Lexmark W850 Quick Reference Guide
Lexmark W850 Manual
View all Lexmark W850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Lexmark W850 manual content summary:
- Lexmark W850 | Quick Reference Guide - Page 1
Quick Reference Loading paper and specialty media Loading the standard or optional 500-sheet trays The printer has two standard 500-sheet trays (Tray 1 and Tray 2), and it may have one or more optional 500-sheet trays. All 500-sheet trays support the same paper sizes and types. Paper may be loaded - Lexmark W850 | Quick Reference Guide - Page 2
Open Door A by pushing the release latch up and lowering the door. 202 paper jam Clearing Area A 1 Open Door A by pushing the release latch up and lowering the door. Clearing Area B 1 Open Door B. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot - Lexmark W850 | Quick Reference Guide - Page 3
203, 230-231 paper jams 203 paper jam 1 Open Door A by pushing the release latch up and lowering the door. 3 Pull the jam up. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Open Door E by - Lexmark W850 | Quick Reference Guide - Page 4
release latch and lowering the door. 231 paper jam 1 Open Door D. 6 Pull the jam up. 7 Close Door E. 8 Close Door A. 2 Remove the jam. 3 Close Door D. 4 4 Open Door A by pushing the release latch up and lowering the door. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the - Lexmark W850 | Quick Reference Guide - Page 5
24x paper jam Jam in Tray 1 1 Remove Tray 1 from the printer. 2 Remove the jam. 3 Insert Tray 1. Jam in the optional tray 1 Pull the tray out. Clearing jam in Door A 1 Open Door A by pushing the release latch up and lowering the door. 2 Remove the jam. 3 Insert the tray. 5 CAUTION-HOT SURFACE: - Lexmark W850 | Quick Reference Guide - Page 6
in Door B 1 Open Door B. 241 paper jam 1 Open Door C. 2 Pull the jam up and toward you. 2 Pull the jam up and toward you. 4 Open Tray 1, and then remove any crumpled paper from the tray. 5 Insert Tray 1. 250 paper jam 1 Remove the paper from the multipurpose feeder. 3 Close Door B. Note: Make - Lexmark W850 | Quick Reference Guide - Page 7
-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 2 Pull the jam up and toward you. 5 Remove the jam. 6 Close Door F. 282 paper jam 1 Open Door F. Note: If the jam does not move immediately, stop - Lexmark W850 | Quick Reference Guide - Page 8
error 1 Open Door G. 3 Firmly pull the colored tab to remove the staple cartridge. 6 Press down on the staple guard until it snaps securely into place. 2 Hold the lever on the staple cartridge clear covering on the bottom of the cartridge holder to make sure no staples are jammed at the entrance. - Lexmark W850 | Quick Reference Guide - Page 9
28x paper jam 284 paper jam 1 Open Door F. 2 Remove the jam. 3 Close Door F. 4 Open Door G. 5 Remove the jam. 6 Close Door G. 7 Lift Door H. 9 8 Remove the jam. 9 Close Door H. 285-286 paper jams 1 Lift Door H. 2 Remove the jam. 3 Close Door H. - Lexmark W850 | Quick Reference Guide - Page 10
287-288 paper jams 1 Open Door F. 2 Remove the jam. 3 Close Door F. 4 Open Door G. 5 Remove the jam. 6 Close Door G. 10
Laser Printer
Quick Reference
Loading paper and
specialty media
Loading the standard or
optional 500-sheet trays
The printer has two standard 500-sheet trays (Tray 1 and Tray 2),
and it may have one or more optional 500-sheet trays. All
500-sheet trays support the same paper sizes and types. Paper may
be loaded in the trays in either the long-edge or short-edge
orientation.
1
Pull the tray completely out.
2
Squeeze and slide the width and length guides to the correct
positions for the paper size being loaded.
3
Flex the sheets back and forth to loosen them, and then fan
them. Do not fold or crease the paper. Straighten the edges on
a level surface.
4
Load the paper stack with the recommended print side faceup.
Load the paper in either the long-edge or short-edge
orientation as shown.
Notes:
•
Load sizes larger than A4 in the short-edge orientation.
•
Make sure the paper is below the max fill line located on
the edge of the paper tray. Overloading the tray can cause
paper jams and possible printer damage.
5
Make sure the paper guides are secure against the edges of
the paper.
6
Insert the tray.
7
If the paper type you loaded differs from the type that was
previously loaded in the tray, then change the Paper Type
setting for the tray.
1