tray supports approximately 250 sheets of card stock. The multipurpose feeder supports approximately 50 sheets of card stock or labels. The following tables list the maximum weights supported. Overview of card stock support Paper source Standard 550-sheet tray (Tray - Lexmark Optra T616 | Card Stock & Label Guide - Page 41
facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Weight: Up to 199 g/m2 Index Bristol (110 lb) Up to 203 g/m2 Tag (125 lb) Weight: Up to 216 g/m2 (80 lb) For more information on the supported media sizes, see the printer User's Guide on - Lexmark Optra T616 | Card Stock & Label Guide - Page 42
on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. The Lexmark C750 paper feeding mechanism uses advanced technology that enhances feeding reliability. The Lexmark C750 trays, which hold approximately - Lexmark Optra T616 | Card Stock & Label Guide - Page 43
68-90°F). 4 Pressure-sensitive area must enter the printer first. For paper and transparency specifications, see the Lexmark C750 Publications CD. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length) Universal - Lexmark Optra T616 | Card Stock & Label Guide - Page 44
"Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C752 The Lexmark C752 prints on many labels designed for use with laser printers. The Lexmark C752 trays, which hold approximately 500 sheets of 75 g/m2 paper, reliably feed all supported media. The following table lists the - Lexmark Optra T616 | Card Stock & Label Guide - Page 45
215.9 x 355.6 mm (8.5 x 14 in.) 69.85 x 127 mm (2.75 in. x 5 in.) 229 x 355.6 mm (9.01 x 14 in.) * If you load paper that is narrower than 148 mm (5.83 in.) in the multipurpose feeder (for example, 3 x 5-inch index cards), set the MP Feeder Size menu item to Universal. Printer specifications 45 - Lexmark Optra T616 | Card Stock & Label Guide - Page 46
. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C760 and C762 Printer specifications 46 - Lexmark Optra T616 | Card Stock & Label Guide - Page 47
Lexmark C760 and C762 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2,000-sheet drawer supports paper only. Print material specifications Range or maximum weight - Lexmark Optra T616 | Card Stock & Label Guide - Page 48
to Card Stock in the Paper Menu. • Do not use creased card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 48 - Lexmark Optra T616 | Card Stock & Label Guide - Page 49
Lexmark C770, C772, C780, and C782 print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview of card stock support Paper - Lexmark Optra T616 | Card Stock & Label Guide - Page 50
" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark C790 Lexmark C790 prints on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Printer specifications 50 - Lexmark Optra T616 | Card Stock & Label Guide - Page 51
for laser printers. A fuser equipped with a dry web cleaner may be required for label applications to optimize feed reliability. If you print large quantities of labels or other glossy print media, then install a dry web cleaner upgrade kit (P/N 40X1856). Contact your local service representative - Lexmark Optra T616 | Card Stock & Label Guide - Page 52
for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C910 supports stocks up to 163 g/m2 (90 lb). The following table lists the maximum weights supported by the heavy media tray and the multipurpose feeder. Overview of card stock and label support Paper source - Lexmark Optra T616 | Card Stock & Label Guide - Page 53
occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C912 supports stocks up to 216 g/m2. The following table lists the maximum weights supported by the standard tray and the multipurpose feeder. Printer specifications 53 - Lexmark Optra T616 | Card Stock & Label Guide - Page 54
Overview of card stock and label support Paper source Standard tray Multipurpose feeder Card stock Index Bristol - 216 g/m2 Paper 180 g/m2 180 g/m2 Labels Vinyl - 300 g/m2 Media Specifications Labels Card stock Width: 210-216 mm (8.3-8.5 in.) Length: 279-297 mm (11-11.7 in.) Weight: 180 - Lexmark Optra T616 | Card Stock & Label Guide - Page 55
designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark C920 supports stocks up to 216 g/m2. The following table lists the maximum weights supported by the standard tray and the multipurpose feeder. Overview of card stock and label support Paper source Standard - Lexmark Optra T616 | Card Stock & Label Guide - Page 56
in the Paper Menu. Lexmark C925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The trays and the multipurpose feeder support card stock. The multipurpose feeder supports card stocks - Lexmark Optra T616 | Card Stock & Label Guide - Page 57
