Lexmark W840 Quick Reference

Lexmark W840 Manual

Get Lexmark W840 PDF manuals and user guides View all Lexmark W840 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark W840 manual content summary:

  • Lexmark W840 | Quick Reference - Page 1
    Lexmark™ W840 Quick Tips Loading paper or specialty media Loading the 500-sheet tray 1 Pull out the tray. 5 Load print media in the tray with the print side up. 6 Squeeze the side guide tab, and slide the guide until it lightly rests against the edge of the media. 2 Squeeze the side guide tab, and
  • Lexmark W840 | Quick Reference - Page 2
    . 1 Pull out the tray. Note: Make sure the print media is below the max fill line on the rear guide. Overloading may cause jams. 5 Insert the tray into the printer. Loading the 2000-sheet high capacity feeder 1 Pull out the tray. 2 Squeeze the front guide tab, and slide the guide to the correct
  • Lexmark W840 | Quick Reference - Page 3
    tested and approved USB flash memory devices, see our Lexmark Web site at http://support.lexmark.com and click on KnowledgeBase to search for Direct USB printing. 1 Make sure the printer is on and Ready or Busy appears. 2 Insert a USB flash memory device into the USB Direct interface. 3 Press
  • 1
  • 2
  • 3
Lexmark™ W840
Quick Tips
Loading paper or specialty
media
Loading the 500-sheet tray
1
Pull out the tray.
2
Squeeze the side guide tab, and slide the guide
to outside of the tray.
3
Squeeze the front guide tab, and then slide the
guide to the correct position for the paper you
are loading.
4
Flex the sheets back and forth to loosen them,
then fan them. Do not fold or crease the print
media. Straighten the edges on a level surface.
5
Load print media in the tray with the print side
up.
6
Squeeze the side guide tab, and slide the guide
until it lightly rests against the edge of the
media.
7
Insert the tray.
Loading the multipurpose feeder
1
Lower the multipurpose feeder.
2
Pull the tray extension out.
Note:
Do not
place objects on the
multipurpose feeder. Also, avoid
pressing down or applying
excessive force on it.
3
Slide the width guides to the outside of the
feeder.
4
Flex the sheets or envelopes back and forth to
loosen them, then fan them. Do not fold or
crease the print media. Straighten the edges on
a level surface.
5
Load the media in the feeder.
Note:
Make sure the print media is below
the max fill line. Overloading may
cause jams.