Lexmark T652DTN Clearing Jams Guide

Lexmark T652DTN - Taa/gov Compliant Manual

Get Lexmark T652DTN - Taa/gov Compliant PDF manuals and user guides
UPC - 734646317368
View all Lexmark T652DTN manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark T652DTN manual content summary:

  • Lexmark T652DTN | Clearing Jams Guide - Page 1
    the display. Open doors and covers and remove trays to access jam locations. To resolve any paper jam message, you must clear all jammed paper from the paper path and then press . Jam numbers 200-203, 230 231-239 241-245 250 260 271-279 280-282 283 Area Printer Optional external duplex unit Paper
  • Lexmark T652DTN | Clearing Jams Guide - Page 2
    . Note: If the paper is not easy to remove, then open the rear door and remove the paper from there. 6 Align and reinstall the print cartridge. 7 Close the front cover. 8 Close the multipurpose feeder door. 9 Press . 202 and 203 paper jams If the paper is exiting the printer, then pull the paper out
  • Lexmark T652DTN | Clearing Jams Guide - Page 3
    tab down. 231-239 paper jams (optional external duplex unit) Rear paper jams 1 Push in and hold the latch while pulling up the rear duplex door. Front paper jams 1 Remove the standard tray from the printer. 2 Remove the duplex jam access tray. 3 Remove the jammed paper. 4 Insert the standard tray
  • Lexmark T652DTN | Clearing Jams Guide - Page 4
    the recessed duplex bar. 241-245 paper jams 1 Pull out the tray indicated on the display. 250 paper jam 1 Remove the paper from the multipurpose feeder. 4 Remove the jammed paper. 5 Replace the duplex jam access tray. 6 Insert the standard tray. 7 Press . 2 Remove any jammed paper, and then
  • Lexmark T652DTN | Clearing Jams Guide - Page 5
    up and then out of the printer, and then set it aside. 3 Remove the envelope from the printer. Note: If you cannot remove the envelope, then the print cartridge will have to be removed. For more information, see "200 and 201 paper jams" on page 1. 4 Reinstall the envelope feeder. Make sure it snaps
  • Lexmark T652DTN | Clearing Jams Guide - Page 6
    of the printer. 4 Press down on the staple guard until it snaps into place. 2 Press . 283 staple jam 1 Press the latch to open the stapler door. 3 Use the metal tab to lift the staple guard, and then remove any loose staples. 5 Push the cartridge holder firmly back into the stapler unit until
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
Lexmark™ T65x
Clearing Jams Guide
Clearing jams
Avoiding jams
The following hints can help you avoid jams.
Paper tray recommendations
•
Make sure the paper lies flat in the tray.
•
Do not remove trays while the printer is printing.
•
Do not load trays, the multipurpose feeder, or the envelope
feeder while the printer is printing. Load them prior to printing,
or wait for a prompt to load them.
•
Do not load too much paper. Make sure the stack height does
not exceed the indicated maximum height.
•
Make sure the guides in the paper trays, multipurpose feeder,
or envelope feeder are properly positioned and are not
pressing too tightly against the paper or envelopes.
•
Push all trays in firmly after loading paper.
Paper recommendations
•
Use only recommended paper or specialty media. For more
information, see the
User's Guide
.
•
Do not load wrinkled, creased, damp, bent, or curled paper.
•
Flex, fan, and straighten paper before loading it.
•
Do not use paper that has been cut or trimmed by hand.
•
Do not mix paper sizes, weights, or types in the same stack.
•
Make sure all sizes and types are set correctly in the printer
control panel menus.
•
Store paper per the manufacturer's recommendations.
Envelope recommendations
•
To reduce wrinkling, use the Envelope Enhance menu in the
Paper menu.
•
Do not feed envelopes that:
–
Have excessive curl or twist
–
Have windows, holes, perforations, cutouts, or embossing
–
Have metal clasps, string ties, or folding bars
–
Have an interlocking design
–
Have postage stamps attached
–
Have any exposed adhesive when the flap is in the sealed
or closed position
–
Have bent corners
–
Have rough, cockle, or laid finishes
–
Are stuck together or damaged in any way
Understanding jam numbers
and locations
When a jam occurs, a message indicating the jam location appears
on the display. Open doors and covers and remove trays to access
jam locations. To resolve any paper jam message, you must clear
all jammed paper from the paper path and then press
.
Jam numbers
Area
200–203, 230
Printer
231–239
Optional external duplex unit
241–245
Paper trays
250
Multipurpose feeder
260
Envelope feeder
271–279
Optional output bins
280–282
StapleSmart
TM
II Finisher
283
Staple cartridge
200 and 201 paper jams
1
Push the release latch, and then lower the multipurpose feeder
door.
2
Push the release latch, and then open the front cover.
3
Lift and pull the print cartridge out of the printer.
Warning—Potential Damage:
Do not touch the
photoconductor drum on the underside of the cartridge. Use
the cartridge handle whenever you are holding the cartridge.
4
Place the print cartridge aside on a flat, smooth surface.
Warning—Potential Damage:
Do not leave the cartridge
exposed to light for extended periods.
Warning—Potential Damage:
The jammed paper may be
covered with unfused toner which can stain garments and
skin.
1