Overview of label support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 g/m2 Labels Vinyl Not applicable Occasional use up to 256 g/m2 Media specifications printing on labels: • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use - Lexmark Optra T616 | Card Stock & Label Guide - Page 58
of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark C935 supports card stock up to 220 g/m2. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and - Lexmark Optra T616 | Card Stock & Label Guide - Page 59
for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E120 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder - Lexmark Optra T616 | Card Stock & Label Guide - Page 60
Overview of card stock and label support Paper source Tray 1 Manual feed Card stock Index Bristol 135-163 g/m2 (up to 90 lb) 135-163 g/m2 (up to 90 lb) Labels Paper 60-163 g/m2 (16-43 lb) 60-163 g/m2 (16-43 lb) For paper and transparency specifications, see the Lexmark E220 Publications CD. - Lexmark Optra T616 | Card Stock & Label Guide - Page 61
for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E220 supports stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual sheet feeder - Lexmark Optra T616 | Card Stock & Label Guide - Page 62
Tray 1 and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Manual feed Index Bristol - 163 g/m2 Card stock Tag - 163 g/m2 Cover - - Labels Paper 90 g/m2 90 g/m2 Vinyl - - For paper and transparency specifications, see the Lexmark E230/E232/E234(n)/E330 - Lexmark Optra T616 | Card Stock & Label Guide - Page 63
of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The printer supports stocks up to 163 g/m2 (43 lb). You can load up to 50 label sheets in Tray 1. Card stock must be sent through the manual feeder one sheet at a time. The following table lists - Lexmark Optra T616 | Card Stock & Label Guide - Page 64
feeder. Overview of card stock and label support Paper source Tray 1 Index Bristol - Card Stock Tag - Cover - Tray 2 - - - Manual Feed 163 g/m2 163 g/m2 - Card stock should be grain short and set to exit the rear door. For paper and transparency specifications, refer to the printer - Lexmark Optra T616 | Card Stock & Label Guide - Page 65
and the manual sheet feeder. Overview of card stock and label support Paper source Tray 1 Index Bristol - Card Stock Tag - Tray 2 - - Manual Feed 163 g/m2 Card stock should be grain short and set to exit the rear door. 163 g/m2 For paper and transparency specifications, see the printer - Lexmark Optra T616 | Card Stock & Label Guide - Page 66
laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E320 and Lexmark E322 support stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual - Lexmark Optra T616 | Card Stock & Label Guide - Page 67
laser printers. We do not recommend using vinyl or polyester labels. The Lexmark E321 and Lexmark E323 support stocks up to 163 g/m2 (43 lb). The automatic paper feeder can hold up to 10 sheets of card stock or labels. The following table lists the maximum weights supported by Tray 1 and the manual - Lexmark Optra T616 | Card Stock & Label Guide - Page 68
in the standard tray or over 30 label sheets in the multipurpose feeder. Warning-Potential Damage: Feeding labels from print media sources that are not supported may damage your printer. For paper and transparency specifications, see the Lexmark T420 Publications CD. Printer specifications 68 - Lexmark Optra T616 | Card Stock & Label Guide - Page 69
paper jam. Partial sheets will also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge printer. • Portrait orientation is preferred, especially when printing bar codes. • Do not use labels that have exposed adhesive. • For the multipurpose feeder - Lexmark Optra T616 | Card Stock & Label Guide - Page 70
For more information, see "Maintenance procedures" on page 13. Lexmark T430 The Lexmark T430 prints on paper office labels designed for laser printers. Limit label printing to occasional use. We do not recommend using vinyl or polyester labels. The Lexmark T430 supports stocks from 60-163 g/m2 (16- - Lexmark Optra T616 | Card Stock & Label Guide - Page 71
. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Partial sheets will also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • Use labels that can withstand temperatures of 205°C (401°F) without - Lexmark Optra T616 | Card Stock & Label Guide - Page 72
information, see "Maintenance procedures" on page 13. Lexmark T520, T522 The Lexmark T520 and T522 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or - Lexmark Optra T616 | Card Stock & Label Guide - Page 73
x 5 in.) 229 x 355.6 mm (9.01 x 14 in.) * If you load paper that is narrower than 148 mm (5.83 in.) in the multipurpose feeder (for example, 3 x 5-inch index cards), set the MP Feeder Size menu item to Universal. Media specifications Labels Card stock Thickness: 0.102-0.305 mm (0.004-0.012 in - Lexmark Optra T616 | Card Stock & Label Guide - Page 74
Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T620, T622 Printer specifications 74 - Lexmark Optra T616 | Card Stock & Label Guide - Page 75
The Lexmark T620 and T622 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print Material Multipurpose feeder4 and optional - Lexmark Optra T616 | Card Stock & Label Guide - Page 76
Tray 400-Sheet Universally Adjustable Tray + Drawer Part number 11K1572 11K1573 11K1574 11K1878 11K1921 11K1922 11K1941 11K1942 Card stock and label guidelines Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be used for label applications to - Lexmark Optra T616 | Card Stock & Label Guide - Page 77
page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark T630, T632, T634 The Lexmark T630, T632, and T634 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Printer - Lexmark Optra T616 | Card Stock & Label Guide - Page 78
.) 215.9 x 355.6 mm (8.5 x 14 in.) 69.85 x 127 mm (2.75 x 5 in.) 229 x 355.6 mm (9.01 x 14 in.) * If you load paper that is narrower than 148 mm (5.83 in.) in the multipurpose feeder (for example, 3 x 5-inch index cards), set the MP Feeder Size menu item to Universal. Printer specifications 78 - Lexmark Optra T616 | Card Stock & Label Guide - Page 79
Tray 400-Sheet Universally Adjustable Tray + Drawer Part number 11K1572 11K1573 11K1574 11K1878 11K1921 11K1922 11K1941 11K1942 Card stock and label guidelines Labels are one of the most difficult print materials for laser printers. A special fuser cleaner should be used for label applications to - Lexmark Optra T616 | Card Stock & Label Guide - Page 80
Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 80 - Lexmark Optra T616 | Card Stock & Label Guide - Page 81
, T644 The Lexmark T640, T642, and T644 print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support Card stock Labels Grain Index Dual-web Paper source - Lexmark Optra T616 | Card Stock & Label Guide - Page 82
40X2665. When you order a new cartridge, be sure to order the cartridge that will include the correct fuser cleaner. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters have - Lexmark Optra T616 | Card Stock & Label Guide - Page 83
page 13 • "Troubleshooting" on page 13 Lexmark T650, T652, T654, and T656dne The Lexmark T650, T652, T654, and T656dne print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock - Lexmark Optra T616 | Card Stock & Label Guide - Page 84
Universally Adjustable Tray + Drawer 200-Sheet Mild Special Media Tray 200-Sheet Mild Special Media Tray + Drawer 200-Sheet Universally Adjustable Tray 200-Sheet Universally Adjustable Tray + Drawer Part number 30G0932 30G0933 30G0836 30G0890 30G0891 30G0872 30G0871 Printer specifications 84 - Lexmark Optra T616 | Card Stock & Label Guide - Page 85
. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When feeding labels, the - Lexmark Optra T616 | Card Stock & Label Guide - Page 86
• "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark W812 The Lexmark W812 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Overview of card stock and label support - Lexmark Optra T616 | Card Stock & Label Guide - Page 87
.7 in.) Up to 163 g/m2 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W820 supports stocks up to 163 g/m2. Always feed labels and card stock from Tray 1, 2, or 3, each of - Lexmark Optra T616 | Card Stock & Label Guide - Page 88
letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W840 supports stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2, or the multipurpose feeder. The following table lists the maximum weights supported by - Lexmark Optra T616 | Card Stock & Label Guide - Page 89
Media specifications Labels Card stock Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: 64- manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver - Lexmark Optra T616 | Card Stock & Label Guide - Page 90
the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark W850 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W850 supports - Lexmark Optra T616 | Card Stock & Label Guide - Page 91
volatile components into the printer. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Printer specifications 91 - Lexmark Optra T616 | Card Stock & Label Guide - Page 92
Lexmark X203n and X204n printer models support stocks up to 90 g/m2 (24 lb). Note: The smallest supported Universal size is 76 x 127 mm (3 x 5 in.); the largest is 216 x 356 mm (8.5 x 14 in.). The following table lists the maximum weights supported by the paper tray and the manual feeder. Overview - Lexmark Optra T616 | Card Stock & Label Guide - Page 93
X215 The Lexmark X215 prints on paper office labels designed for use with laser printers. Labels can be fed only from the manual bypass feeder. Card stock and labels must be fed one sheet at a time through the manual bypass feeder. The following table lists the maximum weights supported by the - Lexmark Optra T616 | Card Stock & Label Guide - Page 94
