Lexmark Prospect Pro200 User's Guide

Lexmark Prospect Pro200 Manual

Get Lexmark Prospect Pro200 PDF manuals and user guides View all Lexmark Prospect Pro200 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark Prospect Pro200 manual content summary:

  • Lexmark Prospect Pro200 | User's Guide - Page 1
    Prospect Pro200 Series User's Guide November 2010 Machine type(s): 4443 Model(s): 2W2, 2WE, 2Wn, 2nE www.lexmark.com
  • Lexmark Prospect Pro200 | User's Guide - Page 2
    Lexmark ink cartridges...12 Replacing ink cartridges...13 Ordering paper and other supplies...14 Recycling Lexmark products...15 Using the printer control panel buttons and menus 16 Using the printer control panel...16 Changing temporary settings into new default settings 18 Changing the Power
  • Lexmark Prospect Pro200 | User's Guide - Page 3
    or memory card 62 Scanning photos into an editing application 62 Scanning documents into an editing application 64 Scanning directly to e-mail using the printer software 64 Scanning to a PDF...65 Scanning FAQ...66 Canceling scan jobs...67 Faxing...68 Setting up the printer to fax...68 Contents 3
  • Lexmark Prospect Pro200 | User's Guide - Page 4
    faxes...84 Faxing FAQ...85 Networking 92 Installing the printer on a wireless network 92 Advanced wireless setup...97 Networking FAQ...103 Maintaining the printer 115 Maintaining ink cartridges...115 Cleaning the exterior of the printer...117 Cleaning the scanner glass...118 Troubleshooting
  • Lexmark Prospect Pro200 | User's Guide - Page 5
    cables from the printer before proceeding. CAUTION-SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the fax feature, power cord, or telephone, during a lightning storm. SAVE THESE INSTRUCTIONS. Safety
  • Lexmark Prospect Pro200 | User's Guide - Page 6
    . To start using your new printer right away, use the setup materials that came with the printer, and then skim the User's Guide to learn how to perform basic tasks. To get the most out of your printer, read the User's Guide carefully, and make sure you check the latest updates on our Web site. We
  • Lexmark Prospect Pro200 | User's Guide - Page 7
    about the printer Publications What are you looking for? Initial setup instructions: • Connecting the printer • Installing the printer software Find it here Setup documentation The setup documentation came with the printer and is also available on the Lexmark Web site at http://support.lexmark.com
  • Lexmark Prospect Pro200 | User's Guide - Page 8
    • Documentation • Driver downloads • Live chat support • E-mail support Telephone support Find it here User's Guide The User's Guide is available on the installation software CD. For updates, check our Web site at http://support.lexmark.com. Windows or Mac Help Open a printer software program or
  • Lexmark Prospect Pro200 | User's Guide - Page 9
    came with your printer. Understanding the parts of the printer 12 11 10 14 13 1 2 9 8 WI F I PRINTING 3 7 WI F I PRINTING 4 6 5 Use the To 1 Paper support Load paper. 2 Paper guide adjustment lever Adjust the paper guides. 3 Wi-Fi indicator Check wireless status. 4 Memory card
  • Lexmark Prospect Pro200 | User's Guide - Page 10
    Scanner glass Scan and copy photos and documents. 3 Power supply with port Connect the printer to a properly grounded electrical outlet that is near and printer and the telephone line. Use this port if you do not have a dedicated fax line for the printer, and if this connection method is supported
  • Lexmark Prospect Pro200 | User's Guide - Page 11
    and receive faxes. LINE 7 USB port 8 Printhead access 9 Ink cartridge access 10 Scanner unit Connect the printer to a computer using a USB cable. Warning-Potential Damage: Do not touch the USB port except when plugging in or removing a USB cable or installation cable. Install the printhead. Note
  • Lexmark Prospect Pro200 | User's Guide - Page 12
    Ordering and replacing supplies Ordering ink cartridges Page yields available at www.lexmark.com/pageyields. For best results, use only Lexmark ink cartridges. Lexmark Pro200 Series models (except Lexmark Pro208) Item Return Program Cartridge1 Regular cartridge2 Black cartridge 100 100A High
  • Lexmark Prospect Pro200 | User's Guide - Page 13
    by non-Lexmark ink or ink cartridges. Replacing ink cartridges Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out. 1 Turn on your printer. 2 Open the
  • Lexmark Prospect Pro200 | User's Guide - Page 14
    hands to install the black cartridge. Note: Install the new ink cartridges immediately after removing the protective cap to avoid exposing the ink to air. 6 Close the printer. Ordering paper and other supplies To order supplies or to locate a dealer near you, visit our Web site at www.lexmark.com
  • Lexmark Prospect Pro200 | User's Guide - Page 15
    type you want to recycle, and then select your country or region from the list. 3 Follow the instructions on the computer screen. Note: Printer supplies and hardware not listed in a Lexmark collection program may be recycled through your local recycling center. Contact your local recycling center to
  • Lexmark Prospect Pro200 | User's Guide - Page 16
    buttons and menus Using the printer control panel 1 2 34 5 6 Use the 1 Power button 2 Copy button 3 Scan button 4 Fax button 5 Photo button 6 Back button 7 Select button 10 9 8 7 To • Turn the printer on and off. • Switch to Power Saver mode. Note: When the printer is on, press to switch
  • Lexmark Prospect Pro200 | User's Guide - Page 17
    Power Saver mode. • Printer status • Messages • Menus 10 Setup button Access the setup menu and change printer settings. Note: The Copy, Scan, Fax the last five numbers dialed. Dial the telephone number manually using the keypad before sending the fax. Switch to color mode or black-and-white mode
  • Lexmark Prospect Pro200 | User's Guide - Page 18
    Fax, Photo, or File Print menu to the top level of a menu. • Exit from a menu level of the Setup menu to the top level of the previous mode. • Clear current settings or error after two minutes of inactivity or after you turn off the printer, but they will return to the factory default settings when
  • Lexmark Prospect Pro200 | User's Guide - Page 19
    you exit Setup, or press another mode button. Changing the Power Saver timeout The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left idle. The Power Saver feature optimizes energy efficiency by reducing the printer power consumption (as
  • Lexmark Prospect Pro200 | User's Guide - Page 20
    Power Saver mode after ten minutes. • The printer prints on both sides of the paper (duplex) for copy and fax jobs, and for printing in Windows and Mac OS X 10.6 or later (selected models only). To enable Eco-Mode, press the 2-Sided/Eco-Mode button until the light near "Eco-Mode" comes on. Resetting
  • Lexmark Prospect Pro200 | User's Guide - Page 21
    and 11.0 (Web only)* • Linux Fedora 10 (Web only)* * The printer driver for this operating system is available only at http://support.lexmark.com. Using the Windows printer software Software installed during printer installation When you set up the printer using the installation software CD, all the
  • Lexmark Prospect Pro200 | User's Guide - Page 22
    ) Lexmark Service Center (referred to as Service Center) To • Launch applications or programs. • Access the Fax Solutions software. • Scan or e-mail a photo or document. • Edit scanned documents. • Scan documents to PDF. • Adjust settings for the printer. • Order supplies. • Maintain ink cartridges
  • Lexmark Prospect Pro200 | User's Guide - Page 23
    access the Print dialog. • Access the printer utility. • Troubleshoot. • Order ink or supplies. • Contact Lexmark. • Check the printer software version installed on the computer. • Scan photos and documents. • Customize settings for scan jobs. • Customize settings for fax jobs. • Create and edit the
  • Lexmark Prospect Pro200 | User's Guide - Page 24
    Get help with cartridge installation. • Print a test page. • Print an alignment page. • Clean the printhead nozzles. • Order ink or supplies. • Register the printer. • Contact technical support. Wireless Setup Assistant (in Mac OS X version 10.6) Set up the printer on a wireless network. or Note
  • Lexmark Prospect Pro200 | User's Guide - Page 25
