Lexmark X204N User's Guide - Page 106
Network Reports menu, NPA Mode, Network Buffer, Mac Binary PS, Std Network Setup, Net <x> Setup
UPC - 734646157643
View all Lexmark X204N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Menu item Description NPA Mode Off Auto Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: • Auto is the factory default setting. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated. Network Buffer Auto 3K to Sets the size of the network input buffer Notes: • Auto is the factory default setting. • The value can be changed in 1-K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the Network Buffer, disable or reduce the size of the USB buffer. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is updated. Mac Binary PS On Off Auto Sets the printer to process Macintosh binary PostScript print jobs Notes: • Auto is the factory default setting. • The Off setting filters print jobs using the standard protocol. • The On setting processes raw binary PostScript print jobs. Std Network Setup Reports Network Card TCP/IP IPv6 Net Setup Reports Network Card TCP/IP IPv6 For descriptions and settings of the network setup menus, see the following: • "Network Reports menu" on page 106 • "Network Card menu" on page 107 • "TCP/IP menu" on page 107 • "IPv6 menu" on page 108 Network Reports menu This menu is available from the Network/Ports menu: Understanding printer menus 106