Overview of card stock support Card stock Paper source Index Bristol Manual bypass feeder* Up to 163 g/m2 (90 lb) * Card stock can be fed only from the manual bypass feeder. Tag Up to 163 g/m2 (100 lb) For paper and transparency specifications, see the Lexmark X215 User's Guide. Cover - - Lexmark Optra T616 | Card Stock & Label Guide - Page 95
components into the printer. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Lexmark X264dn, X363dn, X364dn - Lexmark Optra T616 | Card Stock & Label Guide - Page 96
250-sheet tray Optional 550-sheet tray Manual feeder Multipurpose feeder - 163 g/m2 - 163 g/m2 Card stock should be grain short and set to exit the rear door. For paper and transparency specifications, see the printer publications CD. Cover - - - Labels Paper 90 g/m2 90 g/m2 90 g/m2 Media - Lexmark Optra T616 | Card Stock & Label Guide - Page 97
, see "Maintenance procedures" on page 13. Lexmark X422 The Lexmark X422 prints on many labels designed for use with laser printers. Card stock is supported from the multipurpose feeder, and labels are supported from the standard tray. The following table lists the maximum weights supported. Note - Lexmark Optra T616 | Card Stock & Label Guide - Page 98
components into the printer. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain short card stock. • Load card stock into the multipurpose feeder with the recommended print side faceup and the top edge going in first. Lexmark X463de, X464de, X466dte - Lexmark Optra T616 | Card Stock & Label Guide - Page 99
10 sheets of card stock in the multipurpose feeder. The following table lists the maximum weights supported by the standard tray, optional 250- and 550-sheet trays, and multipurpose and manual feeders. Overview of card stock and label support Paper source Standard tray Index Bristol - Card Stock - Lexmark Optra T616 | Card Stock & Label Guide - Page 100
. For more information, see "Maintenance procedures" on page 13. Lexmark X500 and X502n Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark X500 and X502n do not support vinyl or polyester labels. The Lexmark X500 and X502n support 90-210 g/m2 (24 - Lexmark Optra T616 | Card Stock & Label Guide - Page 101
, see the printer User's Guide on the publications CD. Lexmark X543, X544, and X546dtn Limit label printing to occasional use of paper office labels designed for use with laser printers. Lexmark X543, X544, and X546dtn do not support vinyl or polyester labels. The following table lists the maximum - Lexmark Optra T616 | Card Stock & Label Guide - Page 102
can cause feeding problems. • Use only letter-, A4-, or legal-size full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When printing - Lexmark Optra T616 | Card Stock & Label Guide - Page 103
X560 The Lexmark X560 prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card stock - Lexmark Optra T616 | Card Stock & Label Guide - Page 104
not use card stock that is creased. It may cause paper jams. Lexmark X642e The Lexmark X642e prints on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not - Lexmark Optra T616 | Card Stock & Label Guide - Page 105
grain long) feeder* (grain Lexmark X642e paper feeding mechanism uses advanced technology that enhances feeding reliability. The standard Lexmark X642e tray holds 250 or 500 sheets of bond paper supported Part number 20G1237 20G1230 20G1236 20G1229 20G1224 20G1223 20G1240 Printer specifications 105 - Lexmark Optra T616 | Card Stock & Label Guide - Page 106
Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 106 - Lexmark Optra T616 | Card Stock & Label Guide - Page 107
The Lexmark X644e and X646e print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Note: Scanning large quantities of labels is not recommended. Overview of card stock and label support Card - Lexmark Optra T616 | Card Stock & Label Guide - Page 108
yield print cartridge. It is possible to duplex certain labels that have been specifically designed for this application. To duplex labels, consult the Lexmark "Converter Lists" to see which converters have successfully developed this type of label, and you must install a special fuser wiper. The - Lexmark Optra T616 | Card Stock & Label Guide - Page 109
16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Lexmark X651de, X652de, X654de, X656de, and X658de The Lexmark X651de, X652de, X654de, X656de, and X658de print on many labels designed for use with laser printers. The following table lists the maximum weights supported by the - Lexmark Optra T616 | Card Stock & Label Guide - Page 110