    10.6 1 From the Finder, navigate to: Applications > select your printer folder > Web Links > Lexmark Software Updates 2 From the Web site, select your printer and then download the driver. 3 Install additional or optional software. In Mac OS X version 10.5 or earlier 1 From the Finder desktop
  • Lexmark Prospect Pro200 | User's Guide - Page 26
    for Software Updates 4 Follow the instructions on the computer screen. For Macintosh users In Mac OS X version 10.6 1 From the Finder, navigate to: Applications > select your printer folder > Web Links > Lexmark Software Updates 2 From the Web site, select your printer and then download the driver
  • Lexmark Prospect Pro200 | User's Guide - Page 27
    the instructions on the installation dialog. Using the Internet 1 Go to the Lexmark Web site at www.lexmark.com. 2 Navigate to: Downloads > Driver Finder > select your printer > select your operating system 3 Download the driver and install the printer software. Note: Updated printer software may
  • Lexmark Prospect Pro200 | User's Guide - Page 28
    edges of the paper. WI F I PRINTING Note: Do not force paper into the printer. The paper should be flat against the paper support, and the edges should be flush against both paper guides. 4 From the printer control panel, select or confirm your paper settings. Loading paper and original documents 28
  • Lexmark Prospect Pro200 | User's Guide - Page 29
    paper. • You remove all paper from the paper support before inserting banner paper. • You use banner paper designed for inkjet printers. • You place a stack of banner paper on or behind the printer, and feed in the first sheet. • The paper guides rest against the edges of the paper. • You select
  • Lexmark Prospect Pro200 | User's Guide - Page 30
    not listed, and set the left and right margins so your envelope is correctly positioned. • The print side of the label is faceup. • The paper guides rest against the edges of the paper. • You select Automatic, Normal, or Photo print quality. Note: Draft mode is available but is not recommended for
  • Lexmark Prospect Pro200 | User's Guide - Page 31
    You follow the loading instructions on the iron-on transfer packaging. • The print side of the transfer is faceup. • The paper guides rest against the default paper size for the printer, and then press . • If you want to set the default paper type: a Press to select Paper Setup. b Press the up or
  • Lexmark Prospect Pro200 | User's Guide - Page 32
    You can load up to 35 sheets of an original document into the ADF for scanning, copying, and faxing. You can load A4-, letter-, or legal-size paper into the ADF. 1 Adjust the paper guide on the ADF tray to the width of the original document. 2 Load the original document faceup and
  • Lexmark Prospect Pro200 | User's Guide - Page 33
    quality for better prints. • Make sure there is enough ink in the ink cartridges. • Remove each sheet as it is printed when printing any printer software dialogs. 5 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the Page Setup dialog, set the printer,
  • Lexmark Prospect Pro200 | User's Guide - Page 34
    to print, and then select Collate Copies. 5 Click OK to close any printer software dialogs. 6 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the Page Setup dialog, set the printer, paper size, and orientation. 3 Click OK. 4 From the menu bar, choose
  • Lexmark Prospect Pro200 | User's Guide - Page 35
    you must first disable two-sided printing. 4 Click OK to close any printer software dialogs. 5 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the Page Setup dialog, set the printer, paper size, and orientation. 3 Click OK. 4 From the menu bar, choose
  • Lexmark Prospect Pro200 | User's Guide - Page 36
    supported by the printer. For more information, see "Supported memory cards and file types" on page 40. • The computer must contain applications that support document. If the printer is using a Wireless connection (selected models printer software associated with your operating system. Printing 36
  • Lexmark Prospect Pro200 | User's Guide - Page 37
    a custom size. 5 Select an orientation. 6 Click OK to close any printer software dialogs. 7 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the "Format for" pop-up menu, choose your printer. 3 From the Paper Size pop-up menu, choose your envelope size
  • Lexmark Prospect Pro200 | User's Guide - Page 38
    printer software dialogs. 6 Click OK or Print. For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the "Format for" pop-up menu, choose your printer the edge of the label sheet. • Make sure the paper guide or paper guides rest against the edges of the label sheet. • Use full
  • Lexmark Prospect Pro200 | User's Guide - Page 39
    With a document open, choose File > Page Setup. 2 From the "Format for" pop-up menu, choose your printer. 3 From the Paper Size pop-up menu it. • Make sure that the memory card inserted is supported by the printer. For more information, see "Supported memory cards and file types" on page 40. • The
  • Lexmark Prospect Pro200 | User's Guide - Page 40
    to choose which memory device to use. Supported memory cards and file types Memory Card PRO Duo (with adapter) Images: • xD-Picture Card • JPEG • xD-Picture Card (Type H) • TIFF • xD-Picture Card (Type M) Printing photos using the printer control panel 1 Load photo paper. 2 From the printer
  • Lexmark Prospect Pro200 | User's Guide - Page 41
    least 24 hours before stacking, displaying, or storing. Editing photos using the printer control panel 1 Load photo paper. 2 Insert a memory card or flash stored on the memory device, then press to select Photos. 3 From the printer control panel, press to select Select and Print. 4 Press the left
  • Lexmark Prospect Pro200 | User's Guide - Page 42
    or storing. Printing photos from a memory device using the printer software 1 Load photo paper. 2 From the printer control panel, press . 3 Insert a memory card the instructions on the computer screen to transfer the photos to the computer or to print. If the printer is using a Wireless connection
  • Lexmark Prospect Pro200 | User's Guide - Page 43
    camera USB selection is incorrect, then the camera is detected as a flash drive, or an error message is displayed on the printer control panel. For more information, see the camera documentation. • The printer reads only one memory device at a time. WI F I PRINTING Warning-Potential Damage: Do not
  • Lexmark Prospect Pro200 | User's Guide - Page 44
    want to print. Press each time you make a selection. Note: The printer will use the default print settings unless you change the print settings from save your selections. 6 Press . The proof sheet prints. 7 Follow the instructions on the proof sheet to select which photos to print, the number of
  • Lexmark Prospect Pro200 | User's Guide - Page 45
    PC PDA, additional third-party software and drivers are required. For more information about the required software, see the documentation for your PDA. Setting up a connection between your printer and a Bluetooth-enabled device Note: The printer does not support printing files from your computer
  • Lexmark Prospect Pro200 | User's Guide - Page 46
    more than eight devices, the least recently used device is removed from the list. You need to repeat the setup of the deleted device to be able to send a print job to the printer. Note: You need to set up a connection for each Bluetooth device that you use to send a print job
  • Lexmark Prospect Pro200 | User's Guide - Page 47
    is not included with the printer. 2 From the printer control panel, press . 3 Press the up or down arrow button to scroll to Bluetooth Setup, and then press button . -enabled device Note: The printer does not support printing files from your computer using a Bluetooth connection. Printing 47
  • Lexmark Prospect Pro200 | User's Guide - Page 48
    , available only on select printer models, supports A4- and letter-size paper. If you purchased a model without automatic duplex, or if you need to print duplex using other paper sizes, then see the instructions for printing on both sides of the paper (duplexing) manually. For Windows users 1 With
  • Lexmark Prospect Pro200 | User's Guide - Page 49
    software dialogs. 6 Click OK or Print. To return to single-sided printing, navigate to: Advanced tab > 2-Sided Printing area > select Off For Macintosh users 1 With a document open, choose File > Page Setup. 2 From the Page Setup dialog, set the printer, paper size, and orientation. 3 Click OK
  • Lexmark Prospect Pro200 | User's Guide - Page 50
    Setting the duplex printing dry time (Macintosh only) In Mac OS X version 10.6 1 From the Apple menu, navigate to: System Preferences > Print & Fax > select your printer > Open Print Queue > Printer Setup > Driver 2 From the Two-Sided Printing Dry Time pop-up menu, choose a dry time setting. Note:
  • Lexmark Prospect Pro200 | User's Guide - Page 51
    6 Flip and reload the paper, following the directions on the instruction sheet to complete the print job. 3 2 W I F I PRINTING 1 Note: To return to single-sided printing, return to the Advanced tab. From the 2-Sided Printing section, select
  • Lexmark Prospect Pro200 | User's Guide - Page 52
    print job. If you have to manually select your printer, then it is not the default printer. To set the default printer: For Windows users 1 Click , Fax 2 Select the printer from the Default Printer pop-up menu, or select the printer and click Make Default. Changing the printing mode To conserve ink
  • Lexmark Prospect Pro200 | User's Guide - Page 53
    , Options, or Setup. 3 Select Automatic, Quick Print, Normal, or Best. Note: Printing in Draft or Quick Print mode uses less ink and is ideal for printing text documents. For Macintosh users 1 With a document open, choose File > Print. 2 From the printer pop-up menu, choose the printer. 3 From the
  • Lexmark Prospect Pro200 | User's Guide - Page 54
    clear the selection for Pause Printing. For Macintosh users 1 From the Apple menu, navigate to: System Preferences > Print & Fax > select your printer 2 Click Open Print Queue or Set Up Printers. The print queue dialog appears. 3 Resume the print job: • If you want to resume a particular print job
  • Lexmark Prospect Pro200 | User's Guide - Page 55
    click the document name, and then select Cancel. • If you want to cancel all print jobs in the queue, then click Printer > Cancel All Documents. For Macintosh users 1 Click the printer icon on the Dock. 2 From the print queue dialog, choose the job you want to cancel, and then click Delete. Printing
  • Lexmark Prospect Pro200 | User's Guide - Page 56
    magazine clippings). Tips for copying • When using the ADF, adjust the paper guide on the ADF to the width of the original document. • When using document faceup into the ADF or facedown on the scanner glass. 3 From the printer control panel, press . 4 Press the left or right arrow button to select
  • Lexmark Prospect Pro200 | User's Guide - Page 57
    the instructions on the display. Enlarging or reducing images 1 Load paper. 2 Load an original document facedown on the scanner glass. 3 From the printer control or let the printer automatically detect the paper type. 6 Press . Note: After the copy job is finished, press to reset the settings to the
  • Lexmark Prospect Pro200 | User's Guide - Page 58
    . 6 Press . Making a copy lighter or darker 1 Load paper. 2 Load an original document faceup into the ADF or facedown on the scanner glass. 3 From the printer control panel, press . 4 Press the up or down arrow button to scroll to Lighter/Darker. 5 Press the left or right arrow button to adjust the
  • Lexmark Prospect Pro200 | User's Guide - Page 59
    duplex unit, available only on selected printer models, supports letter- and A4-size paper. If you purchased a model without automatic duplex, or if you need to make duplex copies using other paper sizes, then see the instructions for making a duplex copy manually. Note: You cannot make duplex
  • Lexmark Prospect Pro200 | User's Guide - Page 60
    the left or right arrow button to scroll to 2 to 2. 6 Press to save the first page of the document to the printer memory. 7 Follow the instructions on the display. Making a duplex copy manually 1 Load paper. 2 Load an original document faceup into the ADF or facedown on the scanner glass. 3 From the
  • Lexmark Prospect Pro200 | User's Guide - Page 61
    adjust the ADF paper guide to the width printer will automatically download a list of the scan applications. • You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad. • To assign a computer name and a PIN to the computer, see the Help for the printer software
  • Lexmark Prospect Pro200 | User's Guide - Page 62
    computer, then the printer will automatically download a list of the scan applications. • You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad. • To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your
  • Lexmark Prospect Pro200 | User's Guide - Page 63
    editing application you selected in step 4 opens on the destination computer, and the scan appears within the application as a new file. Using the printer software For Windows users 1 Load a photo or photos facedown on the scanner glass. 2 Click or Start. 3 Click All Programs or Programs, and then
  • Lexmark Prospect Pro200 | User's Guide - Page 64
    the local computer or network computer where the OCR application is installed. • Select to scan to the highest resolution. For Windows users processing application to edit it. Scanning directly to e-mail using the printer software For Windows users 1 Load an original document faceup into the ADF
  • Lexmark Prospect Pro200 | User's Guide - Page 65
    faceup into the ADF or facedown on the scanner glass. 2 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder. 3 Double-click Scan Center or All-In-One Center. 4 From the "What is being scanned?" area on the main screen, select a document type
  • Lexmark Prospect Pro200 | User's Guide - Page 66
    your computer. The printer downloads this application list from your computer when scanning for the first time. If you do not see the application you want on the list, or if you install new applications on your computer, then update the application list in the printer. Updating the application list
  • Lexmark Prospect Pro200 | User's Guide - Page 67
    Canceling scan jobs Press on the printer control panel, or click Cancel on the computer screen. Scanning 67
  • Lexmark Prospect Pro200 | User's Guide - Page 68
    , such as the power supply cord or telephone, during a lightning storm. Setting up the printer to fax Scenario 1: Standard telephone line Check the scenarios below and follow the setup that is applicable to your telephone line. Setup 1: Printer is connected to a dedicated fax line EXT LINE Tips
  • Lexmark Prospect Pro200 | User's Guide - Page 69
    jacks EXT LINE PHONE LINE Tips for this setup: • If you have only one telephone number on your line, or if you do not subscribe to a distinctive ring service, then you need to set the printer to receive faxes automatically (Auto Answer On). • Set the printer to pick up calls two rings after the
  • Lexmark Prospect Pro200 | User's Guide - Page 70
    correct ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically. Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service EXT LINE Tips for this setup: • This setup works best if you subscribe
  • Lexmark Prospect Pro200 | User's Guide - Page 71
    setup if you have a Digital Subscriber Line (DSL). EXT LINE A Digital Subscriber Line splits your regular telephone line into two channels: voice and Internet. Telephone and fax poor quality faxes for the printer, and slow Internet connection on your computer. To install a filter for the printer: 1
  • Lexmark Prospect Pro200 | User's Guide - Page 72
    Scenario 3: VoIP telephone service Follow this setup if you have telephone service from a Voice over Internet Protocol (VoIP) provider. Tips for this setup: • Connect the printer to the port labeled Phone Line 1 or Phone Port on the VoIP adapter. The port labeled Phone Line 2 or Fax Port is not
  • Lexmark Prospect Pro200 | User's Guide - Page 73
    Scenario 4: Digital telephone service through a cable provider Setup 1: Printer is connected directly to a cable modem Follow this setup if you normally connect your telephone to a cable modem. Tips for this setup: • Connect the printer to the port labeled Phone Line 1 or Phone Port on the cable
  • Lexmark Prospect Pro200 | User's Guide - Page 74
    Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the house Follow this setup if your cable provider activated the wall jacks in your house so that you do not have to plug your devices into the cable modem. Your cable telephone service comes from the wall jacks.