g/m2 Multipurpose grain long feeder* grain short 120 g/m2 Lexmark X651de, X652de, X654de, X656de, and X658de paper feeding mechanism uses advanced technology that enhances feeding reliability. The standard Lexmark supported from a 400-sheet universally adjustable tray. Printer specifications 110 - Lexmark Optra T616 | Card Stock & Label Guide - Page 111
. Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. When feeding labels, the - Lexmark Optra T616 | Card Stock & Label Guide - Page 112
Stock in the Paper Menu. • Do not use card stock that is creased. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Grain orientation" on page 16 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications 112 - Lexmark Optra T616 | Card Stock & Label Guide - Page 113
. Tray 1, the optional 550-sheet tray, and the specialty media tray support approximately 250 sheets of card stock or labels. The following tables list the maximum weights supported. Overview of card stock support Paper source Standard 550-sheet tray (Tray 1) Optional 550-sheet tray Optional 550 - Lexmark Optra T616 | Card Stock & Label Guide - Page 114
facestock paper. Using media higher than 200 Sheffield could result in print quality degradation. Weight: Up to 199 g/m2 Index Bristol (110 lb) Up to 203 g/m2 Tag (125 lb) Weight: Up to 216 g/m2 (80 lb) For more information on the supported media sizes, see the printer User's Guide on - Lexmark Optra T616 | Card Stock & Label Guide - Page 115
Lexmark X782 The Lexmark X782 can print on many labels designed for use with laser printers. The following tables list the maximum weights supported by the trays and the multipurpose feeder. Note: The optional 2000-sheet drawer supports plain and glossy paper. Overview of card stock support Paper - Lexmark Optra T616 | Card Stock & Label Guide - Page 116
printer control panel, set Paper Type to Card Stock in the Paper Menu. • Do not use creased card stock. It may cause paper jams. For more information, see the following: • "Pick roller technology" on page 11 • "Maintenance procedures" on page 13 • "Troubleshooting" on page 13 Printer specifications - Lexmark Optra T616 | Card Stock & Label Guide - Page 117
Lexmark X790 Lexmark X790 supports card stock and labels from the standard 550-sheet tray, an optional 550-sheet tray, and the multipurpose feeder. Note: The optional 2,000-sheet drawer does not support card stock or labels. Overview of card stock support Paper source Standard and optional 550- - Lexmark Optra T616 | Card Stock & Label Guide - Page 118
. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Partial sheets will also contaminate your printer and your cartridge with adhesive, and could void your printer and cartridge warranties. • Use labels that can withstand temperatures of 180°C (356°F) without - Lexmark Optra T616 | Card Stock & Label Guide - Page 119
the leading and driver edge, and printer first. Lexmark X850, X852e, and X854e Limit label printing to occasional use of paper office labels designed for laser printers. Paper labels are supported in Tray 1, Tray 2, and the manual bypass feeder. The following table lists the maximum weights supported - Lexmark Optra T616 | Card Stock & Label Guide - Page 120
Overview of card stock and label support Tray 1 Labels Card stock 64-105 g/m2 64-105 g/m2 Tray 2 64-216 g/m2 64-216 g/m2 Multipurpose feeder 64-216 g/m2 64-216 g/m2 Media specifications Labels Card stock Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: 64-216 g/m2 - Lexmark Optra T616 | Card Stock & Label Guide - Page 121
- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark X860e, X862e, and X864e support stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2 or the multipurpose feeder. The following table lists the maximum - Lexmark Optra T616 | Card Stock & Label Guide - Page 122
Media specifications Labels Card stock Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: 64- manual bypass feeder with the recommended print side faceup and the top edge going in first. When printing on card stock: • Set the Paper Type to Card Stock from the printer driver - Lexmark Optra T616 | Card Stock & Label Guide - Page 123
• We recommend the use of grain short card stock. • Load card stock into the manual bypass feeder with the recommended print side faceup and the top edge going in first. Printer specifications 123 - Lexmark Optra T616 | Card Stock & Label Guide - Page 124
Lexmark X925 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Trays and the multipurpose feeder support card stock. The multipurpose feeder supports card stocks up to 256 g/m2. Always - Lexmark Optra T616 | Card Stock & Label Guide - Page 125
Overview of label support Paper source Standard 150-sheet tray Multipurpose feeder Paper 131 g/m2 131 g/m2 Labels Vinyl Not applicable Occasional use up to 256 g/m2 Media specifications Labels Card stock Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: 120-128 g/m2 - Lexmark Optra T616 | Card Stock & Label Guide - Page 126