  • Lexmark Prospect Pro200 | User's Guide - Page 75
    EXT LINE If the additional device (telephone or answering machine) has an RJ-11 connector, then you can remove the wrap plug and plug the device into the port of the printer. EXT LINE Faxing 75
  • Lexmark Prospect Pro200 | User's Guide - Page 76
    cannot plug a telephone or answering machine into the port of the printer. This is called serial connection. Austria Belgium Denmark France Finland Germany Ireland list, then do not remove the wrap plug from the printer. It is necessary for the proper functioning of the devices on the telephone line.
  • Lexmark Prospect Pro200 | User's Guide - Page 77
    Connecting the printer to a wall jack in Germany The German wall jack has two kinds of ports. The N ports are for fax machines, modems, and answering machines. The F port is for telephones. NFN Connect the printer to any of the N ports. EXT LINE NFN PHONE LINE Faxing 77
  • Lexmark Prospect Pro200 | User's Guide - Page 78
    without sender information, so make sure that you enter this information in your printer. Setting the fax header 1 From the printer control panel, press . 2 Press the arrow buttons to scroll to Fax Setup, and then press . 3 Press the arrow buttons to scroll to Dialing and Sending, and then press
  • Lexmark Prospect Pro200 | User's Guide - Page 79
    the settings that you choose in the fax software, unless you set the printer to block changes made from the computer. Configuring fax settings using the printer control panel 1 From the printer control panel, press . 2 Press the arrow buttons to scroll to Fax Setup, and then press . 3 Configure the
  • Lexmark Prospect Pro200 | User's Guide - Page 80
    in Macintosh 1 From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder. 2 Double-click Printer Settings or Fax Setup Utility. 3 Configure the fax settings using the software. For more information, click Help or ? to view the help information for the
  • Lexmark Prospect Pro200 | User's Guide - Page 81
    Creating a contact list using the fax software For Windows users 1 Click or Start. 2 Click All Programs or Programs, and then select the printer program folder from the list. 3 Click Printer Home > Fax tab > Edit contact list. The Contacts tab of the Printer Setup Utility opens. 4 Click Select from
  • Lexmark Prospect Pro200 | User's Guide - Page 82
    are supported by the fax software. In addition to the software Address Book, you may also have phone books of the mail clients installed on printer folder. 2 Double-click Printer Settings or Fax Setup Utility. 3 Click the Speed Dials tab. • To add contacts, click the Individuals tab. • To add fax
  • Lexmark Prospect Pro200 | User's Guide - Page 83
    . 3 Follow the instructions on the computer screen. For Macintosh users 1 With a document open, choose File > Print. 2 From the Printer pop-up menu, select the fax version of your printer. Note: In order to see the fax options on the Print dialog, you must use the fax driver for your printer. If the
  • Lexmark Prospect Pro200 | User's Guide - Page 84
    ring pattern for the printer. Otherwise, the printer will not receive faxes even if you have set it to receive faxes automatically. Receiving a fax manually 1 Turn off Auto Answer: a From the printer control panel, press . b Press the arrow buttons to scroll to Fax Setup, and then press . c Press
  • Lexmark Prospect Pro200 | User's Guide - Page 85
    FAQ If I skipped the fax setup initially, do I need to run the installer again to set up the fax? You do not need to run the installer again. You can set up and configure the fax through the fax software that was installed with the printer software: 1 Connect the printer to the telephone line. For
  • Lexmark Prospect Pro200 | User's Guide - Page 86
    Ring Pattern Detection (DRPD) service offered by telephone companies, then your fax number is the number that you assigned to the printer. Make sure that you enter the correct distinctive ring pattern for that number in the fax software or in the Fax Setup menu of the printer control panel. If you
  • Lexmark Prospect Pro200 | User's Guide - Page 87
    telephone into the port of the printer. 2 Listen for a dial tone. If you hear a dial tone, then the telephone line is working and properly connected to the printer. If you do not hear a dial tone through both the wall jack and the printer, then see the "Fax troubleshooting checklist" on page 134
  • Lexmark Prospect Pro200 | User's Guide - Page 88
    press . Adjusting the ringer volume 1 Press to scroll back to the Fax Setup menu. 2 Press the arrow buttons to scroll to Ringing and Answering, distinctive ring service, then set the printer to receive faxes manually (Auto Answer Off). This setting lets you receive both voice calls and fax calls,
  • Lexmark Prospect Pro200 | User's Guide - Page 89
    report, every time you send a fax. This report includes the date and time that the fax was sent. If the fax job is unsuccessful, then the report also includes the cause of the error. 1 From the printer control panel, press . 2 Press the arrow buttons to scroll to Fax Setup, and then press
  • Lexmark Prospect Pro200 | User's Guide - Page 90
    ink and print a report only when a fax job is unsuccessful, then select On Error. 6 Press . How do I view the fax history of the printer? You can view the fax history of the printer I forward a fax? 1 From the printer control panel, press . 2 Press the arrow buttons to scroll to Fax Setup, and then
  • Lexmark Prospect Pro200 | User's Guide - Page 91
    an incoming fax to the printer memory before it prints the fax. If the printer runs out of ink or runs out of paper, then you can print the fax later after resolving the error. The printer prompts you if there are faxes to be printed. If an incoming fax or an outgoing fax fails due to power loss
  • Lexmark Prospect Pro200 | User's Guide - Page 92
    Installing the printer on a wireless network Wireless network compatibility Your printer contains an IEEE 802.11n wireless print server. Your printer is compatible with IEEE 802.11 b/g/n routers that are Wi-Fi certified. Supported network security options The printer supports three wireless
  • Lexmark Prospect Pro200 | User's Guide - Page 93
    . 4 Press to select Print Setup Page. The network setup page prints. Information you will need to set up the printer on a wireless network To set up the printer for wireless printing, you need to know: • The name of your wireless network. This is also known as the Service Set Identifier (SSID). • If
  • Lexmark Prospect Pro200 | User's Guide - Page 94
    accessed wirelessly by any other computer on the network. However, you will need to install the printer driver on every computer that will access it. You do not need to configure the printer again, although you will need to run the setup software on each computer to install the driver. For Windows
  • Lexmark Prospect Pro200 | User's Guide - Page 95
    establish communications with the network. - The wireless settings of the printer may no longer be valid. • Green means that the printer is connected to a wireless network and is ready for use. Special wireless installation instructions The following instructions apply to customers outside of North
  • Lexmark Prospect Pro200 | User's Guide - Page 96
    the key you created. 4 Follow the instructions on your screen to complete installation. Assigning a static IP address The printer will be assigned an IP address automatically through DHCP on most wireless networks. 1 Complete the wireless setup, allowing the printer to receive a DHCP address from
  • Lexmark Prospect Pro200 | User's Guide - Page 97
    the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder. 2 Double-click Wireless Setup Assistant. 3 Follow the instructions on the computer screen. Advanced wireless setup Creating an ad hoc wireless network You can set up an ad hoc network if you: • Do not
  • Lexmark Prospect Pro200 | User's Guide - Page 98
    directions for wireless installation. Note: Do not connect the installation or network cables until instructed to do so by the setup software. 6 When the available networks are displayed, provide the network name and the security information you created. The installer will configure the printer for
  • Lexmark Prospect Pro200 | User's Guide - Page 99
    directions for wireless installation. Note: Do not connect the installation or network cables until instructed to do so by the setup software. 21 When the available networks are displayed, provide the network name and the security information you created. The installer will configure the printer for
  • Lexmark Prospect Pro200 | User's Guide - Page 100
    Follow the instructions on the computer screen. Configuring the printer wirelessly using WPS (Wi-Fi Protected Setup) Wi-Fi Protected Setup (WPS) is a method of configuring computers and printers on a secure wireless network. WPS is faster than manual configuration, and it reduces typing errors when
  • Lexmark Prospect Pro200 | User's Guide - Page 101
    . 2 Insert the installation software CD. If the installation dialog does not appear after a minute, then click the CD icon on the desktop. 3 Double-click Lexmark Extras > Lexmark Setup Assistant. 4 Follow the instructions on the computer screen for configuring the printer wirelessly. Note: There is
  • Lexmark Prospect Pro200 | User's Guide - Page 102
    and Print Sharing. See the Windows documentation for instructions on enabling File and Print Sharing. b Install the printer software on all computers that will print to the printer. 2 Identify the printer: a On the computer that is attached to the printer, do one of the following: 1 Click , or click
  • Lexmark Prospect Pro200 | User's Guide - Page 103
    networks that communicate through wireless access points (wireless routers). The printer supports the following methods in connecting to a wireless network: • Personal Identification Number (PIN)-A PIN on the printer is entered into the wireless settings of the wireless access point. • Push Button
  • Lexmark Prospect Pro200 | User's Guide - Page 104
    , and are unable to locate the information in the manual, contact your system support person. What is an SSID? A Service Set Identifier (SSID) is the name that identifies a wireless network. All devices on the network must know the SSID of the wireless network or they will not be able to communicate
  • Lexmark Prospect Pro200 | User's Guide - Page 105
    with your wireless access point (wireless router), see the Web page associated with the wireless access point, or consult your system support person. printers to communicate with each other over a network, they must be connected by cables and/or have wireless network adapters built in or installed
  • Lexmark Prospect Pro200 | User's Guide - Page 106
    you will lose Internet access if you are connected to an ad hoc network. Why do I need an installation cable? When setting up the printer on your wireless network, the printer will need to temporarily connect to a computer using the installation cable. This temporary connection is used to set up the
  • Lexmark Prospect Pro200 | User's Guide - Page 107
    on the back of the printer. This connection allows you to configure the printer for a networked or locally attached installation. 1 Attach the large, to the printer. 3 Continue following the on-screen instructions. How are infrastructure and ad hoc networks different? Wireless networks can
  • Lexmark Prospect Pro200 | User's Guide - Page 108
    setup Finding the signal strength Wireless devices have built-in antennas that transmit and receive radio signals. The signal strength listed on the printer network setup printer with the network during configuration. When you installed the wireless adapter in your computer, the adapter software
  • Lexmark Prospect Pro200 | User's Guide - Page 109
    network setup page. The Quality field indicates the relative strength of the wireless signal the printer is receiving. Drops in signal strength can be intermittent, however, and although the signal quality appears high, it may drop during certain conditions. If you think signal strength is a problem
  • Lexmark Prospect Pro200 | User's Guide - Page 110
    SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID. 3 Compare to set up the printer on the wireless network used by the computer. For Macintosh users with an AirPort base station In Mac OS X version 10.5
  • Lexmark Prospect Pro200 | User's Guide - Page 111
    a device instead of its software. The MAC address is displayed as a hexadecimal number in this format: 01-23-45-67-89-AB. Every device capable of communicating on a network has a MAC address. Network printers, computers, and routers, whether Ethernet or wireless, all have MAC addresses. While it is
  • Lexmark Prospect Pro200 | User's Guide - Page 112
    . This is called the Media Access Control (MAC) address. When installing the printer on a network, make sure you select the printer with the correct MAC address. The MAC address label is located inside the printer. MAC: XX XX XX XX XX XX The MAC address of the internal print server is a series
  • Lexmark Prospect Pro200 | User's Guide - Page 113
    choose About This Mac. 2 Click More Info. 3 From the Contents pane, choose Network. 4 If you are connected over a wireless network, choose AirPort from the Active Services list. How to locate a printer IP address • You can locate the printer IP address by viewing the printer network setup page. How
  • Lexmark Prospect Pro200 | User's Guide - Page 114
    the network at a time, however. The keys are numbered, and the number of a key is referred to as its key index. All devices on the wireless network must be configured to use the same key index when multiple WEP keys are configured on the
  • Lexmark Prospect Pro200 | User's Guide - Page 115
    Home > select your printer > Maintenance tab > Check ink levels For Macintosh users In Mac OS X version 10.6 1 From the Apple menu, navigate to: System Preferences > Print & Fax > select your printer 2 Click Options & Supplies or Print Queue. 3 Click Supply Levels. In Mac OS X version 10.5 or
  • Lexmark Prospect Pro200 | User's Guide - Page 116
    . Using the printer software For Windows users 1 Load plain paper. 2 Click or Start. 3 Click All Programs or Programs, and then select the printer program folder from the list. 4 Navigate to: Printer Home > select your printer > Maintenance tab > Align cartridges 5 Follow the instructions on the
  • Lexmark Prospect Pro200 | User's Guide - Page 117
    necessary. • Deep cleaning uses more ink, so try the Clean Printhead option first to save ink. • If the ink levels are too low, you must replace the ink cartridges before you can clean the printhead nozzles. Using the printer control panel 1 From the printer control panel, navigate to: > Maintenance
  • Lexmark Prospect Pro200 | User's Guide - Page 118