X940 and X945 Limit label printing to occasional use of A4- or letter-size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. Lexmark X940 and X945 support stocks up to 220 g/m2. Always feed labels and card stock from Tray 1, 2, or 3. We recommend - Lexmark Optra T616 | Card Stock & Label Guide - Page 127
. It may cause paper jams. Optra plus, 4039, 4029, 4019, WinWriter 600 printers The following table lists the maximum weights supported by each of the special card stock and label trays, as well as the manual feed tray. Overview of card stock and label support Paper source 200-sheet heavy duty - Lexmark Optra T616 | Card Stock & Label Guide - Page 128
. See your printer documentation for additional specifications. Estimated tray capacities for labels Label material Paper, dual web Vinyl, polyester 200-sheet heavy duty tray 125 sheets 70 sheets 500-sheet card stock & label tray 250 sheets 200 sheets The following table lists the print - Lexmark Optra T616 | Card Stock & Label Guide - Page 129
media Upper and Lower: All supported media 1 Select the appropriate tray according to the part of the form (pressure-sensitive area or paper base) that enters the printer first when feeding from the tray. 2 Grain long is recommended. Media specifications Labels Card stock Thickness: 0.102 - Lexmark Optra T616 | Card Stock & Label Guide - Page 130
cartridge, more often with some media. Failure to follow maintenance procedures could cause jamming, poor print quality, feeding problems, and fuser problems. Additional maintenance for Optra plus, Optra, 4039 12C (with serial numbers after BC143), and 4039 10 plus printers • If your laser printer - Lexmark Optra T616 | Card Stock & Label Guide - Page 131
specifications, see the printer User's Guide. Optra C710 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Optra C710 supports stocks up to 163 g/m2 (90 lb). Feed labels from the multipurpose feeder - Lexmark Optra T616 | Card Stock & Label Guide - Page 132
labels. Acceptable labels Unacceptable labels • From the operator panel or from MarkVision Professional, set the Paper Type to Labels. • Do not print a large number of labels continuously. • Do . • For the best print quality, always set the Paper Type to Card Stock. Printer specifications 132 - Lexmark Optra T616 | Card Stock & Label Guide - Page 133
table lists the maximum weights supported by the multipurpose feeder. Overview of card stock and label support Paper source Multipurpose feeder Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 135 - Lexmark Optra T616 | Card Stock & Label Guide - Page 134
table lists the maximum weights supported by Tray 1 and the manual feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 163 g/m2 163 g/m2 Card stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide - Lexmark Optra T616 | Card Stock & Label Guide - Page 135
automatic paper feeder and the multipurpose feeder. Overview of card stock and label support Paper Source Automatic Paper Feeder Manual Sheet Feeder Index Bristol 163 g/m2 163 g/m2 Card Stock Tag 163 g/m2 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Lexmark Optra T616 | Card Stock & Label Guide - Page 136
1 and the manual feed slot. Overview of card stock and label support Paper source Tray 1 Manual feed slot Index Bristol 199 g/m2 199 g/m2 Card stock Tag 163 g/m2 163 g/m2 Cover 176 g/m2 176 g/m2 For paper and transparency specifications, see the printer User's Guide. Labels Paper Vinyl 180 - Lexmark Optra T616 | Card Stock & Label Guide - Page 137
, see "Maintenance procedures" on page 13. Optra K 1220 Limit label printing to occasional use of paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels or any card stock with the Optra K 1220 printer. Always feed labels from the manual feed tray - Lexmark Optra T616 | Card Stock & Label Guide - Page 138
Overview of card stock and label support Paper source Multipurpose feeder Manual feed tray Card stock Index Bristol Tag - - - - For paper and transparency specifications, see the printer User's Guide. Media specifications Labels Width: Length: Weight: 210-216 mm (8.3-8.5 in.) 279-356 mm - Lexmark Optra T616 | Card Stock & Label Guide - Page 139
to feed paper; it does not support card stock and label printing. You can try occasional label printing from Tray 1, but we recommend you use the multipurpose feeder. For paper and transparency specifications, see the printer User's Guide. Tray specifications Source Multipurpose feeder 250-sheet - Lexmark Optra T616 | Card Stock & Label Guide - Page 140
lists the maximum weights supported by the multipurpose tray. Overview of card stock and label support Paper source Multipurpose Tray Card stock Index Bristol Tag - - For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 128 g/m2 Vinyl - Printer - Lexmark Optra T616 | Card Stock & Label Guide - Page 141