    . Warning-Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of the printer. 4 Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper exit tray. Warning-Potential Damage: Using a damp cloth to clean the
  • Lexmark Prospect Pro200 | User's Guide - Page 119
    and troubleshooting for your printer • Live online technical support • Contact numbers for telephone technical support Setup troubleshooting • "Incorrect language appears on the display" on page 120 • "Printhead errors" on page 120 • "Software did not install" on page 122 Troubleshooting 119
  • Lexmark Prospect Pro200 | User's Guide - Page 120
    release to turn the printer on. Note: Do not release and until Language Selection appears on the display, indicating that the printer has been reset. 3 Complete the initial printer setup. Printhead errors If the "Before you troubleshoot" checklist does not solve the problem, then try the following
  • Lexmark Prospect Pro200 | User's Guide - Page 121
    REMOVE AND REINSERT THE PRINTHEAD 1 Open the printer and lift the latch. 2 WI F I PRINTING 2 Remove the printhead. Warning-Potential Damage: Do not touch the printhead nozzles. 3 Wipe the printhead contacts using a clean, lint-free cloth. Troubleshooting 121
  • Lexmark Prospect Pro200 | User's Guide - Page 122
    , and then close the latch until it clicks. 5 Close the printer. Note: If removing and reinserting the printhead does not resolve the error, then contact technical support. Software did not install If you encountered problems while installing, or if your printer does not appear in the list in the
  • Lexmark Prospect Pro200 | User's Guide - Page 123
    cable. • For a printer that is wirelessly connected, see the Wireless troubleshooting section. MAKE SURE THE PRINT JOB IS NOT PAUSED MAKE SURE YOUR PRINTER IS SET AS THE DEFAULT PRINTER RECONNECT THE PRINTER POWER SUPPLY 1 Turn off the printer. Note: Make sure the printer is not in Power Saver mode
  • Lexmark Prospect Pro200 | User's Guide - Page 124
    reset the power: 1 Unplug the power cord from the wall outlet, and then wait 10 seconds. 2 Insert the power cord into the wall outlet, and then turn on the printer. to wake up the If this problem persists, then check our Web site for updates for your printer software or firmware. Troubleshooting
  • Lexmark Prospect Pro200 | User's Guide - Page 125
    RECONNECT THE PRINTER POWER SUPPLY 1 Turn off the printer, and then unplug the power cord from the wall outlet. 2 Gently remove the power supply from the printer, and then reinsert it. 3 Plug the power cord into the wall outlet, and then turn on the printer. Cannot delete documents from the print
  • Lexmark Prospect Pro200 | User's Guide - Page 126
    Press to turn the printer back on. Paper jam in the paper support Note: The parts inside the printer are sensitive. Avoid printer back on. Paper jam in the duplex unit Note: The parts inside the printer are sensitive. Avoid unnecessarily touching these parts while clearing jams. Troubleshooting
  • Lexmark Prospect Pro200 | User's Guide - Page 127
    pull it out. Note: Be careful not to tear the paper while removing it. 3 Reinsert the duplex unit. 4 Touch DONE or press , depending on your printer model. 5 From your computer, resume the print job. Paper jam in the ADF (selected models only) Note: The parts inside the
  • Lexmark Prospect Pro200 | User's Guide - Page 128
    3 Touch DONE or press , depending on your printer model. 4 From your computer, resume the print instructions that came with the paper.) • Check the loading instructions for your paper or specialty media. REMOVE EACH PAGE AS IT IS PRINTED ADJUST THE PAPER GUIDES TO FIT THE LOADED PAPER Troubleshooting
  • Lexmark Prospect Pro200 | User's Guide - Page 129
    "Before you troubleshoot" checklist does not solve the problem, then try Setup. If there is no Page Setup item on the File menu, then go to step 2. Otherwise, specify your print settings: a From the Settings pop-up menu, choose Page Attributes. b From the "Format for" pop-up menu, choose your printer
  • Lexmark Prospect Pro200 | User's Guide - Page 130
    "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: CHECK THE INK LEVELS Replace low or empty ink cartridges. SELECT A HIGHER PRINT QUALITY FROM THE PRINTER SOFTWARE MAKE SURE THE INK CARTRIDGES ARE PROPERLY INSTALLED ALIGN THE PRINTHEAD CLEAN OR
  • Lexmark Prospect Pro200 | User's Guide - Page 131
    133 Copier or scanner does not respond If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: SET YOUR PRINTER AS THE DEFAULT PRINTER REMOVE AND REINSTALL THE PRINTER SOFTWARE Scanner unit does not close 1 Lift the scanner unit. 2 Remove any
  • Lexmark Prospect Pro200 | User's Guide - Page 132
    CORRECT CORNER SELECT A PAPER SIZE FROM THE PRINTER SOFTWARE THAT MATCHES THE LOADED PAPER MAKE SURE THE ORIGINAL SIZE SETTING MATCHES THE SIZE OF THE DOCUMENT YOU ARE SCANNING Scan was not successful If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the
  • Lexmark Prospect Pro200 | User's Guide - Page 133
    over a network If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following: MAKE SURE THE PRINTER AND THE DESTINATION COMPUTER ARE CONNECTED TO THE SAME NETWORK MAKE SURE THE PRINTER SOFTWARE IS INSTALLED ON THE DESTINATION COMPUTER MAKE SURE "ENABLE
  • Lexmark Prospect Pro200 | User's Guide - Page 134
    hardware, if applicable: - Power supply - Telephone - Answering machine - VoIP adapter - DSL filter - Splitter - Cable modem • If the printer is connected to a Digital Subscriber Line, install a DSL filter for the printer. A DSL filter minimizes interference between the fax signals and Internet
  • Lexmark Prospect Pro200 | User's Guide - Page 135
    Cannot send faxes If the "Fax troubleshooting checklist" does not solve the problem, then try one or more of the following: MAKE SURE THAT YOU HAVE REGISTERED YOUR USER INFORMATION IN THE PRINTER If you did not enter your user information during initial setup, then enter your fax name and fax number
  • Lexmark Prospect Pro200 | User's Guide - Page 136
    also automatically reduces the resolution of the fax to a resolution that the receiving machine can support. To make sure that automatic fax conversion is enabled: 1 From the printer control panel, press . 2 Press the arrow buttons to scroll to Fax Setup, and then press . 3 Press the arrow buttons
  • Lexmark Prospect Pro200 | User's Guide - Page 137
    Cannot receive faxes If the "Fax troubleshooting checklist" does not solve the problem, then try one or more of the following: MAKE SURE THAT YOU HAVE CONFIGURED THE CORRECT SETTINGS FOR YOUR SETUP The fax settings depend on whether the printer is connected to its own fax line or shares the line
  • Lexmark Prospect Pro200 | User's Guide - Page 138
    Windows users and is installed with the printer software only if you select it on the "Install Additional Software" screen during installation. If you did not install the fax software, then the fax tab on the Printer Home takes you to our Web site where you can download the software. MAKE SURE THE
  • Lexmark Prospect Pro200 | User's Guide - Page 139
    are sending. • Lower the fax quality. • Enable Auto Fax Conversion. The fax modem encountered critical Turn off the printer, turn it back on, and errors. then resend the fax. The fax modem of the printer may be busy, or the fax modem may have encountered problems during transmission. Turn off
  • Lexmark Prospect Pro200 | User's Guide - Page 140