2455, Se 3455 The following table lists the maximum weights supported by each of the printer trays. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and optional 250-sheet and 500-sheet trays 250-sheet drawer Paper (grain long) Xerographic or - Lexmark Optra T616 | Card Stock & Label Guide - Page 142
short paper. Multipurpose feeder and optional 250-sheet drawer 163 g/m2 (43 lb bond) 163 g/m2 (43 lb bond) 260 g/m2 (78 lb liner) 220 g/m2 (59 lb bond) 140 to 175 g/m2 75-135 g/m2 (20-36 lb bond) For paper and transparency specifications, see the printer User's Guide. Media specifications Labels - Lexmark Optra T616 | Card Stock & Label Guide - Page 143
supports all paper weights and types that the printer supports, except for transparencies and envelopes. Duplexing of specially designed labels is supported in the Optra S1855 printer. You may notice skew or print registration problems if you feed materials over 135 g/m2 from the multipurpose feeder - Lexmark Optra T616 | Card Stock & Label Guide - Page 144
table lists the maximum weights supported by the multipurpose feeder. Overview of card stock and label support Paper source Multipurpose feeder Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 163 - Lexmark Optra T616 | Card Stock & Label Guide - Page 145
use with laser printers. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Print material specifications Range or maximum weight supported Print material Multipurpose feeder and 250-sheet and 500-sheet trays optional 250-sheet drawer Paper (grain - Lexmark Optra T616 | Card Stock & Label Guide - Page 146
. 2 Pressure-sensitive area must enter the printer first for grain short paper. For paper and transparency specifications, see the printer User's Guide. The following table indicates the paper sizes each tray supports. Paper source specifications for all media Standard sizes (width x length - Lexmark Optra T616 | Card Stock & Label Guide - Page 147
Combining print materials can cause feeding problems. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. Adhesive material may contaminate your printer. It could also void your printer and cartridge warranties. Printer specifications 147 - Lexmark Optra T616 | Card Stock & Label Guide - Page 148
stock. The following table lists the maximum weights supported by Tray 1. Overview of card stock and label support Paper source Tray 1 Index Bristol 163 g/m2 Card stock Tag 163 g/m2 For paper and transparency specifications, see the printer User's Guide. Cover - Labels Paper 163 g/m2 Vinyl - Lexmark Optra T616 | Card Stock & Label Guide - Page 149
. The Optra W810 treats card stock the same as Plain Paper. It does not adjust the print speed or fuser temperature when the Paper Type is set to Card Stock. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain long card stock. Printer specifications 149 - Lexmark Optra T616 | Card Stock & Label Guide - Page 150
spring that allows the printer to automatically adjust the Toner contamination of the fuser's backup roll. Particularly applies to vinyl, plastic, and paper labels. Slick backings are harder to feed and increase toner buildup in the fuser. Weight in pounds of a specific number of sheets of paper - Lexmark Optra T616 | Card Stock & Label Guide - Page 151
a fixed reference for feeding paper through the paper path (as opposed to printers that center paper in the path), the edge of the print material that is positioned next to the hardware reference and that is driven by the rollers in the printer. For most Lexmark printers, the driver edge is the left - Lexmark Optra T616 | Card Stock & Label Guide - Page 152
The degree of smoothness of the print material. If the paper is too rough, the toner does not fuse to the paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding problems in the printer. Smoothness is measured in Sheffield points; lower values indicate - Lexmark Optra T616 | Card Stock & Label Guide - Page 153
Vellum finish Wash boarding Zone coating A finish with a rough surface similar to eggshell and antique finishes. A vellum finish is relatively absorbent, providing good ink penetration. Waviness in the stock that gives a rippled appearance to the material; generally moisture related. Placing - Lexmark Optra T616 | Card Stock & Label Guide - Page 154
codes 10, 16 cut sheet paper labels 23 D debossing fuser cleaner (Optra S) 143 labels construction 21, 19 design 23, 19 dual web forms 27 duplexing 19 integrated forms 29 printer maintenance 19 printing 19 vinyl and polyester labels 28 laser printers 7 liners 21 M maintenance 23 troubleshooting 13
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
 |
 |
Card Stock & Label Guide
Laser Printers
January 2011
www.lexmark.com