    time. Your printer stopped the call because the incoming fax has no sender information. You may have chosen to block faxes with no Caller ID or faxes without Caller IDs are not allowed in your country or region. Disable Block No-ID. To troubleshoot error messages in the fax software, click Help
  • Lexmark Prospect Pro200 | User's Guide - Page 141
    card you are using can be used in the printer. • Make sure the memory card is not damaged. • Make sure memory card contains supported file types. Nothing happens when a memory card is inserted If the "Memory card troubleshooting checklist" does not solve the problem, then try one or more of the
  • Lexmark Prospect Pro200 | User's Guide - Page 142
    is down, then use a USB cable to connect your printer to your computer. Wireless troubleshooting • "Wireless troubleshooting checklist" on page 143 • "Resetting the wireless settings to factory defaults" on page 143 • "Cannot print over wireless network" on page 144 • "The Continue button is
  • Lexmark Prospect Pro200 | User's Guide - Page 143
    then press . 3 Press the arrow buttons to scroll to Reset Network Adapter to Factory Defaults, and then press . 4 Press the arrow buttons to scroll to Yes, and then press . The printer wireless settings are reset to factory default settings. To verify, print a network setup page. Troubleshooting 143
  • Lexmark Prospect Pro200 | User's Guide - Page 144
    over wireless network If you encountered problems while installing, or if your printer does not appear in the printers folder or as a printer option when sending a print job, then you can try uninstalling and reinstalling the software. Before you reinstall the software, check the troubleshooting
  • Lexmark Prospect Pro200 | User's Guide - Page 145
    and printer no more than 100 feet apart. CHECK THE WIRELESS SIGNAL QUALITY Print a network setup page and check the signal quality. If the signal quality is listed as good or excellent, then another factor is causing the problem. CHECK YOUR ADVANCED SECURITY SETTINGS • If you are using MAC (Media
  • Lexmark Prospect Pro200 | User's Guide - Page 146
    SSID of the network that the printer is connected to: a From the printer, print a network setup page. b In the Wireless section, look for SSID. 3 Compare displayed in the Network Name menu. 2 Write down the SSID. In Mac OS X version 10.4 or earlier 1 From the Finder, navigate to: Troubleshooting 146
  • Lexmark Prospect Pro200 | User's Guide - Page 147
    for an updated version of the printer software on our Web site. For more information, see "Installing the printer software" in the User's Guide. You can access the User's Guide from the link at the bottom of the installation screen. RECONNECT THE POWER SUPPLY 1 Turn off the printer. 2 Unplug the
  • Lexmark Prospect Pro200 | User's Guide - Page 148
    may be a problem with your computer and its USB support. The computer must recognize the USB connection in order for installation to work. Cannot print and there is a firewall on the computer Third-party (non-Microsoft) firewalls can interfere with wireless printing. If the printer and computer are
  • Lexmark Prospect Pro200 | User's Guide - Page 149
    try one or more of the following: ALLOW THE WIRELESS INSTALLATION TO COMPLETE Do not attempt to print, remove the installation CD, or detach the installation cable until you see the Wireless Setup Successful screen. ENABLE THE PRINTER Confirm that the printer is enabled: 1 Click , or click Start and
  • Lexmark Prospect Pro200 | User's Guide - Page 150
    's network. If you are not using a unique network name, consult the documentation for your wireless access point (wireless router) to learn how to set a network name. If you set a new network name, you must reset the printer and computer SSID to the same network name. CHECK SECURITY KEYS If you are
  • Lexmark Prospect Pro200 | User's Guide - Page 151
    wireless network depends on many factors, including the abilities of your router and network adapters. If you are having trouble printing, try placing the computer and printer no more than 100 feet apart. You can find the strength of the network signal on the printer network setup page. CHECK MAC
  • Lexmark Prospect Pro200 | User's Guide - Page 152
    wireless network. CHECK THE MAC ADDRESS If your network uses MAC address filtering, then make sure that you include the MAC address of the printer in the MAC address filter list. This will allow the printer shown. e Right-click the connection, and then click Repair or Diagnose. Troubleshooting 152
  • Lexmark Prospect Pro200 | User's Guide - Page 153
    This Mac > More Info b From the Contents pane, choose Network. c From the Active Services problem. MAKE SURE YOUR COMPUTER CAN COMMUNICATE WITH THE PRINTER For Windows users 1 Obtain the printer IP address. a From the printer, print a network setup page. For more information, see the User's Guide
  • Lexmark Prospect Pro200 | User's Guide - Page 154
    must run the printer wireless setup again. The WEP or WPA key, channel, or other network settings may have been manually changed; or the access point may have been reset to factory defaults. Running the wireless setup again can also resolve issues due to wireless configuration errors. Notes: • If
  • Lexmark Prospect Pro200 | User's Guide - Page 155
    the printer folder. 2 Double-click Wireless Setup Assistant. 3 Follow the instructions on the computer screen. Wireless print server not installed You may see a message during installation indicating that the printer does not have a wireless print server installed. If you are sure the printer is
  • Lexmark Prospect Pro200 | User's Guide - Page 156
    , choose About This Mac. 2 Click More Info. 3 From the Contents pane, choose Network. 4 If you are connected over a wireless network, choose AirPort from the Active Services list. How to locate a printer IP address • You can locate the printer IP address by viewing the printer network setup page. If
  • Lexmark Prospect Pro200 | User's Guide - Page 157
    installing the driver on the computer or before running the wireless setup on the computer. To check if the computer is currently connected to a VPN, open your VPN Client software and check your VPN connections. If you do not have a VPN Client software installed, check the connections manually
  • Lexmark Prospect Pro200 | User's Guide - Page 158
    wireless networks use the SSID that the router was originally configured by the manufacturer to use. Using the default SSID can cause problems when more than one network is operating in the same area with the same SSID. The printer work your wireless router has to do. Refer to the manual that came
  • Lexmark Prospect Pro200 | User's Guide - Page 159
    router manufacturer. Check for firmware updates and other advice from the manufacturer. Check the manual that came with your wireless router if you are not sure how to reach the manufacturer Web site. CHECK FOR WIRELESS ADAPTER UPDATES If you are having trouble printing from one particular computer
  • Lexmark Prospect Pro200 | User's Guide - Page 160
    include technical inaccuracies or typographical errors. Changes are periodically made services, except those expressly designated by the manufacturer, are the user's responsibility. For Lexmark technical support, visit support.lexmark.com. For information on supplies and downloads, visit www.lexmark
  • Lexmark Prospect Pro200 | User's Guide - Page 161
    Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective owners. Licensing notices All licensing notices associated with this product can be viewed from the CD:\LEGAL directory of the installation software or service
  • Lexmark Prospect Pro200 | User's Guide - Page 162
    Any questions regarding this compliance information statement should be directed to: Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000 Hinweis zum GS-Zeichen Modell 2W2, 2WE, 2Wn, 2nE Gerätetyp 4443
  • Lexmark Prospect Pro200 | User's Guide - Page 163
    the Lexmark Web site at www.lexmark.com for your local sales office phone number. Product disposal Do not dispose of the printer or supplies in the configured when shipped by Lexmark. Power consumption Product power consumption The following table documents the power consumption characteristics of
  • Lexmark Prospect Pro200 | User's Guide - Page 164
    consumes a small amount of power, then to completely stop product power consumption, disconnect the power supply cord from the wall outlet. Total SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENTS, PROMPTLY RETURN THE PRODUCT UNUSED AND REQUEST A REFUND OF THE AMOUNT YOU PAID. IF YOU ARE INSTALLING
  • Lexmark Prospect Pro200 | User's Guide - Page 165
    or its suppliers, governs your use of any Software Program installed on or provided by Lexmark for use in connection with your Lexmark product. The term "Software Program" includes machine-readable instructions, audio/visual content (such as images and recordings), and associated media, printed
  • Lexmark Prospect Pro200 | User's Guide - Page 166
    of this License Agreement: a Use. You may Use one (1) copy of the Software Program. The term "Use" means storing, loading, installing, executing, or displaying the Software Program. If Lexmark has licensed the Software Program to you for concurrent use, you must limit the number of authorized users
  • Lexmark Prospect Pro200 | User's Guide - Page 167
    , its affiliates, and agents may collect and use information you provide in relation to support services performed with respect to the Software Program and requested by you. Lexmark agrees not to use this information in a form that personally identifies you except to the extent necessary to provide
  • Lexmark Prospect Pro200 | User's Guide - Page 168
    to your Use of the Software Program). To the extent any Lexmark policies or programs for support services conflict with the terms not subject to the Cartridge License Agreement. This Cartridge License Agreement does not apply to cartridges included within the printer boxes of XX75 Series products
  • Lexmark Prospect Pro200 | User's Guide - Page 169
    cord setup service. If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International, Inc. at www.lexmark.com or your Lexmark power sources. This has been identified as a major nationwide problem. It is recommended that the customer install
  • Lexmark Prospect Pro200 | User's Guide - Page 170
    to program this information into your fax machine. South Africa telecommunications notice power sources. This has been identified as a major nationwide problem. It is recommended that the customer install are special conditions for the Facsimile User Instructions. The grant of a telepermit for any
  • Lexmark Prospect Pro200 | User's Guide - Page 171
    services. This equipment shall not be set up to make automatic calls to the Telecom's 111 Emergency Service same number within any 30 minute period for any single manual call initiation, and • The equipment shall go on (nº de référence Lexmark : 14B5109 ou 80D1877) devant être installé sur toute ligne
  • Lexmark Prospect Pro200 | User's Guide - Page 172
    Lexmark International, is: Lexmark International Technology wireless products that contain transmitters, for example, but not limited to, wireless network cards or proximity card readers. Exposure to radio frequency radiation The radiated output power the licensed service, this device
  • Lexmark Prospect Pro200 | User's Guide - Page 173
    est strictement interdite. Pour empêcher toute interférence radio au service faisant l'objet d'une licence, cet appareil doit être utilis garantir une protection optimale. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence. L'installateur de cet
  • Lexmark Prospect Pro200 | User's Guide - Page 174
    safety requirements of EN 60950. Products equipped with 2.4GHz Wireless LAN option are in conformity with the protection requirements of EC RO SE SI SK TR UK Česky Dansk Deutsch English Společnost Lexmark International, Inc. tímto prohlašuje, že výrobek tento výrobek je ve shodě se základn
  • Lexmark Prospect Pro200 | User's Guide - Page 175
    toestel dit product in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Norsk Polski Lexmark International, Inc. erklærer herved at dette produktet er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. Niniejszym
  • Lexmark Prospect Pro200 | User's Guide - Page 176
    run fax software 138 cannot scan to computer over a network 133 cannot send faxes 135 cartridges, ink ordering 12 using genuine Lexmark 12 changing Power Saver timeout 19 changing printing mode 52 changing temporary settings into default 18 changing wireless settings after installation (Mac) 96
  • Lexmark Prospect Pro200 | User's Guide - Page 177
    documents 64 F factory default settings resetting internal wireless print server 143 resetting to 20 failed faxes retrieving 91 fax confirmation page 89 printer memory 91 transmission report 89 fax activity report 90 fax blocking setting 79 Fax button 16 fax error messages Digital Line Detected 139
  • Lexmark Prospect Pro200 | User's Guide - Page 178
    107 ink conserving 6 ink cartridge access 11 ink cartridges ordering 12 replacing 13 using genuine Lexmark 12 ink levels checking 115 inserting a memory card or flash drive 39 installation cable 106, 107 installing network printer 113 installing optional software 25 installing printer on wireless
  • Lexmark Prospect Pro200 | User's Guide - Page 179
    wireless network 142 photos from memory device printing using printer software 42 PictBridge port 9 PictBridge-enabled camera, connecting 43 plain paper 29 poor quality at the edges of page 129 poor scanned image quality 131 postcards 30 Power button 16 Power Saver timeout changing 19 power supply
  • Lexmark Prospect Pro200 | User's Guide - Page 180
    print wirelessly 149 printer does not respond 124 printer memory fax 91 printer printing blank pages 124 printer problems, basic solutions 119 Printer Settings 80 printer software installing 27 uninstalling 26 printer, setting as default 52 printhead aligning 116 printhead access 11 printhead error
  • Lexmark Prospect Pro200 | User's Guide - Page 181
    print 123 printer does not respond 124 printer printing blank pages 124 printhead error 120 software did not install 122 troubleshooting, wireless cannot print over wireless network 144 changing wireless settings after installation (Mac) 96 changing wireless settings after installation (Windows) 96
  • Lexmark Prospect Pro200 | User's Guide - Page 182
    Pics 21 Fax Setup Utility 21 Fax Solutions software 21 Printer Home 21 Printing Preferences 21 Service Center 21 Toolbar 21 Tools for Office 21 Wireless Setup Utility 21 wireless 100, 111 Macintosh 101 printer does not print 148 troubleshooting 149, 157 wireless network adding a printer to existing
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
Prospect Pro200 Series User's Guide
November 2010
www.lexmark.com
Machine type(s):
4443
Model(s):
2W2, 2WE, 2Wn, 2nE